No "Open with Rosetta" option for Dreamweaver 2004 MX

I have a new Intel Mini 1.66 Core Duo with 2 GB RAM and I cannot start up Dreamweaver 2004 MX 7.0.1 I tried to use Rosetta in the "get info" link but the "open with Rosetta" does not appear as an option even though it lists the "Kind: Application (PowerPC)" The program just hangs up with a "program not responding"
The program DW 2004 works fine on my PowerBook G4.
Any ideas? The program did not want to install in the Intel mini, so I had to copy the install file (*.sea) over top of stuffit to get it to install.
Please help.
Thanks

I tried to use Rosetta in the "get info" link but the "open with Rosetta" does not appear as an option even though it lists the "Kind: Application (PowerPC)" The program just hangs up with a "program not responding"
This option will only appear when an application's kind is reported as being Application (Universal) and you are using an Intel Mac, as this is the only configuration which gives you the option to choose between architectures, and the checkbox only appears when running both architectures is possible with a given application on your model of Mac. If you are using a PowerPC-only application on an Intel Mac or a PowerPC or Universal application on a PowerPC Mac, only the PowerPC code can be executed, and the Open with Rosetta checkbox will not appear.
(14790)

Similar Messages

Can't find "open with Rosetta"

So, I followed the Help directions - I closed Safari, ctrl-clicked it in the applications file, and chose Get Info. But in the General section, there is no "open with Rosetta" option. What do I do?

Hi Lisa
I was able to listen to content on the site via the free plug-in Flip4Mac. Download a copy and install it (it replaces Windows Media Player with Quicktime, allowing you to play Windows Media content through QT). Then restart Safari and try the site again.
See if that makes a difference.

ORA-10827: database must be opened with MIGRATE option

Hi,
We are trying to migrate an Oracle 8.1.7 database to an Oracle 9i(9.2) database. I moved all the database files to the appr folder and I created a new instance using:
oradim -new -sid PROD -intpwd Oracle -startmode a -pfile C:\oracle\OraDb\Neuropace\initPROD.ORA.
I checked the alter log file and I get the following error:
ORA-10827: database must be opened with MIGRATE option.
How should one go about migrating a database(different versions). I went ahead with the migration. I opened the database using
alter database open resetlogs migrate.
But when i log into the database, I get an internal code error.
Any pointers?.

You must not open normally your database after an upgrade, in short the method is
1) startup migrate
2) run the upgrade script (which one depends on your old database version)
For step-by-step instructions see
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96530/upgrade.htm#1009200
'alter database open resetlogs migrate' is only applicable to upgrades from version 7 to 9.2, hopefully your database is not corrupted now.

I have an issue with disappearing option for 1920x1080 in Preferences / Displays.

Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080. This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
I have tried:
Power down Monitor & restart
Shutdown & restart
Shutdown & restart in Safe Boot Mode (options same in Prefs)
Power down Monitor & restart in Safe Boot Mode
Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
Udated Pram
I am now at a loss, I guess I could try a recovery, and download/install Mavericks again, but do not wish to do this if I can help it.
I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
Anyone out there have any ideas, please.

Back up all data. Quit System Preferences if it's running.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Preferences/ByHost
In the Finder, select
Go ▹ Go to Folder...
from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
Test.

Playing dvds with vlc ... no right-click and 'open with vlc' option???

i searched discussions for this question but wasn't sucessful ... so here's my question:
i use a toshiba pc laptop and an iMac G5 ... in order to watch dvds (with different region codes) on my PC, I use VLC with great success ... I wanted to do the same on my iMac, but came across the following problem:
when I want to watch a DVD on the laptop, i simply right-click the title and go for 'open with VLC' (which gives me the menu and so on) ... when I try to do this on the iMac, however, there is no
'open with VLC' option when I right-click the DVD ... I can open single chapters of the DVD by opening the single .vob files, but I'm not happy with doing that ...
any ideas how to make watching DVDs with VLC on my iMac as easy as it is on my laptop?
thanx for your help!
2.1 GHz iMac G5 1.5 GB DDR2 SDRAM Mac OS X (10.4.6)

found the solution by myself: open vlc, open the playlist and drag the dvd onto the playlist, then hit play ...

Watching dvds with vlc-no right-click 'open with vlc' option as on the pc?

i searched discussions for this question but wasn't sucessful ... so here's my question:
i use a toshiba pc laptop and an iMac G5 ... in order to watch dvds (with different region codes) on my PC, I use VLC with great success ... I wanted to do the same on my iMac, but came across the following problem:
when I want to watch a DVD on the laptop, i simply right-click the title and go for 'open with VLC' (which gives me the menu and so on) ... when I try to do this on the iMac, however, there is no
'open with VLC' option when I right-click the DVD ... I can open single chapters of the DVD by opening the single .vob files, but I'm not happy with doing that ...
any ideas how to make watching DVDs with VLC on my iMac as easy as it is on my laptop?
thanx for your help!
2.1 GHz iMac G5 1.5 GB DDR2 SDRAM Mac OS X (10.4.6)

If you want all video DVDs to open in VLC, go to System Preferences>CDs & DVDs>When you insert a video DVD:>Open other application> and now select VLC.
This will open VLC, but the DVD will not automatically play, you have to go to File>Open Disc once in VLC.
One question though, why not use Apple's DVD player Application?
Daniel Gilmour
eMac 1.25 Ghz, iBook 14'' 1.42 Ghz Mac OS X (10.4.5) 512mb ram, Superdrive; 5G 30gb iPod, 4GB White iPod nano

I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

Why will Bridge CC not recognize a PHP file and ONLY open with notepad instead of Dreamweaver?

why will Bridge CC not recognize a PHP file and ONLY open with notepad instead of Dreamweaver?

Did you set the file association in Bridge to open with Dreamweaver?

"Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application

"Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application. what should i do? help me.. =(
hopefully i can running my photoshop cs4 on Rosetta coz some plugin need rosetta to work. thanks..

xvolution_lp wrote:
macbook aluminium unibody mac snow leopard 10.6.4. i've already installed rosetta in my mac. i think this problem happen caused other software (CleanmyMac) . i've run the app and i think the app(cleanmymac) remove the universal binaries. what shoul i do?…
I'll assume that's a Mac-Intel machine, as I'm not familiar with macbooks or laptops in general. Obviously, if it were a PPC you would not need Rosetta in the first place.
Well, here's what I would do:
I'd re-install CS4 in the hopes that will solve the problem;
Second, I'd stop listening (and probably even speaking) to the misguided soul who recommended CleanmyMac to me;
Third, delete all traces of CleanmyMac; and
Fourth, I'd reinstall the OS and all applications on my machine.
But that's just me.
Wo Tai Lao Le
我太老了

ORA-39700: database must be opened with UPGRADE option

Dear buddies,
I just opened my database : startup upgrade and it started up.
But couldn't perform a backup.
Should I be running pupbld?
Could this problem be due to some opatch?
Here is a part of my alert log:
Thread 1 opened at log sequence 1050
Current log# 3 seq# 1050 mem# 0: D:\ORACLE\DATA\MIG\LOG_03.DBF
Successful open of redo thread 1
Wed Aug 11 13:35:15 2010
MTTR advisory is disabled because either FAST_START_IO_TARGET or LOG_CHECKPOINT_INTERVAL is set
Wed Aug 11 13:35:15 2010
SMON: enabling cache recovery
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\udump\mig_ora_1564.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Aug 11 13:35:16 2010
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_pmon_3088.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_reco_1868.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_psp0_2624.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_mman_3312.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_dbw0_2304.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_lgwr_552.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_ckpt_2300.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:17 2010
Errors in file d:\oracle\admin\mig\bdump\mig_smon_2136.trc:
ORA-00704: bootstrap process failure
Instance terminated by USER, pid = 1564
ORA-1092 signalled during: ALTER DATABASE OPEN...
Please comment.
Thanks.
Nith

I just opened my database : startup upgrade and it started up.
But couldn't perform a backup.As you said you have started the DB in upgrade mode and trying to take the backup of database. I think you can't take the backup of DB in upgrade mode.Please shut it down first and start up it in normal mode and do the backup.
Which backup strategy you are following?
What you exactly want to do upgrade the database or trying to take a bcakup?

Finding License details for dreamweaver 2004 education

I am trying to find details of my license for dreamweaver
2004...can't find it. It is an education version and I am wondering
if I can use it at home and at the school where I teach. Any help
is appreciated.

Can you use it on both computers at the same time if no? You
are good to go.
Dave
"dayarts" <[email protected]> wrote in
message
news:fpvm03$9dm$[email protected]..
> I am trying to find details of my license for
dreamweaver 2004...can't
find it.
> It is an education version and I am wondering if I can
use it at home and
at
> the school where I teach. Any help is appreciated.
>

Dreamweaver MX image "open with FW" option opens FWMX want to change this to FWMX2004

I hope the title made sense
I have the old Studio MX (FW, DW etc), and I also have a copy of fireworks 2004,
When i am using dreamweaver MX and want to edit an image on a site and i double click on the image it opens fireworks MX, i want it to open Fireworks MX 2004, now i can get it to open in Fireworks MX2004 by right clicking on the image and selecting "open with" and then navigating to the fireworks MX2004 folder to open it, which is a bit of a hassle,
Is there someway to get it to open in Fireworks MX 2004 when double clicking?
Obviously i can't afford to upgrade to the newer versions of either programs, (although i will accept donations ), and I would prefer to keep fireworks MX on the machine as back-up just in case mx2004 goes pear shaped.
Thanks in advance for any help.
Nigel

In Dreamweaver, go to Edit > Preferences > File Types / Editors and edit filetypes that you would like to be opened / edited with Fireworks MX 2004. There are a lot of options available there, and this should do the trick.
There's even an option to specify the path to Fireworks, like:
C:\Program Files\Adobe\Adobe Fireworks CS4\Fireworks.exe
-- just edit it to match where your copy of Fireworks MX 2004 is, and you're done -- I suppose that in your case, it should be here:
C:\Program Files\Macromedia\Fireworks\
...but I might be wrong -- it's been a long time since I installed anything older than Fireworks CS3...
Hope this helps!

Open with default options

Wondering if anyone knows how to set the default 'option' of the "Open
With" box to have this box UNchecked:
Always use the selected program to open this kind of file
By default in windows 7 this is checked. I have found docs online to
completely remove the checkbox or have it greyed out, but I would like
to have the option still there, just not checked by default.
We have had a couple different users somehow set all .exe's on their
computer to open with something like adobe..............sigh.
Stevo

Is this what you're looking for?
http://www.sevenforums.com/tutorials...unchecked.html
Looks like you have to download a registry file, but you can look at
that before installing it, to make sure there's nothing hinky in there.
Susan
Novell Community Chat Moderator
http://forums.novell.com/faq.php?faq=novfor#faq_rules
http://www.ncci.org NCCIrregulars Web Site
https://www.facebook.com/groups/NCCIrregulars
Please read the following before posting in here:
http://preview.tinyurl.com/27zopdy

Flash player plays wrong movie after opening with Rosetta

Hi,
I just had the most peculiar experience. Tried to open a [flashmovie].flv (which in hindsight could be done with Quicktime), Flash START popped up, followed by a pop-up requiring a Rosetta installation. This is the first time I came across Rosetta. Installed it, tried to open the flv again, this started the flashplayer alright but it started a completely different movie.
Opened the same file in Quicktime and that works fine.
Can anyone recommend what to do? Do I have to deinstall rosetta and the flashplayer to prevent this kind of behaviour?

Rosetta could come in handy for other apps you have hanging around, so I suggest you leave it where it is.
To make movies open in QuickTime, select one and press Command-I to open the Information window. In the Open With pane, select QuickTime Player from the pop-up menu. Then click on the Change All button below, and click on the Continue button in the "Are you sure" dialogue box that appears.
You can then throw away the Flash player, unless you prefer it and the developer comes up with a Cocoa/Intel version.
HTH
Archie

Compressor is not a finder "open with" recommended application for qt's

On my macbookpro If I select a quicktime file in the finder and go to the file:open with:recommended applications, compressor is not a choice. I can easily choose it as a nonrecommended application, but it's a bit of a pain. The same is true for a quicktime export from fcp (the first quicktime export option, not quicktime conversion) which has a fcp icon not a qt icon. On my G5 tower, qt files do have compressor as an option for open with, but fcp exports, do not.
Obviously I could change the "open with" option in the file info for either an individual file or all files of this type, but I just want compressor available in the "open with" list for either file type.
This ain't a deal breaker, just a minor annoyance.
Message was edited by: Michael Grenadier

What version of FCS/FCP, Michael?
If you're using FCP 5.x, the issue with QuickTime Movie exports from FCP is because those movies do not have an .mov extension. You can't drag them to the Compressor icon on the dock and force Compressor to open, for instance, like you can for anything else that actually has a .mov extension.
As far as opening QT movies with Compressor, mind explaining why you're doing this? That is, you're opening them in Compressor for previewing purposes, correct?

No "Open with Rosetta" option for Dreamweaver 2004 MX

Similar Messages

Maybe you are looking for