No open tasks, but Solution Overview shows open tasks

Hello,
we have a problem with the "Open Tasks" display. In Solution Overview for our QA systems are 14 open tasks displayed. When we click on the link and go to our Solution, none of our systems has open tasks, cause we re-initialized all QA systems.
But why are there 14 open tasks when all system belonging to this solution have no tasks active and configured? Refreshing in Solution Overview does not help.
Thanks for your help!
(Solution Manager 7 with SP-Stack 17)

Hello Andreas,
thanks for your post. We're already using ST-SER 700_2008_1.
But we found out how this happens. After customizing the tasks, we moved one system to an logical component (same settings, only a new name) inside the same system group. After this the old open tasks appears every time in the solution overview.
Solution:
Create a new solution and attach system from the old solution to the new solution. You can use the "Copy customizing function", the problem is related to the solution and not to single systems.
Hope this could help someone also.
Best regards
Kilian

Similar Messages

TS1363 Hi, I just got an iPod Nano 1st generation and I plugged it into my computer and open iTunes but it never showed up in iTunes. So then I updated my iTunes to the latest version but it still didn't show up so is there a way you all can help me A.S.A

Hi, I just got an iPod Nano 1st generation and I plugged it into my computer and open iTunes but it never showed up in iTunes. So then I updated my iTunes to the latest version but it still didn't show up so is there a way you all can help me A.S.AP.

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

I can't open a picture from Lightroom to photoshop using Cmd E, photoshops opens up but doesn't show the picture to edit

I can't open a picture from Lightroom to photoshop using Cmd E, photoshops opens up but doesn't show the picture to edit

Ok I sorted it, by uninstalling and re-installing Photoshop

HT5312 how do i open my mac, iam trying to open it but its only showing a question mark

how do i opem my mac, am trying to open it but its only showing a question mark

The question mark can mean several things. One the drive is failng, or has failed, or your Mac can't find a system folder to boot from.
Try booting while holding down the Option key. If the drive is available, it should show up in the Startup Manager window.
Read here > A flashing question mark appears when you start your Mac

Okay, I loaded the trial of Photoshop, have Creative Cloud loaded, downloaded Photoshop, trying to open Photoshop, but cannot, do I open it from the Creative Cloud App Screen?

Okay, I loaded the trial of Photoshop, have Creative Cloud loaded, downloaded Photoshop, trying to open Photoshop, but cannot, do I open it from the Creative Cloud App Screen?

It's not launched from the CC app.
If you have Windows, look under Program Files\Adobe\Photoshop CC
If you have a Mac, look in the Application Folder > Photoshop CC

Firefox opens ok, but crashes when I open a web page

I upgraded Shockwave and Flash today, and since then, Firefox will crash when I open a web page. Firefox itself opens fine, but opening Gmail or Facebook causes it to crash with a windows error saying it has crashed.
Im using...
Firefox 4.0.1 on Windows 7
Flash player V10 plugin
Shockwave V11.6

This is very consistent, happens within minutes? In that case, I suggest this test:
To see whether one of your extensions is the culprit, could you test in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

I click to open itunes but doesn't successfully open?

Hi
ive been trying to open itunes but when i go and click on it it wont successfully open completely? what i can i do?

Without system information and other details nobody can tell you anything. just saying "it doesn't work" is never a good way to ask for help.
Mylenium

Customer line item cleared but still it shows open item in FBL5N

Hi,
We have cleared one customer open item.
Posting date of Invoice is 08/12/2010 and
Posting date of Incoming payment is 10/12/2010.
But in FBL5N system still it shows the same cleared line as open item even though it is showing cleared document in the same line item.
With Regards
Ravi

Hi,
1)Check the Key date
2)Check if it was a partial clearing or not
3)Check if there are another open items inside the customer invoice, (e.g. 1 payment for several invoices or 1 invoices with mutli line items and contains different payment)
Hope this help
BR,
Jacky

Photoshop file corrupted, can open it but it only shows lines, preview looks just fine

Dear fellow photoshop users,
I got a serious problem.
today I had opened my photoshop file which I was coloring ( a comic page) I allready spend 3days on this comic and I just don't wanne start over .
I was working on it in CS6,
As friends suggested I had opened it aswell in CS5 to try if it works there but no it didn't. I also placed it in AI, but sadly again the ugly line picture shows up .
Can someone help me?
Thank you soo much

The preview is stored separately.
Yes, the file is corrupted -- you need to check your disk for other problems.
No, it is not likely to be recoverable.

I have the newest version of iTunes, and I cann open iTunes but I can't open the iTunes store, I click on it and then it says "iTunes is not working. Windows is checking for a solution" and then it closes.

Please help.
I can't buy anything!!!!!!

This happened to me after the last iTunes upgrade. The solution for my problem was to completely uninstall and reinstall my security software PC Tools Spyware Doctor with Antivirus) Just disabling it did not work.
There are however a lot of different fixes on other old threads.

TA24927 My videos aren't showing when I open Iweb, but they do show when I publish the site, any ideas why?

They do play in the browser just not in the application, makes it hard when I try to organize the page

Well, if the video displays after publishing then nothing is wrong.
If you cannot see the video in iWeb, then your code probably does not allow it to display in the application.
In that case, imagine that you see the video.
If that's too difficult, use a picture.

Clicking on document link opens Safari, but Safari doesn't open link

For some time -- even before upgrading to OS10.8 -- I've been having an issue with Safari. I receive links in emails or other documents, click on them, and when Safari opens, it fails to load the link. Sometimes I see the URL appear in the address bar for a moment, but it vanishes and I am left with a blank "Untitled" Safari page. If I then click on the email (or other) reference link again -- now with Safari open -- everything works fine. I've not seen this reported as a problem by anyone else so am wondering if I have a software conflict. There are two programs running from within Safari, one is 1Password (although that requires a manually entered password to open) and the other is Norton Identity. Perhaps one of those is a culprit. Anyone else seen this behavior?

More than likley, Norton is the culprit. Norton software has caused so many Mac users problems over a long period of time.
Results from an Apple Support Communities search for Norton > Community Search: Apple Support Communities
Follow the instructions at the Symantec/Norton site for uninstalling Norton Identity.
As for one 1Password. Using the pre installed Apple native Keychain Access utility is much better to use than third party. Keychain Access is located in HD > Applications > Utilities.
Remove Norton Identidy first, restart your Mac and try opening a link from email to test.

When I run the Receiving interface i get an error that the period is not open. But all periods are open from Jun 14 through April 15.

I am running the following inserts and all periods are open but I still get this error in the po_interface_errors table.
"Error: Please enter a GL Date within an open inventory accounting period.
Cause:        You provided a GL date that is not within an open inventory accounting period.
Action:        Enter a date that is within an open period."
Here are the inserts.
INSERT INTO rcv_headers_interface
(header_interface_id, GROUP_ID, processing_status_code,
receipt_source_code, transaction_type, last_update_date,
last_updated_by, last_update_login, creation_date, created_by,
vendor_id,expected_receipt_date, validation_flag)
SELECT rcv_headers_interface_s.NEXTVAL, rcv_interface_groups_s.NEXTVAL,
'PENDING', 'VENDOR', v_transaction_type , SYSDATE, v_user_id, 0,SYSDATE, v_user_id,
v_vendor_id, SYSDATE, 'Y'
FROM DUAL;
INSERT INTO rcv_transactions_interface
(interface_transaction_id, GROUP_ID,
last_update_date, last_updated_by, creation_date,
created_by, last_update_login, transaction_type,
transaction_date, processing_status_code,
processing_mode_code, transaction_status_code,
po_header_id, po_line_id, item_id, quantity, unit_of_measure,
po_line_location_id, auto_transact_code,
receipt_source_code, to_organization_code,
source_document_code, document_num,
destination_type_code,
deliver_to_location_id,subinventory,
header_interface_id, validation_flag)
SELECT rcv_transactions_interface_s.NEXTVAL,
rcv_interface_groups_s.CURRVAL, SYSDATE, v_user_id,
SYSDATE, v_user_id, 0, 'RECEIVE', SYSDATE, 'PENDING',
'BATCH', 'PENDING', v_po_header_id,v_po_line_id,
v_item_id, v_quantity,
v_unit_meas_lookup_code,
v_line_location_id, 'DELIVER', 'VENDOR',
v_organization_code, 'PO', v_po_number,
v_destination_type_code,
v_deliver_to_location_id, v_destination_subinventory,
rcv_headers_interface_s.CURRVAL, 'Y'
FROM DUAL;

I went to Inventory > Setup > Organizations
but I do not see a place to open a period under an organization. If there is another place to go let me know.
I looked under calendars but that does not have anything to do with periods as far as I can tell.

I downloaded Firefox version 4.0.1 today on a windows vista PC, and now I can't access firefox at all. I try to open it, but no firefox windows open up. Is there a way to fix this?

But when I try to uninstall the programme to try and download it again, it won't let me because it says firefox is still running, yet no windows are open.

I found that if I had a complicated session (lots of tabs open) that Firefox had trouble opening the first time (it has been fine since). To fix this I deleted my session files in my Profile after making a copy of them.
Here's how if you're still having trouble:
On Windows, your Profile is in "%APPDATA%\Mozilla\Firefox\Profiles" - paste that into the Run menu (Windows key + r) and look for session.rdf, sessionstore.bak and sessionstore.js. Delete those, restart Firefox and you should be on your home page. Good luck!

HT5622 i install app from app store and after finish i see (open window) but i can not open that what is problem?

i install some app from app store in my iphon 5s and after finish download open window appear near app but this window not work my mean is app not open
and also in phon display i can not find this app please tell me what is problem?
many thanks

Mac's do a pretty good job of keeping themselves tidy and not clogging up with masses of redundant files, so the use of cleanup utilities tends to be unecessary - - - and can cause more problems than it solves!
The apps that no longer appear in Launchpad - are they still in your Applications folder accessed through Finder? If so, try launching them from there and see if they reappear in Launchpad.
As for non-displayed emails, Clean My Mac may have wiped them. But try this - back up any important files, then select a folder in Mail (say, inbox), click Mailbox in top menu, then click rebuild (the last option on that menu). If they do not reappear, then you could try accessing them from your mail/internet provider providing you have opted to keep messages on server.
As a last resort, you could try restore from Time Machine - you do keep a backup don't you?

No open tasks, but Solution Overview shows open tasks

Similar Messages

Maybe you are looking for