No Open Items were found

Hi
I am trying to clear open items using F-44
I am getting an error "No Open Items were found" .
But when i go and see in FBL1N , I can see the open items there.
What can be the reason ?
PS: The posting date of the items is in 2005. Is this causes any problem?
Thax. for your help.
-erpMAN-

The most common reason is that the invoice is in a payment run.
try to run a f.80 on the invoice in question ( in test mode) to see if you can reverse it.
If you cant more than likely it will be in a payment run.
Have a look in the payment run tables to confirm this. REGUH & P
Are you sure the document is an open item? Is it in BSIK or BSAK?
Hope this helps.

Similar Messages

Post with clearing: FB05 No open items were found

Hi,
I am using FB05 (have selected 'transfer posting with clearing) to clear the vendor open items and post to a GL account, but I encounter the message 'No open items were found' (Msg F5 170) eventhough the vendor has open items and morever it is not blocked.
Any reason why this error.
Tks,
SS

There can be any number of reasons why a standard transaction does not pick up open items for your vendor account. Some possible reasons are:
- outside date range, if you are giving a date range
- they might be special g/l transactions, not normal line items
- they migh not be open line items, but noted items
- the items might not be open anymore when FB05 is being run
Do a little more investigation into your system - we can only give suggestions from here.
Regards
Gulshan

TCode - FF67 - Manual Bank Reco - No open items were found

Hi all,
We are getting the above error message on executing TCode - FF67 with the following steps made for the customisation of " Manual Bank Reco " :
1.     Create Account Symbol
2.     Assign Accounts to Account Symbol
3.     Create Keys to Posting Rule
4.     Define Posting Rules
There is no Bank Statement available with me since I am doing the testing in " Development Server ". Hence I have posted one entry on 30.03.2008
Elect. Acct...........Dr......Rs.2000/-
To Vendor Acct.... Cr...................Rs. 2000/-
Assuming that Cheque Payment for the above amount has been cleared in UBI (Bank),I have now started executing TCode - FF67
Bank Key - UBI
Bank Account - 17782
Currency - INR
Statement Number - 1
Statement Date : 01.04.2008
Opening Balance : Rs. -22869/- (negative as per system since Bank GL created under liability)
Closing Balance   : Rs. - 24869/- (After deducting further Rs. 2000/-)
Posting Date : 31.03.2008
Bank Postings Only - > Selected
Press Enter -> Next Page of TCode FF67
Tran    - Value Date - Amount   - Allocation (assgn) - Bank Ref
CHOU - 31.03.2008 - Rs. -2000 -     Blank                 -    111
-> Save the data
When I go in TCode - FEBA
I have selected - Posting Area as " G/L Accounting "
and click on Overview, system has shown me Red Cancellation Sign with error message " To be posted " for Transaction " Y101 "
Further in same screen I have selected - Line Items -> Post. I got a window "Post with Clearing : Header Data", I went on entering for further steps till I received a message " No appropriate line item is contained in this document "
Giving details of Posting Rules Y101 for reference :
Posting Rule - Y101
Posting Area - 1 (Bank Acctg)
Debit :
Posting Key - <Blank>
Acct Symbol - CHECKOUT
Credit :
Posting Key - 50
Acct Symbol - MAINBANK
Document Type - KZ
Posting Type - 4 (Clear debit G/L acct)
Also giving Business Transaction setting for CHOU which is as follows
Tran        +-        Post Rule           Acct Mod               Int Algthm               Text
CHOU              Y101                    Blank                    11                            Check issued out
Giving specification details used in Tcode - FF67
Import Advices             -> Selected
Start Variant                  -> ZGSML created separated
Cust. Matchcode ID      -> D
Vendor Matchcode ID -> K
Processing Type           -> 4
Transfer Value Date      -> Selected
If anybody has a solution on this that will be highly appreciated.
Points will be assigned to proper answer.
Regards,
Shridhar Sawant
FICO
Edited by: Shridhar Sawant on Apr 25, 2008 4:16 PM

Dear all,
I am closing this issue since I got the solution apart from the mentioned above.
There is no need to change the Document Type since that will only change the Document type for e.g. from KZ to ZR, nothing will happen in the accounting entry.
Solution was there in the "Posting rule" which i defined for making Cheque Payment.
There are options of "Posting Type" - 1 which is for "Post to G/L Account" - In this case, system will Post the following entry Dr. Outgoing Bank Account & Cr. Main Bank Account without looking for any "Open Item".
Posting Type" - 4 is for "Clear Debit G/L Account", menans that if you are having "Open Items" and you want to clear those then only use this posting key.
While testing I had not posted any payment to vendor in Bank Outgoing Account hence no question of having "Open Items" in Bank Outgoing Account. And I had made the selection of "Posting Type" - 4, which require "Open Items" for direct clearing, hence was getting the subject error.
This is for everybodies information.
Thanks & Regards,
Shridhar Sawant
FICO

Cant use Kuler. Sorry no items were found message

Hi all,
After using kuler for a while, I reinstalled AIR and now I cant connect to kuler. I get "Sorry no items were found", and the application seems to freeze since i have to end the process to close it. BTW, another weird behaivor is that im able to login, but after succesfully loging in, it doesnt do anything.
Any clue? Im running Windows 7 and I googled the solution but only found it for Mac. (yes, i should get a mac, i already know that)
thanks in advance
E.

Hi Gajanan,
Sometimes what happens the documents get cleared at a later date than the date you are viewing them as open item in the G/L Account so system show those line items as open. Please check the documents if they have a clearing document number. If so then see the date of clearing. This will answer your question.
Regards,
Sanjay

No open items or found

hi frinds,
i have posted one invoice in f-22 and i am trying to clear that invoice through f-28 system is giving error no open iterms or found i have checked in fbl5n in that open items system giving this message ( no Items selected see long text)
Message no. MSITEM033
please give some suggestions
thank you
prasad

Prasad
The line items could have got cleared. You can go to FBL5n and then check the clearing document for these documents you are referring to. Then analyse what have created these documents, if your specific document is coming up in the cleared items list.
Else what I see is that the document that you have posted originally may not have posted. have you checked for any update errors? Firstly try to go to FB03 and see if the original document you posted is coming up. Then go to the header and check what is the clearing document for that document. You can analyse that the how the clearing document has been posted.
Karthik

Incoming EDI payment advise - open item not found

Hello,
I introduced the process of incoming EDI payment advise but with manual posting by using transaction F-28. Some positions in the EDI PA could
not be assign to an open item. I have a total amount, cash discount and net amount in the position listed. The system posts AKonto the net amount. What I want to do is to post total amount and to adapt the total cash discount.
For example:
total amount = 100 €
cash discount = 20 €
net amount = 80 €
The posting is actual as a difference to the debitor account with value 80 €. What I would like to have is the possibility to decide that the item is
posted as a difference to the debitor account but with value 100 €. 20 € cash discount should be visible in area "not assigned".
I found User exit EXIT_SAPLIEDP_102 table AVIP parameter "activate cash discount" but it seems that this one has no influence to our needs. Does anybody know if there is any other option to change the system behaviour?
Thanks so much!

check the posting date of the invoice and payment.
You can enter more, go to edit, select more.
Has one of the entries got a special GL entry.
Lastly if all else fails, on the selection screen enter both document numbers.
If only one appears, make sure it has not been cleared already.

Open item not found while doing process open items - F-32

The customer account shows 2 open items ( 1 Invoice and 1 Payment documents) during account clearing with f-32 t.code, only payment document is appearing. whether reason code maintained in invoice document any way afftects in account clearing process.

check the posting date of the invoice and payment.
You can enter more, go to edit, select more.
Has one of the entries got a special GL entry.
Lastly if all else fails, on the selection screen enter both document numbers.
If only one appears, make sure it has not been cleared already.

FI-FM: Partial clearing on account assignment (tcode fmfg_aapay)-No open items found

Hello!
We have activated business function PSM_USFED_PPAP3, then :
- Federal Government Functionality - activated ;
- settings in Financial Accounting (new)---> Basic Settings --> Ledgers --> Partial clearing on account assignment:
               - Activate partial clearing by acc.assignment:   Check
               - Maintain relevant ledger for Split view : no entries maintained (there is only one ledger "FM", which is the leading ledger, no special purpose ledgers)
               - Set supported document types: KR
               - Set payment block: B
Other settings:
     - FM activated, update profile 000101, document splitting (method 00...012), splitting characteristics: vobelnr, knbelnr, fipos, geber, gsber, fkber;
document type KR : business transaction 0300 (vendor invoice).
When we use tcode FMFG_AAPAY no open items are found (message FMFG_AAPAY009), even though there is a vendor invoice posted (tcode FB60, document type KR). The invoice is displayed in FBL1N as an open item and it is split according to the splitting characteristics (e.g. table fagl_splinfo is showing the split vendor items).
Can you, please, explain why there are no open items found in FMFG_AAPAY?
Thank you!

Dear all,
I am closing this issue since I got the solution apart from the mentioned above.
There is no need to change the Document Type since that will only change the Document type for e.g. from KZ to ZR, nothing will happen in the accounting entry.
Solution was there in the "Posting rule" which i defined for making Cheque Payment.
There are options of "Posting Type" - 1 which is for "Post to G/L Account" - In this case, system will Post the following entry Dr. Outgoing Bank Account & Cr. Main Bank Account without looking for any "Open Item".
Posting Type" - 4 is for "Clear Debit G/L Account", menans that if you are having "Open Items" and you want to clear those then only use this posting key.
While testing I had not posted any payment to vendor in Bank Outgoing Account hence no question of having "Open Items" in Bank Outgoing Account. And I had made the selection of "Posting Type" - 4, which require "Open Items" for direct clearing, hence was getting the subject error.
This is for everybodies information.
Thanks & Regards,
Shridhar Sawant
FICO

Vendor open item clearing issue

Hi sap gurus,
i have a very urgent issue that;
when we take the report fbl1n we see two open item for a spesific vendor;
1- 100 usd (debit)
2- 100 usd (credit)
however when we try to clear these two open items from t.code f-44 which clear each other the system says "no open item found"
i checked from table BSIK and see that there are two open item. fbl1n report shows two open item, but why i cannot clear it from f-44?
this is very interesting to me!
thx for your help.

i have solved the problem,
the open items were in payment list in F110.
we deleted payment list and the problem has been solved.

Is there a list of open items at key date per customer?

Hello,
In FBL5N you can get a list of open items for a customer at some specific date.
I'm looking for a summarized list that would give me a list of sums of open items for some customer per day, so I would see for example for one month what was the sum of open items for this customer on each day.
Is there already some similar report in SAP?
Thanks and best regards,
David

Hi,
I still don't think we understand each other.
If I run FBL5N I have option to select:
- Items that are or were open at the key date are displayed on one date
- All items posted on the posting date specified fromde date1 to date2.
- Items that were cleared at the clearing date specified
I would like a list of all items from option 1 (Items that are or were open at the key date are displayed on one date) so items that are or were STILL open and not yet cleared on one date, but not just for one date but for more days.
If I use your suggestion I get what items opened or cleared on one day not how many items were still open on particular day.
So a list of how many opened items were there at the day, and notjust items that were opened on that day but also all previous items that were not yet cleared at that day.

Problem with customer open items. Transaction FBL5N and F-30

Hi all,
I have a little problem with a customer.
When I see transaction FBL5N, I can see 3 open items, but, when I go to clear then in F-30, no appears.
Anybody can help me.
Thanks in advance

Hi all,
I have solved the problem
The problem was that exits a proposal where these open items were.
I have deleted this proposal, and then, I could create a post with clearing.
Thanks everybody

Clearing of open items- inter company transfer

Dear All,
I made some intercompany postings for vendor open items. When i am clearing the open items (receiver company code) of vendor through F-53 system says " No open items found". But through FBL1N i can see these as open items.
Thanks in advance
Regards,
Sankar

Hi madhu,
      OBYA - i already settings for inter company code postings. I already made that and make posting also.
Now the problem, i transfered open item of vendor(1) of 100(Dr) from sender company code(1234) to receiver company code(ABCD) to the vendor(2) 100(Dr).
   when i did this transfer sender company open item nulified and the same open item transfer to the receiver company code with open item status.
   Now i book one bill on vendor(2) receiver company code (ABCD) for 100(Cr). Now when i am clearing debit amount with credit amount through F-44 system generating a message that "open item not found"
   i choose document number in additional selections.
Regards,
Sankar

Open Items are being Displayed

Dear Friends,
USing T.code F-32, I select the customer account, Company code, Special GL and clicked on process open items.
Open items are displayed ex: Doc nos : 1,2,3, are displayed, but Doc no: 4,5,6 are not displayed. They have the same customer account and same gl accounts.
What should i check in order to know why there are not being displayed?
Please advise.
Regards
Sridhar
Edited by: Sridhar M on May 11, 2009 6:31 PM

Dear Friends,
Finally i was able to see the document nos which has Special GL W. Going to T.code F-32, I entered Customer no, Clearing date, Company Code, Currency.
In special GL ind, I entered W and deselected Normal OI and selected Document no and clicked on Process open item. The System asked for document nos, i entered the document nos.
The Open items were displayed with minus(-) sign i.e. credit amount.
How to clear the credit open items in F-32.
Please suggest.
Regards
Sridhar

F-26 sort order of Process open items

F-26 sort order of Process open items. Before the upgrade on 4.6c when we did F-26 and entered the billing document the open items were then grouped together at the top. Now in ECC the sort does not occur. Any ideas on how to fix this.

Try using F-05 to post the adjustment accounts.
Thanks,
Madhav Nanduri

Vendor open items Overdue Analysis on top of 0FIAP_C03 ---" NO DATA FOUND"

Hi All,
I have created a vendor overdue analysis query on top of 0FIAP_C03 same as days overdue analysis on top OFIAR_C03.
But when i am executing vendor open items overdue analysis i am getting " NO APPLICATION DATA FOUND" while my days overdue analysis of FIAR is working.
So can you tell what are changes that need to be made in vendor overdue analysis as i have exactly copied days overdue analysis except here its vendor not customer.
But i checked in ECC side data is there for vendor open item overdue analysis
Looking for a quick reply.
With regards,
Montz

I assume that there is data in the AP cube and the read pointer is upto date (ie all request are available for reporting)
When doing a list cube on AP can you see the data?
Then if all is fine it is a simple case of going through the RKFs and filters finding out where there is a join failure

No Open Items were found

Similar Messages

Maybe you are looking for