No Office 2010 64 bit support and printer driver issues

I have been using Adobe Acrobat Pro 8 for about 2.5 years. Whenever I upgrade my laptop I usually upgrade most of the software I use including Adobe Acrobat Pro. This time I didn't see a need so I installed Acrobat Pro 8 again.
When I did, it no longer had integration with my upgraded Microsoft Office 2010. It also had an issue that every time I printed something to the Adobe PDF printer driver, the dialog box to select a filename would show up behind the application I was using (such as Firefox). Then when the PDF was generated and opened for preview, it also ended up behind the application I was printing from.
I chalked these issues up to using a version of Acrobat that came out before Windows 7 and before Office 2010. So I went out and reluctantly purchased the upgrade. All the marketing material said it was compatible with both.
Well, absolutely nothing has changed. It still doesn't work with Office 2010 because I'm using Office 2010 64bit, and still opens the dialogs behind the application I'm printing from. Almost every laptop comes with Windows 7 64bit and using Office 2010 64bit should not be something I can't do just to get support from an Adobe product.
If there is any workaround for the Adobe dialogs coming up behind the application I'm trying to print from, I'd love to hear it. I would have happily asked Adobe for a solution but I guess they don't offer any type of email support, chat support, or phone support unless you pay through the nose. Or maybe I just didn't see any way after clicking through all the screens under Help on their website.

For 7.0 and 7.5 it will not be supported. It will be supported for BPC 10.
Regards
Sorin Radulescu

Similar Messages

  • Apple Tech Support and Printer/HDD issues after 7.1

    Has anyone spoken to Apple tech support about the hard drive and printer problems after updating the firmware to 7.1? I plan on calling them later this evening and will post after that

    Has anyone spoken to Apple tech support about the
    hard drive and printer problems after updating the
    firmware to 7.1? I plan on calling them later this
    evening and will post after that
    I plan on calling them tonight, as I am sure they want me to be at the same location where the equipment is located. Someone told me that tech support personnel are available in "large" numbers only before 9 PM Eastern, with an average wait of 2 minutes.

  • Does Windows 7 and Office 2010 combination supports Smartview 9.3.3?

    Does Windows 7 and Office 2010 combination supports Smartview 9.3.3.
    During the installations of smartview in one of our client machine which has Win 7 and Office 2010, installation failed.
    any one has idea? pls response me asap. you are highly appreciated.
    Edited by: 837268 on Feb 16, 2011 5:44 AM

    As per http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hsys9_install_start_here_933.pdf, Office 2010 32 bit and Win 7 are supported for 9.3.3.
    What is the error?
    HTH-
    Jasmine.

  • App-V 5.0 // Visio - Project with Integration + local Office 2010 Deployment Kit and COM settings

    Hi, I did read all the Microsoft and non-microsoft documentation first. However, I didn't find an answer to these 3 questions: 
    Situation:
    * Locally installed Office 2010.
    * Visio and Projects 2010 sequenced with App-V 5.0 SP3 sequencer with integration scenario (http://support.microsoft.com/kb/2830069)
    * User-target of Visio and Project (I now according to documentation this should be published globally. Since not every user has a license this is no option. So far my tests do not show any problems with user-targeted visio/project)
    * Visio has "allow COM objects to interact with the local system" and "OutOfProcessEnabled" enabled
    1) When targeting both visio and project to the user with integration the licensing component only works for the first started application. Therefore I also install the licensing kit locally which make both the visio and project licensing work just fine.
    Anyone sees a problem with having the license kit installed locally and stream the applications with integration on top? With my tests all seems to work well. The advantage of this is that I do not have to have separate packages for integration and non-integration
    scenario's.
    2) To make drag-and-drop from visio drawings in word work I enabled the COM interaction and I need also to set OutOfProcessEnabled="true". Does anyone now how to set OutOfProcessEnabled to true inside the .appv (it is possible with application
    virtualization explorer) and not only manually afterwards in the xml's?
    3) Should these COM settings be enabled for project as well? It seems that pasting in word from project has not the same interaction, it just pastes a table.

    1.  We did similar, installed that MSI for the licensing component locally, and streamed Project and Visio 2010, and so far so good.
    2. There is no way to set those COM options inside the .appv.  You can set integrated vs isolated, but no IP or OoP COM, you have to use the deployment XML.
    3.  This gets tougher to answer, but it goes to how much isolation do you want.  Some of the articles are great just go over my head slightly, but have to deal with how the filter driver processes certain kinds of COM, IP or OoP.  With Isolated
    (as opposed to integrated) the COM systems (local and package) are totally isolated except for global exceptions.
    With integrated, you can further 'integrate' the COM subsystems by enabling those options.  Correct me if I'm mistaken though.
    So do you need to?  If everything works for you I'd say no, but you might find something else doesn't work without those settings.
    Also very important, you cannot join a CG without those subsystems being equal.  So if Project and Visio ever need to be in a CG together and the COM settings aren't identical, you will get an error at the client.
    I really like this article but not going to lie it goes over my head a bit (a bit or a lot depending on my coffee intake)
    http://blogs.technet.com/b/gladiatormsft/archive/2015/01/14/app-v-5-further-into-com-and-dynamic-virtualization.aspx

  • Is office 2010 officially supported on windows server 2012 R2

    hello,
    can someone tell me if office 2010 is officially supported on windows server 2012 R2 RDS?
    This link only talks about Windows server 2012 not R2.
    Thanks in advance.
    Regards
    Anthony

    Hi Anthony,
    I successfully installed Microsoft Office Professional Plus 2010 on Windows Server 2012 R2 before in my testing environment.
    So yes, Office 2010 is supported on Windows Server 2012 R2.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • HP 6600 Scan\Print Driver Issue for Windows 7 Profession​al 64 bit

    Hello,
    For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
    The problem:
    Printing:  Currently receiving an "Error - Offline" message in my printer queue at all times.
    Scanning:  Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
    Things I have tried:
    Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
    Uninstalled Drivers from CD-ROM, re-installed, countless times
    Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
    Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
    Installed Drivers and finding the printer myself through it's own static IP address.
    Turned off firewall and attempted to print (after reboot), same errors
    Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
    Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
    Things I have not tried:
    Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
    Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
    You tell me
    Curiosities:
    I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
    Weird that it is not recognizing the model number.
    Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
    Theories:
    I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
    Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that. 
    Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

    Hi Zerosouls,
    I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
    First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
    Restart the computer after this step and try installing Hp Officejet 6600 again.
    Please let me know what happens
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Does Office 2010 Standard supports IRM ?

    I need a clarification.
    Technet says we can't use IRM with Office 2010 Standard. But I am able to open IRM mails from Standard Edition, though i am not able to compose new mails / protect new docs.
    Does technet means Office 2010 Standard supports only reading IRM protected mails/docs, but not protecting mails/docs ? If it is so, can i go ahead and purchase Office 2010 Standard instead of Pro Plus ? Is that legally right ?
    Regards.

    Hi,
    Yes. Office 2010 Standard has a limited IRM feature which you mentioned.
    If you want to replace the product, it would be better to call Microsoft for help.
    Best regards,
    Rex Zhang
    TechNet Community Support

  • Does anyone know what the cost of upgrading a mac book pro (2008) to multicore intel processor with 64 bit support and 4 to 8 GB?  I need to do some mobile editing on Adobe Premiere CC but my current laptop says it can't support it.

    cost of upgrading mac book to mutilcore intel prcessor with 64 bit support and 4 gb

    Processors can not be upgraded.  Therefore youa re looking at upgrading to a new machine.
    http://store.apple.com/us/mac

  • Office 2010 Production Support

    Did they ever release working support for the production release of Office/Outlook 2010 in either 32 bit or 64 bit for syncing? All the other 3rd party addins that we utilize where available when the product went production and prior to that. The only systems that we do not have on Office 2010 are the ones that require IPhone syncing, it is a pain to support to versions of Outlook and to keep publishing validation variance reports on these machines

    Dave Sawyer wrote:
    The answer remains the same as it was last week; Apple has not as of yet announced official support for Office 2010. When that support will come, no one here can say.
    unfortunate that they can't stay in sync with the business curve, getting pressured to get the machines within compliance within 3 weeks, looks like we are are being forced back to Windows Mobile phones.
    Message was edited by: Wingrider01

  • Client Security Solution and Office 2010's Word and Outlook

    I purchased my system June 16, 2009 with Vista downgraded to XP Pro so I was not able to purchase a upgrade disk from Lenovo to upgrade to Win 7 (deadline was June 22). This week I purchased the Windows 7,retail  64 bit Home Premium upgrade package at a local store.
    I did the upgrade (clean install) Windows 7 64 bit Home Premium on my ThinkPad T400 type 2764-CTO. Also successfully installed all Win 7, 64 bit ThinkVantage software with System Update 4.
    I manually Installed the file z909zis1032us00.exe Client Security Solution 8.3 for Windows 7 (64-bit only) Version: 8.30.0032.00 Note: When upgrading from Windows XP To use TPM with Win 7 erase TPM in the BIOS configuration utility. In the Security and Security Chip menu, locate the option to clear the security device referred to as Security Chip and clear. If not done you can install but not use the program.
    Then I had this issue with Client Security - Password Manager version 8.30.00.32.00 and Office 2010's Word & Outlook. This was before I spotted a tread with the same issue between Password Manager 3.20.0320.00 and Office 2007.
    I noticed that whenever I run Word 2010 or Outlook in conjunction with Client Security SolutionI I could not select text. I could no longer use CSS because of it...
    I called Lenovo and was told that they do not support retail version of Win 7. (Remember they refuse to sell me their version a week earlier). Because I dint know what to do, I deactivated the TPM in Client Security and it solve the problem in both Word & Outlook.
    On the following automatic System Update at the Lenovo site the system pick up something was wrong with Client Security (it did not when the TPM was activated???) and offered to download and install "Client Security Solution Office 2007 Patch 64bit". I did and following installation I re activated the TPM. The problem in Word & Outlook was no longer there.
    Then on the next system update the system offered to download and install "Patch for IE crash with Password Manager (Win7) version 1.0". I had not experience that problem but downloaded and let the system install it anyway.
    So the problem is not restricted to version 8. 3.20.0320.00 and Office 2007 as reported in the other thread. Because the patch was automatically downloaded fron the web site (Client Security Solution Office 2007 Patch 64bit)  I do not know if it is the same patch the was offered in that thread.
    I hope this will help other people having the same problem.
    Claude

    Hi All,
    May i know the version of the CSS? Is it Windows 7 CSS 8.3 ? 32 bit or 64 bit? Would love to know more in detailed for i could report to the development team.
    Thanks!
    Regards,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • MS Office 2010 upgrade Home and Student to Home and Business

    Hello,
    I have to change Office versions on a couple of computers from Home and Student to Home and Business. I intend to uninstall the current versions then install the new ones. Presumably the license keys "liberated" can be reused on other computers. Is that
    correct?
    As far as I can tell, MS provides no way to recover a key. There are several utilities on the net that claim to do that. How reliable are they?
    Thanks in advance
    Philippe

    Hi,
    For a preloaded Office version you can locate the product key on you computer.
    If you purchased a Product Key Card, please locate the key on it.
    http://office.microsoft.com/en-us/products/find-your-office-2010-product-key-HA101832538.aspx
    If you lost the product key, try this:
    http://support.microsoft.com/kb/823570?wa=wsignin1.0
    More information about licenses usage:
    Q:Can I install Office Home and Business 2010 and Office Professional 2010 on more than one PC?
    A:It depends on what you purchase—a Traditional Disc or Product Key Card. If you purchase a Traditional Disc retail license of Office Home and Business 2010 or Office Professional 2010, the retail license terms allow you to install, activate, and use Office
    Home and Business 2010 or Office Professional 2010 on your primary PC and your portable device such as your laptop. This license is for your use exclusively.
    If you purchase an Office 2010 Product Key Card, you can only activate and use the suite on one PC or device. For more information on the license you have purchased and to obtain an overview of your licensing agreement, visit the
    Microsoft Software License Terms (MSLT)
    http://office.microsoft.com/en-us/products/office-2010-frequently-asked-questions-HA101674631.aspx
    Best regards,
    Rex Zhang
    TechNet Community Support
    A new Office has arrived, try it now.
    A beautiful Start. It begins here. Windows 8 and Windows RT.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Office 2010 & 2007 - Excel and Access File Locking Out On the Network With Multiple Users

    This is also posted in the Office 2010 - IT Pro General Discussions, but was suggested to repost here, since a definitive answer was not found.
    Hi,
    An issue that's happening is that Excel and Access files are locking on the network. We're currently using Office 2007 and 2010.
    Here are some different scenarios that are happening:
    When opening the file it is locked out by “User X” which is the person that has the file locked out and no one else can open the file.
    When opening the file it is locked out by “User Y” which is NOT the actual person, but is locked out by “User X” and no one else can access the file.
    When opening the file  it is locked out by “…another user” which is generic and no one else can access the file.
    The two more common events are incident 1 and 2 with 3 happening the less common.
    This message will continue until the sessions are closed through computer management on the file server.
    The file server is running Windows Server 2003.
    This does happen on both Windows XP and Windows 7 clients.
    This does happen for users using Office 2007 and Office 2010.
    There are two sets of Office 2010 Users when it comes to patches. Everyone has the most current patches with Office 2010 SP2 while anyone that has Microsoft Project 2010 is using all the current update before Office 2010 SP2.
    All users that are using Office 2007 have all the current patches and service packs.
    Another variable is that we have users that will leave a file open on the network for 3+ days and after a while it will lock the file out.
    Also we have Shadow Copy that runs daily on the system which I'm not for sure if that impacts anything if a file is opening during that time.
    Any ideas on how to mitigate the lock out issues would be appreciated.
    Thanks,
    Binary Process
    Edit November 12, 2013: This issue can occur if and if not another person actually has the file open. If the person doesn't have the file open then there is a hung connection which needs to be disconnected by going to the Computer Management of the File
    server.

    Hi Binary,
    I know that the description of the hotfix does not relate to the issue. The purpose is to install it for upgrading SMB related file.
    A similar issue I encountered before:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b7fcc59b-52d9-4a02-863a-1a529bcb8cb1/temp-doc-etc-files-dont-close-after-a-file-closes-this-causes-locked-files?forum=winserverfiles
    It is resolved by upgrading SMB files so maybe it will help on your case.
    Another hotfix which may related:
    http://support.microsoft.com/kb/983458
    If you have any feedback on our support, please send to [email protected]

  • Going from Office 2010 to 2013 and Back to 2010 I lost My Outlook Search

    Hello--
    We are doing some beta testing and I had to install Office 2013 from 2010. I finished the testing and went back to 2010.
    Now, when I do a Windows search, my Outlook email is not included in the search results. This is a major loss to my productivity. I believe I read that Outlook email is not included in the Windows search with 2013, so that's probably why I lost it.
    Can you tell me how I can include Outlook email in my Windows searches again? I searched for solutions online and all I got were questions.
    Thanks!
    Stephen
    Stephen Davis

    Hi,
    Sorry for not having resolved this issue so far. We can try to uninstall Office 2010 first, then delete the following registry keys from the location:
    Win + R, type "regedit"(without quotes) then press Enter.
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
    carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
    http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook
    HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook
    HKEY_LOCAL_MACHINE\Software\Microsoft\Office\14.0\Outlook
    HKEY_LOCAL_MACHINE\Software\Microsoft\Office\15.0\Outlook
    HKEY_LOCAL_MACHINE\Software\Microsoft\Office\Outlook
    Once the keys are deleted restart the computer, then re-install Office 2010 to check the result.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here
    That fixed it. After I did the steps you indicated, I went back to the Indexing options and made sure the Office14 folder was included.
    Thansk
    Stephen Davis

  • Office 2010 - Copy, Cut, and Paste not working

    Firstly, I am on a corporate domain and most of our users are using Windows 7 with the Office 2010 suite, both of which contain the most current updates. My problem is that some users are unable to copy and paste from one application to another.
    For instance, User A is unable to copy or cut cells from Excel by either right-clicking and selecting the option, or by keyboard shortcuts and then pasting into another area of the same document or any other document like notepad. User
    B, cannot complete the same operation in Outlook from email to email or from email to lets say, Word.
    However, and it's a big HOWEVER, none of this happens while the browser is closed. I have seen this with all three of the major browsers, Internet Explorer, Firefox, and Chrome. So all functionality comes back with the copy and paste once the browser
    is closed, and if you reopen the browser the problem reappears as if the browser takes over the clipboard.
    If anyone has a solution or suggestion your feedback would be much appreciated.
    Regards,
    Kris

    MMA_Junkie,
    Skype has released a new version of Click to Run (http://www.skype.com/intl/en-us/get-skype/on-your-computer/click-to-call/windows/). Skype will do a silent upgrade
    to existing customers to fix the problem. The build that will fix this issue is 5.11.0.9874.
    Microsoft has also released a KB article that addresses the situation (http://support.microsoft.com/kb/2697462)
    Article ID: 2697462 - Last Review: April 18, 2012 - Revision: 4.0
    You can no longer use the Clipboard to paste text formatting in Office programs

  • Has PeopleSoft certified usage of Office 2010 with FSCM and HCM

    Has PeopleSoft certified usage of Office 2010 32-bit and 64-bit with its products FSCM and HCM in versions 8.9 and 9.1?

    Certification is done at the PeopleTools level if I'm not mistaken. Office 2010 is certified for Tools 8.49. For Tools 8.50/8.51 only Excel is mentioned and it is certified for Windows 7 (32-bit and 64-bit) and Windows Server 2008 R2 (64-bit). A lot of other combinations are still planned for certification.

Maybe you are looking for