No option to install SMD Agent Candidates using the SMD
Dears,
I want to bind a candidate SMD agent to my managing system. According to the guide I have to select one of the agent candidates and a new frame should appear where I can enter a username and a password.
The problem is that this frame does not appear.
Can someone help me out on this one ?
kind regards
Davy
Hi Davy,
This solution is only applicable for SolMan 7.0
1. Kindly check if the Maintenance Mode is OFF.
After selecting the candidate Agent, a new frame will be opened(not a window).
This frame will be just below the table, from where you have selected your Candidate agent.
You need to expand it.
I hope this will help.
For more details ::
https://websmp103.sap-ag.de/diagnostics
End to End Root Cause Analysis > Installation & Configuration > Root Cause Analysis Installation and Upgrade Guide
Refer to page 22( in pdf page 27 of 49).
Best Regards,
Pradeep Bishnoi
Similar Messages
-
I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have Lightroom 4 on disc which is installed on my Mac desktop. I want to use it on a new MacBook with no disc drive. Can I install it by download using the serial number? If so< how?
1. Go to the following website and download the last version of Lightroom 4:Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 4.4.1
2. Run the installation package to install Lightroom.
3. Use your existing serial number to activate the program. -
Installing Windows 7 Without Using The Boot Camp Installer (MacBook Pro)
I don't know if anyone knows this or not, but I was able to install Windows 7 on my MacBook Pro just using the Windows 7 install disk.
I restarted with the windows CD in, and when the screen said press any key to boot from CD, I pressed the space bar. When it got to the part to select the installation drive, I went into advanced and removed all the partitions and formatted the whole thing. There was a small system partition the cannot be deleted (probably reserved for the system). I was able to install Windows 7 and use the whole drive for it.
After running Windows 7, I was still able to install the Boot Camp Control Panel to set the keyboard, track pad, sound, and all the other funtions. If I tell it to reboot to the Apple OS, it just reboots to Window 7 with no problems.
Anyway, I thought it was pretty cool and might be helpful for people who want to run only Widows 7 on their MacBook Pro.
CAUTION... DO THIS AT YOUR OWN RISK!!!People have been using Mac as Windows-only.
On Mac Pro, with 4 internal drives, it is normal to not use anything other than the Windows DVD and install onto a dedicated drive, same as you did, only change it from GPT to MBR first.
There is no risk.
(Well, some feel that someone might 'need' OS X to do something like a firmware update I guess.) -
After installing elements 11 and using the editor, it will not reopen
after installing elements 11 and using the editor, it will not reopen
You know that you lost the layers when you saved it as a jpeg, right? But you're saying you can't add layers to the jpeg now when it's open in the editor? Go to Image>mode and be sure it's RGB, for starters. Are all the commands in the Layer menu grayed out?
-
Installing but can't use the css
I bought the P'shop CS6 at the Apple store, as well as my imac but ,even though I've regeistered with Adobe and have Reader, I'm not told how to get the program onto my compter. I'd appreciate any help. John
jrock wrote:
Hi. i didn't mention 'css'.
It's the subject heading of this thread which confused us: "installing but can't use the css". I suspect "css" is a typo and you meant CS6.
CS6 can be downloaded from
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Enter your serial number to license the software on your iMac. -
I need the Java Development Toolkit to work on a specific site to measure packet loss. As Firefox lists the plugin as a security risk there is no way to "enable" it permanently. So i choose the "ask to activate" option. but when i visit the site that requires java development toolkit, no option to click on anything to activate, no pop ups nothing. and i can't use the site.
Have installed latest java plugin, uninstalled, re-installed etc.
how can I solve this issue [short of dumping Firefox]Thanks for the prompt response Phillip.
I tried that and it allowed me to select to activate the development toolkit on that site but the feature on the site still didn't work.
I can access the site and get it to work in IE and so I tried opening the site in Firefox with IE tab 2 but still no luck.
I am trying to use the site pingtest.com to measure my internet performance but the packet test always fails with java toolkit error.
Any other ideas greatly appreciated as I hate using IE. I have latest java update and everything too
cheers dandelion777 -
Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS. -
I have ordered a new laptop and expect to receive it in 2-3 weeks. The laptop comes with an OEM version of Windows 8 installed. I wish
to install Linux as the host operating system and create a virtual machine running Windows 8. Can I legally use the product key from the OEM installation to activate a virtual machine that will only be used on the laptop that had the original OEM installation?
If so, what is the procedure to activate the copy installed on the virtual machine?
This question has been addressed for Windows 7, but my searches did not reveal this question posed for Windows 8.Technically, no. The OEM is licensed only for the physical hardware on the system. It isn't licensed for virtual hardware.
You may find you're unable to activate your OEM license in the VM. A lot of OEM Windows look for specific hardware to verify they're being installed on the correct hardware.
Although here: http://www.microsoft.com/oem/en/Pages/support-faq.aspx#fbid=Zh0SiBdas5I
Q. Can I install OEM on a virtual machine (VMware)?
A. You may install OEM in a virtual environment as long as you have a separate license for each instance of the software. It is fine to use the OEM version as long as it is properly licensed. To be clear, a separate version of software must be installed
for both the “standard” and “virtual” installations.
You still may not be able to activate if there is a hardware block.
The best place to ask this is to Microsoft licensing, any response you get here, including mine, won't hold up since it's not an official answer.
Q. Can I install OEM on a virtual machine (VMware)?
A. You may install OEM in a virtual environment as long as you have a separate license for each instance of the software. It is fine to use the OEM version
as long as it is properly licensed. To be clear, a separate version of software must be installed for both the “standard” and “virtual” installations.
edit: removed the duplicate Q&A -
Since purchase of my macmini (2011 model) I have been able to wake it from sleep by hitting the (wired) keyboard space bar.
However, I recently updated the OS to 10.7.4 using the combo (1.4Gb) update, since when I cannot wake the macmini in that way.
Now, after putting the macmini to sleep, pressing the spacebar causes it to shut down.
I then have to switch mains power off and on again at the wall socket, after which the macmini starts up from shutdown condition.
I am by no means an expert, and have not been fiddling with settings, so I am in need of advice on what could need resetting to allow me to return to the previous simple 'wake up' approach!
Thanks.Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Followed by resetting the PRAM > Resetting your Mac's PRAM and NVRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then if those do not fix the problem, you may need to reset your Energy Saver and Keyboard Preferences by readjusting them. -
Tip: Unable to Install or Update Apps Using the iPhone's App Store?
I had a problem today where I found myself unable to install updates, or install new or previously purchased apps using the App Store on the iPhone. However, I had no problem with the installation of apps when I plugged my iPhone into my computer, opened iTunes and dragged the app I wanted over to my iPhone. So, I did the usual: I tried a reboot, and, when that didn't work, I powered my phone off and waited a few minutes before turning it back on. Still no love with the updating or installation of apps using the App Store on my iPhone.
Here is what I did do to fix it:
I keep backups of my iPhone on my MBP and I back up my phone regularly. If you do not, you should start doing so. Anyway, I went ahead and plugged my phone into my computer and launched iTunes (I also update my MBP daily if necessary, so the most current version of iTunes was used).
Once my phone showed up in iTunes and I could select it, I right-clicked on the iPhone's name (I use a MBP, but I know Windows users might view this, too, so universal language is what I will use - for Mac users, right-clicking means using two finger tap on a touchpad or using the good 'ol Control-click) and selected "Back Up" from the menu.
Once the phone was backed up, I right-clicked again on the iPhone's name and selected "Restore from Backup...".
I made sure the value for "iPhone Name" was correct and that the "Last Backed Up" day and time values were correct and I clicked the "Restore" button and let the restore process finish completely (wait until your iPhone shows up in iTunes again before doing anything else with your phone).
Once the restore was complete, I was extra cautious and powered off then powered on my phone. Finally, I went ahead and plugged it back into my MBP and made sure that the phone showed up in iTunes.
Following all of that, I launched the App Store on my iPhone again, entered the password for my Apple ID and updating apps, installing new apps, and installing previously purchased apps from iCloud all worked again.
Please note that this process is much different than just simply clicking the "Restore" button on your iPhone's homepage in iTunes. That will prompt you to backup your phone, completely restore it to factory defaults, and, then require you to restore from backup to get all your settings and such back. This is not the route I took - I simply restored from an existing backup. I want to make sure that this point is clear. Although, if restoring from an existing backup does not solve the issue at first, then perhaps a restore to factory defaults followed up with a restore from a backup will do the trick, too. I just did not want to waste my time taking the much longer route first and was happy to find my iPhone's App Store working again by simply restoring my phone using an existing backup.
I have seen a lot of posts regarding this issue in the support communities, with none of them having an answer (even after calling Apple Support). I hope this helps anyone else that has had, is having or will have the same issue! Feel free to post comments regarding other solutions you have found for the same issue - let's have one discussion where all possible solutions can be posted so iPhone users do not have to sort through a bunch of unhelpful discussions just to find a solution that was not yet documented (like I had to).See:
Well known TCP and UDP ports used by Apple software products
Also see:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
I have a Creative Cloud subscription for Photoshop CC. All Creative Clouds products are updated to the latest versions. When I tried to install Tony Kuyper's TKActionv3 Photoshop extension using the Adobe Extension Manager CC on my PC desktop, I received an error message that the extension contained an invalid signature and wouldn't be installed. I had previously installed the extension on my laptop without any problems. At the same time, I also noticed the default installed Photoshop CC extensions (e.g., Adobe Exchange, Kuler, Mini Bridge, Behance) could not be loaded using the Windows/Extension command. I receive an error message that the command could not be completed because the extension could not be loaded. After contacting Tony Kuyper, he suggested that I try the steps mentioned in the following weblink: https://forums.adobe.com/message/6029768. The steps basically consist of uninstalling and reinstalling all the Creative Cloud apps associated with Photoshop CC. I tried the steps multiple times, but I am still having the same problems. I can find the default installed Photoshop CC extensions on my machine, so I don't know why they can't be loaded.
Thanks for your assistance,
Mark CurtisHi Mark
You say everything is up to date? And you have tried reinstalling all the CC apps? Is Windows also fully up to date? Hmmm... That could be tricky.
What version of Windows are you using? Have a look in Task Manager > Processes and see if 'CEPServiceManager.exe *32' is listed as running?
If not, I don't know where it would be installed from, and we'd need someone like Chris Cox to join the thread to tell us, but my guess is that it would install along with the CC Desktop Application Manager. Windows 8.1 can be problematic, and a bit fussy about the order of things, and it is definitely worth adopting best practice when installing your CC apps. That means restarting your computer, and right clicking the Desktop Application manager and running as Administrator.
How many CC apps are you running? If just Photoshop, Bridge, Expansion manager etc. then - and I hate to say this - perhaps have another go at reinstalling, but run the Cleaning tool after uninstalling.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Try some other Extensions before the Tony Kuyper's TKActionv3. GuideGuide is a favourite of mine, as well as Dmonzon tools, and maybe Russell Brown's Flypaper Textures.
I have to say that I have had problems with the CC Extension Manager a while back, but simply reinstalling just the Extension Manager fixed it. Perhaps CEPServiceManager.exe *32 installs with Extension Manager? Heck, maybe start with just trying that before reinstalling all your CC apps.
If you are still stuck, I'd risk sending Chris Cox a PM, but not until you triple check that your video card driver is up to date from the card maker's website.
Good luck, and be sure to let us know how you get on. -
I am reinstalling W7 on my iMac and keep getting the black screen. I had installed W7 before when using Snow Leapord but W7 doesn't want to install with the latest drivers (v4.0). W7 was working with Lion but I had to uninstall W7 and now I cannot reinstall.
NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe -
I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install the upgrade without using the cd?
PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
How to install snow leopard without using the dvd drive?
Is it possible to install snowleopard without using the dvd ? i have a macbook and i have unfortunatly broken the cd and dvd player..
Yes you can.
How to use Migration Assistant:
http://support.apple.com/kb/HT4889?viewlocale=en_US
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Maybe you are looking for
-
I want to fill in a survey that was sent to me without having it add all the spaces, can I do this?
i am trying to fill out a survey without having spaces added when I type, can someone help me?
-
How to start a database by copying the files(tablespace, redo, ctl files)
Hi, I have two databases called Q1 and Q2. I am planning to copy from a cold backup files from Q1 to Q2 database. could anybody will provide the steps involved in how to copy from one database to another and how to rename the target database after co
-
Time Machine taking forever to backup
I am using a mid 2009 MBP running OSX 10.9 and my TC is model A1355. I've been noticing the past week or so it hase been taking extra long to back up. I am backking up over Wifi which is what I've always done and have never had this problem. Not sure
-
Oracle Hyperion system 9 Version 9.3.1 Licensing
How does Oracle Hyperion system 9 Version 9.3.1 Licensing work? What controls or limits the number of users now hat there is no licence file needed?
-
How can we archive Partioning in parent child tables in Normalised way.
Hi Friends. Could you please suggest me How can we archive Partioning in parent child tables in Normalised way. Bill_parent( Bill_no number, Bill_date date .-- I want to create Partition on this column customer_id Bill_Child{ bill_no number, Bill_c_n