No on screen display when i change volume from quick touch

i recently installed windows vista ultimate on my laptop. i installed all the drivers listed on the hp website. everything is working fine except that whenever i change the volume from the quick touch on the keypad there is no on screen display. the volume does get changed.

here the link
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/HP-dv6-2174tx-Onscreen-touch-volume-control...

Similar Messages

Beats audio no longer shows a display when i turn volume up and down pavilion dv7 win7

my pavilion dv7 used to show a display when i changed volume. it no longer shows up. volume works fine. i can open beats audio just fine.

Hi,
Try using Recovery Manager to reinstall HP Quick Launch Buttons - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume

i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

T440s: No on screen display of caps lock, volume, screen brightness, etc.

Hello all-
I updated the BIOS to 2.26 a while ago and ever since then there's no on-screen indication of caps lock on/off, screen brightness or volume when I change it. Since it seemed to be affected by BIOS, I updated again to 2.27 just now, but the problem persists. Any ideas? Thanks in advance for the help.
EDIT: Just fixed my own problem. I needed to update the Hotkeys Feature Integration by downloading the utility thingy from this page. Probably wasn't a BIOS thing after all.
Solved!
Go to Solution.

Hi Brightnsalty,
Welcome to Lenovo Community!
As per your query we understood that you were facing issue with On Screen Display earlier on ThinkPad T440s.
And we glad to hear that the issue has been resolved after installing Hot key feature application.
I also suggest you to update Lenovo power management application, if the OS is Windows 7, please update Lenovo Power Manager application.
Cheers!
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Vendor Maintenance screen display when posting in FB01

Hi All,
I would like to ask your idea if ever you have encountered this issue.
In FB01 I post a document using the vendor 999999 after entering the posting key and press the enter. Another screen displayed..that screen looks like the transaction FK01. It seems that you need to recreate again the vendor. But my question is why did that screen appears though that vendor is already created..What are instances that this screen will appear..
Regards,
Ekitzv

Hi,
That vendor must be One-time vendor.
The concept of one time vendor is that, there is a single transaction with that vendor, like Fly-Ins.. and which are not regular.
So, SAP has given you the facility to create a Vendor in the Account Group One time vendor, which will have one vendor Account No., in your case it is 999999, and whenever you post entry with this vendor Account No., then, at the time of posting entries, a pop up screen will come for you to enter the name, city etc..
The balance vendor master data, like pmt terms, Recon account remains same for all, but only the name & city changes..
So, instead of creating many such one time vendor code in the system, you create just one code and then on a case to case basis, you post liability in this vendor, and enter name ,city etc.. at the time of Invoice booking.
=========
When you go to FK01 to create a vendor, press F4 on Account Group, and you will see that there is a check mark for OTA(One time acount), with this tick, you can identify that whether your vendor 999999, is in the account Group OTA.
Hope it helps..
Regards,
SAPFICO

Unable to change screen quality when accessing Window machine FROM my Mac

Hi there,
I've been playing around with a copy of Apple Remote Desktop 3.1 and I'm very happy with the results when connecting to a Mac Server from my MacBook. We have quite a slow line so I use the sceen adjuster on the top-right corner of the screen to make the remote screen black & white to speed up the connection. I have another server here which is Windows server running RealVNC. When I connect to that machine and try changing the screen quality to black & white, it does nothing Can anyone change the screen quality when connect to a Windows machine from a Mac running Remote Desktop? If so, could you tell me your setup please?
Martin BG
Life as an Apple Switcher - http://aurora7795.blogspot.com

Go to System Preferences-->Display. Choose the biggest dimension there. The screen will turn blue and your display will change.

No screen displayed when booting with options key held down

When I hold the option key down to select which OS I want to boot into I am getting nothing displayed on the screen but the booting has paused waiting for my input because I can use the cursor keys and return to get the system to boot.
Anyone got any ideas as to why I cant see the choices?
Thanks
Gary

Just a quick follow up on this problem. I have just tried the Mac Mini on my TV using the HDMI port and I get the boot menu displayed when holding down the Option Key and it works fine. The issues are arising when I plug a VGA adaptor into the mini display port and use that with my monitor. The monitor is not reporting any out of range or sync signals while booting and I have tried 3 different monitors of various ages and all have the same result.
I also get no apple logo or any display while OSX is loading when I use the monitor
Gary

Problems with the display when I change the view

Hi,
I have recently downloaded th emost up to dat everion of itunes and I have a problem when I change the view. All I get is a black screen down the right hand side where the library details sit. This eventually clears but is **** annoying. It also happened when I had version V7.01 running.
Any ideas?
Thanks,
Fujitsu Siemens MS 6567V2 Windows XP

Helpful AnswerRe: Have anyone problems with the dock? when I start the imac it doesn't appears
27-jun-2011 15:58 (in response to pocoto)
If you run Parallels, this is one of the symptoms of this issue:
http://kb.parallels.com/en/111541
Regards,
Captfred
Like (0) Reply
Captfred post me this page, follow the instrutions on parallels preferences and for me it works. Try it and let us knows if it's works for u too..Regards

What does the screen display when charging?

I finally got my nano to keep charging while not updating from itunes...since this is my first charge, my screen is displaying "do not disconnect" with the lightning bolt going through a green battery in upper rt. corner of screen. Does this mean it is actually charging? When it finishes charging does the "do not disconnect" go away?

this actually means your iPod is in disk mode. you'll need to eject it before that goes away: http://docs.info.apple.com/article.html?artnum=61135

How to dynamically calculate sub-total of rows and display when member changes in Hyperion Financial Report

Requirement - I am writing a very large reports from Hyperion Performance Cost management.
Account is in Row. We are taking all level0 members in Row. In columns we are taking Entity,Cost Centers
Current Structure of the Report
41100 Entity1 Cost center1 20
41100 Entity1 Cost center2 30
41100 Entity1 Cost cenetr3 40
41200 Entity 10 Cost center1 200
41200 Entity 10 Cost center2 210
41200 Entity 10 Cost center3 200
Grand Total 1000 ( For Example)
User wants to dynamically add a sub total into the report when account (41200,41100) changes i.e. This is because , its a very large report of 100's of pages,
Future State
41100 Entity1 Cost center1 20
41100 Entity1 Cost center2 30
41100 Entity1 Cost cenetr3 40
sub total 1 --------------------------90 ( This line should be automatically inserted here)
41200 Entity 10 Cost center1 200
41200 Entity 10 Cost center2 210
41200 Entity 10 Cost center3 200
sub total (n) -------------------------610 ( This line should be automatically inserted here)
Grand Total 1000 ( For Example)

Hello,
maybe re-consider this approach and say no to the users who request this. Try to think about other solutions.
Sometimes a "no" helps them more than doing what they ask.
You might export the whole in Excel. Then they can make their subtotals at every line.
Regards,
Philip.

Excel for mac ver14.4.1 screen goes blank when i change to & from full screen view

when i'm working on an excel document, if i am in full screen and hit escape to go non full screen the document goes blank.
if i hit the full screen arrows again, i see my document momentarily and then the screen goes blank again.
i believe this issue began recently after the most recent version update. i must constantly save my documents in case i go in or
out of full screen view and my page goes blank so i don't lose my work. does anyone else have this issue and what can i do about
it? my macbook uses os x ver 10.7.5. not sure if this is an excel problem or an os x problem.
thanks to anyone who can help me figure this out.

Hi，
As your request is relate to Excel for Mac, better to post your issue to the forum below:
http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Wind Zhang
TechNet Community Support

Do i need to reinstall office when we change volume licensing to O365

Hi,
We have Office pro plus installed and licensed with open value licensing. Now we have plans to order O365 midsize plan.
Do we have to reinstall all desktop offices or could we use that office version what we have installed under volume licensing?

Which version of your Office Pro Plus? Office 2013 ProPlus or Office 2010 ProPlus?
If it is Office 2013 ProPlus, you can use the current Office 2013 with Office 365.

Why doesn't a List update it's display when you change the dataprovider Array?

Hi. I have a list and an array with more strings inside. If i
remove some of the strings from the array and add some new strings
then the list display doesn't update. How can i force the list to
update?
List1.dataProvider = Array1;
Array1.pop();
Array1.push("test");
List Update??????

Hi MaxMuld,
Because it has to be ArrayCollection, not the Array.
Documentation about Datagrid.dataProvider says that Array as
provider will be converted to ArrayCollection. And ArrayCollection
performs all the notifications if you add/delete items in it.
If you still want to use Array you should do the following:
var ar= new Array();
ar.push(x)
grid.dataProvider = ar;
grid.dataProvider = new Array();
ar.pop();
grid.dataProvider = ar;
But this is very inefficient.
Dmitri.

How do you stop F11 and F12 beeping when I change volume?

I've looked in the systems preferences but I cannot find an option to turn this beep noise off, anyone know?

You're welcome, glad to have helped & thanks for the star
Steve

Value "null" is displayed when retrieving null values from database

Hi,
I'm retrieving a record from Oracle database using a ResultSet rs and displaying the values on screen. Some of the columns do not have any data.
The statements are:
ResultSet rs
st=con.createStatement();
rs=st.executeQuery(............)
out.println("<input name='punch_line' type='text' value='"+rs.getString(7)+"'>");
The problem is that there is no value in the database column rs.getString(7). Ideally when the value is null, the field should not display anything. But in my case it is displaying the text "null".
Can anyone let me know how can I display a blank value instead of displaying the text "null"?
Thanks,
Sridhar

api >
String getString(int columnIndex)
Gets the value of the designated column in
column in the current row of this ResultSet object as
a String in the Java programming language.
so null is returned as string object..NO.
http://java.sun.com/j2se/1.5.0/docs/api/java/sql/ResultSet.html
Returns:
the column value; if the value is SQL NULL, the value returned is null
The Java literal null is returned, not the String "null". The JDBC API provides a method wasNull() to detect if the previous accessed column returned a SQL NULL.

No on screen display when i change volume from quick touch

Similar Messages

Maybe you are looking for