No number range assigned

Hi,
There is no number range assigned to document type but still it is picking number range from VN01
From where it is picking????
Regards,
Amol

Amol,
Definitely there is z program, i tried to raise a sales order with both no. ranges removed. It is throwing an eror
For object RV_BELEG , number range interval does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code:
Regards
Sathya

Similar Messages

Excise invoice number range assignment

Dear SAP Gurus,
This is with regarding Excise invoice number range assignment (J_1IINTNUM, J_1IRG23A1, J_1IRG23A2)
For the financial period April 2011 to March 2012, following number ranges exist already in SNUM.
01---- 2011--5007393-5999999
01---20125016369-5999999
Till 31st March 2012, excise number ranges doesn't change. But for the next financial period from April 2012 to March 2013 there would be a new set of number ranges.
At the time of April 2012, I will have to change the number ranges as per the new financial period. In such a case, I would be unable to change the number ranges for the financial year 2012, as the system would throw an error as "Lower limit can only be changed during initial entry"
How to change the number range for the financial period April 2012 to March 2013, in this above scenario?
Also can you please guide me on how to map the number ranges so that from April 2012, the system would start taking the new number ranges instead from January?Thanking you in advance..
Regards,
Vijay N

Dear Mr. Lakshmipathi,
Thank you for your reply.
Currently, system consider the 1st one till December 2011 and for the upcoming months from Jan 2012 to March 2012, it takes second one. This is my problem here.
01---- 2011--5007393-5999999
01---20125016369-5999999
I want the system to consider the 1st one for the period from April 2011 to March 2012 and 2nd one for the period from April 2012 to March 2013. Right now, it takes for the period Jan 2011 to December 2011. Since Jan 2012 has been initiated, system is throwing an error stating to create number ranges for 2012, hence I have created the second one.
Thanking you in advance.
Regards,
Vijay N

Error in number range assignment

Hi,
When I try creating a process order, I get the below error : ERROR OCCURED IN NUMBER ASSIGNMENT FOR OBJECT RESB. There is no problem with the number range, i.e. number ranges are assigned to the order type. Any solution?
Regards,
Sakthy

Hi,
check table NRIV object RESB (which number range assigned, whats the highest number assigned) and compare it with table RESB. If the highest number in RESB is higher than the status in NRIV you know the reason for the message.
best regards, Christian

Post depreciation with external number range assignement

HI
When i am running Depreciation run AFAB, i am getting error"created doucment number range with internal assignement.
Currently the number range assigned for documents is external.
Why this error is coming... please provide solution without changing number range to internal..
Thanks and regards
Ramarao.p

HI
see the SAP document .....
Specify Document Type for Posting of Depreciation
In this processing step you determine the document type for each company code for posting depreciation.
Standard settings
SAP supplies document type AF for depreciation posting.
Requirements
You must have defined the document number ranges.
Activities
1. Check the standard document type AF. If needed, define your own document type.
2. Specify the document type for depreciation posting. The document type you select must meet the following conditions:
It must be a document type for batch input.
It must be defined with external document number assignment
So please provide the solution ...with out changing internal number range...
Thanks and regards
Ramarao.p

Picking request Number Range Assignment

I am looking for picking request number range assignment?
In Logistics execution we can define the number range, for pciking request but where to assign it?
I request all the SD Guru's to have a look. I find it pretty challenging.
Please reply to the subject asked.
Best Regards,
Bashir
Edited by: Bashir on Jan 12, 2010 11:18 AM

Dear Friend
I feel the picking request number is automatically generated by the system ( If it is not a transfer order that is not warehouse managed )
The logic is system takes the picking date
Today if we pick that is 12.01.2010
The picking number is 20100112 (yyyy/mm/dd)
No matter how many delivery documents we create today the picking number will be 20100112
If the picking date is 11.01.2010 then
picking number is 20100111 (yyyy/mm/dd)
If the picking date is 21.12.2009 then
picking number is 20091221 (yyyy/mm/dd)
Regards
Raja

BP creation in CRM WebClient - Role and Number Range assignment

Hello,
I have the requirement to specify a particular number range and BP role when an Account is created in the CRM WebClient Interface.
For example as standard, when an employee is created through the CRM WebClient (BSP component BP_EMPL) the default employee role (BUP003) and the default number range are assigned to the BP.
I would need to specify a different number range and role to the employee
I've tried to configure the Account Identification profiles (activity "Define Account Identification Profiles" in customizing); with that activity you can specify which role and which number group you want to use for the BP (account) creation. However this customizing is affecting the IC WebClient only and not the CRM WebClient.
I was wondering if a similar customizing activity exists for the CRM WebClient (in particular for the BP_EMPL application), or if there's a way around this.
Anybody has an idea about how to solve this?
Any help would be greatly appreciated, thank you in advance.

Hi all,
I have done this by defaulting the bp group in the BADi
1.Go to the se18 and select BADI_CRM_BP_UIU_DEFAULTS and select the interface IF_UIU_BP_DEFAULTS
2. Go to the method IF_UIU_BP_DEFAULTS~GET_DEFAULT_VALUES and you can write your logic here to default the grouping.
In my case I wanted all accounts created to be defaulted to a particular grouping and my code looks like this
lv_name1 = lr_current->get_property_as_string( iv_attr_name ='BP_CATEGORY' ).
                    IF lv_name1 IS NOT INITIAL.
                      IF lv_name1 = '2'.
                        lr_current->set_property( iv_attr_name = 'BP_GROUP'
                                   iv_value = '0060' ).
                      ENDIF.
                    ENDIF.
Thanks & Regards,
Sanila

Automatic number range assignment for creation of material issue

Hi Experts,
I need to create material with automatic assignment of internal and external number range .
Already existing logic for one exit which is working fine in one system and I am using that same logic in other system
where it is not working and throuhging the following error:
"Internal number assignment is not possible for the material type Operating supplies"
Can you please suggest where i am dong wrong ?
Thank you in advance.

Hi,
Please slect material type operating supplies click on detaials. check the external number assignment w/o check checkbox
Regards
AKM

Objects Number Range Assignment

Hi Gurus,
Please guide me how to view the differnt number range that are been assigned to different Object
I have C,S,O which has different differnt set/series of numbers assigned to them.
I am aware of V_I77IV and the SPRO ORG . Management setting also , But it only shows the symbols, $$$$   IN   EXT , $$C IN EXT , $$O   IN EXT , $$C   IN EXT.
No where i could see the number ranges like say Org-90000000-90000050 ,Position 80000000-80000650 etc.
Your Guidance would be highly appriciated.

Hi,
I guess I have responded to your original question which was were can I see OM ranges.
Your system should have in T77IV View
Subgroup          Internal Number Assignment     External Number Assignment
$$$$               IN                              EX
$$A               IN                              EX
$$BU               IN                              EX
$$C               IN                              EX
$$O               IN                              EX
$$Q               IN                              EX
$$QK               IN                              EX
$$S               IN                              EX
$$T               IN                              EX
And OM ranges should have existing subgroup
$$$$
$$A
$$BU
$$C
$$O
$$Q
$$QK
$$S
$$T
And each subgroup should have two entries
Range     From number     To Number     Current number          Internal (' ') or external ('X') number
EX     low value     high value        0               X
IN      low value     high value        current value
This is before any PD/OM objects are created.

Number Range assignment to Org plan/model

Hi,
have a question on number ranges w.r.t Org plan.
in CRM 5.0, my number assignment is independent of all plan versions (maintained 'X' in t.code OONC).
Now I want to create a new number range and assign it to the new org model/plans that I will be creating - how do I do it.
I could define the new number range but am not sure how to assign this to the org plan. If I explain it the other way, how does the Org plan determine which number range it has to use ?
will reward points.
thanks
kumar

Thanks Robin for your response. I did reward points to you. Its useful to understand HRALX-OSUBG function.
I did assign the new number range id here as per your message and saved but when I try to create the new Org model/plan, it still takes my old range - is there any dependency as well that I need to change?
One more observation, on the same table T77S0, I have the value '1' for HRALX-ONUMB.
I changed HRALX-ONUMB to '2' and then maintained HRALX-OSUBG with the Z1 number range (custom), but still my Org model determines the old number range?
Could you suspect something?
thanks
Kumar

Number range assignment

hi
dear all
at the time of assign internal number range for PR system gives message " PL.ENTER VALID INTERNAL NUMBER RANGE"
kindly help.
thanks
debojit

Hi ,
Please ensure you assign 1) Valid number range 2) check the number range what u are assigning is the internal or external.
Create number range in IMG MM->Purchasing->PR-> Number ranges . external box should be unchecked for internal numbers.
Assign the number range in the settings for PR doc types....
Regards
Mani

Problem in Miro number range assignment

Dear Gurus,
Iam facing the problem in MIRO generation i have to assign no ranges for miro please assist me how can i assign the miro numberranges.
Regards
Hari kumar

Hi
For LIV document, maintain number range number, year (may be till 9999) and from & to number u=in transaction OMRJ.
Maintain the number range number for the transactions RD & RJ.
Path: IMG--> Matl mgmt --> LIV --> Incoming invoice --> Number assignment --> Maintain Number Assignment for Logistics Documents
warm regards
sairam akundi

Problem in number range assignment to equipment category

Hi Gurus,
I have created equipment categories & now want to maintain no. range for them. But by mistake i have assigned the categories to standard no. range group (PM) .Now i want to reverse it by deassigning to its original place.Please suggest me the way how i can do it so that i can create a new no. range group & assign equipment categories there.
Also to activate the check box for external number range i am not able to activate or deactivate the check box.Please suggest for this problem also.
Regards,
Vivek

Dear,
For deassigning to it's orignal place
Select the category
Press the select element or F2
Select the Not Assignt (at bottom of the screen)
Press the Element/Group or F5
For creating a new no. range
Select Group at Menu Bar
Select Insert
Now give he Text and give the no. range
u can not activate or deactivate External check box. See there are two lines if u want to give external no. range then assign the no. range at second line where external no. range check box is already activated.
Regards
Sunil

Regading purchase order number range assign & migo no.range assign

Hi,
Can any body suggest me , Where we assign number range for Purchase order after creation of number range?
And also where we define number range for MIGO posting, if any objects for that then give me deatils plz.
Regards,
Sohail

Hi
SPRO>Materials Management>Purchasing>Purchase Order>Define Number Ranges and assign the same in Define Document Types
,Assign the number range against the relevant PO document type
For MIGO
SPRO>Materials Management>Inventory Management and Physical Inventory>Number Assignment>
or Use OBF4 Tcode
Regards
Amuthan M

Batch Numbers Skipping in Internal Number range Assignment

Dear Gurus,
We have Batch Management at Material Level. For a Material, we are facing an issue in Internal Batch Number Assignment. Systems Skipping 15-20 numbers buffer in Internal Number Assignment, we want it to be in a sequence. In OMAD for BATCH_CLT, No of Numbers in Buffer is 0.
Kindly guide me why the system is doing this.
Regards,
Johi Kapoor

No its not working. I want to set my batch number range from client level to material level. Kindly tel me how can i do that....?

OM- Number range assignment for Plan Version

Hi all,
What should be the entry in table T77S0 -
NUMRG COMP Number assignment for all plan versions.
Whether it should be set to 'X' or Blank?
I read the documentation but could not undestand properly.
Thanks.

Hi,
Suppose if the value of NUMRG COMP is space then assigned number range will be used across all plan version's for different OM objectts.
And if the value of NUMRG COMP is 'x', Then each plan version will have different set of object range.
This has to be specified in OONR transaction.
Thank & Best Regards,
IFF
Edited by: IFF on May 11, 2010 10:08 AM
Edited by: IFF on May 11, 2010 10:09 AM

No number range assigned

Similar Messages

Maybe you are looking for