No of records in PSA-ODS

Hi Friends,
           I'm trying to get the same number of records as my PSA into my ODS, I played arround with all the keys possible  but still dont see the count to be the same, I know data gets aggregated whn using ODS ,But this is my requirement, which is supposed to be the first layer of EDW( where the number of recs from R/3 should be the same as ODS)
Your input is really appreciated.
thanks in advance,

Here KJ ,
@5B@     2     133     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007001     KBFC               P     USD     100.75                    1
@5B@     2     134     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007002     KBFC               P     USD     100.75                    1
@5B@     2     135     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007003     KBFC               P     USD     100.75                    1
@5B@     2     136     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007004     KBFC               P     USD     100.75                    1
@5B@     2     137     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007005     KBFC               P     USD     100.75                    1
@5B@     2     138     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007006     KBFC               P     USD     100.75                    1
@5B@     2     139     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007007     KBFC               P     USD     100.75                    1
@5B@     2     140     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007008     KBFC               P     USD     100.75                    1
@5B@     2     141     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007009     KBFC               P     USD     100.75                    1
@5B@     2     142     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007010     KBFC               P     USD     100.75                    1
@5B@     2     143     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007011     KBFC               P     USD     100.75                    1
@5B@     2     144     NK01     111000100     239001005     552610     450     NOT RELEVANT     NOT RELEVANT          0     9H          86     N6     2007012     KBFC               P     USD     100.75                    1

Similar Messages

  • Database changes between data records of PSA

    Hi all,
    Does anybody know a way, how to flush or commit database change between processing each data record from PSA by transfer rules?
    I have some routines in transfer rules (updating attributes of master data from datasource), where I need values from exactly previously processed data record. But SELECT from /BIC/Q... table gives me no changes of these values
    Command of selection is written correctly, because it gives me new values in next run of DTP process.
    And little explanation, what I'm trying to achieve:
    In PSA  I have account, date and value and I need count, how this value changed for a concrete day and store this value to time-dependent attribute of master data. All data records with the same key (duplicate record) overwrite the result of previously one, so only last one is stored in master data.
    Shortly, I need something like aggregation ADDING of routine in transfer rule detail, but able to catch duplicate records.
    Thank you for any idea.
    Regards, Filip

    Some note about investigation process.
    I tried change my data flow and made the same transfer rules from data source to ODS, if it will behave in different way.
    I have found data records correctly collected (agregated) in New data of ODS, but EMPTY in active data! So I think, the something similar happend in case of updating master data, and that's why I didn't saw any agregation.
    There is no need to call-out database changes, but this problem is kind od anythink else
    This shoud be for a new thread, but how can keyfigures become empty after activation?? I've searched forum and found only a case, when End routines are implemented and they skip update rules, whitch are initial. This is not my case.
    Nice to hear from you any ideas. Thankx for reading.
    Filip

  • How to find a record in PSA

    hi all,
    tell me the steps how to find a record in PSA.suppose there are >20 data packages..how can i find out that specific record from those datapackages with out knowing datapackage..
    thanks,
    jack

    Hi Jack,
    It so happens that when data is pulled into the PSA there will be no specific order. Hence it is impossible to know which record is present in which data package.
    But if you want to know how many error records are there and what are those there are always options of selecting all the packets and display only erraneous records.
    Regards,
    Pramod

  • Editing error records in PSA

    Hi All,
    While loading data from R/3 datasource to PSA in BI side, the data load got failed due to invalid character present in the data.
    When i tried to edit that error record in PSA i found that the entire datapackage containing the error record is skipped from updating into PSA. So i'm unable to edit that error record in PSA.
    Is there any setting that needs to be done so that error records gets updated in PSA, so that we can edit it at PSA level and load further to datatargets.
    Thanks in advance.

    Hi,
    If PSA contain data records and if the records present in PSA contain invalid characters then the error would pop out.
    But in your case you say that the error records are not visible in the PSA but you face the error!!!!
    Check in the status and detail tabs in the infopackage maintenance screen to confirm the exact error that you face.
    Please check the data present in your PSA via table. The table name of PSA starts with /BIC/B000*.
    There is a possibility of the data present in the PSA could have got archived too.
    Regards,
    Lakshminarasimhan.N

  • Query regarding the data type for fetcing records from multiple ODS tables

    hey guys;
    i have a query regarding the data type for fetcing records from multiple ODS tables.
    if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
    can any one help with some suggestion.

    Hi Mudit,
    One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
    AS is used to rename the column name when data is being selected from your DB.
    So, the query  Select ename as empname from emptable will return the data with column name as empname.
    Regards,
    Bhavesh

  • Error with calendar date being extracted : PSA - ODS - cubes correction

    Hello to all,
    I have an issue with incorrect calendar date being captured by BW.
    Here is the analysis:
    We have red request into the invoice cubes because of incorrect calendar date.  It has been found that the process is done via PSA -> ODS -> Cubes
    How will I do the correction?  Kindly specify on whether or not to change the status of the red QM status in the cubes.  Also with the data mart status of ODS and the request of ODS?  What status(has to be changed)? what request has to be deleted?  Thanks.

    Hi, 
    What I did:
    changed QM status to green of the Info Cubes
    deleted the green status of requests in the Info Cubes
    deleted the Data Mart status of ODS
    deleted the request of ODS
    edited manually the data into the PSA
    started the update immediately
    Then....
    I will wait if the request will be updated in ODS?
    Then
    I will check if the delta job from ODS to cube will proceed right?
    Please advise.  Thanks.

  • How to display all incorrect records in PSA

    Hello,
    Is there a shortcut to display all the incorrect records in PSA. I am aware of a particular value that has been posted incorrectly and we're pulling over a million records from R/3. Each time i run the update, it fails due to the same data value error. This is prod env and i'm running delta init after a transfer rule change.
    Pls. help.
    Malli

    Hi malli
    I was facing the same problem. But i just asked my end user to make the changes in his data entry so that there were no errors while extraction itself.
    One more thing what you can do if u know the exact data error is to write one select statement on the PSA table where the condition is the error what ur facing daily. There are no other shortcuts to see a error record in PSA unless untill u face problem while updating the data target. in that case the record in PSA will be in in status red and you can filter for this record.
    Hope i made certain things clear. Please post if u r not convinced.
    Regards
    Sriram

  • How many days we can store the data  in psa & ods ?

    hi guru's
    how many days we can store the data  in psa & ods ?
    Thanks & Regards.
    Prabhakarreddy

    Hi Prabhakarreddy,
    As many days as you like:
    In the PSA you can keep data as long as you like but you will need more and more disk-space. So its advisable to clean up from time to time.
    Example:
    PSA's from full loads Clean up in a weeks time,
    PSA's from Deltas: Clean up after you are sure data is correct. (e.g. a month or 90 days)
    Remember that you cannot do a reconstruction from dataloads of which you have deleted the PSA. If some thing is wrong you will have to do an Init again!
    In ODS's you must keep data in order to keep your delta loads to cubes in order. Removing data will force you to do a new initial load.
    Sometime companies delete old data form ODS's that is older than a certain period (e.g. more than 3 years old) by running a selective deletion. You will have to do an init again. But loads and activation may run faster and of course you gain on disk space.
    Udo

  • Standard report which gives Record count of ODS, Cube and Source system.

    Hi-
    Is there any standard report which gives the record count of ODS, Cube and Source system?
    or
    If any one has ABAP program which takes care of record count pls let me know.
    Thanks in advance

    I don't understand. You need to check the data loads. What for do you want a list of ODS, Cubes and sources systems?
    You can use messages from process chains to monitor the data loads.
    You can also use an abap program inside teh process chains to save data into a table and then an abap report to see if everything went OK.
    But, thinking again, you may be able to use BW statistics to get some of the information you need. Check the help for BW statistics, it might give you an idea of what you can do.
    Regards,
    Diego

  • Erroneous records in PSA

    Hi All,
    How to handle erroneous records in PSA. Should I consult R/3 consultants to correct them...

    Hi,
    this depends on the type of error.
    Conversion errors and similar things can be corrected in the transfer rules, real data errors needs to be corrected in the source system itself and so normally by the responsible r/3 guy.
    regards
    Siggi

  • How to find erroneous records in PSA in BI 7.0

    In BW 3.5 if load fails for some reason like lower case or unidentified character   data is edited in PSA n loaded from there.
    We have an option to check for only erroneous records  in PSA separately.
    How can that be possible in BI 7,0 because loading will be done till PSA using an infopackage n it will not fail for such reasons.
    I cant go check for each record in PSA which is to be edited after DTP failed .
    Please explain

    HI,
    Below link exactly answers you Q
    WHAT IS ERROR HANDLING OPTIONS IN dtp? FOR DSO
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbd598481e1a61e10000000a422035/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm
    Cheers,
    Swapna.G

  • Duplicate records in PSA and Error in Delta DTP

    Hi Experts,
    I have enabled delta on CALDAY Feild for a Generic Data Source in Source system.
    1) Initially I have created one record in source system and I have run the Delta Infopackage.So PSA Contains one record.
    2)  I have run the Delta DTP.Now That one record has moved to DSO
    3) Again I have created one more record in source system and I have run the Delta Infopackage.Here I have contains 2 records in PSA.One record is created in step 2 and other record created from step 1.
    4) If  I try to run the Delta DTP, I am getting Error saying that Duplicate records are there.
    So would you please tell me how to rectify this Issue.
    My requirement is I need to run the load multiple times a day . (Note: Data Source is delta enabled)
    Thanks and Regards,
    K.Krishna Chaitanya.

    you can use the this feature only when loading master data, as it will ignore lines. if you would have for example a changed record with a before and after image, one of the two lines would be ignored.
    you can keep searching and asking, but if you want to load a delta more then once a day, you can't use a calendar day as a generic delta field. this will not work.
    the best thing is to have a timestamp.
    if in the datasource you have a date and time, you can create a timestamp yourself.
    you need in this case to use a function module.
    search the forum with the terms 'generic delta function module' and you'll for sure find code that you can reuse
    M.

  • Deleting records from PSA

    Hi,
      Can anyone tell me how to delete the errorneous records from psa table. i have abt 24 data packets each have abt 23000 records.
    the error is the dta package 23 and 24.
    regards,
    nithesh
    Edited by: nithesh prakash on Sep 16, 2008 7:56 AM

    Hi.,
    Another thing........why your data oacket failed.......is your extraction got completed...........
    If your data packets failed due to SID issue...........then you load the master data....delete the request without making it red from the target ............go to RSA1 >> click on PSA >> find the request and reconstruct it.........
    Otherwise if you extraction is completed............do manual update.......ie right click on data packet >> do manual update.........before that make the settings background.........otherwise in foreground it will take long time..................
    Hope this helps you...........
    Regards,
    Debjani.......

  • Checking data record in PSA

    Hi all,
    How can i check data record in PSA. I know how to do it in 3.5 but not in 7.0, that little colorful chart button is now where to be found. Any help would be greatly appreciated
    Thanks

    Hi
    RSA1 -> Datasource -> Right click on the datasource and click on manage. You should be able to see PSA data.
    Alternatively, you can see it though InfoPackage also.
    Regards,
    Praveen

  • Is there a way to notify/alert users about records from PSA

    Hi All,
    During transaction data load in BW 3.5 I am using the option" No update of transaction data if Master data does not exist" in the Infopackage.
    If any records don't meet this criteria they will show in different Request in PSA.
    My question: Is there a way to notify/alert users about these records from PSA?.
    Through process chain we can't send any alerts in this case as loads will not fail.
    Please help.
    Thank you.
    Sree

    Brian, Accepeted. We can not create Infoset on PSA.
    To create report on PSA, follow this.
    https://websmp104.sap-ag.de/~sapidb/011000358700008145112002
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/968dab90-0201-0010-c093-9d2a326969f1
    /message/5239445#5239445 [original link is broken]
    Thanks...
    Shambhu

Maybe you are looking for

  • In relation to Wireless Speakers, what does 'Connected Music Server' mean?

    Hello All, Need some advise. I am looking at purchasing a Wireless speaker. I currently have a MacBook Pro 10.8 which has my music stored in iTunes. My phone is an Android 4.2.2 device. Therefore, I need to buy a wireless speaker that supports AirPla

  • Is there a way to selectively put on and off your data-connection(3G)?

    Hi there! I'm currently working on an app that uses GPS to track a person's location, this location is than in turn send to an online database. Obviously sending that location to the database requires an internet connection, I could use WIFI for that

  • Branch office router recommendation

    Hi, my company is opening a small sales office of about 10 users. They have a dsl connection there, and I would like to put a cisco router at the location so that I can get utilization stats, response time information, etc via snmp. Can somebody make

  • Exception FYI notification in AME for PO requisition

    Hi Consultants, We have additional requirement to existing AME setup for Requisition approval process. We have 2 rules for Requisition approval process. Requirement: We need to stop the approval process and send FYI noitification to Preparer if reque

  • ORA-10827: database must be opened with MIGRATE option

    Hi, We are trying to migrate an Oracle 8.1.7 database to an Oracle 9i(9.2) database. I moved all the database files to the appr folder and I created a new instance using: oradim -new -sid PROD -intpwd Oracle -startmode a -pfile C:\oracle\OraDb\Neurop