No one can answer this question. Please hel

I'm looking at the T5400 and P5800. Both are 5. sound systems list price of 79.99. Both are 74 Watts. I'm trying to find out a breakdown of which may give the better sound or the differences in performance between the 2. I have the following questions :
. What is the difference between channel dri'ven (T5400) and 2 channels dri'ven (P5800)
2. The 5400's have tweeters (but are channel dri'ven) while the 5800 does not (but are 2 channels dri'ven), which will be giving out the better sound?

hi, perhaps that your problem is the custom gui theme for firefox.
Uninstall it and use just the default theme

Similar Messages

  • My iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. s

    my iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. switched off my phone but on without power button . what is the problem?
    Thanks
    s.m slim

    all iphone is same like that

  • Where do you go when no one can answer your question?

    Hi
    I have posted over 10 times the same question in various ways yet no one can answer in a way that works
    "Have asked about an error I keep getting when trying to sync. ("* -[NSCFDictionary setObject:forKey:]: attempt to insert nil value" )No replies after asking 8 times so I surrender. Is there any way to erase all the entries (I have over 6000) and re upload? Right now .Mac only can delete up to 50 or 1 page at a time. Is there another way to delete the address book?
    Thanks"
    The advanced tab reset doesn't update the .mac server version so the only way seems to be delete 50 at a time out of 6500 entries. How can I do an old school overwrite without confusing the computers as to which is which machine?
    Any place I can go from here?

    I looked back at the message Austin cited, and if I understand what you've posted above, you're not correcting the underlying issue.
    First, you have seriously corrupted Address Book records on your source computer. If you had replaced those corrupted records with what I assumed would have been the intact records from .Mac, you would likely have resolved the underlying problem. But, as I understand what you've posted above, you did the opposite: you replaced the records on .Mac with the corrupted records on your source computer. It's not clear that the .Mac record set is now corrupted, and it should not be, but—on the other hand—it might be.
    For the record, you should not have been able to successfully replace the record set on .Mac with corrupted data: it should have transferred only intact and valid data, or failed in an attempt to transfer corrupted records. The problem here is that there is not a one-to-one correlation between the Address Book schema and the .Mac schema for contact information, so it may have successfully passed the good data common to both environments, and not attempted to pass what incidentally are corrupted components.
    You may be able to locate and fix each reported record only by using a utility provided by John Morgan, called ABFinder II. Send a message to the address listed in my Public Profile, and I'll reply with a copy. That application will allow you to identify the person referred to as CE45BC4E-4423-11DB-94EC-00050271EFEF:ABPerson, for example. By looking at both the error message and that specific record, you can correct the data in the referenced filed in that record, or recreate the record and delete the original.
    You cannot synchronize successfully via .Mac—particularly across both the Mac OS X 10.3 and 10.4 mixed environment you have—until you either correct the underlying issue record by record, or do a wholesale replacement of the corrupted Address Book on your source computer from some other uncorrupted source: .Mac, a backup - something that does not contain the records with nil values.
    The particular circumstances of your issue are complex, and really not at all clear. I cannot tell you how the initial corruption occurred on a record by record basis, or even how to avoid it in the future. If you hope to fix it, you'll have to be patient and attempt to do so record by record if no intact, uncorrupted copy of your contact record set is available. There is no quick fix to save the existing data.
    And, Austin's right: there really is no one to talk to, though you could drag your source computer into an Apple Store and ask an Apple Genius to look at it, or go to an independent authorized dealer and ask someone familiar with such issues to look at it. You can find a service location by using this tool:
    http://www.apple.com/buy/locator/service.html

  • To anyone whom can please answer this question please!!!!​!!!!!!!!!!​!!!!!!!!!!​!!!!!!!!!!​!!!!!!!!!!​!

    Does my HP Stream 7 have a tracking device on it I need to know because my tablet just got stolen around 1:00 PM today.
    This question was solved.
    View Solution.

    Hi,
    Very sad to say No.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can some one simply answer this question with me going round and round in circles,.,I am in Australia. Do I use the British or US firefox download.

    I am in Australia. Do I use the British or US firefox download.
    I am having extreme difficulty getting a simple answer to this question.
    I just keep getting sent back and forth to different firefox sites for more details, or ask community, go to an answer site etc etc.

    Maybe best to install the British version and install the Australian dictionary.
    *https://addons.mozilla.org/en-US/firefox/addon/english-australian-dictionary/

  • No one can answer my question?!

    Oracle 8i for RedHat 6.0 Linux.
    Our web application accesses the back-end oracle database to generate some reports in the web browser. (using JDBC)
    For the same report SQL script, if we run it from 'SQL*PLUS', the performance is OK. But if we run the same report from browser, the performance is very very bad. Say, it takes 2-3 seconds to run a report SQL in SQL*PLUS, but in browser it will take 10 minutes to get the report.
    For the same application and same oracle database, the performance in browser and SQL*PLUS are almost the same in Solaris. (hardware config is also the same)
    My question:
    1. Is that possible that we don't config the Oracle for Linux
    correctly? If so, what should we check?
    2. In our case, since it is related to SQL*NET, how can we check the config of SQL*NET is right?
    3. Is that possible that because of Linux or Oracle for Linux?
    4. Since we use JDBC, how can we check JDBC run OK or config correctly?
    Thanks a lot!
    null

    It's probably the Java part that's causing the speed problems. You can prove this easily enough by including some time stamping debug information in your Java code .... i.e log the time before and after you run the select statement.
    null

  • Probably everyone can answer this question

    Hello everybody out there,
    As I can't find a clear answer in my FCP-manual, I'll ask my very simple question here...
    What I want to do is select a segment (V, A1, A2)in my timeline, ripple delete it and then paste insert my selection into another part of the timeline. Pretty basic I should say.
    As I like to do this as fast as possible and using only my keyboard, I tried it the way I used to do it on the AVID.
    So, in this case:
    *I make an IN-OUT selection with 'x'
    *I ripple-delete with the delete button
    *I set an IN-point somewhere else in the timeline, where I want my selection inserted and press 'arrow-V'.
    And then some old selection appears, instead of the segment I had just ripple-deleted before!
    So what am I doing wrong?
    Or am I asking too much wanting to insert paste the same selection as I just ripple-deleted, without any mouse-movement?
    And in case it's not possible... what will be the fastest way then?
    Best regards,
    Robbie V., Amsterdam, the Netherlands
    Mac Pro Mac OS X (10.4.7)

    For the record, the drag-then-Option method is just one keystroke. That's one long keystroke and one long mouse click.
    The other method is three keystrokes and two mouse clicks. (And you have to make sure your AutoSelect buttons are in the correct state for the tracks you want to paste the clips to. If not, then there are more mouse clicks involved.)
    Not that I'm counting, mind you.

  • XBox 360 and WRT54GS no one can fix this. Please help if you can?

    I'm totally out of ideas here and would appreciate it if someone could help me?  We have 2 XBox 360's both with the Microsoft XBox wireless adapters.  My son has had his since they first came out whatever year that was.  My youngest daughter got hers last October.  Both XBox's connect to XBox LIVE without a problem via a Linksys WRT54GS wireless router.  The problem we can't solve is - my oldest daughter and son-in-law live about a mile from us and they have an XBox 360. When we try to connect to their XBox (or anyone else that's local) to play against her and her husband, it won't connect and gives us a "Disconnected" prompt every time. They have no problem connecting to other XBox's locally but we, for some reason, can't.  I can connect our XBox directly into our cable modem bypassing the Linksys and it connects to them, so it isn't the cable modem.  I've changed settings on the router, internet, XBox with no luck.  I've updated the firmware.  I've read thru posts on the internet for weeks and now my brain is mush.  Is this fixable or do I need to buy a new wireless router?  Also, I don't know if this has anything to do with anything but we have 3 PC's and 3 DVR's also connected to the internet but are hard wired.  My kids and grandkids have DSi's, a Playststion3, and a Wii and those all connect via wireless and work great.  XBox has this WRT54GS listed as compatable.  I'm stumped.  I know there's some really sharp folks out there somewhere.......please help if you can?  Thanks for any help you could offer!

    Have you opened the ports on the router....?
    If not then,you need to open ports 53-3074 on the router..Read this link. Also,under the security tab on the router,uncheck Block Anonymous Internet Requests and click on Save Settings...

  • Paypal $25 to anyone that can answer this question!

    Was is the proper script for the main menu's "Play Movie" that will resume after the show has been started?
    Beleave me, I just all confused about scripting, some other websites have not been too clear for me.
    -Eric

    YOU OWE ME 25 BUCKS MISTER, HERE IS YOUR SCRIPT:
    Ill break it down for you so you can understand the purpose of each part and why its there.
    1 Goto 3 if (GPRM 1 = 0)
    2 Goto 5 if (GPRM 1 != 0)
    3 mov GPRM 1, 1
    4 Jump Track 1 (insert your track name here)
    5 mov GPRM 1, 0
    6 Resume
    There you go, now for the dissection:
    1 Goto 3 if (GPRM 1 = 0) This basically says, if the value of GPRM 1 is equal to 0, then jump to line 3 in the code, if the value of GPRM 1 is not equal to 0, go to the next line. Since the value of GPRM 1 will always be 0 when you first play the DVD, it will always jump to line 2 the first time around.
    2 GoTo 5 if (GPRM 1 != 0) This is saying if GPRM 1 is not equal to 0, go down to line 5 of the script.
    3 mov GPRM 1, 1 This is what is executed after line 1 if in the first line, GPRM is equal to 0, this is now taking GPRM and adding a value of 1 to it.
    4 jump track 1 After GPRM has a value of 1 added to it, it is going to jump to your track and start playing at the beginning of the track, just as a normal PLAY MOVIE button would do.
    5 mov GPRM 1,0 This is resetting GPRM 1 back to zero for the next time around. This is where the script jumps to after you have returned to the menu, if you remember in the first part, the script reads the value of GPRM 1, since on a return to the menu, GPRM 1 now has a value of 1, meaning that in line 2, GPRM is not equal to 0, and it will jump to line 5 in the code. after executing this and resetting GPRM to 0, it will jump to the following line:
    6 Resume. Your track will resume to where ever you left off before coming to the menu. viola, your now neck and neck with the big boys.
    Hope this works, I tested it out and it worked for me. You can email me if you want and I will send you the actual script that I saved. It is important to remember that you need to set this as a pre-script on the track you want it to effect.

  • Im surprised no one can answer this....

    I have an external hard drive , i cut and pasted my itunes library there. when i started itunes i changed the folder in preferences to point where the liobrary is now at. itunes is not recognizing this, i have tried to consolidate the library with no luck...what have i done wrong?
    thanks

    I'm not sure about "cut and paste". If you have iTunes 7, then you can just drag the entire iTunes folder to your external hard drive. Then hold down the Shift key while launching iTunes. You'll be given a dialog box where you can select the iTunes library you want to use. Navigate to and select the iTunes folder in it's new location on the external.

  • Why does Apple have so many other languages into their devices but Swahili language from East Africa isn't added? Could somebody help me answer this question please? Thanks!

    Hopefully someone inside Apple will see this and help us People that are using Apple devices but we do not have the option to change to our own language. Please Apple People look into this and consider it as a lot of people speaking Swahili are using apple products. Thank you in advance for your consideration.
    Message was edited by: anne.mafie

    If Swahili is not on the list and you would like to recommend it to Apple, please tell them at http://apple.com/feedback
    This is the User support forums operated by users just like yourself.  Apple rarely appears here.

  • HT204088 why cant i resend a tax invoice related to app purchase?? the button is there but when click it says cant do it now!!!! VERY ANNOYED also trying to find somewhere/one to answer this question ie email....

    why doesnt resend on purchase history work??? VERY VERY ANNOYED trying to get aresponse and answer to this!!! found a tax invoice i need printed from last year , hit resend and it says 'SORRY cant do that right now, come back later'

    Ask iTS to email you invoices for your purchase.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Importing EDLs and Reconnecting Media... Who can answer this question?

    Hi, happy holidays! What am I missing here:
    I have an EDL with in and out points from a number of different source files.
    I import the EDL in Final Cut Pro as a sequence.
    I click on the sequence. The edit decisions can be seen in the timeline, with all of the source files designated as offline.
    I select the timeline and attempt to reconnect the media.
    The media reconnects, no problem, but the edit decisions aren't in place. In other words, all of the media files begin at the beginning of the source media files (i.e. 04:00:00:00), rather than at the edit decision in and out points for each of the edits in the timeline.
    Surely I'm just missing a step here, right?
    Thanks, Mtbakerstu

    Hi Jerry,
    The source files have been have been re-encoded with a different codec, but they are exactly the same insofar as duration of the source files, and the timecode hour and frame rate they have been assigned, as well as the name I have assigned the files.
    I am simply trying to trick the EDL into recreating a timeline which utilizes source files which have been encoded differently than the original source files... And the timeline is recognizing these files.... only it won't cue the files up to correct timecode point in the files.
    Hope that makes sense.
    Thanks,
    Mtbakerstu

  • No one can answer this......

    Ther are a few people on the forum here who can't connec to their home wireless network. iPhone picks it up and displays the wireless icon at the top but when we try to go online it drops out and connects with 3G or EDGE.
    Has anyone got a clue about what is going wrong?
    Thanks,
    COlin

    This was happening to me. I switched 3G to off and bam! my wifi connection established without a problem. I think it has to do with the 3G signal trying to establish with a tower and thus causing some sort of problem with the wifi. So whenever I'm home I turn off 3G.

  • No-one to answer this question

    Hello
    Truncation of characters while priniting reports.
    We have many reports (mostly layout style will be mailing label or form letter) in which one column (say company name) is variable. That column may come many times in each paragraph in a report.
    When we running the report it looks Ok in screen/previewer. But while printing, some characters are getting truncated in right side of the page.
    Any solutions?
    Thanks in advance.
    Rehan

    Hello
    Truncation of characters while priniting reports.
    We have many reports (mostly layout style will be mailing label or form letter) in which one column (say company name) is variable. That column may come many times in each paragraph in a report.
    When we running the report it looks Ok in screen/previewer. But while printing, some characters are getting truncated in right side of the page.
    Any solutions?
    Thanks in advance.
    Rehan
    Hi
    Did u try changing the property of the field ( Horizontal Elasticity to Variable ) .
    I Think that might solve ur problem
    Still if u have problem let me know
    Sri

Maybe you are looking for