No ODBC recognised after Updater 2

hi there
I have CFMX7 installed on Win2003 Standard R2 64 bit
installed.
I did install a system DSN which I could also install as a
data source in CF admin.
5 days ago I installed updater2 on this machine.
Today, I created a new ODBS System DSN and went to CF admin
to register it.
However, this time, the new DSN does NOT show up in the drop
list after having selected ODBC socket.
I even restarted the server and checked and removed/recreated
the system DSN. Everything there is ok, I also checked the
registry.
Only CF admin would still not list the DSN. Is this a bug?
Anyway, where does CF store its ODBC stuff? I NEED to
register several DSNs ... no matter how.
Urged,
Martin

A colleague found that the link to the uninstall is available
from the page where ColdFusion 7.02 is downloaded. First click on
release notes and then on the "part 2" link at the top of the page.
The direct link is here:
http://www.adobe.com/support/documentation/en/coldfusion/mx702/cf702_install.html.
He ended up reinstalling 7.02 because the uninstall did not go
well. CF started up by there were some errors at the bottom of the
pages.

Similar Messages

Batteries not being recognised after update!!

My OS seems to be messed up! I updated my battery while running on 10.4.3, and it asked me to remove battery and plug it back in and restart.
I did that, but now my battery is simply not recognised??? I tried plugging in the other battery but that too is not being recognised! Though both batteries run and I am able to use laptop without powerchord.. but once the battery runs out, i need to plug in powerchord and this does NOT charge the battery.
This is bad, as now I have 2 batteries which are not recognised after the update!?? I even tried updating to 10.4.4. Doesn't help!

Got it.
Try running the firmware update for the battery again.
The first couple of times I tried the firmware update failed. With the firmware update window open but in the "didn't work" mode, remove the battery and replace it and then hit the update button again. Took a couple of times but I got it to work, the computer recognized the battery and all is smiles again.
Jim
Two, 15" pb's
Two, 17" pb's
G5
Imac

Videos not recognised after updating software

My iPod won't sync my videos. This is for all video files (.mov, .mpv, the lot). They played fine on my video iPod before and they still play in iTunes, but when I try to update, I just get a "file not recognised by your iPod" message. This only happened after I installed the latest updates.
I'm on OSX 10.4.10, latest iTunes and iPod software. This is really annoying-- should have known better than to update mac software when prompted, I guess.

I have almost the same problem - After I had updated, I could still play my music videos on my ipod, but I couldn't download to the ipod. Now, after doing a reset, all video podcasts and new videos appear to be on the ipod but when I play them all I get is the audio track, even for 'old' videos I played before. This applies to movies and tv programs as well, which has upset me more than anything else as the movie I have on my ipod is a short one of my daughters wedding. Come on Apple - put this right - or has anyone else come up with a solution??

Ipod not being recognised after updating software on it

i bought the ipod some 3 months back and it worked fine all these days until 2 days back when i connected it to my friend's computer to use it as a disk.
A dialog box popped up as soon as i connected the ipod saying i could either update or restore the software on the ipod....i chose update and then when i connected the ipod to my computer again,it was not recognised by the system or itunes....and though the space which was earlier filled was still occupied,i couldn't find even a single playlist in the ipod when i tried to use it... i gather that the files are still in the ipod,but somehow i am unable to view or use them.plz help me in this regard
compaq Windows XP
compaq Windows XP

I have the same issue, have you found a solution?
no...i am still looking for help regarding this issue

Error 0x8000066- Ipod not recognised after updating!!

Hi
can anyone help me with this error!! Was updating my sons ipod when the cable came loose. when I plugged it back in it said it was returning it to its factory settings. Now itunes is telling me it doesnt recognse the device because of this error- code above
Can anybody help?
Thanks!!

I wouod start here:
http://support.apple.com/kb/TS1495
(iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)
http://support.apple.com/kb/TS1538
(iPhone, iPad, or iPod is not recognized by Windows due to driver installation issues)
I searched the forum but could not find the same error number you received.

Iphone 4s not recognised after update 7.1.1.

I cannot connect to itunes, I need to get a driver, where can I find this

Hello Peter0123,
I understand that your iPhone 4s is not recognized by iTunes. The following article may help to resolve your issue, including searching for available drivers:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

IPad 2 won't sync after update to 5.1 and iTunes 10.6.0.40

Upgraded iPad2 to 5.1 and Windows iTunes to 10.6.0.40. iTunes doesn't recognize the iPad as a device, but does recognize the camera. Tried all iPad troubleshooting steps (restarting both, reinstalling iTunes, tried various USB ports). Any ideas?

Hi G-whiz,
I solved the same problem (iTunes 10.6.0.40 upgrade on MacBook Pro). iOS 5.1 for iPhone and iPad, not recognised after update, even after rebooting each device in isolation and then all together. Still did not work.
For me the issue was: The MacBook Pro was running BT with wireless kbd and touchpad connected; also I had a large flatscreen running from the mini display connector.
Aiming to minimise any driver conflicts (even if external monitor and BT drivers are not third party), I followed these steps:
1. disabled bluetooth
2. disconnected external LCD
3. rebooted MacBook Pro (wifi still enabled before restart to get to iTunes Store)
4. connected iPad and iPhone to power (before upgrading to iOS 5.1 they had been set to wifi sync when on power)
5. started iTunes
Voila! Devices recognised automagically! And beginning sync instantaneously.
bauhws

After updating to 7.0.6 my iphone no longer shows in itunes. However it is recognised by my PC (windows 8) when click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date. Has anyone else had this problem?

Hi guys. After updating to 7.0.6 my iphone 5s is no longer showing in itunes. Strangley it is recognised by my PC (windows 8) when I click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date, but this has made no difference. Has anyone else had this problem or does anyone have any advice? Thanks

Device not detected in iTunes for Windows

After updating itunes on my laptop, my ipod is not recognised

after updating itunes on my laptop, my ipod is not recognised by windows or itunes

See:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

After updating my iphone5, my phone went back to factory setting and now I can't sign in with my apple id because it does not recognise it... Help?!

After updating my iphone5, my phone went back to factory setting and now I can't sign in with my apple id because it does not recognise it... Help?!

Yes, my telco is an approved carrier. If my phone was brand new, I think so, they opened it in front of me.. I really couldn't remember it was 1.4 years ago. It did seem new.
Well it says, "_____" cannot be used to unlock this iphone. I've tried both my apple ids but it didn't work.

Iphone crashed after update it wont recognise itunes when plugged in and do anything besides display itunes needs to be connected

iphone crashed after update it wont recognise itunes when plugged in and do anything besides display itunes needs to be connected please help

"I bought it a couple of weeks ago"
Bought it from where? I ask because given what you have already tried, it would appear that this iPod needs either service or exchanging for another one.
Did you buy this as new from a reputable source?

IPod Touch 4th Gen froze on restore after updating to 5.0 and iTunes doesn't recognise my iPod now??

After updating to 5.0 my ipod is not recognised in iTunes and I lost everything on it. I have attempted several restores but it just freezes and now all I have is a usb plug on the screen and can't use it!! I have tried the holding button thing, uninstalling and reinstalling iTunes, using a different usb port and nothing works. I have even left it to restore over night and it hasn't moved. iTunes is enabled in my firewall and I am running an iTunes diagnostics atm. Help!

My ipod tunred white screen, but im not using it when it happens

Search takes 3 times to recognise internet connection after update

Hi - after updating to iTunes 7.1.1 the Search works only after 3-4 attempts. The error is that it doesnt recognise that I am connected to the Internet and asks me to check my network settings. Only after I press Search 3-4 times does it work. Occassionally it will work 1st time but then I click on a search result and the same thing happens.
I've used iTunes for a few years now and it only happens since this upgrade. The only change I made is adding a Bluetooth dongle to connect to my Nokia phone. Any ideas out there?
Thanks!
Mesh Windows XP Pro

I have, bu it still doesnt work. I called Apple support because Im really out of options. awww man...

After updating os to 10.9.1can't open pdf files. I get a message saying It may be damaged or use a file format that Preview doesn't recognise. I can still read older saved files but no new ones arriving by email. Any help would be appreciated.

After updating os to OSX 10.9.1 I can't open any new pdf files. I get a message saying It may be damaged or use a file format that Preview doesn’t recognise. I can still read older saved files but no new ones arriving by email. Also can't attach a pdf to an email to send out. Any help would be appreciated.

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

No ODBC recognised after Updater 2

Similar Messages

Maybe you are looking for