No OpenGL in AE with Nvidia FX 4800

Hi,
I have an Nvidia Quadro FX 4800 video card running under Windows 7 Pro.  It should support OpenGL in After Effects CS4. However, when I check to see if OpenGL is active in After Effects CS4, the OpenGL box is grayed-out and the message "No compatible OpenGL video card found"  is displayed.  Photoshop CS4 correctly recognized the card and is using its OpenGL capabilities as well as other apps I have that use OpenGL. See images.  Apparently, the problem is unique to AE.
To try to solve the issue, I have updated After Effects to the latest version and have updated the video card's bios and driver to the newest versions, but AE still does not recognize the card's OpenGL capabilities.  I have just started using AE, so I cannot comment on whether OpenGL ever worked in AE. 
Any suggestions on how to get AE to use the card would be appreciated.
David

Thanks to all who responded to my post.
I was able to get my video card to use OpenGL in AE by uninstalling all the Nvidia video drivers and related programs and reinstalling the newest version of the video driver.  See attachment.  This is after having Adobe's Tech Support close my tech support case saying my video card was not compatible with AE CS4: "David, we have checked and found that Nvidia Quadro FX 4800 video card is not supported by After Effects CS3. You can confirm the same from the following WebLink.
WebLink : http://www.adobe.com/products/aftereffects/opengl.html."
While it is true that my video cards is not on the list, the Adobe list is dated and has the older version of my video card on it.  Adobe needs to update their website, especially given the close relationship they seem to have with Nvidia.

Similar Messages

  • Xorg fails to restart with nvidia propertiary driver

    Hi!
    Dear fellow archers, I've got this little problem which is driving me crazy: after first successful start of xorg while booting  ("kdm" is in the DAEMONS list in rc.conf), i can't get to start it once again (for example with "/etc/rc.d/kdm restart"). When I try to do this screen goes blank (+ single underscore in top-left corner) for ~10 seconds, then nvidia logo shows up for half a second, and finally it failbacks to terminal.
    I use thinkpad T61 with nvidia quadro nvs 140m and nvidia driver version 190.42 (from extra repo).
    Thanks in advance for all suggestions.
    Xorg.0.log after I try to restart
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.7.3.901 (1.7.4 RC 1)
    Release Date: 2009-12-11
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.32-ARCH i686
    Current Operating System: Linux hal9000 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
    Kernel command line: root=/dev/sda2 ro vga=869
    Build Date: 12 December 2009 12:59:40PM
    Current version of pixman: 0.16.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 13 16:10:30 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x81e4c60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7
    (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 nVidia Corporation Quadro NVS 140M rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) "extmod" will be loaded by default.
    (II) "dbe" will be loaded by default.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 190.42 Tue Oct 20 20:55:08 PDT 2009
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 1.2.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:26:00 PDT 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules/libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "Coolbits" "1"
    (**) NVIDIA(0): Option "DPI" "96 x 96"
    (**) NVIDIA(0): Option "DamageEvents" "True"
    (**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
    (**) Dec 13 16:10:30 NVIDIA(0): Enabling RENDER acceleration
    (II) Dec 13 16:10:30 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) Dec 13 16:10:30 NVIDIA(0): enabled.
    (II) Dec 13 16:10:43 NVIDIA(0): NVIDIA GPU Quadro NVS 140M (G86) at PCI:1:0:0 (GPU-0)
    (--) Dec 13 16:10:43 NVIDIA(0): Memory: 524288 kBytes
    (--) Dec 13 16:10:43 NVIDIA(0): VideoBIOS: 60.86.3e.00.00
    (II) Dec 13 16:10:43 NVIDIA(0): Detected PCI Express Link width: 16X
    (--) Dec 13 16:10:43 NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) Dec 13 16:10:43 NVIDIA(0): Connected display device(s) on Quadro NVS 140M at PCI:1:0:0:
    (--) Dec 13 16:10:43 NVIDIA(0): BenQ FP91GP (CRT-0)
    (--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0)
    (--) Dec 13 16:10:43 NVIDIA(0): BenQ FP91GP (CRT-0): 400.0 MHz maximum pixel clock
    (--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0): 330.0 MHz maximum pixel clock
    (--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0): Internal Dual Link LVDS
    (WW) Dec 13 16:10:43 NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1440x900"
    (WW) Dec 13 16:10:43 NVIDIA(0): is specified in the EDID; however, the EDID's valid
    (WW) Dec 13 16:10:43 NVIDIA(0): HorizSync range (46.301-55.556 kHz) would exclude this
    (WW) Dec 13 16:10:43 NVIDIA(0): mode's HorizSync (37.0 kHz); ignoring HorizSync check for
    (WW) Dec 13 16:10:43 NVIDIA(0): mode "1440x900".
    (WW) Dec 13 16:10:43 NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1440x900"
    (WW) Dec 13 16:10:43 NVIDIA(0): is specified in the EDID; however, the EDID's valid
    (WW) Dec 13 16:10:43 NVIDIA(0): HorizSync range (46.301-55.556 kHz) would exclude this
    (WW) Dec 13 16:10:43 NVIDIA(0): mode's HorizSync (37.0 kHz); ignoring HorizSync check for
    (WW) Dec 13 16:10:43 NVIDIA(0): mode "1440x900".
    (II) Dec 13 16:10:43 NVIDIA(0): Assigned Display Device: DFP-0
    (II) Dec 13 16:10:43 NVIDIA(0): Validated modes:
    (II) Dec 13 16:10:43 NVIDIA(0): "1440x900"
    (II) Dec 13 16:10:43 NVIDIA(0): "1024x768"
    (II) Dec 13 16:10:43 NVIDIA(0): "800x600"
    (II) Dec 13 16:10:43 NVIDIA(0): "640x480"
    (II) Dec 13 16:10:43 NVIDIA(0): Virtual screen size determined to be 1440 x 900
    (**) Dec 13 16:10:44 NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    (==) Dec 13 16:10:44 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) Dec 13 16:10:44 NVIDIA(0): Initialized GPU GART.
    (II) Dec 13 16:10:44 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Dec 13 16:10:44 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (II) Dec 13 16:10:44 NVIDIA(0): Setting mode "1440x900"
    (II) Loading extension NV-GLX
    (II) Dec 13 16:10:45 NVIDIA(0): Initialized OpenGL Acceleration
    (==) NVIDIA(0): Disabling shared memory pixmaps
    (II) Dec 13 16:10:45 NVIDIA(0): Initialized X Rendering Acceleration
    (**) NVIDIA(0): Option "BackingStore" "True"
    (**) NVIDIA(0): Backing store enabled
    (==) NVIDIA(0): Silken mouse enabled
    (**) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (II) Loading extension XINERAMA
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    #InputDevice "Ultranav" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    #Section "ServerFlags"
    # Option "AutoAddDevices" "False"
    #EndSection
    #Section "Files"
    # RgbPath "/usr/share/X11/rgb"
    # ModulePath "/usr/lib/xorg/modules"
    # FontPath "/usr/share/fonts/misc"
    # FontPath "/usr/share/fonts/100dpi:unscaled"
    # FontPath "/usr/share/fonts/75dpi:unscaled"
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    #EndSection
    Section "Module"
    Load "glx"
    Load "dri"
    # Load "vbe"
    # Load "ddc"
    # Load "int10"
    # Load "dbe"
    # Load "extmod"
    #Load "record"
    # Load "freetype"
    #Load "type1"
    Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "thinkpad60"
    Option "XkbLayout" "pl"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "Auto"
    # Option "XAxisMapping" "6 7"
    # Option "YAxisMapping" "4 5"
    Option "ZAxisMapping" "4 5 6 7"
    # przewijanie srodkowym przyciskiem
    # Option "EmulateWheel" "On"
    # Option "Emulate3Buttons" "On"
    # Option "EmulateWheelButton" "2"
    ## Option "EmulateWheelTimeout" "200"
    EndSection
    #Section "InputDevice"
    # Identifier "Mouse0"
    # Driver "mouse"
    # Option "SHMConfig" "on"
    # Option "Protocol" "auto"
    # Option "Device" "/dev/input/mice"
    # Option "ZAxisMapping" "4 5 6 7"
    #EndSection
    Section "InputDevice"
    Identifier "Ultranav"
    Driver "synaptics"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.06"
    Option "MaxSpeed" "0.12"
    Option "AccelFactor" "0.0010"
    Option "SHMConfig" "on"
    # Option "Repeater" "/dev/ps2mouse"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Lenovo"
    ModelName "Lenovo T61 Flat Panel 1440x900"
    Option "DPMS"
    # DisplaySize 487 304 # 75 DPI @ 1440x900
    # DisplaySize 381 238 # 96 DPI @ 1440x900
    # HorizSync 28.0 - 61.0
    # VertRefresh 43.0 - 75.0
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "Quadro NVS 140M"
    Option "DPI" "96 x 96"
    Option "BackingStore" "True"
    Option "DamageEvents" "True"
    Option "DPMS" "True"
    Option "OnDemandVBlankInterrupts" "True"
    Option "Coolbits" "1"
    # Option "IgnoreDisplayDevices" "DFP, CRT, TV"
    # BusID "PCI:1:0:0"
    # Option "UseEdidDpi" "FALSE"
    # Option "AddARGBGLXVisuals" "True"
    # Option "AllowGLXWithComposite" "True"
    # Option "TripleBuffer" "True"
    # Option "DamageEvents" "True"
    # Option "BackingStore" "True"
    # Option "InitialPixmapPlacement" "3"
    # Option "GlyphCache" "1"
    # Option "PixmapCacheSize" "200000"
    # on battery - max power saving, on AC - adaptive strategy
    # Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x2233; PowerMizerDefault=0x3"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 1
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    #Section "Extensions"
    # Option "Composite" "Enable"
    #EndSection
    #Section "DRI"
    #Mode 0666
    #EndSection
    Last edited by tarantoga (2009-12-13 15:36:59)

    tarantoga wrote:
    falconindy wrote:
    I don't think the 190 driver is intended for the quadro M series. As per the nvidia site, the 100 or 169 drivers support your video card.
    edit: You might also try the nouveau driver.
    Well, this quadro is almost identical to geforce 8400GS, so I don't think nvidia site is up to date in this respect. Besides, other than this issue everything works just fine. It is just annoying to be forced to reboot everytime I have to restart X. And I need nvidia propertiary driver, because I use opencl.
    Thats odd then. I have an 8400gs and am using the beta driver without any issues. Give the legacy driver a try once.
    Exit the gui (ctrl+alt+f1)
    Remove the current driver
    pacman -Rd nvidia nvidia-utils
    (replace with nvidia-beta nvidia-utils-beta if you switched to the beta driver)
    Now install the legacy driver
    pacman -S nvidia-173xx nvidia-173xx-utils
    Reboot
    Hope this helps.

  • VGPU with Nvidia GRID and Hyper-V in a future Version of Windows Server Technical Preview possible?

    Hi Windows-Server Team!
    We've got 8 XenServers with NVidia GRID K2 cards in it and using it for our Citrix XenApp/XenDesktops Farms.
    Works very good. But we want to do it with Hyper-V.
    Is there a plan to do vGPU like XenServer with Hyper-V too?
    Thanks
    Thomas

    Hi Thomas,
    Windows Server Technical Preview adds support for OpenGL 1-4.4 and OpenCL 1.1.  You will need Windows 10 Enterprise Technical Preview for the guest VM and Server Technical Preview with Hyper-V installed on the physical host.
    What's New in Remote Desktop Services for the next version of Windows Server?
    http://blogs.msdn.com/b/rds/archive/2014/10/07/what-s-new-in-remote-desktop-services-for-the-next-version-of-windows-server.aspx
    -TP

  • Hello, i have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please??

    hello, i have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please??

    jasonf18090788 wrote:
    i saw in the site Adobe that the video card is compatible with AE and Pr, but not work.
    Where did you see that? It's not on the list for AE: System requirements | After Effects
    Keep in mind that After Effects only uses the GPU for one, obsolete thing. GPU matters very little for AE. See this: GPU (CUDA, OpenGL) features in After Effects CS6 and After Effects CC

  • Unable to Use Onboard Audio with Nvidia GPU since Linux 3.4

    I am currently stuck using linux 3.3.8-1 along with nvidia 295.49-1, because I don't know how to workaround the kernel disabling MSI for snd-hda-intel. This module is used by both the Nvidia HDMI audio and the ALC880 onboard audio. Previously, I have been able to disable HDMI audio to be able to use the onboard audio, but now I don't know what to do. I have attempted to use "options snd-hda-intel enable_msi=1" when modprobing on boot, which gets rid of the "hda_intel: Disabling MSI" message but it hasn't given me a working onboard audio output.
    I have also used the following command along with enable_msi=1 (found here: http://www.mjmwired.net/kernel/Document … HOWTO.txt) in my rc.local
    echo 1 > /sys/bus/pci/devices/0000\:00\:1b.0/msi_bus
    Of course, it is my assumption that the kernel disabling MSI is the cause of the problem, but it might be something else. Please let me know if any additional logs would be helpful.
    Linux 3.4.4-3, Nvidia 302.17-2  Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-3-ARCH (nobody@rampage) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Tue Jul 3 15:35:13 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb6f000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 37529000 - 377fd6a7
    [ 0.000000] Move RAMDISK from 000000003fb6f000 - 000000003fe436a6 to 37529000 - 377fd6a6
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c061ec40, node_mem_map f6d28200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d07000 s31424 r0 d21824 u53248
    [ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025576k/1046864k available (3810k kernel code, 20836k reserved, 1471k data, 524k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0629000 - 0xc06ac000 ( 524 kB)
    [ 0.000000] .data : 0xc04b88f7 - 0xc0628800 (1471 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04b88f7 (3810 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2999.992 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.98 BogoMIPS (lpj=9999973)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.007027] Initializing cgroup subsys cpuacct
    [ 0.007032] Initializing cgroup subsys memory
    [ 0.007043] Initializing cgroup subsys devices
    [ 0.007046] Initializing cgroup subsys freezer
    [ 0.007049] Initializing cgroup subsys net_cls
    [ 0.007052] Initializing cgroup subsys blkio
    [ 0.007102] CPU: Physical Processor ID: 0
    [ 0.007105] CPU: Processor Core ID: 0
    [ 0.007108] mce: CPU supports 4 MCE banks
    [ 0.007122] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007127] using mwait in idle threads.
    [ 0.010796] ACPI: Core revision 20120320
    [ 0.013347] ftrace: allocating 16930 entries in 34 pages
    [ 0.023410] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023795] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.058322] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.059996] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.059996] ... version: 0
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 18
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 0000007fffffffff
    [ 0.059996] ... fixed-purpose events: 0
    [ 0.059996] ... event mask: 000000000003ffff
    [ 0.076747] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.096685] CPU 1 irqstacks, hard=f64ae000 soft=f64b0000
    [ 0.096689] Booting Node 0, Processors #1 Ok.
    [ 0.009999] Initializing CPU#1
    [ 0.109847] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.109913] Brought up 2 CPUs
    [ 0.109918] Total of 2 processors activated (12004.96 BogoMIPS).
    [ 0.110087] devtmpfs: initialized
    [ 0.110253] PM: Registering ACPI NVS region [mem 0x3fe54000-0x3fee7fff] (606208 bytes)
    [ 0.111622] NET: Registered protocol family 16
    [ 0.111622] ACPI: bus type pci registered
    [ 0.111622] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.111622] PCI: not using MMCONFIG
    [ 0.112603] PCI: Using configuration type 1 for base access
    [ 0.116699] bio: create slab <bio-0> at 0
    [ 0.116741] ACPI: Added _OSI(Module Device)
    [ 0.116741] ACPI: Added _OSI(Processor Device)
    [ 0.116741] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.116741] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.117482] ACPI: EC: Look up EC in DSDT
    [ 0.119433] ACPI: Interpreter enabled
    [ 0.119446] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.119477] ACPI: Using IOAPIC for interrupt routing
    [ 0.119501] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.119654] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.119657] PCI: Using MMCONFIG for extended config space
    [ 0.121061] ACPI: No dock devices found.
    [ 0.121073] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.122518] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.125297] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.125302] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.125306] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.125310] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.125314] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.125317] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.125321] PCI: root bus 00: using default resources
    [ 0.125377] PCI host bridge to bus 0000:00
    [ 0.125382] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.125385] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.125400] pci 0000:00:00.0: [8086:2580] type 00 class 0x060000
    [ 0.125463] pci 0000:00:01.0: [8086:2581] type 01 class 0x060400
    [ 0.125521] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.125577] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
    [ 0.125597] pci 0000:00:1b.0: reg 10: [mem 0x53300000-0x53303fff 64bit]
    [ 0.125676] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.125704] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
    [ 0.125786] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.125815] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
    [ 0.125898] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.125928] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
    [ 0.126011] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.126040] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
    [ 0.126123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.126154] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
    [ 0.126201] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
    [ 0.126239] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
    [ 0.126285] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
    [ 0.126322] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
    [ 0.126368] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
    [ 0.126405] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
    [ 0.126451] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
    [ 0.126498] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
    [ 0.126521] pci 0000:00:1d.7: reg 10: [mem 0x53304000-0x533043ff]
    [ 0.126613] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.126638] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.126718] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100
    [ 0.126810] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    [ 0.126823] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
    [ 0.126850] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
    [ 0.126867] pci 0000:00:1f.1: reg 10: [io 0x40d8-0x40df]
    [ 0.126878] pci 0000:00:1f.1: reg 14: [io 0x40ec-0x40ef]
    [ 0.126889] pci 0000:00:1f.1: reg 18: [io 0x40d0-0x40d7]
    [ 0.126901] pci 0000:00:1f.1: reg 1c: [io 0x40e8-0x40eb]
    [ 0.126912] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf]
    [ 0.126954] pci 0000:00:1f.2: [8086:2651] type 00 class 0x01018f
    [ 0.126971] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
    [ 0.126981] pci 0000:00:1f.2: reg 14: [io 0x40e4-0x40e7]
    [ 0.126991] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
    [ 0.127002] pci 0000:00:1f.2: reg 1c: [io 0x40e0-0x40e3]
    [ 0.127012] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]
    [ 0.127053] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.127072] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
    [ 0.127129] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
    [ 0.127217] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
    [ 0.127232] pci 0000:01:00.0: reg 10: [mem 0x52000000-0x52ffffff]
    [ 0.127247] pci 0000:01:00.0: reg 14: [mem 0x40000000-0x4fffffff 64bit pref]
    [ 0.127261] pci 0000:01:00.0: reg 1c: [mem 0x50000000-0x51ffffff 64bit pref]
    [ 0.127271] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
    [ 0.127281] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 0.127352] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
    [ 0.127367] pci 0000:01:00.1: reg 10: [mem 0x53000000-0x53003fff]
    [ 0.136679] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.136685] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.136689] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.136695] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.136765] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
    [ 0.136788] pci 0000:02:00.0: reg 10: [io 0x2028-0x202f]
    [ 0.136804] pci 0000:02:00.0: reg 14: [io 0x2034-0x2037]
    [ 0.136819] pci 0000:02:00.0: reg 18: [io 0x2020-0x2027]
    [ 0.136836] pci 0000:02:00.0: reg 1c: [io 0x2030-0x2033]
    [ 0.136852] pci 0000:02:00.0: reg 20: [io 0x2000-0x201f]
    [ 0.136868] pci 0000:02:00.0: reg 24: [mem 0x53200000-0x532001ff]
    [ 0.136885] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.146676] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.146682] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.146687] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.146740] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.146747] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.146798] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.146805] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.146858] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.146866] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.146917] pci 0000:06:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.146938] pci 0000:06:05.0: reg 10: [mem 0x53101000-0x53101fff]
    [ 0.147024] pci 0000:06:05.0: supports D1 D2
    [ 0.147027] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.147053] pci 0000:06:08.0: [8086:1064] type 00 class 0x020000
    [ 0.147074] pci 0000:06:08.0: reg 10: [mem 0x53100000-0x53100fff]
    [ 0.147086] pci 0000:06:08.0: reg 14: [io 0x1000-0x103f]
    [ 0.147161] pci 0000:06:08.0: supports D1 D2
    [ 0.147164] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.147208] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
    [ 0.147214] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.147219] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.147227] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.147231] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.147260] pci_bus 0000:00: on NUMA node 0
    [ 0.147266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.147465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    [ 0.147735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 0.147802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    [ 0.147870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    [ 0.147936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    [ 0.148039] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.148044] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.148047] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.152485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152581] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.152676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153045] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.153367] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.153374] vgaarb: loaded
    [ 0.153377] vgaarb: bridge control possible 0000:01:00.0
    [ 0.153377] PCI: Using ACPI for IRQ routing
    [ 0.160505] PCI: pci_cache_line_size set to 64 bytes
    [ 0.160612] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.160616] reserve RAM buffer: 000000003fe54000 - 000000003fffffff
    [ 0.160771] NetLabel: Initializing
    [ 0.160775] NetLabel: domain hash size = 128
    [ 0.160777] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.160799] NetLabel: unlabeled traffic allowed by default
    [ 0.160906] hpet clockevent registered
    [ 0.160911] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.160917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.160924] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.173350] Switching to clocksource hpet
    [ 0.182676] pnp: PnP ACPI init
    [ 0.182706] ACPI: bus type pnp registered
    [ 0.184200] pnp 00:00: [bus 00-ff]
    [ 0.184205] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.184209] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.184212] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.184216] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.184219] pnp 00:00: [mem 0x000c0000-0x000fffff window]
    [ 0.184223] pnp 00:00: [mem 0xf0000000-0xfbffffff window]
    [ 0.184229] pnp 00:00: [mem 0x40000000-0xe0000000 window]
    [ 0.184297] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.184317] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.184321] pnp 00:01: [mem 0xfed13000-0xfed13fff]
    [ 0.184324] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.184327] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.184330] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.184333] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.184336] pnp 00:01: [mem 0xfed20000-0xfed9ffff]
    [ 0.184412] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.184417] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.184421] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.184425] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.184429] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.184432] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.184436] system 00:01: [mem 0xfed20000-0xfed9ffff] has been reserved
    [ 0.184442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.184642] pnp 00:02: [io 0x0000-0x000f]
    [ 0.184646] pnp 00:02: [io 0x0081-0x0083]
    [ 0.184649] pnp 00:02: [io 0x0087]
    [ 0.184652] pnp 00:02: [io 0x0089-0x008b]
    [ 0.184655] pnp 00:02: [io 0x008f]
    [ 0.184658] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.184661] pnp 00:02: [dma 4]
    [ 0.184706] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.184723] pnp 00:03: [io 0x0070-0x0071]
    [ 0.184726] pnp 00:03: [io 0x0074-0x0077]
    [ 0.184740] pnp 00:03: [irq 8]
    [ 0.184783] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.184802] pnp 00:04: [io 0x00f0]
    [ 0.184810] pnp 00:04: [irq 13]
    [ 0.184854] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.184871] pnp 00:05: [io 0x0061]
    [ 0.184919] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.184938] pnp 00:06: [io 0x0500-0x053f]
    [ 0.184942] pnp 00:06: [io 0x0400-0x047f]
    [ 0.184945] pnp 00:06: [io 0x0092]
    [ 0.184948] pnp 00:06: [io 0x0680-0x06ff]
    [ 0.184951] pnp 00:06: [io 0x0010-0x001f]
    [ 0.184954] pnp 00:06: [io 0x0072-0x0073]
    [ 0.184956] pnp 00:06: [io 0x0080]
    [ 0.184959] pnp 00:06: [io 0x0084-0x0086]
    [ 0.184962] pnp 00:06: [io 0x0088]
    [ 0.184965] pnp 00:06: [io 0x008c-0x008e]
    [ 0.184968] pnp 00:06: [io 0x0090-0x009f]
    [ 0.185047] system 00:06: [io 0x0500-0x053f] has been reserved
    [ 0.185051] system 00:06: [io 0x0400-0x047f] has been reserved
    [ 0.185055] system 00:06: [io 0x0680-0x06ff] has been reserved
    [ 0.185061] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.185320] pnp 00:07: [io 0x0378-0x037f]
    [ 0.185329] pnp 00:07: [irq 7]
    [ 0.185426] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.185514] pnp 00:08: [irq 12]
    [ 0.185563] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [ 0.185600] pnp 00:09: [io 0x0060]
    [ 0.185604] pnp 00:09: [io 0x0064]
    [ 0.185611] pnp 00:09: [irq 1]
    [ 0.185661] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.185822] pnp 00:0a: [io 0x03f8-0x03ff]
    [ 0.185831] pnp 00:0a: [irq 4]
    [ 0.185938] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.185964] pnp 00:0b: [mem 0xfec00000-0xfec000ff]
    [ 0.186015] pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.186047] pnp: PnP ACPI: found 12 devices
    [ 0.186049] ACPI: ACPI bus type pnp unregistered
    [ 0.224576] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.224583] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.224623] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02-02] add_size 200000
    [ 0.224635] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
    [ 0.224640] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
    [ 0.224651] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
    [ 0.224656] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
    [ 0.224667] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
    [ 0.224672] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
    [ 0.224692] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.224696] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224701] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224705] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224709] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224713] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224717] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224726] pci 0000:00:1c.0: BAR 15: assigned [mem 0x53700000-0x539fffff pref]
    [ 0.224731] pci 0000:00:1c.1: BAR 15: assigned [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224736] pci 0000:00:1c.2: BAR 15: assigned [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224740] pci 0000:00:1c.3: BAR 15: assigned [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224745] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.224750] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.224754] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.224761] pci 0000:01:00.0: BAR 6: assigned [mem 0x53080000-0x530fffff pref]
    [ 0.224765] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.224770] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.224775] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.224780] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.224788] pci 0000:02:00.0: BAR 6: assigned [mem 0x53700000-0x5370ffff pref]
    [ 0.224791] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.224796] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.224802] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.224807] pci 0000:00:1c.0: bridge window [mem 0x53700000-0x539fffff pref]
    [ 0.224815] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.224819] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.224825] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.224831] pci 0000:00:1c.1: bridge window [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224838] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.224842] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
    [ 0.224849] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.224854] pci 0000:00:1c.2: bridge window [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224861] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.224865] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
    [ 0.224872] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.224877] pci 0000:00:1c.3: bridge window [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224885] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
    [ 0.224889] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.224895] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.224959] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.224966] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.224969] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.224974] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.224977] pci_bus 0000:01: resource 1 [mem 0x52000000-0x530fffff]
    [ 0.224980] pci_bus 0000:01: resource 2 [mem 0x40000000-0x51ffffff pref]
    [ 0.224984] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.224987] pci_bus 0000:02: resource 1 [mem 0x53200000-0x532fffff]
    [ 0.224990] pci_bus 0000:02: resource 2 [mem 0x53700000-0x539fffff pref]
    [ 0.224994] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.224997] pci_bus 0000:03: resource 1 [mem 0x53400000-0x534fffff]
    [ 0.225001] pci_bus 0000:03: resource 2 [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.225004] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
    [ 0.225007] pci_bus 0000:04: resource 1 [mem 0x53500000-0x535fffff]
    [ 0.225011] pci_bus 0000:04: resource 2 [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.225014] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
    [ 0.225018] pci_bus 0000:05: resource 1 [mem 0x53600000-0x536fffff]
    [ 0.225021] pci_bus 0000:05: resource 2 [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.225025] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
    [ 0.225028] pci_bus 0000:06: resource 1 [mem 0x53100000-0x531fffff]
    [ 0.225031] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
    [ 0.225035] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.225091] NET: Registered protocol family 2
    [ 0.225171] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.225391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.225895] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.226187] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.226190] TCP: reno registered
    [ 0.226195] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226208] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226329] NET: Registered protocol family 1
    [ 0.226637] pci 0000:01:00.0: Boot video device
    [ 0.226698] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
    [ 0.226709] PCI: CLS 0 bytes, default 64
    [ 0.226780] Unpacking initramfs...
    [ 0.315303] Freeing initrd memory: 2900k freed
    [ 0.317191] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [ 0.317195] apm: disabled - APM is not SMP safe.
    [ 0.317515] audit: initializing netlink socket (disabled)
    [ 0.317533] type=2000 audit(1342552654.316:1): initialized
    [ 0.317976] highmem bounce pool size: 64 pages
    [ 0.317984] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.320723] VFS: Disk quotas dquot_6.5.2
    [ 0.320797] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.320931] msgmni has been set to 1740
    [ 0.321235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.321282] io scheduler noop registered
    [ 0.321287] io scheduler deadline registered
    [ 0.321299] io scheduler cfq registered (default)
    [ 0.321473] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.321588] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.321708] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.321830] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.321950] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
    [ 0.322243] GHES: HEST is not enabled!
    [ 0.322264] isapnp: Scanning for PnP cards...
    [ 0.678327] isapnp: No Plug & Play device found
    [ 0.678412] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.698985] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720023] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720384] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.723503] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.723558] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.723755] mousedev: PS/2 mouse device common for all mice
    [ 0.723869] rtc_cmos 00:03: RTC can wake from S4
    [ 0.724031] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.724060] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 0.724098] cpuidle: using governor ladder
    [ 0.724101] cpuidle: using governor menu
    [ 0.724316] TCP: cubic registered
    [ 0.724489] NET: Registered protocol family 10
    [ 0.724741] NET: Registered protocol family 17
    [ 0.724748] Registering the dns_resolver key type
    [ 0.724796] Using IPI No-Shortcut mode
    [ 0.724971] PM: Hibernation image not present or could not be loaded.
    [ 0.724985] registered taskstats version 1
    [ 0.725540] rtc_cmos 00:03: setting system clock to 2012-07-17 19:17:35 UTC (1342552655)
    [ 0.725588] Initializing network drop monitor service
    [ 0.726860] Freeing unused kernel memory: 524k freed
    [ 0.727195] Write protecting the kernel text: 3812k
    [ 0.727226] Write protecting the kernel read-only data: 1120k
    [ 0.740567] systemd-udevd[41]: starting version 186
    [ 0.742721] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.745749] SCSI subsystem initialized
    [ 0.749328] libata version 3.00 loaded.
    [ 0.750857] ahci 0000:02:00.0: version 3.0
    [ 0.750961] ahci 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 0.751021] ahci: SSS flag set, parallel bus scan disabled
    [ 0.751069] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 0.751077] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
    [ 0.752850] scsi0 : ahci
    [ 0.753200] scsi1 : ahci
    [ 0.753383] ata1: SATA max UDMA/133 abar m512@0x53200000 port 0x53200100 irq 45
    [ 0.753391] ata2: SATA max UDMA/133 abar m512@0x53200000 port 0x53200180 irq 45
    [ 1.240043] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.252105] ata1.00: ATA-8: OCZ-SOLID3, 2.15, max UDMA/133
    [ 1.252110] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.262069] ata1.00: configured for UDMA/133
    [ 1.262262] scsi 0:0:0:0: Direct-Access ATA OCZ-SOLID3 2.15 PQ: 0 ANSI: 5
    [ 1.264029] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.264196] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.264203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.264257] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.265654] sda: sda1 sda2 sda3 sda4
    [ 1.266383] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.320034] Refined TSC clocksource calibration: 2999.980 MHz.
    [ 1.320041] Switching to clocksource tsc
    [ 1.746702] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.747318] ata2.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
    [ 1.747323] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.747889] ata2.00: configured for UDMA/133
    [ 1.748030] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
    [ 1.748540] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
    [ 1.748547] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.748667] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.748674] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.748725] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.793835] sdb: sdb1
    [ 1.794347] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.892420] usbcore: registered new interface driver usbfs
    [ 1.892471] usbcore: registered new interface driver hub
    [ 1.895559] ata_piix 0000:00:1f.1: version 2.13
    [ 1.895639] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.897473] usbcore: registered new device driver usb
    [ 1.898382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.898429] scsi2 : ata_piix
    [ 1.899754] scsi3 : ata_piix
    [ 1.900600] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
    [ 1.900605] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
    [ 1.900676] ata4: port disabled--ignoring
    [ 1.901417] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 1.901473] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.904508] scsi4 : ata_piix
    [ 1.905087] scsi5 : ata_piix
    [ 1.905220] ata5: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
    [ 1.905227] ata6: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
    [ 1.905347] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.905355] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.905401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 1.905444] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.905558] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.909355] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.909393] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x53304000
    [ 1.916865] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.917873] hub 1-0:1.0: USB hub found
    [ 1.917883] hub 1-0:1.0: 8 ports detected
    [ 1.918079] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.918087] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.918109] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.918149] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
    [ 1.918445] hub 2-0:1.0: USB hub found
    [ 1.918456] hub 2-0:1.0: 2 ports detected
    [ 1.918663] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.918671] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.918692] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 1.918728] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
    [ 1.919043] hub 3-0:1.0: USB hub found
    [ 1.919053] hub 3-0:1.0: 2 ports detected
    [ 1.919306] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.919314] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.919338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 1.919391] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
    [ 1.919771] hub 4-0:1.0: USB hub found
    [ 1.919781] hub 4-0:1.0: 2 ports detected
    [ 1.920058] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 1.920066] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 1.920085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 1.920162] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
    [ 1.920720] hub 5-0:1.0: USB hub found
    [ 1.920731] hub 5-0:1.0: 2 ports detected
    [ 2.068266] ata6.00: ATA-6: WDC WD2000JD-00HBB0, 08.02D08, max UDMA/133
    [ 2.068272] ata6.00: 390721968 sectors, multi 16: LBA48
    [ 2.074099] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
    [ 2.074104] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.081454] ata6.00: configured for UDMA/133
    [ 2.100167] ata5.01: ATA-8: ST3500418AS, CC34, max UDMA/133
    [ 2.100172] ata5.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.107102] ata5.00: configured for UDMA/133
    [ 2.162850] ata5.01: configured for UDMA/133
    [ 2.173642] ata3.00: ATAPI: SONY DVD RW DRU-530A, 2.1g, max UDMA/33
    [ 2.173649] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BGS4, max UDMA/66
    [ 2.173654] ata3.01: limited to UDMA/33 due to 40-wire cable
    [ 2.186862] ata3.00: configured for UDMA/33
    [ 2.200194] ata3.01: configured for UDMA/33
    [ 2.201725] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-530A 2.1g PQ: 0 ANSI: 5
    [ 2.202839] scsi 2:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1633S BGS4 PQ: 0 ANSI: 5
    [ 2.203271] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
    [ 2.203548] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 2.203557] sd 4:0:0:0: [sdc] 4096-byte physical blocks
    [ 2.203683] sd 4:0:0:0: [sdc] Write Protect is off
    [ 2.203690] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.203749] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.203803] scsi 4:0:1:0: Direct-Access ATA ST3500418AS CC34 PQ: 0 ANSI: 5
    [ 2.204553] scsi 5:0:0:0: Direct-Access ATA WDC WD2000JD-00H 08.0 PQ: 0 ANSI: 5
    [ 2.204737] sd 4:0:1:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.204849] sd 5:0:0:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB)
    [ 2.204969] sd 5:0:0:0: [sde] Write Protect is off
    [ 2.204976] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
    [ 2.205029] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.223374] usb 1-2: new high-speed USB device number 2 using ehci_hcd
    [ 2.225847] sdc: sdc1
    [ 2.225864] sd 4:0:1:0: [sdd] Write Protect is off
    [ 2.225872] sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
    [ 2.225944] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.226606] sd 4:0:0:0: [sdc] Attached SCSI disk
    [ 2.242524] sdd: sdd1
    [ 2.243011] sd 4:0:1:0: [sdd] Attached SCSI disk
    [ 2.250598] sde: sde2 sde3 < sde5 sde6 >
    [ 2.251325] sd 5:0:0:0: [sde] Attached SCSI disk
    [ 2.263852] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [ 2.263860] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.265692] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 2.269125] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 2.270115] sr 2:0:1:0: Attached scsi CD-ROM sr1
    [ 2.453377] usb 1-3: new high-speed USB device number 3 using ehci_hcd
    [ 2.630176] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input1
    [ 2.630296] generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
    [ 2.630361] usbcore: registered new interface driver usbhid
    [ 2.630366] usbhid: USB HID core driver
    [ 2.720033] usb 1-5: new high-speed USB device number 4 using ehci_hcd
    [ 2.992001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.123459] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [ 3.170371] systemd[1]: systemd 186 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
    [ 3.189960] systemd[1]: Inserted module 'autofs4'
    [ 3.190421] systemd[1]: Set hostname to <bbq>.
    [ 3.347408] systemd[1]: Cannot add dependency job for unit exportfs.service, ignoring: Unit exportfs.service failed to load: No such file or directory. See system logs and 'systemctl status exportfs.service' for details.
    [ 3.347444] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory. See system logs and 'systemctl status arch-daemons.target' for details.
    [ 3.347509] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 3.600924] systemd-readahead[134]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
    [ 3.890242] systemd-udevd[139]: starting version 186
    [ 3.928976] systemd-journald[146]: Fixed max_use=50.2M max_size=6.2M min_size=64.0K keep_free=25.1M
    [ 3.929449] systemd-journald[146]: Vacuuming...
    [ 4.016020] FS-Cache: Loaded
    [ 4.026904] RPC: Registered named UNIX socket transport module.
    [ 4.026909] RPC: Registered udp transport module.
    [ 4.026912] RPC: Registered tcp transport module.
    [ 4.026914] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 4.068138] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 4.071885] NFS: Registering the id_resolver key type
    [ 4.071920] FS-Cache: Netfs 'nfs' registered for caching
    [ 4.090493] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.103300] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 4.106821] ACPI: Sleep Button [SLPB]
    [ 4.114494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.114509] ACPI: Power Button [PWRF]
    [ 4.135074] parport_pc 00:07: reported by Plug and Play ACPI
    [ 4.135106] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 4.157067] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 4.178255] Linux agpgart interface v0.103
    [ 4.202375] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 4.203197] hda_intel: Disabling MSI
    [ 4.255263] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.255267] intel_rng: don't want to disable this in firmware setup, and if
    [ 4.255271] intel_rng: you are certain that your system has a functional
    [ 4.255274] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [ 4.273750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [ 4.273757] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 4.274079] iTCO_vendor_support: vendor-support=0
    [ 4.285411] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 4.285661] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
    [ 4.285769] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.380102] usbcore: registered new interface driver uas
    [ 4.415911] Initializing USB Mass Storage driver...
    [ 4.423630] scsi6 : usb-storage 1-3:1.0
    [ 4.423883] usbcore: registered new interface driver usb-storage
    [ 4.423888] USB Mass Storage support registered.
    [ 4.426642] e100 0000:06:08.0: eth0: addr 0x53100000, irq 20, MAC addr 00:11:11:9d:19:91
    [ 4.434273] scsi7 : usb-storage 1-5:1.0
    [ 4.434499] usbcore: registered new interface driver ums-cypress
    [ 4.475410] psmouse serio1: hgpk: ID: 10 00 64
    [ 4.480175] firewire_ohci 0000:06:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 4.487522] microcode: CPU0 sig=0xf41, pf=0x10, revision=0xd
    [ 4.506728] Registered IR keymap rc-ati-x10
    [ 4.507019] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0/input5
    [ 4.507357] rc0: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0
    [ 4.507587] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input6
    [ 4.507783] usbcore: registered new interface driver ati_remote
    [ 4.530507] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 127
    [ 4.687581] ppdev: user-space parallel port driver
    [ 4.761362] Adding 1047928k swap on /dev/sda2. Priority:-1 extents:1 across:1047928k SS
    [ 4.804984] microcode: CPU1 sig=0xf41, pf=0x10, revision=0xd
    [ 4.814875] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.814882] Disabling lock debugging due to kernel taint
    [ 4.822000] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.926478] fuse init (API version 7.18)
    [ 4.970217] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
    [ 4.971016] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.971676] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.971943] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.980870] firewire_core 0000:06:05.0: created device fw0: GUID 00111100009d1991, S400
    [ 4.981627] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 4.982035] NVRM: loading NVIDIA UNIX x86 Kernel Module 302.17 Tue Jun 12 18:37:51 PDT 2012
    [ 5.031213] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input11
    [ 5.432483] scsi 6:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
    [ 5.436924] sd 6:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 5.437226] scsi 7:0:0:0: Direct-Access WDC WD25 00JB-00GVA0 PQ: 0 ANSI: 0
    [ 5.438100] sd 7:0:0:0: [sdg] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 5.439101] sd 7:0:0:0: [sdg] Write Protect is off
    [ 5.439109] sd 7:0:0:0: [sdg] Mode Sense: 33 00 00 00
    [ 5.439482] sd 6:0:0:0: [sdf] Write Protect is off
    [ 5.439489] sd 6:0:0:0: [sdf] Mode Sense: 10 00 00 00
    [ 5.440101] sd 7:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.442224] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.463763] sdg: sdg1 sdg2
    [ 5.467100] sd 7:0:0:0: [sdg] Attached SCSI disk
    [ 5.469267] sdf: sdf1
    [ 5.491846] sd 6:0:0:0: [sdf] Attached SCSI disk
    [ 36.480046] usb 1-5: reset high-speed USB device number 4 using ehci_hcd
    [ 37.347138] systemd-journald[146]: Fixed max_use=1.4G max_size=128.0M min_size=64.0K keep_free=765.3M
    [ 37.347165] systemd-journald[146]: Flushing to /var...
    [ 37.837240] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
    [ 37.906826] EXT4-fs (sdg2): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.068461] EXT4-fs (sde6): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.194403] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.740678] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.747081] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
    [ 39.486016] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 39.599796] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 39.600119] NFSD: starting 90-second grace period
    [ 40.579508] Netfilter messages via NETLINK v0.30.
    [ 40.594917] nf_conntrack version 0.5.0 (16078 buckets, 64312 max)
    [ 40.746099] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [ 40.747318] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
    [ 40.747325] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
    [ 40.786415] ctnetlink v0.93: registering with nfnetlink.
    [ 40.886321] ip_set: protocol 6
    [ 40.898284] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
    [ 41.762042] xt_time: kernel timezone is -0000
    [ 42.318176] Bridge firewalling registered
    [ 42.704278] u32 classifier
    [ 42.704284] input device check on
    [ 42.704287] Actions configured
    [ 43.154527] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 43.156826] e100 0000:06:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
    [ 43.157214] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 44.557798] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 44.872612] [drm] Initialized drm 1.1.0 20060810
    [ 44.881629] wmi: Mapper loaded
    [ 51.096207] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.105163] zram: Unknown parameter `zram_num_devices'
    [ 51.148183] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.148690] zram: Creating 2 devices ...
    [ 51.398897] Adding 514496k swap on /dev/zram0. Priority:100 extents:1 across:514496k SS
    [ 51.406500] Adding 514496k swap on /dev/zram1. Priority:100 extents:1 across:514496k SS
    [ 76.005728] bootchart-collector started as pid 1586 with 2 args: '--dump' '/tmp/bootchart.94K3Fb6yom'
    [ 76.005734] Extracting profile data from pid 178
    [ 76.005736] map 0xbfe14000 -> 0xbfe35000 size: 132k from 'bfe14000' 'bfe35000'
    [ 76.005739] read 135168 bytes of 135168
    [ 76.005741] reading 101 chunks (of 101) ... wrote 12527 kb
    [ 76.005743] bootchart-collector pid: 1586 unmounted proc / clean exit
    Linux 3.3.8-1, Nvidia 295.49-1 Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 13:24:07 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb70000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 3752a000 - 377fd833
    [ 0.000000] Move RAMDISK from 000000003fb70000 - 000000003fe43832 to 3752a000 - 377fd832
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6d29200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d08000 s30848 r0 d22400 u53248
    [ 0.000000] pcpu-alloc: s30848 r0 d22400 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025660k/1046864k available (3774k kernel code, 20752k reserved, 1434k data, 520k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
    [ 0.000000] .data : 0xc04af9a9 - 0xc0616400 (1434 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04af9a9 (3774 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3000.097 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.20 BogoMIPS (lpj=10000323)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.006921] Initializing cgroup subsys cpuacct
    [ 0.006925] Initializing cgroup subsys memory
    [ 0.006936] Initializing cgroup subsys devices
    [ 0.006939] Initializing cgroup subsys freezer
    [ 0.006942] Initializing cgroup subsys net_cls
    [ 0.006945] Initializing cgroup subsys blkio
    [ 0.006989] CPU: Physical Processor ID: 0
    [ 0.006992] CPU: Processor Core ID: 0
    [ 0.006995] mce: CPU supports 4 MCE banks
    [ 0.007009] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007014] using mwait in idle threads.
    [ 0.010636] ACPI: Core revision 20120111
    [ 0.013347] ftrace: allocating 16622 entries in 33 pages
    [ 0.020077] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054563] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.056663] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.056663] ... version: 0
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 18
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 0000007fffffffff
    [ 0.056663] ... fixed-purpose events: 0
    [ 0.056663] ... event mask: 000000000003ffff
    [ 0.073415] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100018] CPU 1 irqstacks, hard=f64a4000 soft=f64a6000
    [ 0.100021] Booting Node 0, Processors #1 Ok.
    [ 0.100025] smpboot cpu 1: start_ip = 9a000
    [ 0.009999] Initializing CPU#1
    [ 0.113372] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.120000] Brought up 2 CPUs
    [ 0.120006] Total of 2 processors activated (12005.40 BogoMIPS).
    [ 0.120978] devtmpfs: initialized
    [ 0.120978] PM: Registering ACPI NVS region at 3fe54000 (606208 bytes)
    [ 0.120978] NET: Registered protocol family 16
    [ 0.120978] ACPI: bus type pci registered
    [ 0.120978] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.120978] PCI: not using MMCONFIG
    [ 0.123293] PCI: Using configuration type 1 for base access
    [ 0.126717] bio: create slab <bio-0> at 0
    [ 0.126739] ACPI: Added _OSI(Module Device)
    [ 0.126739] ACPI: Added _OSI(Processor Device)
    [ 0.126739] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.126739] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.127496] ACPI: EC: Look up EC in DSDT
    [ 0.127496] ACPI: Interpreter enabled
    [ 0.127496] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.127496] ACPI: Using IOAPIC for interrupt routing
    [ 0.127496] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.127496] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.127496] PCI: Using MMCONFIG for extended config space
    [ 0.131872] ACPI: No dock devices found.
    [ 0.131883] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.133334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136111] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.136116] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.136120] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.136123] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.136127] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.136131] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.136134] PCI: root bus 00: using default resources
    [ 0.136196] PCI host bridge to bus 0000:00
    [ 0.136201] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.136206] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.136220] pci 0000:00:00.0: [8086:2580] type 0 class 0x000600
    [ 0.136283] pci 0000:00:01.0: [8086:2581] type 1 class 0x000604
    [ 0.136340] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.13639

    And here is the output of alsa-info.sh which I have also added to the original post:
    upload=true&script=true&cardinfo=
    !!ALSA Information Script v 0.4.61
    !!Script ran on: Wed Jul 18 00:10:56 UTC 2012
    !!Linux Distribution
    Arch Linux \r (\l) DISTRIB_ID=archlinux DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="http://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
    !!DMI Information
    Manufacturer:
    Product Name: 507GR
    Product Version:
    Firmware Version: AG91510J.15A.0816.2005.0214.1818
    !!Kernel Information
    Kernel release: 3.4.4-3-ARCH
    Operating System: GNU/Linux
    Architecture: i686
    Processor: unknown
    SMP Enabled: Yes
    !!ALSA Version
    Driver version: 1.0.25
    Library version: 1.0.25
    Utilities version: 1.0.25
    !!Loaded ALSA modules
    snd_hda_intel
    snd_hda_intel
    !!Sound Servers on this system
    Jack:
    Installed - Yes (/usr/bin/jackd)
    Running - No
    !!Soundcards recognised by ALSA
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0x53300000 irq 46
    1 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0x53000000 irq 17
    !!PCI Soundcards installed in the system
    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
    01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
    !!Advanced information - PCI Vendor/Device/Subsystem ID's
    00:1b.0 0403: 8086:2668 (rev 03)
    Subsystem: 107b:4037
    01:00.1 0403: 10de:0be3 (rev a1)
    Subsystem: 1043:8354
    !!Loaded sound module options
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!HDA-Intel Codec information
    --startcollapse--
    Codec: Realtek ALC880
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10ec0880
    Subsystem Id: 0x08600000
    Revision Id: 0x90000
    No Modem Function Group found
    Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
    IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    Node 0x02 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x03 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x04 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x05 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Node 0x07 [Vendor Defined Widget] wcaps 0xf0051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals:
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 0
    Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 7
    0x18 0x19 0x1a* 0x1b 0x1c 0x14 0x15
    Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 10
    0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
    Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
    Converter: stream=0, channel=0
    SDI-Select: 0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x1f
    Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
    Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
    Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0xa3 0xa3] [0x80 0x80] [0x80 0x80]
    Connection: 8
    0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
    Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x02 0x0b
    Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x03 0x0b
    Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x04 0x0b
    Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x05 0x0b
    Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0c
    Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0d
    Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0e
    Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x10
    Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x11
    Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Control: name="Line Jack", index=0, device=0
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x01810000: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x12
    Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x13
    Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
    Pincap 0x00000020: IN
    Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1d [Pin Complex] wcaps 0x400000: Mono
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
    Pincap 0x00000010: OUT
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Connection: 1
    0x06
    Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
    Processing caps: benign=0, ncoeff=10
    Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
    Volume-Knob: delta=0, steps=64, direct=0, val=0
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 0
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=0, device=0
    Control: name="IEC958 Playback Pro Mask", index=0, device=0
    Control: name="IEC958 Playback Default", index=0, device=0
    Control: name="IEC958 Playback Switch", index=0, device=0
    Control: name="ELD", index=0, device=3
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 1
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=1, device=0
    Control: name="IEC958 Playback Pro Mask", index=1, device=0
    Control: name="IEC958 Playback Default", index=1, device=0
    Control: name="IEC958 Playback Switch", index=1, device=0
    Control: name="ELD", index=0, device=7
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=2, device=0
    Control: name="IEC958 Playback Pro Mask", index=2, device=0
    Control: name="IEC958 Playback Default", index=2, device=0
    Control: name="IEC958 Playback Switch", index=2, device=0
    Control: name="ELD", index=0, device=8
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 3
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=9 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=3, device=0
    Control: name="IEC958 Playback Pro Mask", index=3, device=0
    Control: name="IEC958 Playback Default", index=3, device=0
    Control: name="IEC958 Playback Switch", index=3, device=0
    Control: name="ELD", index=0, device=9
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    --endcollapse--
    !!ALSA Device nodes
    crw-rw----+ 1 root audio 116, 3 Jul 17 17:07 /dev/snd/controlC0
    crw-rw----+ 1 root audio 116, 12 Jul 17 17:07 /dev/snd/controlC1
    crw-rw----+ 1 root audio 116, 2 Jul 17 17:07 /dev/snd/hwC0D2
    crw-rw----+ 1 root audio 116, 11 Jul 17 17:07 /dev/snd/hwC1D0
    crw-rw----+ 1 root audio 116, 10 Jul 17 17:07 /dev/snd/hwC1D1
    crw-rw----+ 1 root audio 116, 9 Jul 17 17:07 /dev/snd/hwC1D2
    crw-rw----+ 1 root audio 116, 8 Jul 17 17:07 /dev/snd/hwC1D3
    crw-rw----+ 1 root audio 116, 7 Jul 17 17:07 /dev/snd/pcmC1D3p
    crw-rw----+ 1 root audio 116, 6 Jul 17 17:07 /dev/snd/pcmC1D7p
    crw-rw----+ 1 root audio 116, 5 Jul 17 17:07 /dev/snd/pcmC1D8p
    crw-rw----+ 1 root audio 116, 4 Jul 17 17:07 /dev/snd/pcmC1D9p
    crw-rw---- 1 root audio 116, 1 Jul 17 17:07 /dev/snd/seq
    crw-rw----+ 1 root audio 116, 33 Jul 17 17:07 /dev/snd/timer
    /dev/snd/by-path:
    total 0
    drwxr-xr-x 2 root root 80 Jul 17 17:07 .
    drwxr-xr-x 3 root root 320 Jul 17 17:07 ..
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:00:1b.0 -> ../controlC0
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:01:00.1 -> ../controlC1
    !!Aplay/Arecord output
    APLAY
    **** List of PLAYBACK Hardware Devices ****
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ARECORD
    **** List of CAPTURE Hardware Devices ****
    !!Amixer output
    !!-------Mixer controls for card 0 [Intel]
    Card hw:0 'Intel'/'HDA Intel at 0x53300000 irq 46'
    Mixer name : 'Realtek ALC880'
    Components : 'HDA:10ec0880,08600000,00090000'
    Controls : 4
    Simple ctrls : 2
    Simple mixer control 'PCM',0
    Capabilities: pvolume penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 65
    Mono:
    Front Left: Playback 35 [54%] [0.00dB] [off]
    Front Right: Playback 35 [54%] [0.00dB] [off]
    !!-------Mixer controls for card 1 [NVidia]
    Card hw:1 'NVidia'/'HDA NVidia at 0x53000000 irq 17'
    Mixer name : 'Nvidia GPU 0b HDMI/DP'
    Components : 'HDA:10de000b,10de0101,00100200'
    Controls : 24
    Simple ctrls : 4
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',1
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',2
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',3
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    !!Alsactl output
    --startcollapse--
    state.Intel {
    control.1 {
    iface MIXER
    name 'Beep Playback Volume'
    value.0 35
    value.1 35
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 65'
    dbmin -3500
    dbmax 3000
    dbvalue.0 0
    dbvalue.1 0
    control.2 {
    iface MIXER
    name 'Beep Playback Switch'
    value.0 false
    value.1 false
    comment {
    access 'read write'
    type BOOLEAN
    count 2
    control.3 {
    iface CARD
    name 'Line Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.4 {
    iface MIXER
    name 'PCM Playback Volume'
    value.0 255
    value.1 255
    comment {
    access 'read write user'
    type INTEGER
    count 2
    range '0 - 255'
    tlv '0000000100000008ffffec1400000014'
    dbmin -5100
    dbmax 0
    dbvalue.0 0
    dbvalue.1 0
    state.NVidia {
    control.1 {
    iface CARD
    name 'HDMI/DP,pcm=3 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.2 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.3 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.4 {
    iface MIXER
    name 'IEC958 Playback Default'
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.5 {
    iface MIXER
    name 'IEC958 Playback Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.6 {
    iface PCM
    device 3
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.7 {
    iface CARD
    name 'HDMI/DP,pcm=7 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.8 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 1
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.9 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 1
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.10 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 1
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.11 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 1
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.12 {
    iface PCM
    device 7
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.13 {
    iface CARD
    name 'HDMI/DP,pcm=8 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.14 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 2
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.15 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 2
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.16 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 2
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.17 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 2
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.18 {
    iface PCM
    device 8
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.19 {
    iface CARD
    name 'HDMI/DP,pcm=9 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.20 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 3
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.21 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 3
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.22 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 3
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.23 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 3
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.24 {
    iface PCM
    device 9
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    --endcollapse--
    !!All Loaded Modules
    Module
    zram
    lm85
    hwmon_vid
    aes_i586
    cryptd
    aes_generic
    act_police
    cls_basic
    cls_flow
    cls_fw
    cls_u32
    sch_tbf
    sch_prio
    sch_htb
    sch_hfsc
    sch_ingress
    sch_sfq
    bridge
    stp
    llc
    xt_statistic
    xt_CT
    xt_LOG
    xt_time
    xt_connlimit
    xt_realm
    xt_addrtype
    iptable_raw
    xt_comment
    xt_recent
    xt_policy
    ipt_ULOG
    ipt_REJECT
    ipt_REDIRECT
    ipt_NETMAP
    ipt_MASQUERADE
    ipt_ECN
    ipt_CLUSTERIP
    ipt_ah
    xt_set
    ip_set
    nf_nat_tftp
    nf_nat_snmp_basic
    nf_conntrack_snmp
    nf_nat_sip
    nf_nat_pptp
    nf_nat_proto_gre
    nf_nat_irc
    nf_nat_h323
    nf_nat_ftp
    nf_nat_amanda
    ts_kmp
    nf_conntrack_amanda
    nf_conntrack_sane
    nf_conntrack_tftp
    nf_conntrack_sip
    nf_conntrack_proto_udplite
    nf_conntrack_proto_sctp
    nf_conntrack_pptp
    nf_conntrack_proto_gre
    nf_conntrack_netlink
    nf_conntrack_netbios_ns
    nf_conntrack_broadcast
    nf_conntrack_irc
    nf_conntrack_h323
    nf_conntrack_ftp
    xt_TPROXY
    nf_defrag_ipv6
    nf_tproxy_core
    ip6_tables
    xt_tcpmss
    xt_pkttype
    xt_physdev
    xt_owner
    xt_NFQUEUE
    xt_NFLOG
    nfnetlink_log
    xt_multiport
    xt_mark
    xt_mac
    xt_limit
    xt_length
    xt_iprange
    xt_helper
    xt_hashlimit
    xt_DSCP
    xt_dscp
    xt_dccp
    xt_conntrack
    xt_connmark
    xt_CLASSIFY
    xt_AUDIT
    xt_state
    iptable_nat
    nf_nat
    nf_conntrack_ipv4
    nf_defrag_ipv4
    nf_conntrack
    iptable_mangle
    nfnetlink
    xt_tcpudp
    iptable_filter
    ip_tables
    x_tables
    arc4
    fuse
    nvidia
    snd_hda_codec_hdmi
    ppdev
    ath9k_htc
    ath9k_common
    microcode
    ath9k_hw
    ath
    serio_raw
    psmouse
    evdev
    mac80211
    ums_cypress
    cfg80211
    compat
    usb_storage
    rfkill
    i2c_i801
    uas
    rc_ati_x10
    iTCO_wdt
    firewire_ohci
    ati_remote
    iTCO_vendor_support
    e100
    firewire_core
    mii
    rc_core
    crc_itu_t
    snd_hda_codec_realtek
    parport_pc
    parport
    snd_hda_intel
    snd_hda_codec
    snd_pcm
    snd_page_alloc
    snd_hwdep
    snd_timer
    nfsd
    exportfs
    intel_agp
    intel_gtt
    snd
    nfs
    i2c_core
    agpgart
    nfs_acl
    lockd
    soundcore
    auth_rpcgss
    button
    processor
    sunrpc
    fscache
    autofs4
    ext4
    crc16
    jbd2
    mbcache
    usbhid
    hid
    sr_mod
    cdrom
    pata_acpi
    ata_generic
    uhci_hcd
    ata_piix
    ehci_hcd
    usbcore
    usb_common
    sd_mod
    ahci
    libahci
    libata
    scsi_mod
    !!Sysfs Files
    /sys/class/sound/hwC0D2/init_pin_configs:
    0x14 0x00000000
    0x15 0x00000000
    0x16 0x00000000
    0x17 0x00000000
    0x18 0x00000000
    0x19 0x00000000
    0x1a 0x01810000
    0x1b 0x00000000
    0x1c 0x40000000
    0x1d 0x00000000
    0x1e 0x00000000
    0x1f 0x00000000
    /sys/class/sound/hwC0D2/driver_pin_configs:
    /sys/class/sound/hwC0D2/user_pin_configs:
    /sys/class/sound/hwC0D2/init_verbs:
    /sys/class/sound/hwC1D0/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D0/driver_pin_configs:
    /sys/class/sound/hwC1D0/user_pin_configs:
    /sys/class/sound/hwC1D0/init_verbs:
    /sys/class/sound/hwC1D1/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D1/driver_pin_configs:
    /sys/class/sound/hwC1D1/user_pin_configs:
    /sys/class/sound/hwC1D1/init_verbs:
    /sys/class/sound/hwC1D2/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D2/driver_pin_configs:
    /sys/class/sound/hwC1D2/user_pin_configs:
    /sys/class/sound/hwC1D2/init_verbs:
    /sys/class/sound/hwC1D3/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D3/driver_pin_configs:
    /sys/class/sound/hwC1D3/user_pin_configs:
    /sys/class/sound/hwC1D3/init_verbs:
    !!ALSA/HDA dmesg
    [ 3.398568] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 3.431145] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 3.462799] parport_pc 00:07: reported by Plug and Play ACPI
    [ 3.462832] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 3.467010] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 3.468096] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 3.471112] hda_intel: Disabling MSI
    [ 3.522125] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.173059] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 45 credits
    [ 4.263632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.263914] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.264134] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.264423] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 4.267027] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    I'll also see what kind of help I can get from the developers upstream.

  • HT203254 My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?

    My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?

    I tried last week. The best I could get was a discount on the repair, but the damage to my logic board by the GPU caused it to no longer boot. The program ended in December last year, but it has been extended in the past.
    If you have no other damage you might be able to get a flat rate tier 1 repair if you are in the USA.

  • HT203254 mac book pro 2008 with NVIDIA GeForce 8600M GT graphics processor...

    Hi,
    I just want to know if my mac book pro 2008 15" with NVIDIA GeForce 8600M GT graphics processor can be changed or repaired?My Mac doesnt have display on it...Sometimes it shows up...but after a while its black screen again..tnx

    It's a little late for me to jump into your discussion, I only read it when I posted an issue with the same model.
    Well, I hope you got it fixed soon enough in 2012, because as I learned in the past few days after purchasing that model and reading up on the issues, Apple stopped the care for this fault on December 7th or so in 2012.
    Seeing that people still get problems due to that graphics card, I should try to return the used one I just bought. I might run well now, but who knows how long.

  • [SOLVED] Fixing slow scrolling in firefox with nvidia and 64 bit

    I'm experiencing very slow scrolling with firefox on sites like
    http://www.roadrunnerrecords.com/blabbermouth.net/
    http://www.vai.com/News/index.html
    I'm running 64 bit with KDEmod. Scrolling is fine when I remove flash completely but on Ubuntu 10.04 (64 bit) the abnove sites scroll fine on a different machine (with intel graphics). I read somewhere by modifying xorg with "AccelMethod" "EXA" to "XXA" scrolling becomes very smoth onm ATI and Intel. Here is my xorg.conf:
    Section "ServerLayout"
            Identifier     "X.org Configured"
            Screen      0  "Screen0" 0 0
            InputDevice    "Mouse0" "CorePointer"
            InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
            ModulePath   "/usr/lib/xorg/modules"
            FontPath     "/usr/share/fonts/misc"
            FontPath     "/usr/share/fonts/100dpi:unscaled"
            FontPath     "/usr/share/fonts/75dpi:unscaled"
            FontPath     "/usr/share/fonts/TTF"
            FontPath     "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
            Load  "glx"
            Load  "record"
            Load  "dbe"
            Load  "extmod"
    EndSection
    Section "InputDevice"
            Identifier  "Keyboard0"
            Driver      "kbd"
    EndSection
    Section "InputDevice"
            Identifier  "Mouse0"
            Driver      "mouse"
            Option      "Protocol" "auto"
            Option      "Device" "/dev/input/mice"
            Option      "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
            Identifier   "Monitor0"
            VendorName   "Monitor Vendor"
            ModelName    "Monitor Model"
            HorizSync    28.0 - 72.0
            VertRefresh  43.0 - 60.0
    EndSection
    Section "Device"
            Identifier  "Card0"
            Driver      "nvidia"
            VendorName  "nVidia Corporation"
            BoardName   "G92 [GeForce 9800 GT]"
            Option      "RenderAccel" "true"
            Option      "NoLogo" "true"
            Option      "AGPFastWrite" "true"
            Option      "EnablePageFlip" "true"
            BusID       "PCI:1:0:0"
    EndSection
    Section "Screen"
            Identifier "Screen0"
            Device     "Card0"
            Monitor    "Monitor0"
            SubSection "Display"
                    Viewport   0 0
                    Depth     1
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     4
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     8
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     15
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     16
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     24
                    Modes    "1680x1050"
            EndSubSection
    EndSection
    Section "Extensions"
            Option "Composite" "Enable"
            Option "RENDER" "Enable"
    EndSection
    is there something I can change to improve scrolling in firefox? I've tried to turnoff desktop effects and scrolling is the same annd also running firefox from a fresh profile. Hence, i suspect my nvidia 9800GT card to be the culprit. If anyone has a working xorg.conf with nvidia, 64 bit and smooth scrolling on the above mentioned sites please SHARE! Many Thanks!
    Last edited by fettouhi (2012-02-22 17:42:10)

    karol wrote:
    > Tried it now and that worked. Running without a xorg.conf buty now I can't turn on desktop effects in KDE. How do I set that up?
    Sorry, I don't use KDE, but it may be related to how do you start KDE: from xinit or via KDM or sth.
    > How do I determine what driver xorg is using now that I'm running without it xorg.conf?
    It's running the same driver as before.
    > Using the binary nvidia blob driver.
    Did you uninstall it? Did you install the nouveau driver? 'pacman -Qqs xf86-video' will tell you what drivers you have installed.
    No, I don't have the nouveau driver installed. I have to check if I have the nv driver installed but I didn't uninstall the nvidia driver. I'm starting KDE via xinit.

  • [SOLVED] EDID read invalid with nvidia-313.18

    Hello All,
    after several months of trouble-free operation, my main system started having issues with detecting my second monitor properly. I am quite sure that this has something to do with the latest nvidia driver (313.18) but since I don't use this machine daily, I can't say exactly.
    First, what's the problem? I have an nVidia GTX 460 card with two 26" TFTs @1920x1200 attached. No special configuration file has been necessary for some time now (everything detected automatically as needed). Now the main display (the left of two screens) is working as usual while the right one is limited to an 800x600 resolution. I've already tried several approaches to manually configure this one as intended but so far without success. nvidia-settings won't allow me to set any resolution other than Auto and is also weirdly showing the second display as DFP-3 whereas I think it used to be DFP-1 (following DFP-0 which is still active). A hardware issue can be eliminated as everything is smooth using an Ubuntu bootable CD which uses nouveau by default.
    Here's the Xorg.0.log with a clean configuration (i. e. no /etc/X11/xorg.conf.d/10-monitor.conf)
    [ 2.266]
    X.Org X Server 1.13.2
    Release Date: 2013-01-24
    [ 2.266] X Protocol Version 11, Revision 0
    [ 2.266] Build Operating System: Linux 3.7.4-1-ARCH x86_64
    [ 2.266] Current Operating System: Linux einstein 3.7.6-1-ARCH #1 SMP PREEMPT Mon Feb 4 09:15:13 CET 2013 x86_64
    [ 2.266] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=edf8551b-5b2d-4942-af17-b2ebb09a6cb6 ro quiet init=/usr/lib/systemd/systemd
    [ 2.266] Build Date: 25 January 2013 09:33:50AM
    [ 2.266]
    [ 2.266] Current version of pixman: 0.28.2
    [ 2.266] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2.266] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2.266] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 9 11:29:34 2013
    [ 2.268] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2.269] (==) No Layout section. Using the first Screen section.
    [ 2.269] (==) No screen section available. Using defaults.
    [ 2.269] (**) |-->Screen "Default Screen Section" (0)
    [ 2.269] (**) | |-->Monitor "<default monitor>"
    [ 2.269] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2.269] (==) Automatically adding devices
    [ 2.269] (==) Automatically enabling devices
    [ 2.269] (==) Automatically adding GPU devices
    [ 2.270] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2.270] Entry deleted from font path.
    [ 2.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2.271] Entry deleted from font path.
    [ 2.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2.271] Entry deleted from font path.
    [ 2.271] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2.271] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2.271] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2.271] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2.271] (II) Loader magic: 0x7fcc40
    [ 2.271] (II) Module ABI versions:
    [ 2.271] X.Org ANSI C Emulation: 0.4
    [ 2.271] X.Org Video Driver: 13.1
    [ 2.271] X.Org XInput driver : 18.0
    [ 2.271] X.Org Server Extension : 7.0
    [ 2.272] (--) PCI:*(0:1:0:0) 10de:0e22:19da:2166 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 2.272] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2.272] Initializing built-in extension Generic Event Extension
    [ 2.272] Initializing built-in extension SHAPE
    [ 2.272] Initializing built-in extension MIT-SHM
    [ 2.272] Initializing built-in extension XInputExtension
    [ 2.272] Initializing built-in extension XTEST
    [ 2.272] Initializing built-in extension BIG-REQUESTS
    [ 2.272] Initializing built-in extension SYNC
    [ 2.272] Initializing built-in extension XKEYBOARD
    [ 2.272] Initializing built-in extension XC-MISC
    [ 2.272] Initializing built-in extension SECURITY
    [ 2.272] Initializing built-in extension XINERAMA
    [ 2.272] Initializing built-in extension XFIXES
    [ 2.272] Initializing built-in extension RENDER
    [ 2.272] Initializing built-in extension RANDR
    [ 2.272] Initializing built-in extension COMPOSITE
    [ 2.272] Initializing built-in extension DAMAGE
    [ 2.272] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2.272] Initializing built-in extension DOUBLE-BUFFER
    [ 2.272] Initializing built-in extension RECORD
    [ 2.272] Initializing built-in extension DPMS
    [ 2.272] Initializing built-in extension X-Resource
    [ 2.272] Initializing built-in extension XVideo
    [ 2.272] Initializing built-in extension XVideo-MotionCompensation
    [ 2.272] Initializing built-in extension XFree86-VidModeExtension
    [ 2.272] Initializing built-in extension XFree86-DGA
    [ 2.272] Initializing built-in extension XFree86-DRI
    [ 2.272] Initializing built-in extension DRI2
    [ 2.272] (II) LoadModule: "glx"
    [ 2.273] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2.346] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2.346] compiled for 4.0.2, module version = 1.0.0
    [ 2.346] Module class: X.Org Server Extension
    [ 2.346] (II) NVIDIA GLX Module 313.18 Wed Jan 9 15:34:35 PST 2013
    [ 2.346] Loading extension GLX
    [ 2.346] (==) Matched nouveau as autoconfigured driver 0
    [ 2.346] (==) Matched nvidia as autoconfigured driver 1
    [ 2.346] (==) Matched nv as autoconfigured driver 2
    [ 2.346] (==) Matched vesa as autoconfigured driver 3
    [ 2.346] (==) Matched modesetting as autoconfigured driver 4
    [ 2.346] (==) Matched fbdev as autoconfigured driver 5
    [ 2.346] (==) Assigned the driver to the xf86ConfigLayout
    [ 2.346] (II) LoadModule: "nouveau"
    [ 2.347] (WW) Warning, couldn't open module nouveau
    [ 2.347] (II) UnloadModule: "nouveau"
    [ 2.347] (II) Unloading nouveau
    [ 2.347] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 2.347] (II) LoadModule: "nvidia"
    [ 2.347] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2.355] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2.355] compiled for 4.0.2, module version = 1.0.0
    [ 2.355] Module class: X.Org Video Driver
    [ 2.356] (II) LoadModule: "nv"
    [ 2.356] (WW) Warning, couldn't open module nv
    [ 2.356] (II) UnloadModule: "nv"
    [ 2.356] (II) Unloading nv
    [ 2.356] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 2.356] (II) LoadModule: "vesa"
    [ 2.356] (WW) Warning, couldn't open module vesa
    [ 2.356] (II) UnloadModule: "vesa"
    [ 2.356] (II) Unloading vesa
    [ 2.356] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 2.356] (II) LoadModule: "modesetting"
    [ 2.357] (WW) Warning, couldn't open module modesetting
    [ 2.357] (II) UnloadModule: "modesetting"
    [ 2.357] (II) Unloading modesetting
    [ 2.357] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 2.357] (II) LoadModule: "fbdev"
    [ 2.357] (WW) Warning, couldn't open module fbdev
    [ 2.357] (II) UnloadModule: "fbdev"
    [ 2.357] (II) Unloading fbdev
    [ 2.357] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 2.357] (II) NVIDIA dlloader X Driver 313.18 Wed Jan 9 15:15:26 PST 2013
    [ 2.357] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2.357] (++) using VT number 1
    [ 2.358] (II) Loading sub module "wfb"
    [ 2.358] (II) LoadModule: "wfb"
    [ 2.358] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2.359] (II) Module wfb: vendor="X.Org Foundation"
    [ 2.359] compiled for 1.13.2, module version = 1.0.0
    [ 2.359] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2.359] (II) Loading sub module "ramdac"
    [ 2.359] (II) LoadModule: "ramdac"
    [ 2.359] (II) Module "ramdac" already built-in
    [ 2.360] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2.360] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 2.360] (==) NVIDIA(0): RGB weight 888
    [ 2.360] (==) NVIDIA(0): Default visual is TrueColor
    [ 2.360] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2.360] (**) NVIDIA(0): Enabling 2D acceleration
    [ 3.170] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 3.170] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 3.229] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 3.229] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 3.229] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 3.229] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 3.229] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 3.229] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 3.229] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 3.229] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.230] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:1:0:0 (GPU-0)
    [ 3.230] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 3.230] (--) NVIDIA(0): VideoBIOS: 70.04.13.00.a3
    [ 3.230] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 3.232] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 460 at PCI:1:0:0
    [ 3.232] (--) NVIDIA(0): CRT-0
    [ 3.232] (--) NVIDIA(0): CRT-1
    [ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0) (connected)
    [ 3.232] (--) NVIDIA(0): DFP-1
    [ 3.232] (--) NVIDIA(0): DFP-2
    [ 3.232] (--) NVIDIA(0): DFP-3 (connected)
    [ 3.232] (--) NVIDIA(0): DFP-4
    [ 3.232] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0): 330.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0): Internal Dual Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-3: Internal Dual Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-4: Internal DisplayPort
    [ 3.232] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.232] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 3.232] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 3.233] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.233] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 3.233] (**) NVIDIA(0): all display devices.)
    [ 3.233] (==) NVIDIA(0):
    [ 3.233] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 3.233] (==) NVIDIA(0): will be used as the requested mode.
    [ 3.233] (==) NVIDIA(0):
    [ 3.233] (II) NVIDIA(0): Validated MetaModes:
    [ 3.233] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
    [ 3.233] (II) NVIDIA(0): Virtual screen size determined to be 2720 x 1200
    [ 3.261] (--) NVIDIA(0): DPI set to (88, 89); computed from "UseEdidDpi" X config
    [ 3.261] (--) NVIDIA(0): option
    [ 3.261] (--) Depth 24 pixmap format is 32 bpp
    [ 3.261] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 3.261] (II) NVIDIA: access.
    [ 3.265] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 3.265] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 3.265] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 3.265] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 3.265] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 3.265] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 3.265] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 3.265] (II) NVIDIA(0): Config Options in the README.
    [ 3.267] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
    [ 3.357] Loading extension NV-GLX
    [ 3.452] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 3.452] (==) NVIDIA(0): Backing store disabled
    [ 3.452] (==) NVIDIA(0): Silken mouse enabled
    [ 3.453] (==) NVIDIA(0): DPMS enabled
    [ 3.453] Loading extension NV-CONTROL
    [ 3.453] Loading extension XINERAMA
    [ 3.453] (II) Loading sub module "dri2"
    [ 3.453] (II) LoadModule: "dri2"
    [ 3.453] (II) Module "dri2" already built-in
    [ 3.453] (II) NVIDIA(0): [DRI2] Setup complete
    [ 3.453] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 3.453] (--) RandR disabled
    [ 3.456] (II) Initializing extension GLX
    [ 3.502] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 3.503] (**) Power Button: Applying InputClass "system-keyboard"
    [ 3.503] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 3.503] (II) LoadModule: "evdev"
    [ 3.503] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 3.505] (II) Module evdev: vendor="X.Org Foundation"
    [ 3.505] compiled for 1.13.0, module version = 2.7.3
    [ 3.505] Module class: X.Org XInput Driver
    [ 3.505] ABI class: X.Org XInput driver, version 18.0
    [ 3.505] (II) Using input driver 'evdev' for 'Power Button'
    [ 3.505] (**) Power Button: always reports core events
    [ 3.505] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 3.505] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 3.505] (--) evdev: Power Button: Found keys
    [ 3.505] (II) evdev: Power Button: Configuring as keyboard
    [ 3.505] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 3.505] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 3.505] (**) Option "xkb_rules" "evdev"
    [ 3.505] (**) Option "xkb_model" "pc105"
    [ 3.505] (**) Option "xkb_layout" "de"
    [ 3.505] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.529] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 3.529] (**) Power Button: Applying InputClass "system-keyboard"
    [ 3.529] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 3.529] (II) Using input driver 'evdev' for 'Power Button'
    [ 3.529] (**) Power Button: always reports core events
    [ 3.529] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 3.529] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 3.529] (--) evdev: Power Button: Found keys
    [ 3.529] (II) evdev: Power Button: Configuring as keyboard
    [ 3.529] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
    [ 3.529] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 3.529] (**) Option "xkb_rules" "evdev"
    [ 3.529] (**) Option "xkb_model" "pc105"
    [ 3.529] (**) Option "xkb_layout" "de"
    [ 3.529] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.530] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 3.530] (II) No input driver specified, ignoring this device.
    [ 3.530] (II) This device may have been added with another device file.
    [ 3.530] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 3.530] (II) No input driver specified, ignoring this device.
    [ 3.530] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event3)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event4)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.532] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
    [ 3.532] (II) No input driver specified, ignoring this device.
    [ 3.532] (II) This device may have been added with another device file.
    [ 3.532] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
    [ 3.532] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 3.532] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 3.532] (**) Logitech USB Receiver: always reports core events
    [ 3.532] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
    [ 3.532] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51a
    [ 3.532] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 3.532] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 3.532] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 3.532] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 3.532] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 3.532] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 3.532] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 3.532] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3.532] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input7/event7"
    [ 3.532] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
    [ 3.532] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 3.533] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 3.533] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 3.533] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 3.533] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 3.533] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 3.533] (II) No input driver specified, ignoring this device.
    [ 3.533] (II) This device may have been added with another device file.
    [ 3.533] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
    [ 3.533] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
    [ 3.533] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 3.533] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 3.533] (**) Logitech USB Receiver: always reports core events
    [ 3.533] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
    [ 3.534] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51a
    [ 3.534] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 3.534] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 3.534] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 3.534] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 3.534] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 3.534] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 3.534] (--) evdev: Logitech USB Receiver: Found keys
    [ 3.534] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 3.534] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 3.534] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 3.534] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 3.534] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3.534] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input8/event8"
    [ 3.534] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
    [ 3.534] (**) Option "xkb_rules" "evdev"
    [ 3.534] (**) Option "xkb_model" "pc105"
    [ 3.534] (**) Option "xkb_layout" "de"
    [ 3.534] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.534] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 3.534] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 3.534] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 3.534] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 3.534] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 3.534] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 3.535] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/event9)
    [ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
    [ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3.535] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Pro Keyboard'
    [ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
    [ 3.535] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event9"
    [ 3.535] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Vendor 0x45e Product 0xb0
    [ 3.535] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
    [ 3.535] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
    [ 3.535] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input9/event9"
    [ 3.535] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD, id 10)
    [ 3.535] (**) Option "xkb_rules" "evdev"
    [ 3.535] (**) Option "xkb_model" "pc105"
    [ 3.535] (**) Option "xkb_layout" "de"
    [ 3.535] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.536] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/event10)
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3.536] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Pro Keyboard'
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
    [ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event10"
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Vendor 0x45e Product 0xb0
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found 1 mouse buttons
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found scroll wheel(s)
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found relative axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found absolute axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found absolute multitouch axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found x and y absolute axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Forcing relative x/y axes to exist.
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as mouse
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Adding scrollwheel support
    [ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: YAxisMapping: buttons 4 and 5
    [ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input10/event10"
    [ 3.536] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD, id 11)
    [ 3.536] (**) Option "xkb_rules" "evdev"
    [ 3.536] (**) Option "xkb_model" "pc105"
    [ 3.536] (**) Option "xkb_layout" "de"
    [ 3.536] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: initialized for relative axes.
    [ 3.536] (WW) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: ignoring absolute axes.
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) keeping acceleration scheme 1
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration profile 0
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration factor: 2.000
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration threshold: 4
    [ 3.537] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/js0)
    [ 3.537] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
    [ 3.537] (II) No input driver specified, ignoring this device.
    [ 3.537] (II) This device may have been added with another device file.
    [ 3.537] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event6)
    [ 3.537] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
    [ 3.537] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 3.537] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
    [ 3.537] (**) Eee PC WMI hotkeys: always reports core events
    [ 3.537] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event6"
    [ 3.537] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
    [ 3.537] (--) evdev: Eee PC WMI hotkeys: Found keys
    [ 3.537] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
    [ 3.537] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input6/event6"
    [ 3.537] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
    [ 3.537] (**) Option "xkb_rules" "evdev"
    [ 3.537] (**) Option "xkb_model" "pc105"
    [ 3.537] (**) Option "xkb_layout" "de"
    [ 3.537] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.538] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 3.538] (II) No input driver specified, ignoring this device.
    [ 3.538] (II) This device may have been added with another device file.
    [ 3.542] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event4)
    [ 3.542] (II) No input driver specified, ignoring this device.
    [ 3.542] (II) This device may have been added with another device file.
    [ 3.542] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 3.542] (II) No input driver specified, ignoring this device.
    [ 3.542] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event3)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.620] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 3.620] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 3.620] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.620] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 3.620] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 3.679] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 3.679] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 3.679] (--) NVIDIA(GPU-0):
    [ 3.679] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 3.679] (--) NVIDIA(GPU-0):
    [ 3.679] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 3.679] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 3.679] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 3.679] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 3.679] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 3.679] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 3.679] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 3.679] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 3.680] (--) NVIDIA(GPU-0):
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0):
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0):
    [ 3.680] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.680] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 3.680] (**) NVIDIA(0): all display devices.)
    [ 4.259] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 4.259] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 4.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4.259] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 4.259] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 4.319] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 4.319] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 4.319] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 4.319] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 4.319] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 4.319] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 4.319] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 4.319] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4.319] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 4.319] (**) NVIDIA(0): all display devices.)
    [ 16.599] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 16.599] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 16.599] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 16.599] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 16.599] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 16.659] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 16.659] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 16.659] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 16.659] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 16.659] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 16.659] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 16.659] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 16.659] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 16.659] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 16.659] (**) NVIDIA(0): all display devices.)
    [ 17.393] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 17.393] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 17.393] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 17.393] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 17.393] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 17.453] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 17.453] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 17.453] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 17.453] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 17.453] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 17.453] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 17.453] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 17.453] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 17.453] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 17.453] (**) NVIDIA(0): all display devices.)
    As you can see, the EDID information cannot be obtained from the second display. Since I haven't found any indication of this being a bug in the latest nVidia driver, I wanted to ask whether you have come across any hints or explanations.
    For the time being, I can live with it but I'm actually considering moving to nouveau instead now.
    Thanks for your time. Cheers
    Smoerrebroed
    Last edited by Smoerrebroed (2013-05-04 11:34:32)

    Alright, though it still bothers me that for some reason the nvidia driver no longer correctly reads and processes EDID information on all connectors, supplying DFP-0's EDID to DFP-3 via the "CustomEDID" option fixed all woes. 1920x1200 is now again detected as default, TwinView is enabled and so on ... even without a sophisticated 10-monitor.conf:
    Section "Device"
    Identifier "GeForce GTX 460"
    Driver "nvidia"
    Option "CustomEDID" "DFP-3:/etc/X11/xorg.conf.d/edid.bin"
    EndSection
    Everything else remains at default and works. Perhaps this post will also help others in dealing with nvidia issues.
    One thing this has taught me though is: As much inclined as I am towards open source software, the nouveau driver is really still a long way off the performance of the proprietary nvidia module. If you want/need to work seriously in 3D, there's no alternative.
    Cheers
    Smoerrebroed
    Last edited by Smoerrebroed (2013-05-31 19:36:45)

  • Problem with NVidia Quadro FX 4000 on MSI K8T Master2-Far

    Hello everyone, I am new to the forums here.  I cannot figure out what is causing my problem.
    I have been having performance issues with my new Quadro FX 4000 on my system.  I have been in communication with Nvidia tech support for a while now.  Here is the discussion I have been having with them.  It explains my problem in detail.  Be sure to read it from bottom to top though.
    *Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks.
    Response (GL)
    Pat,
    I have checked the NVBug Database and although there has been Bugs submitted where a MSI Master2-Far motherboard was used, none of the issues were caused by the motherboard. They just happened to have a MSI Master2-Far motherboard.
    We have seen conflicts when both ATI and NVIDIA drivers are both installed, but I would hope that the Driver Cleaner software removed the lines in the registry as well.
    Did you try the FX4000 in the other system (the one that had the MX 440) ?
    I believe you are taking to right steps in resolving this issue.
    Looking at the Windows Error Reporting, it seems you have had some app problems.
    Looking forward in hearing your results
    Best regards,
    NVIDIA Customer Care.
     Customer (Pat Miller) 02/07/2007 12:19 AM 
    OK I completed my tests and got some interesting results.
    -I installed the GeForce Mx 440 on my computer and it yielded similar poor performance just like the Quadro did (terrible window scrolling, stuttering, horrible gaming).
    -I then installed the Quadro on the computer I yanked the Geforce MX 440 from.  I installed the most recent drivers, and it worked WONDERFULLY.  There was no stuttering, no lagging, and Open GL gaming seemed even better than the MX 440 (I know the Quadro is not designed for gaming, but some Open GL counter-strike served as a nice little test.)  Unfortunately, that computer does not have Adobe Premiere or any high-end applications for me to really test the card with.
    -After those two tests, I uninstalled the MX 440 from my computer and re-installed its ORIGINAL ATI 9600 SE.  It worked just like it did before I first received the Quadro.  No window lagging, no stuttering, and adequate gaming.
    All of these test yield a few conclusions to me:
    1. The Quadro FX 4000 card is not defective, it does indeed work.
    2. My computer seems to dislike Nvidia cards and/or drivers (seeing as the Quadro and GeForce gave me terrible results while the ATI worked fine.)
    It would seem to be a driver issue, almost like my original ATI driver files are still running.  That would explain everything.  However, I completely removed the ATI driver AND ran Driver Cleaner to clear all ATI files from my system before attempting to install the Nvidia card.
    I cannot think of a reason for these inconsistencies. Tomorrow I plan on preparing to completely crash my computer. Backup my files and completely format my HD's and reinstalled Windows XP Pro, my Mobo software, all drivers, ect.
    I will await any ideas or suggestions before I format my computer.  I hope these tests along with my system info helps.  Thank you very much.
     Customer (Pat Miller) 02/06/2007 07:51 PM 
    Ok,
    Here is my system info.  I realize that the Quadro FX 4000 has a conflicting IRQ with my onboard gigabyte ethernet, but my old ATI card was the same way, and it never caused a problem.  Also, I am unsure how to fix that anyways.  Hopefully this info helps us determine the problem.
    I am going to try a few tests of my own.  I am going to install a GeForce MX 440 AGP card(from my other computer) and see how it performs.  Then I will try re-installing my old ATI 9600SE card.  If I get similar low performance, than it must be something else besides the card.  Otherwise, the card is the issue.
    Thanks for the help.
     Response (GL) 02/06/2007 12:15 PM 
    Pat,
    Maybe the system info will shed some light.
    Please perform the following steps:
    1) Click on the Start button
    2) Select Run
    3) In the Open field, type in "msinfo32" and then press the OK button
    4) This will bring up the Microsoft System Information Utility. 
        Click on File and then Save to save this information to your hard drive. You may give it any name you choose.
    5) Once the file has been saved on your hard drive, attach it to this support request so that we may review your system configuration.
    Looking forward for your response.
    Best regards,
    NVIDIA Customer Care.
     Customer (Pat Miller) 02/02/2007 05:19 PM 
    I completely uninstalled my old ATI and Nvidia drivers.  I went into safe mode and ran Driver Cleaner also.  I freshly installed the new Nvidia driver and I still have low performance.
    I am trying to download Viewperf, but it is downloading at about 30k/s, which will take about a day to finish.  What else could be causing this?  It is possible its a bad card? I got it new on Ebay from a legitimate seller, but it came with the card only.
     Response (GL) 02/01/2007 06:00 PM 
    Thank you for contacting NVIDIA Customer Care
    There should not be any performance drop browsing the internet or moving windows across screens.
    Since you did have an ATI card installed, you may want to verify that all files have been removed.
    This also includes the registry since there are applications known to leave files behind.
    Once all ATI files have been removed, please run a benchmark software such as ViewPerf.
    Viewperf 9.03 can be found on the following location:
    http://www.spec.org/gpc/downloadindex.html
    Best regards
    NVIDIA Customer Care
     Customer (Pat Miller) 02/01/2007 01:35 PM 
    I recently upgraded to a Quadro FX 4000.  I do a lot of video editing on Premiere, and from what I read, it seemed like the best card to get.  However, I am getting very poor performance with this card.  For example, just browing the internet and moving windows around yields a very stuttery picture.  And I do not notice any different using Premiere.
    I uninstalled my old video card (ATI 9600 SE) and uninstalled the drivers for it as well.
    I have tried 3 different versions of drivers for the Quadro 4000, including the most recent.
    I have checked the power connections, and the card is receiving power on both the ports.
    I really have no idea what could be causing this bad performance.  Is this how the card works?  Did my ATI 9600SE yield better performance for internet browsing than this card does?  The only thing I can think of is that the card is not getting enough power because it connects to 2 seperate power cables from the PSU which already power lots of other things (HD's, Disk Drives, Fans).
    Any help is greatly appreciated.  Here at my system specs:
    Custom built PC
    MSI Master2-Far Mobo
    2x AMD Opteron 244
    2G Transcend DDR 333 Registered Ram(1 stick)
    2x WD 74G Raptors (RAID 0)
    1x Maxtor 250G
    2x DVD burner
    1x DVD Rom
    Quadro FX 4000 AGP
    *Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks.

    Hi there, welcome to forum.
    "*Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks."
    your PSU is good one and should be powerfull enough.
    Output    +3.3V@28A, +5V@30A, +12V@34A, [email protected], [email protected], +5VSB@2A
    can't be power related, since at 1st your PSU must be enough, 2nd same issue happend with your old mx 440 VGA. card malfunction are dismissed as possibility as well since its work fine in another machine.
    think its drivers mess. ATI drivers(or part of them) still exist, guess is not completely removed. same symptoms happend many times when switching between Ati to NV, lagging 2D scrolling lag and etc, caused by ATI Smart (part of ATI Drivers) sometimes remain(survive after driver cleaner).
    suggest you a new clean fresh OS installation. like Nv support already directed. also ensure in BIOS, in "Integrated Peripherals", "Init Display First" are configured to AGP.
    let we know how its going, if problem persist we a ready with a tips to resolve your issue.

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • Tty display problems with nvidia and uvesafb

    I'm trying to get my console to display correctly at 1080p; trying to do so through GRUB was always an absolute nightmare.
    The console displays fine with nouveau, but nouveau causes the infamous pink line bug, which is simply too irritating to ignore; nouveau is not an option.
    In the past, my console has run at low res and incorrect scale with nvidia, but I've ignored the problem since I prefer to use a virtual terminal in X.
    Now, if possible, I need to use the actual console for the purposes of module development.
    I installed v86d and uvesafb and configured the console for 1920x1080 and 32 bit depth.
    The console is displaying with the correct resolution now, but is surrounded by a black border, making the font distorted and extremely difficult to read.
    How can I get my console to scale correctly to fullscreen? Any ideas at all. I found nothing in the forums or wiki, and I'm out.
    I'm fairly certain there are no vga or video settings in GRUB that are interfering.

    Output of "pacman -Qi nvidia"
    Name : nvidia
    Version : 343.36-2
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.17 linux<3.18 nvidia-libgl nvidia-utils=343.36
    Optional Deps : None
    Required By : None
    Optional For : None
    Conflicts With : None
    Replaces : None
    Installed Size : 5.30 MiB
    Packager : Felix Yan <[email protected]>
    Build Date : Thu 11 Dec 2014 08:32:19 AM CST
    Install Date : Fri 12 Dec 2014 12:10:32 AM CST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    Output "cat /boot/grub/grub.cfg"
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    if [ "${next_entry}" ] ; then
    set default="${next_entry}"
    set next_entry=
    save_env next_entry
    set boot_once=true
    else
    set default="0"
    fi
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    set menu_color_normal=green/black
    set menu_color_highlight=black/green
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    insmod png
    background_image -m stretch /boot/grub/archgrub.png
    if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
    # Fallback normal timeout code in case the timeout_style feature is
    # unavailable.
    else
    set timeout=5
    fi
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
    menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    ### BEGIN /etc/grub.d/60_memtest86+ ###
    ### END /etc/grub.d/60_memtest86+ ###
    Output "cat /usr/lib/modprobe.d/uvesafb.conf"
    Video mode is set as "1920x1080-32".
    # This file sets the parameters for uvesafb module.
    # The following format should be used:
    # options uvesafb mode=<xres>x<yres>[-<bpp>][@<refresh>] scroll=<ywrap|ypan|redraw> ...
    # For more details see:
    # http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/fb/uvesafb.txt
    options uvesafb mode_option=1920x1080-32 scroll=ywrap
    This file is mirrored in /etc/modprobe.d/uvesafb.conf.
    Running "diff /usr/lib/modprobe.d/uvesafb.conf /etc/modprobe.d/uvesafb.conf" returns no output.
    Output of "cat /sys/class/graphics/fb0/virtual_size" is solely "1920,1080".
    ---edit---
    Output of "cat /etc/default/grub" in case it's helpful.
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    GRUB_CMDLINE_LINUX=""
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    #GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    GRUB_COLOR_NORMAL="green/black"
    GRUB_COLOR_HIGHLIGHT="black/green"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    GRUB_BACKGROUND="/boot/grub/archgrub.png"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    Also, it might help to describe the behaviour more specifically / more in depth...
    The rendered part of the console occupies the same space as the GRUB boot menu.
    I installed and configured virtualbox a few weeks previously.
    I ran "sudo depmod -a" as the wiki / forums indicated it could remedy problems with virtual machines failing to start.
    It did fix the virtualbox problem; after reboot, suddenly lightdm *also* initally occupied the same window space as grub.
    That was new behaviour. When I logged in to xmonad, the desktop displayed similarly to GRUB.
    I hadn't tried fixing it; logging in with root followed by "ps -e | grep X" and "kill -9 <Xpid>" caused X as a whole to start behaving and scaling normally.
    I haven't rebooted until attempting to rectify the issue with my console.
    The oddity with scaling in lightdm and xmonad still shows up after reboot and is still reparable by killing X.
    Killing X doesn't - obviously - have any effect on console scale.
    ---/edit---
    d(-_-)
    Last edited by seppukuzushi (2014-12-31 14:01:23)

  • T61 with Nvidia QUADRO: DVI on Advanced mini doc don't work

    Hello all,
    I have a very annoying problem with lenovo T61 with NVidia quadro nvs 140 (type 7664-1GG, 1400x900, 7200rpm wdigital hard upgrade, Vista Ultimate x86, 4 Gb RAM (2 Gb upgrade)). The external display (ViewSonic VP2030 20") on DVI does not work after turning reboot or undocking/docking again. Usually a reboot resolves the issue, but not now: finally it doesn't work even after rebooting. If I plug it (or another display) via D-SUB, it will work. The monitor's DVI definitely in excellent condition.
    It happend several times previously with various drivers and BIOS versions, better with one BIOS version and worse with another. Now I have the latest BIOS and latest NVidia driver.
    Please, help!!!!

    Hello all,
    I have a very annoying problem with lenovo T61 with NVidia quadro nvs 140 (type 7664-1GG, 1400x900, 7200rpm wdigital hard upgrade, Vista Ultimate x86, 4 Gb RAM (2 Gb upgrade)). The external display (ViewSonic VP2030 20") on DVI does not work after turning reboot or undocking/docking again. Usually a reboot resolves the issue, but not now: finally it doesn't work even after rebooting. If I plug it (or another display) via D-SUB, it will work. The monitor's DVI definitely in excellent condition.
    It happend several times previously with various drivers and BIOS versions, better with one BIOS version and worse with another. Now I have the latest BIOS and latest NVidia driver.
    Please, help!!!!

  • Why Apple don't systematically support the latest version of OpenGL and OpenCL with a new OS release?

    Why Apple don't systematically support the latest version of OpenGL and OpenCL with a new OS release?

    Maybe because it's necessary to build on a version that's been out long enough to be stable before releasing? Who knows?
    Are there specific features you're missing?

  • New MacbookPro with Nvidia Geforce GT 750M 2GB for Premiere and Aftereffects CS6, CC and CC14?

    I have Premiere Pro and AE CS6.
    My Mac got stolen, now i have to buy a new one.
    I think about buying the new Macbook Pro Retina with Nvidia Geforce GT 750M 2GB Graphicscard.
    I want hardware which works fine with both Premiere Pro, AE CS6 and the later versions! (Maybe i want to upgrade some time).
    What is the best configuration on a MacBook Pro that i can work with CS6 and later versions as good as possible?
    What is Mercury Playback Engine?
    What's CUDA?
    Can i use this GPU acceleration on the latest Macbook Pro with Nvidia GT 750M card in CS6, CC and CC14?
    Thanks very much!
    Greetings!
    Jakob

    Considering the new 15"...( 13" is USELESS) ...Macbook Pro starts at over $2,500 with the necessary i7 CPU, ( forget i5).....you would be WAY better served to go with a powerful Windows gaming laptop for HALF that price from a company like Asus,or, others.  If money is no object and you MUST go Apple, then, there are SOME pros and some cons.
    1. Pro - has Thunderbolt, for hi-speed EXPENSIVE external storage, or, for Hi -res external monitor....however, MY 2 year old Asus laptop HAS a "thunderbolt" port , TOO...which I use to drive a hi-res monitor.
       Con - though NVidia 750m 2GB GPU is adequate for much of the CUDA accelerated operations, newer Windows laptops have more advanced 800 and 900 series GPUs with far more video memory...for HALF the price !
    2. Pro -  PPro and AE runs best with Windows 8.1
      Con -  Mac operating system in the recent past has had issues and hiccups vs. Windows in running Premiere Pro....I'm not sure if all that has been fixed at this time.
    3. Pro -  newest mac book pro uses PCI SSD storage...amazing transfer speed of data !.....however, a 1TB flavor of this costs an additional $1,000
       Con - not sure of the maximum amount of system memory that can be installed in MBOOK PRO..."Apple Chat" guy says 16GB.....you need at least 24 GB...better to have 32 GB for best  operation. Also, some Windows gaming laptops offer internal RAID options for high speed storage ,or, at least two internal HDD bays for SSDs.
    In addition : The "Mercury Playback Engine" is a feature of Premiere pro which allows for the "acceleration" of certain effects and operations on the timeline...in many cases eliminating the the need to "render previews" to see what you are doing. When coupled with a capable NVidia GPU, this acceleration can produce a TEN TIMES IMPROVEMENT in processing the effects,or, operations, ( like "scaling"  and resolution conversions ) using the NVidia ONLY CUDA technology.
    In summary, the 16GB memory limit , the lower level NVidia mobile GPU, and EXCRUCIATING HIGH PRICE all tip the scales for me to say : NOOOOOO !!!!!......DON'T DO IT !!!
    IF a laptop is a MUST.....go with a Windows gaming rig and READ as much as you can first. If a desktop is a possible solution, you can get WAY better performance than a laptop...especially with today's Haswell E CPUs and the X99 motherboards.
    I would wait a little bit for all the machines to hit the market which have the NEW " NVMe" PCI SSDs in them, or, build your own on a motherboard which will NATIVELY have that feature.
    Good Luck !

Maybe you are looking for