No online information for the WRVS4400Nv2?

I just replaced a defective WRVS4400N with a WRVS4400Nv2. Now I can't find any firmware, updates or other online. Where is the information on the WRVS4400Nv2?
Sadly, the site and forum redesign is several steps backward in readability and usability. The light blue on dark is hard to read. Products are harder to find.

Very frustrating. I am in the same boat. I picked up a WRVS4400Nv2 a few weeks ago at Frys. Seems to be working good so far, was scared after seeing tons of bad reviews on the v1 model.
However, it's like it doesn't exist. There is nothing on the Linksys website about it. On Cisco, there is only information about the V1 model, nothing more than a FAQ on the v2 model.
Regarding current firmware of the V2, here is what I show in setup. Pretty annoying to buy a $200 router that doesn't seem to exist.
4-Port Gigabit Security Router with VPN WRVS4400Nv2
Firmware Version: V1.00.09

Similar Messages

Importing a CD, however the information for the music isn't online, yet the album is in the iTunes store.

Hey guys. Bought the new Ministry Of Sound album, The Annual 2014 and went to import the music onto iTunes.
The album is on the online store as I was tempted to purchase it there, in hindsight I wish I had, however I didn't and now the information for the CD cannot be found online and insists I could put all 40 odd songs and all it's data into iTunes myself.
I am happy to do that if I must, but surely if the iTunes store has all the information for the album I can transfer all of it to the CD.
If not what else could I do?
Thanks

The CD track identification in iTunes queries information from the Sony/Gracenote database, and interestingly, has nothing to do with the iTunes Store.
You might as well go ahead and type it in. If you wish to be a good citizen, you can then use the iTunes "Submit Track Names" feature to submit to Gracenote, so that your fellow MoS fans will save typing.

Need pin out information for the TB2644 J connectors

The online documentation for the TB-2644 interface block used with the 2532 Switch does not show the pinouts for the output connectors J1-J4. I need this information so that I can run ribbon cables to an external user interface.

Hello KLP,
Welcome to the NI Discussion Forums! If you search for 2644 on ni.com, you will get a link to the TB-2644 product page. This page contains some useful information on the terminal block. In the resources tab open the manuals link and you will see the 8 manuals associated with this device. The NI TB-2644 Installation Instructions has the information you are looking for. You can see the pinouts for the column and row connections on page 3 of the manual as well as some ribbon cables that will fit these connectors. The 2644 is used for matrix expansion in the Dual 8x32 and 2-wire 8x32 matrix modes for the card. The NI-Switches Help (installed when you install the switch driver) shows this information. You can find this help file in Windows in the Start menu under Programs -> National Instruments - > NI-Switch -> Documentation -> NI Switches Help (the documentation folder also has the specifications sheets for each switch and terminal block supported by your version of NI-Switch). If you go to the Devices section in the help file you will find the NI PXI-2532 listed. There is section on the 2-Wire 8×32 Matrix Topology and the 1-Wire Dual 8×32 Matrix Topology. If you check these you can see how each column and row is assigned to one of the connectors on the terminal block. The terminal block installation guide will show you the ordering of the pins. Hope this helps!
Regards,
Browning G
FlexRIO R&D

Could not find schema information for the attribute 'filename'

Can anyone help me.
I download the VB.NET sample source and try to run the application and got this error.
"Could not find schema information for the attribute 'filename'"
and
"Could not find schema information for the attribute 'url'"
and
"Custom tool warning:Schema validation warning:Schema item 'element' named 'AccountWS_AccountUpate_Input' from namespace 'urn:crmondemand/ws/account/' is invalid. Namespace 'urn:/crmondemand/xml/account' is not available to be referenced in this schema"
Thanks
Pitiporn

Are these errors or warnings? If warnings, you should be able to just ignore them.

I reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
(124525)

Warning Messages - Could not find schema information for the element applicationSettings - App.Config of a console app

This is my app.config file
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
   <configSections>
   <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
   <section name="IntelBrandFX.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
   </sectionGroup>
   </configSections>
  <appSettings>
   <add key="connStr" value="Data Source=tmvnasql1.tmvn.com;Initial Catalog=brandplan;Integrated Security=True"/>
  </appSettings>
  <applicationSettings>
   <IntelBrandFX.Properties.Settings>
   <setting name="IntelBrandFX_rollupViewerService_extract" serializeAs="String">
   <value>https://viewer.rollup.com/omdsp2008/extract.asmx</value>
   </setting>
   </IntelBrandFX.Properties.Settings>
  </applicationSettings>
</configuration>
And the Warning messages are
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'IntelBrandFX.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
Message 4 Could not find schema information for the attribute 'name'.
Message 5 Could not find schema information for the attribute 'serializeAs'.
Message 6 Could not find schema information for the element 'value'.
Althought they do no hinder me from successfully running the project. these messages are annoying. I have seen many articles on the web but could nowhere find the exact schemas for that the above elements that I could add to the DotNetConfig.xsd file.
Could somebody give me an idea how to create xsds for the elements above and include in the dotnetConfig.xsd.
I understand what needs to be done but not sure of the exact way to do it.
Thanks,

You don't need to modify the dotnetconfig.xsd. All you need to do is generate an XSD for your section and let VS know where it is at.
1) Create your XSD using any of the various tools available or by hand.
2) Copy your XSD into the <VSDir>\Xml\Schemas directory.
3) Create a catalog file for your schema.
4) Restart VS and it'll load the XSD and give you Intellisense.
Here's the MSDN documentation for it: http://msdn.microsoft.com/en-us/library/ms255821.aspx
Michael Taylor - 8/18/09
http://p3net.mvps.org

I just upgraded to iPhoto '11. When it was finished many pictures do not appear. I have a black box but the information for the picture is still there. Some are raw and some are jpeg. Also lost all albums. Can anyone offer assistance?

I just upgraded to iPhoto '11. When it was finished many pictures do not appear. I have a black box but the information for the picture is still there. Some are raw and some are jpeg. Also lost all albums. Can anyone offer assistance? Using iOS 10.7.5

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

SKIP SHIPPING / BILLING / PAYMENT INFORMATION FOR THE ORDERS FOR A STORE

We are trying to build 0$ evaluation store and would like to know if there is a
way not to force the user to enter payment type, billing and shipping
information for the orders getting placed as the customer is not really charged
for the evaluation kits purchased and not getting the physical shipment also. (
user can download the kit electronically by the link provided in the workflow
order confirmation mail ).
Please advice. Thanks.

Gatormomof3 wrote:
... Is it possible to add the "none" option??....HELP
AFAIK... Not if it is not offered...
You could Contact iTunes Customer Service and request assistance...
Apple Support iTunes Store Contact Us

Using Project Settings creates an app.config and dozens of errors about "Could not find schema information for the element...

I am trying to work with Application settings. I would just like to put together a very simple example of using these, but I can't get the most basic example to work. Virtually every tag regarding the new Settings produces an Error "Could not find the schema information for the element "applicationSettings". or the element "Settings" etc. etc. I am not using IIS, this is not a Web Project, and I am not working with User Settings. Just simple read-only Application Settings. I've read every MSDN page regarding this subject, I don't see that I am missing a reference - HELP !!!
REPRODUCING THE PROBLEM:
Step 1. Create a new C# solution and Windows Forms project.
Step 2. Add a reference to System.configuration
Step 3. Right click the project, choose Properties, then Settings.
Step 4. Using the Settings Designer, create ONE setting called "MySetting" as a String with the value "MyValue".
RESULT: Observe the Errors like these, complaining about all of the Settings tags and elements.
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'LoadOriginalLists.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
HERE IS MY APP.CONFIG, AS GENERATED BY THE SETTING DESIGNER TOOL:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="LoadOriginalLists.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<applicationSettings>
<LoadOriginalLists.Properties.Settings>
<setting name="MySetting" serializeAs="String">
<value>MyValue</value>
</setting>
</LoadOriginalLists.Properties.Settings>
</applicationSettings>
</configuration>

Ummmm... okay so these are Messages that are in the Error List. Whether or not they are actually Errors is debatable. They are in the Error List, so they are errors.
The application runs, so my question is slightly changed to the following.
I would like to use Application Settings. However, having settings in my app.config pollutes my Error List with a bunch of meaningless messages like "Could not find the schema information for...". These messages then hide real errors.
Am I missing some setting or is there something I can do to make Visual Studio not show me these messages?

Error messages or information for the invalidation of those procedures

Hello expert:
I have a few procedure invalidated . in principle , those procedures should be validated automatically when they are called somewhere. but they don't, that means there are some error blocking them validated. please where I can find out corresponding error messages or information for the invalidation of those procedures.
Many Thanks.

CREATE TABLE t
AS
   SELECT 1 id FROM DUAL;
CREATE OR REPLACE PROCEDURE my_procedure
AS
   v_id   t.id%TYPE;
BEGIN
   SELECT id INTO v_id FROM t;
END;
CREATE OR REPLACE PROCEDURE my_proc2
AS
BEGIN
   my_procedure;
END;
exec my_proc2;
DROP TABLE t;
ALTER PROCEDURE   dsamstrc.my_proc2
   COMPILE;
SELECT *
FROM SYS.USER_ERRORS
WHERE NAME = 'MY_PROC2'
       OR NAME IN (SELECT REFERENCED_NAME
                     FROM dba_dependencies
                    WHERE NAME = 'MY_PROC2');
NAME     TYPE     SEQUENCE     LINE     POSITION     TEXT     ATTRIBUTE     MESSAGE_NUMBER
MY_PROCEDURE     PROCEDURE     4     4     2     PL/SQL: SQL Statement ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     3     4     27     PL/SQL: ORA-00942: table or view does not exist     ERROR     0
MY_PROCEDURE     PROCEDURE     2     2     10     PL/SQL: Item ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     1     2     10     PLS-00201: identifier 'T.ID' must be declared     ERROR     201
MY_PROC2     PROCEDURE     2     3     5     PL/SQL: Statement ignored     ERROR     0
MY_PROC2     PROCEDURE     1     3     5     PLS-00905: object DSAMSTRC.MY_PROCEDURE is invalid     ERROR     905wonder if something like this would work if the dependencies were more than 2 deep.
SELECT distinct *
FROM SYS.USER_ERRORS
WHERE NAME in
       (SELECT name
        FROM dba_dependencies
connect by nocycle name = prior referenced_name
start with NAME = 'MY_PROC2')
order by name;Edited by: pollywog on Apr 4, 2011 2:49 PM

[Devices Page] Show more information for the offline devices

Spotify should show more information for the offline devices that are under a user's account. The main reason I ask is because I have noticed on numerous occasuions that multiple devices in the list show the exact same name.
An example in the screenshot below:
It would be great if each device had more information e.g MAC address, last IP access, computer name and so forth.

Updated: 2015-07-28
Marked as new idea and edited the title slightly to make it easier to find via search. ;)
You might also want to add your kudos to a similar idea about the ability to name offline devices here.

I have recently been asked to research information for the following.

I have recently been asked to research information for the following.
Add a backend SQL server to the current Access 2010 set up we have in place as the front end, for 11 users.
Upgrade to Access 2013 which I understand includes the SQL at no additional charge.
I am looking for pro vs cons between the two options.

Hello,
Your number 1 option was called “Upsizing an Access Database to SQL Server”
and keeps the front-end on the Access side. The issue here is that the upsizing process was not always an easy one: you may find some issues with the way SQL handles dates and the way VBA generates those dates; VBA handles strings with double quotes
while T-SQL uses single quotes; VBA functions like Date() and Now() should be replaces by T-SQL functions like CONVERT/CAST and GETDATE; InStr and Mid functions should be replaced by Substring function on T-SQL; the IIF function should be replaced by the CASE
statement (T-SQL); need to convert Access table constrains to SQL Server constraints; etc.
Now with Access 2013 (Option 2), you don’t have to think about the above upsizing process anymore, since that old access project/linked server functionalities are
replaced by natively use SQL Server databases. That means no more 2 GB limit for Access databases.
Now Access 2013 makes available the possibility to use SQL Server Reporting Services for reporting and opens the gateway to SQL Azure.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to findout the data source information for the perticular tables

Hi,
Can you please tell me the process to findout the data source information for the perticular tables .
For ex.. T2503 ,T2507 ,T25A1,T25A2 etc ..
I am doing a reverse engineering to find out the data sources build on the above SAP Tables.
Thanks.

Hi,
Still we haven't get the field level information ,before they send us we should first give them the corresponding data sources for the COPA tables which they have given .
I have searched in help.sap.com but I didn't find any information on this .
Please let me know is there any way to know the data source details for SAP Tables.
Thanks

Can somebody decipher the online help for the one button dialog?

So I was looking at the online help for the one button dialog and there is an extra paragraph compared to the LabVIEW help.
Clicking on the link goes to a help specific to the Embedded module for the ARM microcontroller. Does this really have much to do with the one button dialog? Does it belong here?
Just wondering. I am not familiar with that module....
LabVIEW Champion . Do more with less code and in less time .
Attachments:
OneButtonDialog.png ‏47 KB

The same is true of the online help back to LV2009 inclusive, which (I believe) would be the first to contain the linked dialog too.
CLD

Free online test for the Beginners( to Practice and attened ).

Hi,
I want to practice the online oracle test can it possible. I searched so many in google, but it is not free we have to pay. I want free online test to practice.
And one more thing which is the test to attened for the beginners. And what is the details of that can any one provide me the details.
Thank u...!
Ravi

Good luck in finding it for free.
For information about which exams, which classes, and so on - go to http://education.oracle.com and click on Certification.

No online information for the WRVS4400Nv2?

Similar Messages

Maybe you are looking for