No. Of reports in page should limit based on selection in dash Prompt???

Hi Everyone,
I have a requirement where i need to create reports based on Survey questions and there are 6 tables and this Survey Questions are repeated in all this 6 tables and assume overall I created 70 reports based on this survey questions. And the Requirement is i need to embed all this 70 reports into single dash page, and in prompt i have to create 6 radio buttons each button will be each table name, how can I achieve this????
Next Question is when we select one radio button the no. of reports should limit on the page and should display reports only related to that table????
Please anyone help me on this and reply me with your valable solution.
Thanks & Regards,
Tinku.

Hi,
The links are about creating a dashboard prompt to list down specific report names and while selecting the report names the user wanted to show those corresponding reports within the dashboard.
But my requirement is to limit the reports based on selection of table name. there are 6 tables and assume 10 reports for each table and i want to display on ly 10 reports when the user select table name( Radio button).
Is this requirement is achievable?? or should i have to create in different pages for each table.?
This is in OBIEE 11G
Regards,
Tinku

Similar Messages

Changing the report displayed on the basis of value selected frm the prompt

Hi,
I have requirement in which there is dashboard prompt which has three columns namely year, month and report name.
The user will select the report name from the prompt, once done the report that has been selected should show up
on the dashboard page and he should be able to select data on the basis of month and year from it.
Also, if the user wants to go to the other report he should be able to select it from the prompt and view it.
Pls shed some light on how to progress about it. As of now think if something like this is possible then it would definitley
need two prompts one for report name and the other for month and year.
Thx :)

Hi Kishore,
When i click on the link given by you it takes me to a page where a link is given with text as under
Oracle BI 10.1.3.3/2 - Selecting Reports from Dashboard Prompts and Guided Navigation Sections
And when i click on this nothing opens up.
Thx
Edited by: Phantasm on Jun 22, 2010 3:05 AM

Urgent: Oracle Reports : Blank Page Should print after each Group of record

Hi all,
I have a different kind of requirement, in my report I have 1 block and I want to generate a blank page after every group of records. This is because the printer is printing both side of the paper and we are giving multiple group at same time.
Cannot touch the printer setup since it is a common one. Anybody can help me in this for a fast and simple way ? "Maximum records per page" property for the repeating frame give the next group to a fresh page but there will not be a blank page in between.
Please help ..
Thanks,
Ani.

Thank you for your attention.
Empty frame with page break is not helping me since it will not hide the rest of the items which are outside the repeating frame. Like Report caption, Group Name, Page footer etc...
If I am using the empty frame, is there any way to hide all other items ?
Thanks,
Anish

Report should executed based on the radio buttons on the selection screen

Hi everyone,
Greets....................
My scenario is I have 2 selection screen blocks on same screen..
One selection screen block contains input parameters as follows
Company Code - S_BUKRS
Business Area - S_GSBER
Customer Code - S_KUNNR
Fiscal Area -   S_GJAHR
GL Account - S_HKONT
Posting Date -S_ZFBDT
Ledger Type -P_RLDNR
Open Item Key Date - P_ZFBDT
Another selection screen block contains 2 radio buttons with the option as follows
Collection Plan
*Credit days summary.
If i click Collection plan the report output should come based on the input parameters in first selection-screen block.
If i click Credit days summary the report output should come based on the input parameters in first selection-screen block.
Pls send me the sample code for this.
Thanks in Advance
Regards
Raj kumar

See the below folling example : it will have radio buttons and depends on radio button it will show output.
REPORT ZPPR_BOM_INFOL_REPORT no standard page heading
                 line-size 160
                 line-count 60.
======================================================================
Program Name : ZPPR_BOM_INFOL_REPORT
Description : This Program would be used for BOM List for a material*
               and the component's where used list                   *
Author       : Seshu                                                 *
Date         : 07/24/2006                                            *
MODIFICATION HISTORY                                                 *
DATE    | AUTHOR   | CHANGE #   | DESCRIPTION OF MODIFICATION        *
|----
|----
|----
*12/04/06 | Seshu    | DEVK921821 | Removed new page for each material *
======================================================================
Table definition                                                    *
TABLES: mast,
        stko,
        stpo,
        T418,
        makt.
TYPE - POOLS
TYPE-POOLS: slis.
Constants
constants : c_tcode(4) type c value 'CS03',
            gc_formname_top_of_page TYPE slis_formname
            VALUE 'TOP_OF_PAGE'.
Variables
data : v_maktx like makt-maktx,
       wa_stko like stko.
DATA:
Objekttyp 'Material'
   otyp_mat(1) TYPE c VALUE '1',
   ootyp_mat(1) TYPE c VALUE 'M',
Objekttyp 'kein Objekt'
   otyp_noo(1) TYPE c VALUE '2',
Objekttyp 'Dokument'
   otyp_doc(1) TYPE c VALUE '3',
Objekttyp 'Klasse'
   otyp_kla(1) TYPE c VALUE '4',
Objekttyp 'Intramaterial'
   otyp_ntm(1) TYPE c VALUE '5'.
maximal anzeigbare Menge
data:   max_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999',
        ueberl_kz(1) TYPE c VALUE '*',
        min_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999-',
        b_flag(1) TYPE c VALUE 'X',
        ecfld(250) TYPE c,
        v_flag type c.
ALV Variables
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
      gs_layout   TYPE slis_layout_alv,
      gs_keyinfo TYPE slis_keyinfo_alv,
      gt_sp_group TYPE slis_t_sp_group_alv,
      gt_events   TYPE slis_t_event.
DATA: g_repid LIKE sy-repid.
DATA: gt_list_top_of_page TYPE slis_t_listheader,
            g_tabname_header TYPE slis_tabname,
            g_tabname_item   TYPE slis_tabname,
            g_save(1) TYPE c,
            gx_variant LIKE disvariant,
            g_variant LIKE disvariant,
            g_default(1) TYPE c,
            g_exit(1) TYPE c.
Includes                                                             *
INCLUDE .
Internal Table Declaration                                           *
DATA: t_mast LIKE STANDARD TABLE OF mast WITH HEADER LINE.
*DATA: t_makt LIKE STANDARD TABLE OF makt WITH HEADER LINE.
BOM Function module Related
DATA: t_matcat LIKE cscmat OCCURS 0 WITH HEADER LINE.
Internal Table for Level by Level Function module
DATA: t_stb LIKE stpox OCCURS 0 WITH HEADER LINE.
Get the Relevant data from FM
DATA: BEGIN OF hd_tab OCCURS 0,
         stufe LIKE stpox-stufe,
         vwegx LIKE stpox-vwegx,
      END OF hd_tab.
Final Output
DATA: BEGIN OF alv_stb OCCURS 0.
        INCLUDE STRUCTURE stpox_alv.
DATA:   info(3)   TYPE c,
      END OF alv_stb.
DATA: BEGIN OF stb_orig.
        INCLUDE STRUCTURE stpox.
DATA: END OF stb_orig.
DATA: BEGIN OF stb_add.
        INCLUDE STRUCTURE stpol_add.
DATA: END OF stb_add.
Internal Table for STPO
*-- BOM Line item
TYPES: BEGIN OF ty_stpo,
       stlty TYPE stpo-stlty,
       stlnr TYPE stpo-stlnr,
       stlkn TYPE stpo-stlkn,
       stpoz TYPE stpo-stpoz,
       idnrk TYPE stpo-idnrk,
       meins TYPE stpo-meins,
       menge TYPE stpo-menge, "Component Qty
       END OF ty_stpo.
DATA: t_stpo TYPE STANDARD TABLE OF ty_stpo WITH HEADER LINE.
*-- BOM Header
TYPES: BEGIN OF ty_stko,
       stlty TYPE stko-stlty,
       stlnr TYPE stko-stlnr,
       stlal TYPE stko-stlal,
       stkoz TYPE stko-stkoz,
       bmein TYPE stko-bmein,
       bmeng TYPE stko-bmeng,
       END OF ty_stko.
DATA: t_stko TYPE STANDARD TABLE OF ty_stko WITH HEADER LINE .
data : t_makt like makt occurs 0 with header line.
DATA: BEGIN OF cl_clstab OCCURS 0,                          "YHG079407
         class LIKE klah-class,                             "YHG079407
         klart LIKE klah-klart,                             "YHG079407
         chked LIKE csdata-xfeld,                           "YHG079407
         noobj LIKE csdata-xfeld,                           "YHG079407
         dsply LIKE csdata-xfeld,                           "YHG079407
      END OF cl_clstab.
*-- Header table
TYPES: BEGIN OF ty_main_material,
       matnr TYPE mast-matnr, "Material
       werks TYPE mast-werks, "Plant
       maktx TYPE makt-maktx, "Description
       stlal TYPE mast-stlal, "Alternative BOM
       stlnr TYPE stko-stlnr, "BOM Number
       bmein TYPE stko-bmein, "UOM
       bmeng TYPE stko-bmeng, "Base Qty
       expand(1) TYPE c,      "Expanding Field
       END OF ty_main_material.
DATA: t_main_material TYPE STANDARD TABLE OF ty_main_material WITH
      HEADER LINE.
*-- Item (Component) Table
TYPES: BEGIN OF ty_item_material,
       matnr TYPE mast-matnr, "Material
       werks TYPE mast-werks, "Plant
       idnrk TYPE stpo-idnrk, "Component (Material)
       maktx TYPE makt-maktx, "Description
       stlal TYPE mast-stlal, "Alternative BOM
       stlnr TYPE stpo-stlnr, "BOM Number
       meins TYPE stpo-meins, "UOM
       menge TYPE stpo-menge, "Base Qty
       END OF ty_item_material.
DATA: t_item_material TYPE STANDARD TABLE OF ty_item_material WITH
      HEADER LINE.
Selection Screen                                                     *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_werks LIKE marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS s_stlal FOR mast-stlal .
SELECT-OPTIONS s_stlan FOR mast-stlan DEFAULT '1'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bomlst RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECT-OPTIONS s_matnr FOR mast-matnr.
SELECTION-SCREEN SKIP.
PARAMETERS: p_compon RADIOBUTTON GROUP g1.
SELECT-OPTIONS: s_idnrk FOR stpo-idnrk.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
selection-screen begin of block b03 with frame title text-b03.
selection-screen begin of line.
selection-screen comment 1(40) text-005.
parameters: p_all radiobutton group r1 default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(40) text-006.
parameters: p_one radiobutton group r1 .
selection-screen end of line.
selection-screen end of block b03.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
At slection screen events                                            *
*-- Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Intitialisation
INITIALIZATION.
g_repid = sy-repid.
g_tabname_header = 'T_MAIN_MATERIAL'.
g_tabname_item   = 'T_ITEM_MATERIAL'.
*-- define keyinformation
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'MATNR'.
gs_keyinfo-item01   = 'MATNR'.
PERFORM e03_eventtab_build USING gt_events[].
PERFORM e04_comment_build USING gt_list_top_of_page[].
PERFORM e07_sp_group_build USING gt_sp_group[].
PERFORM e08_layout_build   USING gs_layout.
Set Options: save variants userspecific or general
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            i_save     = g_save
       CHANGING
            cs_variant = gx_variant
       EXCEPTIONS
            not_found = 2.
IF sy-subrc = 0.
    p_vari = gx_variant-variant.
ENDIF.
S T A R T - O F - S E L E C T I O N *******************
start-of-selection.
if p_all = 'X'.
Get the data from MAST and MAKT Table
    if p_bomlst = 'X'.
Get the data Based On Material #
      perform get_data.
    else.
Get the data Based On Component
      perform get_data_component.
    endif.
else.
Get the Single Level Report
*-- Moved the fiedl catalog here inorder to change the layout based on
*-- Selection
    PERFORM e01_fieldcat_init USING gt_fieldcat[].
    PERFORM select_data.
endif.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if p_one = 'X'.
    perform alv.
endif.
User Command
at line-selection.
Interactive to CS03 Transaction
case sy-ucomm.
    when 'PICK' or 'F2'.
      if not alv_stb-idnrk is initial .
        if not alv_stb-werks is initial.
          if not alv_stb-objty is initial.
            SET PARAMETER ID 'MAT' FIELD alv_stb-idnrk.
            SET PARAMETER ID 'WRK' FIELD alv_stb-werks.
            SET PARAMETER ID 'CSV' FIELD alv_stb-OBJTY.
            call transaction c_tcode and skip first screen.
          endif.
        endif.
      endif.
      clear alv_stb.
endcase.
*&      Form get_data
      Get data from MAST and MAKT Table
FORM get_data.
data : wa_lines type sy-index.
REFRESH : T_MAST,
            t_STB,
            t_MATCAT,
            alv_STB.
CLEAR : T_MAST,
            t_STB,
            t_MATCAT,
            alv_STB.
Get the data from MAST Table
Get all the information from MAST - BOM Table
SELECT * FROM mast INTO TABLE t_mast WHERE matnr IN s_matnr AND
                                             werks = p_werks AND
                                             stlan IN s_stlan AND
                                             stlal IN s_stlal.
describe table t_mast lines wa_lines.
if wa_lines is initial.
    Write:/2 'List contains no data'.
    stop.
endif.
loop at t_mast.
    clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
    if sy-tabix ne 1.
      skip 1.
    endif.
End of Change Seshu
Get the material Description
    select single maktx from makt into v_maktx
                             where matnr = t_mast-matnr
                             and   spras = 'E'.
Get the material details from STKO Table
    select single * from stko into wa_stko
                    where STLTY = 'M'
                    and   STLNR = t_mast-stlnr
                    and   STLAL = t_mast-stlal.
Main Header for Each Material
    format color 5 on.
    write:/2 'Material',20 'Material Description',65 'Alternative BOM',
         90 'Base Qty', 115 'Base Unit'.
    format color 5 off.
    format color 1 on.
    write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
           115 wa_stko-BMEIN.
    format color 1 off.
Use the Function Module and get the format level by level
    perform get_level_level.
endloop.
ENDFORM.                    " get_data
Top of page                                                  *
top-of-page.
perform report_header .
*&      Form report_header
      text
--> p1        text
<-- p2        text
FORM report_header.
new-page line-size 160 .
format color col_heading intensified on.
write:/ sy-uline(160) .
*--- Write Company Name.
perform calc_col_and_write using    text-h00
                                      sy-linsz.
*--- Write Report Title.
perform calc_col_and_write using    sy-title
                                      sy-linsz.
*--- Write User Id, Date / Time, Program Id, Page etc.
perform write_other_hdr_details.
write:/ sy-uline(160) .
ENDFORM.                    " report_header
*&      Form calc_col_and_write
      text
     -->P_TEXT_H00 text
     -->P_SY_LINSZ text
FORM calc_col_and_write USING    P_TEXT
                                 P_LINSZ.
data: col1 type i,
         col2 type i,
          len type i,
          str type i.
str = strlen( p_text ).
col1 = ( p_linsz / 2 ) - ( str / 2 ) .
len = p_linsz - col1 - 2.
write: at /1 '|'.
write: at col1 p_text,
         at sy-colno(len) space.
write at 160 '|'.
ENDFORM.                    " calc_col_and_write
*&      Form write_other_hdr_details
      text
--> p1        text
<-- p2        text
FORM write_other_hdr_details.
data: col1 type i,
          col2 type i,
          len type i.
col1 = 3.
write:/1 '|'.
write: at col1 'UserId : ',
                  sy-uname.
len = sy-linsz - 1.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Date: ',
                 sy-datum mm/dd/yyyy.
write: at sy-linsz '|'.
write:/1 '|'.
write: at col1 'ReportId: ',
                  sy-repid.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Page: ',
                  sy-pagno.
write: at sy-linsz '|'.
ENDFORM.                    " write_other_hdr_details
*&      Form get_data_component
      Get the data based on Component level
FORM get_data_component.
data wa_lines type i.
*-- Get the BOM item details
SELECT stlty stlnr stlkn stpoz idnrk meins menge
          FROM stpo
          INTO TABLE t_stpo
WHERE   idnrk IN s_idnrk.
IF sy-subrc = 0.
    CLEAR wa_lines.
    DESCRIBE TABLE t_stpo LINES wa_lines.
    IF wa_lines > 0.
      SELECT stlty stlnr stlal stkoz bmein bmeng
              FROM stko
              INTO TABLE t_stko
              FOR ALL ENTRIES IN t_stpo
      WHERE stlnr = t_stpo-stlnr.
      CLEAR wa_lines.
      DELETE ADJACENT DUPLICATES FROM t_stko COMPARING ALL FIELDS.
      DESCRIBE TABLE t_stko LINES wa_lines.
      IF wa_lines > 0.
*-- Get the BOM item details
        SELECT * FROM mast INTO TABLE t_mast FOR ALL ENTRIES IN t_stko
                                            WHERE werks = p_werks AND
                                              stlnr = t_stko-stlnr
                                              and stlal in s_stlal.
      ENDIF.
    ENDIF.
else.
    Write:/2 'List contains no data'.
    stop.
endif.
loop at t_mast.
    clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
    if sy-tabix ne 1.
      skip 1.
    endif.
End of change    Seshu
Get the material Description
    select single maktx from makt into v_maktx
                             where matnr = t_mast-matnr
                             and   spras = 'E'.
Get the material details from STKO Table
    select single * from stko into wa_stko
                    where STLTY = 'M'
                    and   STLNR = t_mast-stlnr
                    and   STLAL = t_mast-stlal.
Main Header for Each Material
    format color 5 on.
    write:/2 'Material',20 'Material Description',65 'Alternative BOM',
         90 'Base Qty', 115 'Base Unit'.
    format color 5 off.
    format color 1 on.
    write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
           115 wa_stko-BMEIN.
    format color 1 off.
Use the Function Module and get the format level by level
    perform get_level_level.
    clear : t_mast.
endloop.
ENDFORM.                    " get_data_component
*&      Form obj_ident
      text
FORM obj_ident.
weder Mat noch Doc
CHECK: T_stb-objty NE otyp_mat,
         T_stb-objty NE ootyp_mat,
         T_stb-objty NE otyp_doc,
         T_stb-objty NE otyp_ntm.
?T418-WA schon ok
nein
IF T_stb-postp NE t418-postp.
    T418 einlesen
    PERFORM t418_lesen USING T_stb-postp.
ENDIF.
PERFORM cl_clstab_maint.
?MatNr-Eingabe bei diesem PosTyp moeglich
und keine Textposition
trifft zu
IF     t418-matin NE '-'
     AND t418-txpos IS INITIAL.
    aktuelles Objekt ist Material NLAG
    T_stb-objty = '1'.
    PosKurztext in ObjKurztext uebernehmen.
    T_stb-ojtxp = T_stb-potx1.
    MODIFY T_stb.
ELSE.
    IF T_stb-objty IS INITIAL.
      T_stb-objty = '2'.
      MODIFY T_stb.
    ENDIF.
ENDIF.
ENDFORM.                    " obj_ident
*&      Form t418_lesen
      text
     -->P_T_STB_POSTP text
FORM t418_lesen USING   lkl_postp LIKE stpo-postp.
T418-WA initialisieren
CLEAR:
     t418.
Key angeben
t418-postp = lkl_postp.
PosTypDefinition lesen
READ TABLE t418.
ENDFORM.                    " t418_lesen
*&      Form cl_clstab_maint
      text
FORM cl_clstab_maint.
nur fuer Klassenpositionen
CHECK t_STB-OBJTY EQ OTYP_KLA.
Teilkey der Klassenpositionentabelle
CL_CLSTAB-CLASS = t_STB-CLASS.
CL_CLSTAB-KLART = t_STB-KLART.
Klassenpositionentabelle lesen
READ TABLE CL_CLSTAB
     WITH KEY CL_CLSTAB(21)
     BINARY SEARCH.
aktuelle Klassenposition bereits in Klassenpositionentabelle
nein
IF SY-SUBRC <> 0.
    Klassenposition in Klassenpositionentabelle hinzufuegen
    INSERT CL_CLSTAB INDEX SY-TABIX.
ENDIF.
ENDFORM.                    " cl_clstab_maint
*&      Form alv_stb_prep
      Printing the data as LEVEL BY LEVEL
FORM alv_stb_prep.
CLEAR:
      alv_stb,
      stb_orig,
      stb_add.
IF t_stb-hdnfo IS INITIAL.
    stb_orig = t_stb.
    IF t_stb-mngko >= max_num.
      stb_add-ovfls = ueberl_kz.
    ELSE.
      IF t_stb-mngko <= min_num.
        stb_add-ovfls = ueberl_kz.
      ELSE.
        CLEAR: stb_add-ovfls.
      ENDIF.
    ENDIF.
    IF NOT t_stb-xtlnr IS INITIAL.
      stb_add-bomfl = b_flag.
    ENDIF.
    IF    NOT t_stb-knobj IS INITIAL
       OR NOT t_stb-class IS INITIAL
       OR NOT t_stb-kzclb IS INITIAL.
      stb_add-knofl = 'X'.
    ENDIF.
ELSE.
    CHECK t_stb-stufe > 1.
    alv_stb-info = 'C30'.
    IF t_stb-ttidx <> t_matcat-index.
      READ TABLE t_matcat INDEX t_stb-ttidx.
    ENDIF.
    stb_orig-hdnfo = t_stb-hdnfo.
    stb_orig-stufe = t_stb-stufe - 1 .
    stb_orig-ojtxp = t_stb-ojtxb.
    IF NOT t_stb-altst IS INITIAL.
      stb_orig-stlal = t_stb-stlal.
      IF stb_orig-stlal(1) EQ '0'.
        stb_orig-stlal(1) = ' '.
      ENDIF.
    ENDIF.
    stb_orig-idnrk = t_matcat-matnr.
ENDIF.
CLEAR:
    stb_add-dobjt,
    stb_add-objic.
CASE t_stb-objty.
    WHEN otyp_mat.
      WRITE: stb_orig-idnrk TO ecfld.
      stb_add-objic = '@A6@'.
    WHEN 'M'.
      WRITE: stb_orig-idnrk TO ecfld.
      stb_add-objic = '@A6@'.
    WHEN otyp_noo.
      WRITE: stb_orig-potx1 TO ecfld.
      stb_add-objic = '@0Q@'.
    WHEN otyp_doc.
      write stb_orig-doknr to ecfld.                        "note 489354
      IF ecfld CP '*# '. ENDIF.                             "note 489354
      sy-fdpos = sy-fdpos + 1.                              "note 489354
      CONCATENATE
*d      stb_orig-doknr                                      "note 489354
        stb_orig-dokar
        stb_orig-doktl
        stb_orig-dokvr
*d      INTO ecfld                                          "note 489354
        INTO ecfld+sy-fdpos                                 "note 489354
        SEPARATED BY space.
      stb_add-objic = '@AR@'.
    WHEN otyp_kla.
      CONCATENATE
        stb_orig-class
        stb_orig-klart
        INTO ecfld
        SEPARATED BY space.
      stb_add-objic = '@7C@'.
    WHEN otyp_ntm.
      WRITE: stb_orig-intrm TO ecfld.
    WHEN OTHERS.
ENDCASE.
*d CONDENSE ecfld.                                          "note 515408
stb_add-dobjt = ecfld(40).
CLEAR: ecfld.
WRITE stb_orig-stufe TO stb_add-dstuf NO-SIGN.
*d MOVE-CORRESPONDING stb_orig TO alv_stb.                 "note 331962
MOVE-CORRESPONDING stb_add TO alv_stb.
MOVE-CORRESPONDING stb_orig TO alv_stb.                   "note 331962
APPEND alv_stb.
ENDFORM.                    " alv_stb_prep
*&      Form get_level_level
      text
FORM get_level_level.
REFRESH : T_STB,
            T_MATCAT,
            ALV_STB.
CLEAR : T_STB,
          T_MATCAT,
          ALV_STB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
       EXPORTING
            capid                 = 'PP01'
            datuv                 = sy-datum
            mktls                 = 'X'
            mehrs                 = 'X'
            mtnrv                 = t_mast-matnr
            stlal                 = '01'
            stlan                 = '1'
            stpst                 = 0
            svwvo                 = 'X'
            werks                 = p_werks
            vrsvo                 = 'X'
       TABLES
            stb                   = t_stb
            matcat                = t_matcat
       EXCEPTIONS
            alt_not_found         = 1
            call_invalid          = 2
            material_not_found    = 3
            missing_authorization = 4
            no_bom_found          = 5
            no_plant_data         = 6
            no_suitable_bom_found = 7
            conversion_error      = 8
            OTHERS                = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: hd_tab.
        Entry der KlassenstatusTab. initialisieren
         cl_clstab,
        Entry 'Objekte von Klassen' initialisieren
         cl_objmemo.
REFRESH: hd_tab.
SORT t_matcat BY index ASCENDING.
Get the All levels
loop at t_stb.
    IF NOT t_stb-hdnfo IS INITIAL.
      EXIT.
    ENDIF.
Object Identification
    PERFORM obj_ident.
    READ TABLE hd_tab
        WITH KEY stufe = t_stb-stufe
                 vwegx = t_stb-vwegx
        BINARY SEARCH
        TRANSPORTING NO FIELDS.
    ?gibt es diesen Satz schon
    nein
    IF sy-subrc <> 0.
       dann in SFP-Infosatzverweistab. aufnehmen
*d       APPEND HD_TAB.                                       "HGH054648
      hd_tab-stufe = t_stb-stufe.
                                                            "HGH054648
      hd_tab-vwegx = t_stb-vwegx.
                                                            "HGH054648
      INSERT hd_tab                                         "HGH054648
        INTO hd_tab                                         "HGH054648
        INDEX sy-tabix.                                     "HGH054648
       PosNr initialisieren
      CLEAR: t_stb-posnr.
       SFP-InfosatzKz setzen
      t_stb-hdnfo = 'X'.
        stb-objty = otyp_mat.
                                                            "HGE246532
       als SFP-Infosatz in die STB aufnehmen
      append t_stb.
    ENDIF.
*del ENDIF.
    clear t_stb.
endloop.
SORT t_stb ASCENDING BY stufe
              index ASCENDING
*del        POSNR ASCENDING.                                  "HGC062735
              posnr ASCENDING                               "HGC062735
              hdnfo DESCENDING.
LOOP AT t_stb.
    T_stb-index = sy-tabix.
    MODIFY T_stb.
    PERFORM alv_stb_prep.
ENDLOOP.
Displays the Value as Level by Level
loop at ALV_stb.
    if sy-tabix = 1.
      format color 3 on.
      write:/2 'Level',12 'Item',22 'Component',
      42 'Material Description',82 'Base Qty',
      107 'Base Unit',120 'Assembly Indicator'.
      format color 3 on.
    endif.
    if alv_stb-MEINs is initial.
      v_flag = 'X'.
    endif.
    if v_flag = 'X'.
      format color 5 on.
      write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
             42 alv_stb-OJTXP.
      format color 1 off.
    else.
      if alv_stb-STUFE = '1'.
        format color 1 on.
        write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs, 120 alv_stb-bomfl .
        format color 1 off.
      elseif alv_stb-STUFE = '2'.
        format color 2 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs,120 alv_stb-bomfl.
        format color 2 off.
      elseif alv_stb-STUFE = '3'.
        format color 3 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 3 off.
      elseif alv_stb-STUFE = '4'.
        format color 4 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 4 off.
      elseif alv_stb-STUFE = '5'.
        format color 5 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 5 off.
      elseif alv_stb-STUFE = '6'.
        format color 7 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs,120 alv_stb-bomfl.
        format color 6 off.
      elseif alv_stb-STUFE = '7'.
        format color 7 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 7 off.
      else.
        format color 1 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 1 off.
      endif.
    endif.
    hide: alv_stb.
    clear : alv_stb.
    clear v_flag.
endloop.
ENDFORM.                    " get_level_level
*&      Form f4_for_variant
      text
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
         EXPORTING
              is_variant          = g_variant
              i_save              = g_save
              i_tabname_header    = g_tabname_header
              i_tabname_item      = g_tabname_item
          it_default_fieldcat =
         IMPORTING
              e_exit              = g_exit
              es_variant          = gx_variant
         EXCEPTIONS
              not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF g_exit = space.
      p_vari = gx_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_for_variant
      FORM E03_EVENTTAB_BUILD                                       *
--> E03_LT_EVENTS                                                 *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            i_list_type = 0
       IMPORTING
            et_events   = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE gc_formname_top_of_page TO ls_event-form.
    APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
      FORM E04_COMMENT_BUILD                                        *
--> E04_LT_TOP_OF_PAGE

How to create a report based on selected item from Select list?

Hi,
I have created a tables_LOV based on:
select table_name d, table_name r from user_tab_cols
where column_name like '%_type%'
Then I created a page item ListOfTables, Display as select list and pointing to tables_LOV.
I run the page, and i can select the table i want from the drop down list.
How to create a report based on the selected item? (ex: select * from selected_table)
many thanks in advance
Salah

Hi Salah,
Allright, have a look at this page: http://apex.oracle.com/pls/apex/f?p=vincentdeelen:collection_report
I think that simulates what you're trying to accomplish. I've set up the simplest method I could think of.
The report is based on an apex collection. If you are not familiar with that, you should study the documentation: APEX_COLLECTION
To recreate my example you should:
1) create an (interactive) report on your collection
SELECT *
   FROM APEX_collections
WHERE collection_name = 'MY_COLLECTION'
2) create a page_item select list for the tables you want to display (in my case this is called "P38_TABLES" )
3) create a dynamic action that triggers on change of your select list page_item. The dynamic action must be a PL/SQL procedure perfoming the following code:
declare
l_query varchar2(4000);
begin
l_query := 'select * from '||:P38_TABLES;
if apex_collection.collection_exists
        ( p_collection_name => 'MY_COLLECTION' )
then
    apex_collection.delete_collection
      ( p_collection_name => 'MY_COLLECTION' );
end if;
apex_collection.create_collection_from_query
    ( p_collection_name => 'MY_COLLECTION'
    , p_query           => l_query
end;
Make sure you add your page_item to the "Page Items to Submit" section.
4) Add an extra true action that does a refresh of the report region.
Here are two pictures describing the da:
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA1.png
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA2.png
Good luck and regards,
Vincent
http://vincentdeelen.blogspot.com

First time Report aspx page load fine close Second time it asking parameter

Hi
Please go to
http://viewer.zoho.com/docs/da5aaag (or)
http://www.megaupload.com/?d=HQCSMQNA
it has my Crystal report aspx page and aspx.cs page sourceu2026!
Note: Save image in the above url and Zoom it see clear code
My Problem:-
Its working fine, but have small problem let me know why the problem occur
When I first load the page it show data fine in crystal report viewer and if I select from dropdwonlist it showing data based on dropdownlist value working fine.. when I close the page and come back agaion it asking paramter why its asking parameter in second time when I come to same page in first time its working fine.. second time it asking parameter.. let me know where im wrongu2026
Edited by: gopihere on Oct 30, 2010 10:51 AM
Edited by: gopihere on Oct 30, 2010 1:03 PM

You are setting the CrystalReportViewer1.ReportSource in multiple sections of code on this page. I'm not quite sure what you are attempting to accomplish here? In my opinion, your ConfigureCrystalReports() should accept a report filename, or something similar. Then use that info to load the report and throw it into Session. Then the last line of ConfigureCrystalReports can set the ReportSource.
If you can tell us what you are trying to do we might be able to give you some advice. But at this point I'd just say start over on this page.

In R12, can payroll user enter expense report for employees via web-based?

Hi,
In R12, can payroll user enter expense report for employees via web-based screen? Previously in 11i, it can be done via the Expense Report forms.
Appreciate advise on this.
Thanks in advance.
Regards,
Shiau Chin

Hi Anne,
Please see page 42 of the [url http://download.oracle.com/docs/cd/B34956_01/current/acrobat/120oieig.pdf]iExpenses Implementation and Admin Guide for R12 . If you are unable to enter the ID as per the guide, I would suggest raising an Service Request with Oracle Support.
Cheers, Pete

Credit Limit based on Open Items only.

Dear Friends,
Is it possible to set credit limit based on Open Items only ( Document Type RV)
If the credit limit is crossed for accounting documents not yet cleared, then system should allow creating sales order, but block any deliveries further.
Just to add this, we are using Oldest Open Item, to make sure system blocks deliveries if even one Billing document is overdue for payment.
<< Moderator message - Please do not promise points >>
<< Moderator message - Everyone's problem is important. Please do not ask for help quickly. >>
Regards
Trupti Deulkar
Edited by: Rob Burbank on Dec 16, 2010 4:02 PM

Hi,
AT FD32,
For respective customers Credit Limit should be made 99999999....(i.e maximum)
Goto OVA8. Select the respective Credit Control area, Risk category & Customer Group.
tick-> OpenItems
Max.Open items 100% and Nodays Open here you can maintain the grace days (after the payment term limit expires) is allowed to do the transaction for respective customer.
if grace days are '0', then as soon as payment term limit is expires system will block the transactions selected.
Thank You,
RB.
Edited by: RB@007 on Dec 16, 2010 3:12 PM

A/R report u0096 Customer open items based on due date

Hi all,
Can anyone tell me if there is a standard report on AR side that gives me invoices due between certain dates, meaning I should be able to select due dates between 11/15/2006 and 11/30/2006 in the selection and the report should get me the customers with invoices that are due between the above dates for a company code.
Thanks in advance
Kumar

Hi Kumar,
there is no standard report which give you selection citeria to select range of due date. Since due date is calculated based on function module where it calculate Bline date+ terms of payment days.
other std reports are:
S_ALR_87012175 Open Items - Customer Due Date Forecast
S_ALR_87012178 Customer Open Item Analysis by Balance of Overdue Items
S_ALR_87012168 Due Date Analysis for Open Items
Hope this helps.
Please assign points as way to say thanks

Discoverer Viewer Report with Page Items Slow Performance

I created a report in Discoverer User that has page items and parameters and runs fine (under 3 minutes) in Discoverer User, but when I try and run it in Discoverer Viewer it takes a long time. It took over 70 minutes before manually terminating it. I made a copy of the report and removed the page items and tried to run it again in Discoverer Viewer and now the report runs in under 3 minutes. Any idea why a report with page items would run in Discoverer user fine, but not discoverer viewer?
I am using Oracle Business Intelligence Plus 10g (10.1.2.55.26)

As long as you can access the middle-tier server where Discoverer Viewer is running, you should be able to run and view Discoverer worksheets.
While it is difficult to even start guessing what the problem might be, if the machine you installed Discoverer on has DHCP addressing, you will run into problems.
Thanks
Abhinav
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN : http://www.oracle.com/technology/products/bi/
Discoverer : http://www.oracle.com/technology/products/discoverer/
BI Software : http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples : http://www.oracle.com/technology/products/bi/samples/
Blog : http://oraclebi.blogspot.com/

Is there a way to hide some reports based on the selected values in prompt.

Hi Experts,
Is there a way to hide some reports based on the selected values in prompt.
For ex. if a year is selected in the prompt then the report should display year wise report.
If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
Regards
Ashish

Hi,
Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
Use four sections.
Section1-Place report that should come when only year.
section2-Place report that should come for year and halfyear.
Section3-Place report that should come for year,halfyear and qtr.
Section4-Place report that should come for year,halfyear,qtr and month.
Apply guided navigation for each section selecting guided navigation-
For section1-
properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/

Update report based on selected LOV value

I've searched the forum but could not find the answer how to implement the following:
I have a form with a popup LOV, element P203_LOCATION_ID, which is populated from a query. When the user picks a value from it, a report in the same page should be refreshed. The report has query "select * from distances where d < 1 AND l = :P203_LOCATION_ID " .
I created a dynamic action which would refresh the report on change of P203_LOCATION_ID , but the report does not change.
After looking here, I made a hidden variable P203_SEL_LOCATION which is populated by dynamic action on change, with javascript $v('P203_LOCATION_ID') , and then a second rule in the dynamic action should refresh the report. The query in the report is changed to use :P203_SEL_LOCATION as a parameter.
Although, when made display-only, P203_SEL_LOCATION does change (and console.log shows the selected ID), the report does not see that change and remains empty. I tried both IR and classic report, same result.
Any help would be appreciated, how to make change in Items visible to the report?

Hi Mila,
I assume that you have checked that the report refresh process is happening and that by "empty" you meant that the report was not fetching any records whereas it should have for the value you see in the page.
It could be because the changed values is not is not yet set in the session for the report to see(report fetches the bind value of the item P203_SEL_LOCATION from the session).
You will need to add the item's value to the session before firing the report refresh.
One way to do that would be to add a PLSQL process as true action with the sequence order lesser than the refresh.
In the items to submit_ , give P203_SEL_LOCATION
And the process needn't do anything(what we wanted was the P203_SEL_LOCATION be set, which would be done before executing this PLSQL)
BEGIN
NULL;
END;Hope that solves your problem

Form on a Table with Report, 2 Pages

I have a view and i am using this to create a page as follows for insert/update/delete .
(1) create application from scratch
(2) on page 1 using wizard choice "Form on a Table with Report, 2 Pages"
(3) Follows the screens and create the 2 page where first page is a report and when i click on edit(in my case) it goes to next page for insert/update/delete.Everything like insert/update/delete works fine .
Now this view has say three columns
(1) element_type_id
(2) element_name
(3) yesnoflag
changing element_name and yesnoflag column is ok but then i need to have element_type_id corresponding to the element_name from some other table.
Question1
How should i get the element_type_id corresponding to the element_name .so when i create a new record it goes to page 2 and i can provide LOV for element_name and enter into yesnoflag, how can i get the element_type_id populated corresponding to the element_name entered.
Question2
Also in my application i have name element_type_id as primary key .I am not sure if thats a good idea or should i make element_name as primary key ?
please help.
Thanks,
Sachin

hey rui--
by "adjust your html", i simply meant that you should look at your page, think about the html that's being used, and adjust it as necessary to make your data wrap as desired. now that i'm pretty sure i understand your issue, i can tell you the adjustment. you're saying that your form shows your long column "correctly" with data broken up onto separate lines by carriage returns or linefeeds. when you display that same data in your report, those carriage returns ( chr(13) ) and/or linefeeds ( chr(10) ) aren't observed. that's because they don't mean much in regular html. two ways to approach this would be:
a) replace your carriage returns with explicit <br> tags to get the breaks that you want...
select test_id, replace(test_description,chr(13)) test_desc from my_table;
b) wrap your column with <pre> tags to preserve all the original formatting of your data...
select test_id, '<pre>'||test_description||'</pre>' test_desc from my_table;
...and you could, of course, do option B in your report row template if you'd like.
hope this helps,
raj

Report display in dashboard based on selected value

Hi Experts,
I have an requirement.
when I select quaterly in prompt the quaterly report should display.
when Yearly selected then yearly report should display in dashboard
we are using OBIEE 11.1.1.7
Any idea pls.

Hi,
I feel you can achieve this by using OBIEE11g Conditions. You can show the quaterly or yearly report based on the Rowcount fetched on the conditional analyis created. Please see if this helps

Update the web links on the Crystal Reports start page?

Many of the web links on the Crystal Reports start page are now useless and direct to the general "Welcome to the SAP Support World!" page.
When will / how can these be updated?

You should be able to do searches here:
https://www.sdn.sap.com/irj/sdn/businessobjects-articles
https://www.sdn.sap.com/irj/sdn/businessobjects-downloads
Ludek

No. Of reports in page should limit based on selection in dash Prompt???

Similar Messages

Maybe you are looking for