No one knows what happened to my z3
I used to live in IReland and i bought a new z3, later I traveled to Qatar where my z3 suddenly stopped working after using it in the the pool to check who missed called me and did not even submerge it , later at the same night phone stopped working, I closed it took the sd and sim out hoping that it will dry, it didnt it has been 5 days, took it to sony service center willing to do anything to fix my phone, they refused saying its not from the region and they are not allowed to fix it, local workshops told me it is not water damaged, Now i have a phone where i can hear the touch screen working while slidding the audion still working, wifi still working but no brightness can not see anything, im really upset, and pissed for this very poor service they refused to fix it even though im willing to fix it and asked me to go back to ireland to fix it , haaa really disappointed and didnt expect this poor service.
just to eliminate it as a possibility, try a software repair first via pc companion even though it may be an unlikely fix - after that get in touch with who you need to speak to in Ireland and find out how much it will cost you for them to look at it - alternatively, weigh up an out of guarantee repair via the service centres in Qatar - it's understandably frustrating that the guarantees aren't worldwide, but if you're prepared to pay for expedited international shipping the prejudice to you may not be much bigger than that, as all repairs are undertaken behind closed doors now......
Similar Messages
-
Hi, Dos any one know what happened to the Live Chat in Help & Support page?
I an't seam to find Live Chat link any where on BC. Can some tell me what happen to it
iToy users don't need tips. Just point and finger-wag. No thinking, just doing is the new paradigm.
-
Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the brightness is to low and i can see any thing!! and i want to know why is happen
Assuming you mean that you performed the repair yourself, it would seem that you either obtained a defective screen or you did some sort of damage when you replaced the screen. You can try asking for assistance on ifixit.com, a site dedicate to those attempting their own repairs, or you can take the iPad to a shop and pay them to try to correct the problem for you. Apple will no longer touch your iPad now that you've attempted your own repairs.
Regards. -
Hello guys!! I have a problem with my old mac book. Today when I am switch on one white screen appears and after seconds this white screen continue with one interrogation mark!! Someone knows whats happen?? It does not starts !! I have a feel of work inside and I am afraid!! someone may help me??
your English was quite good enough to tell us that you saw this
Niel has advised you well.
If you have a more complicated problem, you can write in your language. Most all of us can translate with Google very easily... see
Español
Si usted tiene un problema más complicado, se puede escribir en su idioma. La mayoría de todos nosotros puede traducir con Google muy fácilmente ... ver
Português
Se você tem um problema mais complicado, você pode escrever no seu idioma. A maioria de todos nós pode traduzir com Google com muita facilidade ... ver
buenos tardes
ÇÇÇ -
More details about the problem : My computer is a Mid 2012 Mac Book pro 2.9GHz i7 processor with 8GB RAM updated to OS X v10.8.5
- I ran a compleet scan of my computer for any threats ( I used virus barrier express ) and there was nothing identified
- When I oppened the Activiti Monitor there are about 20-30 processes which I do not undersatand they are run under the user "root" 2 in perticular ( Kernel_task & fseventsd ) they both take up a lot of threads and kernel_task is constantly using 1.2 GB of "real memory" which is at least 20 times any other process that is running espesially the ones that run under the user "Apple" I do not know if this is causing the problems on my mac but i tryed to forces close it and it dose not even let me click the button, the others close but reopean immideatly. I will attach a screen shot of what i have mentioned here.
- The problems I am facing are mainly performance :- To state a few examples, my mac dose not seam to be able to handile even the smallest tasks like switching tabs on safari, typing any thing, playing a movie withought stopping inbetween, etc.. ( let me elaborate on why I said its not able to handil these tasks, it is because when I am trying to do any one of the afformentioned tasks inbetween the cursor becomes a rainbow collered spinning disk and I am unable to do anything for about 10 seckonds after which it starts to work again for some time before it happens again. )
- Another concern of mine is that my mac seems to be on even with the lid closed if I do not shut it down compleetly, if i just close the lid after some time the computer starts warming up, and the fan starts running. the battery is drained at the same rate or slightly less rate than it would have if i was using it normally with the lid opean. ( altough this is happning the screen dose not turn on untill the lid is opean again )
- I have only 300+ GB full out of my 750GB so i believe these are not issues caused by my mac's memory being full ( BUT THE FIRST TIME I NOTICED THIS WAS HAPPNING WAS WHEN MY MEMORY WAS ABOUT 720GB FULL WHEN THESE ISSUES FIRST AROSE I IMMEADITLY DELEATED 400+GB OF MY USELESS FILES THAT I HAD BEEN HORDING ALL OF WHICH WERE MOVIES ) that about covers it all PLEASE LET ME KNOW IF ANY ONE KNOWS WHAT TO DO.
Ps: I apoligize if I have given too many unrelevant details, not enough usefull information and or if i was just all over the place with my explanations but I am really frustrated and was hoping not to miss anyting. Please let me know if any information at all is required and ill do my best to provide it.
Thank YouStart with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
I do not know what happened, all of a sudden Firefox does not want to work anymore. Had been conected to audible. Retried about 4 times.... no luck had to force quit every time. The three Firefox app. into garbage, emptied garbage and redownloaded new version from Firefox. Reinstalled but same thing happened again... no connection.
What can I do, I like Firefox better than Safari, had it for years on my Mac.
Please let me know.
(Note: I have also mentioned this on the automatic response to the malfunctioning).
'''''Email removed by moderator to protect you from spam'''''Hey.
I think it might be the problem with one of your plugins.
Try to uninstall the webbrowser AND remove the storage from Firefox in your user-account (Linux: /home/username/.mozilla). You can check the list of installed Add-Ons in Firefox under "Extras => Add-ons" or by pressing Shift + Strg + A (Linux). -
I want to know what happened to my ipod, cause after a while that it was off when I want to run in on it gets lines, like if that would be broken and I have to turn off again..
What generation is your iPod? My sister's 2g/3g(I'm not sure which) was doing something similar, but it would put a different graphic on the screen every time. We took it in to the apple store and they didn't determine what it was. One thing they said to try was to restore it and gradually add content on to see if it's an app or something loaded on it. If that doesn't work then they said it's probably something in the software or firmware. They gave her the option of getting one exactly like the one she had or getting the new one like I have. She ended up getting the new one on sale at target.
-
My gyroscope not working, any one know what should I do?
My iphone4 gyroscope not working i think - meaning, though i have titltef the phone, changing of potrait/landscape did not happen! any one know what should I do?
Did you lock it (do you see the symbol showing it is locked up top)?
-
I erased an iphone on find my iphone , so i wanted to know what happened and I erased my without a sim card and now I says I cant go on it until i put in a sim card. Did i ruin the phone please help thanks.
You did not ruin the phone, you will need a sim card to activate the phone and then connect the phone to itunes and do a restore from back up.
http://support.apple.com/kb/HT1414 -
My iphone 4 doesn´t connect through Wi-Fi, Apple replaced my phone for a new one, but the new one has the same problem. I have an ipod third generation and it doesn´t have this problem. Having compared both working at the same time, the iphone alsways lags behind or doesn´t even connect to the internet via Wi-Fi. Does any one know what to do?? Thanks
Have you ever checked to see if there is an update for your router? If yes, then power off router. Then on iPhone go into settings and do a reset network settings. Power router back on, and try connecting phone to router.
-
What if my ipod touch 4th generation can't update and now the only option is to restore it.
And i don't know what happens if i press restore?
Will it show my back up and back it up or what?
And if that does happen will all my pictures stil be there?
Also i'm not on a apple computer.To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Either a PC or Mac work the same.
The photos in our iPod's Camera Roll album will be restored as will the last 30 days of photos in our PhotoStream album -
I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I am trying to download songs i recently purchased onto my ipod, they are not in my library but a seperate folder on i tunes ( dont know what happened there ) there is no cloud next to the new songs ! how on earth do sync them into my ipod. Please help
Hey liverpoolellie!
Here is an article that should be able to address this issue for you:
Syncing music to iPod shuffle
http://support.apple.com/kb/ht1719
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Anybody know what happen if iphone can not power On (black-out)? only connected external power source then it will show connect to itune.
all information lost & software can not be restored (Error 1611). Thanks.error 1611 http://support.apple.com/kb/TS3694#error1611
-
Yesterday stopped working camera application turns on but the screen is black. It does not work too flashlight. It is gray in the control panel. Maybe somebody know what happened if I need to return my phone service warrants.
Hello szpryczek,
Thanks for using Apple Support Communities.
To troubleshoot issues with your iPhone camera, please follow the steps below.
Camera
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
If the issue persists after the previous steps, please click the link below to contact Apple Support.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take care,
Alex H.
Maybe you are looking for
-
Plotting the position of a robot.
Hi, I am building a GUI that receives data from a serial port. Once the information has been handle, I divide the stream into pieces and display the numbers they contain into JTextFields. Each of these pieces indicate the x-y coordinates, of a moving
-
can we use debit cards to create apple id?
-
Executing Transaction GN_START, what does it mean?
Hi Experts, One of the manual configurations in SRM-ERP integration using configuration wizard is to execute GN_START transaction in SRM. What is the consequence of it? what will happen if i execute txcode GN_START in my SRM System? When i tried to c
-
Question about using ejb remote home vs ejb reference
hi guys i am new to EJB and want to understand the difference between these two. i notice that the ejb reference is declared in the ejb-jar.xml so that the calling ejb can get the home object by using initCtx.lookup("java:comp/env/ejb/CabinHome");whi
-
hello, is there any process/procedure documented on Migrating applications developed using weblogic workshop 8.1 to other application server such a websphere? may be this is the wrong forum to raise this question but i have been asked to prepare a no