No option to reformat during Windows XP installation under Boot Camp

Ok, I just purchased Windows XP Professional SP2 to install on my Macbook Pro via Boot Camp. I first attempted to install it last night, and ran into a variety of issues.
I went into Boot Camp Assistant, printed out the instructions, and read them carefully. I continued on to designate the size of my Windows partition, which I adjusted to 45gbs. Then I created the partition with no difficulty whatsoever. After this I inserted my Windows installation disk and restarted the computer. Upon restart, however, the computer ejected the Windows disk before the computer even got past the grey screen. I reinserted the disk and the blue installation screen appeared successfully. It came to a screen that asked me what partition I wanted to use to install Windows, and I chose Partition C (titled something like "BOOTCAMP PARTITION FAT32"). The size of this partition was 45 gbs, so I know I chose the correct partition. Now this is where I ran into my biggest problem. *After I chose my partition, I am given no option to reformat the partition. It just skips that step entirely and continues on to the installation screen.* Windows installs and restarts the computer, only to bring my to the dreaded black screen with "Disk Error" on it. I know it brings me to this screen because I did not reformat my partition. The problem is, I'm never given the option to reformat the partition during the installation.
I have tried deleting my Windows partition and creating a new one (this time 32gb), and I get the same issue. It simply does not give me the option to reformat.
I've googled this and discovered that many other Mac users have ran into this same issue. _I've also discovered that the majority of feedback they receive is that they need to reformat the drive, but this is the problem: we can't. We are not given the option._ I have no idea what to do. Please help.

I just went through the same problem you are experiencing right now. I bet you are trying to install OEM version of windows. I used an old windows upgrade and ran the repair, which brings you to the command prompt c:, run "FORMAT C: /FS FAT32" . Once this is done go back and reinstall your Windows XP OEM. Works like a charm.

Similar Messages

Fat32 External Hard Drive does NOT mount on Windows XP Pro under boot camp

I have a gateway 160gb portable external HDD. When it came pre-formatted in NTFS. It mounted on Windows XP under boot camp or Vmware Virtual machine very well.
I then formatted it under HFS+ to use it with superduper.
Now that I want to convert it back to NTFS. I formatted it under Fat32 so that windows can recognize it and I can format it again under NTFS.
The drive mounts fine on Mac OSX leopard but not on Windows XP (bootcamp or Vmware VM). Could someone help? I need this drive to be under NTFS so that I can store work related files which can only be run on Windows and some of the files are larger than 4gb.
Thank you

Under Disk Utility>Partition select anything other than 'Current' under 'Volume Scheme', then the format field will light. However, you should have been able to format under Windows Disk Management once it was online. See:
http://www.microsoft.com/windowsxp/using/setup/tips/advanced/ntfs.mspx

Unable to boot mac OS X Lion after windows 7 installation using boot camp!

Hi,
I'm first time mac user & recently bought the latest entry level mac mini model 2.3GHz 599$ (http://www.apple.com/macmini/specs.html).
The machine by default came with OS X Lion.
I was trying to install genuine windows 7 on my mac mini using boot camp. I had the windows installation CD the download part for windows support software was taking too long & I foolishly skipped this crucial part set aside 70GB for win7 & continued the installation. The windows installation was done successfully with no machine specific drivers installed yet. I thought I would get some grub like thing to select OS at boot time but everytime it boots to windows. Is it since I missed downloading/installing windows support software? Please help me out to get my mac back
I've not done much of googling to troubleshoot it but bit of nervous for my foolishness at skipping that downloading part.

That was quite dumb question, the RTFM issue
Booted from macintosh HD at startup & removed the windows installation.

Trouble installing Windows 8.1 with Boot Camp

I'm having an issue installing Windows 8.1 under Boot Camp on one of the new MacBook Pros (late 2013). After sever troubles (and not a few tribulations) fighting with the stupid Windows installer program (couldn't Microsoft just let me download a freakin' ISO?) I got the installer running after creating the partition, but at the end of the Windows install, I get:
Windows could not update the computer's boot configuration. Installation cannot proceed.
Googling around for a solution I found several references to UEFI problems, along with a couple different procedures that were claimed to work. Unfortunately, these procedures were pretty lengthy and require several third party tools -- and I'm not positive they're even applicable because none of them dealt with the newest model of MacBook Pro.
So, can anyone out there point me towards a procedure that's known to work with the new models?
Thanks.

OK... Finally solved the problem during my winter break... took almost 1.5 months Actually we users are creating the problem... Bootcamp is OK... our late 2013 Mac is OK... but Apple is't as it's not giving us the solution Now let me clear concisely what actually occurs behind the problem.
When you open bootcamp to install Windows, you get a popup window. Then you click continue... then you choose the options among the three which suits to your intention. Then if you chose to create a installation disk or/and download the Windows Support Software, bootcamp does so. Then the nextPROBLEMETIC STEP comes! Yes! you got it! This step creates the actual problem: Partitioning the hard disk for installing Windows. Before bootcamp starts partitioning, a simple POPUP WINDOW will inform you whether you will get the f*cking "Windows could not update the computer's boot configuration. Installation cannot proceed" message or not during your windows installation! Andddd... the popup window is here:
Soooo... super duper simple fact: if you don't get this popup window, you're going to get that error. Because this HELPER TOOL will simulate proper environment for installing Windows in your Mac
Now be sure:
1. You just have one partion in your Hard Disk before partitioning it into two for installing Windows
2. This PARTITIONING SHOULD ONLY BE DONE BY BOOTCAMP if you want your Windows in EFI mode. The way jarvil told us is for BIOS mode. I'm not going to explain here what is EFI and what is BIOS. Simply keep in mind that EFI is latest, better and faster for booting your Windows
That's it guys! If you don't get that popup window, follow the instructions:
1. Turn your hard disk into a single partition by using Bootcamp/Disk Utility. Bootcamp is recommended
2. Take a flash drive, format it, and then open Bootcamp
3. Choose all the three options:
     Create a Windows 7 or later vertion install disk
     Download the latest Windows Support software from Apple
     Install or remove Windows 7 or later version
Yes! We are going to create a new installation disk...
4. I know you are clever enough to guess what should you do now! Just enter your password when you get THAT SPECIAL POPUP WINDOW!Then Mac will restart after partitioning your hard disk!
5. Do noting untill the windows installation window comes
6. Go forward pressing Next, putting serial, and accepting the agreement that we never read
7. Select advanced installation... I mean the second option
8. Now find the partition named BOOTCAMP
9. Select it and Format it!
10. Click Next
You are done! Your Mac will install windows without any problem or error message After installation, if you find that your drivers aren't working, go to the installation disk and open the folder named BOOT CAMP. Open the exe named Setup... Install the drivers and restart after completion... Your Mac now owns Windows in EFI mode like mine!
That's all I have known killing my winter break! Thanks everyone! Take care!

Resolve trouble between Parallels and Windows under Boot Camp

After seeing several threads relating to this issue, I decided to make this it's own thread instead of trying to reply to each. hopkinsvscloudlivestream.blogspot.com/2013/03/watch-hopkins-vs-cloud-live-stream-2013.html This article NOW resolves all issues pertaining to using Windows under Boot Camp through Parallels, INCLUDING activation. Hopefully Parallels will be able to integrate these fixes into a future release.
Before doing anything, I would recommend preparing your existing Windows installation under Boot Camp, for Parallels, before trying to access it through Parallels. If you have already installed Parallels and now have problems, don't worry, this article should address and resolve these issues as well.
Something to know upfront: using your existing Boot Camp installation with Parallels will most likely require you to activate your Windows installation a second time. The reasons for this are addressed in Section 4 of this article.
Section 1: Preparing your Boot Camp Installation for Parallels
(If you already tried to access your Boot Camp installation through Parallels, and can no longer get into Windows through Boot Camp or Parallels, please skip this step and come back to it after you have completed Section 2.)

Personally, I think the software fix is a band-aid for a larger hardware problem, probably involving the power management circuitry. I think the reason Photo Booth and QuietMBP and Windows XP all work to silence the noise is because they draw more power by using more CPU, and it's the extra power draw that kills the noise. Nothing scientific, mind you, just a hunch.
What if your speakers made an annoying hum that went away whenever you started playing music through them in iTunes? Would you still think it's a software problem? I think it's a similar situation here - where software can cover up the issue but not really fix it...

Latest Windows 8.1 update under Boot Camp loses my cursor

I was having no problems running Windows 8.1 under Boot Camp on my MacBook Pro Retina (2012) with the latest Boot Camp drivers until I tried downloading Microsoft's latest major update to Windows 8.1 (KB2919355). After installing the update, I lost my cursor. The trackpad and a USB mouse both "worked" by highlighting icons and windows at random, but without a cursor I'm flying blind. It seems to be a video or screen driver issue. I chatted with Apple and spoke to Microsoft on the phone. They both suggested that I uninstall the update, which I have done. And that does bring back my cursor. The only hope is that Apple and Microsoft can work out this problem between the Apple drivers and the Microsoft update. I understand that this latest Microsoft update is a prerequisite for future Microsoft updates, so I hope they straighten this out. Is anyone else suffering from this problem?

Hi
I have exactly the same problem on my MacBook Pro Retina (early 2013). After updating from Windows 8 to Windows 8.1 (KB2919355) the mouse cursor is invisible on the desktop. On the Lockscreen and Sign In screen the cursor is visible. My resolution is 1920x1200. I connected also another "normal" mouse device and I have the same effect.
When starting Windows in Safe mode the cursor is visible. When uninstalling the update KB2919355 everything works again.
See also http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_update/kb291 9355-makes-mouse-pointer-invisible/b9d014f1-9ec1-4faa-a046-7b96fcd66661 .
I use the latest version of BootCamp http://support.apple.com/kb/DL1720.
Thank you to solve this issue.

Accidently shut down my Mac Book Pro during Windows 7 installation . When re-starting it says "Press any key to boot from CD or DVD". But keybord is not working . and i have the windows CD inside the drive . Pls hlp me to boot the mac again .

I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot boot It and the CD is also in the drive . Please help me to boot back to Mac book Pro and give me a way to start the key bord .

Hey rudreshchoubey,
Thanks for the question. The following resource may help to resolve your issue:
Boot Camp Installation & Setup Guide
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
If Windows doesn’t install properly
Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Thanks,
Matt M.

HT3986 i get a black screen during windows 7 installation on bootcamp 5.0.1

i get a black screen during windows 7 installation on bootcamp 5.0.1 , it wont install

Hi wb2009,
I haven't found that the TV would be an issue, but did find an article that states to not have extra USB devices connected.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
The Windows installation may boot to a black screen with a blinking cursor. This can occur if you use a USB optical drive or USB Flash drive for the Windows installation and another USB device is also connected to the computer.
There's another article that mentions Windows XP or Vista that may apply.
Archived - Boot Camp: Start up to black screen after installing Windows
http://support.apple.com/kb/TS2600
Thank you for visiting Apple Support Communities.
Nubz

Windows 7 64 Bit Boot Camp install on iMac 27" (2010) without int. DVD drive

I have a current 27" iMac (bought last year) and the internal DVD drive doesn't work. It's new, has NEVER been used. I guess it's dust inside, but cleaning CDs didn't help. I don't want to bring or send my iMac to the Apple repair service because normally I don't need this internal DVD drive.
Hence I'm looking for alternative ways to install Windows 7/64 via Boot Camp. I have rEFIt-0.14 installed, an Original Windows 7 Retail-DVD (and a ISO image of it), an external USB DVD drive (Samsung), an external USB hard drive 160GB (LaCie), some USB flash drives (Kingston, 4GB) and a Windows PC.
I've read many threads about this problem, for example this:
https://discussions.apple.com/message/15002932 resp.
https://discussions.apple.com/message/15016734 (saying it SHOULD work!)
Hmmm... Some people succeeded in installling - other didn't. I've also read about that "Parallels way" - but I would prefer not to use Parallels.
Is any information missing...? What would you recommend? Thanks a lot!

It doesn't work! But others reported that it should!
I've tried it using the Original Windows 7 DVD and also
a bootable 4GB Kingston USB flash drive made
under Windows 7 as follows:
The rEFIt-0.14 boot menu lists the following options...
* Boot Mac OS from Macintosh HD
* Boot EFI\BOOTX64.EFI from EFISECTOR
* Boot Windows from CD
* Boot Legacy OS from EFISECTOR
... but nothing helps - I always get the message
"No bootable device -- insert boot disc and press any key"
and can only switch off my Mac.
What am I doing wrong?
Or will only that Parallels option work? (Last year when
I tried Parallels for the first time, the uninstall function
didn't work comprehensively and I had trouble removing
the Parallels installation completely from my system.)
Thanks for any help!!

Can't boot into Windows 7 after using Boot Camp

So I installed Windows 7 on a separate 70GB partition using Boot Camp. Everything seems fine, but once installation finished and the computer restarted for the final time, the computer shows the blinking "_" on the black screen and then promptly reboots and this cycle continues without end.

Sounds stuck at the Windows bootloader. It's not clear why. I would zap PRAM by holding command-option-p-r at the startup chime until you hear a 2nd startup chime. Let it boot back into Mac OS. Insert the Windows 7 install disk and reboot, holding down 'c'.
Read this, in particular the 3rd option below the screen shot To open the System Recovery Options menu using the Windows 7 installation disc or a USB flash drive, or a system repair disc

802.11ac not recognized on Windows 8.1 Pro under Boot Camp.

I just installed Windows 8.1 Pro under Boot Camp. The issue I am having is that the 802.11ac network is not recognized in Windows. Windows only recohnizes the 802.11n network. When I boot up OSX Yosemite, It works as usual. Anyone else have this problem?

8/8.1 will install fine but there's some stuff you need to do before starting to ensure no issues
purchase a retail 8/8.1 license
use only a USB2 flash drive
get a clean 8 or 8.1 ISO
newer machines are more selective with the ISO for some reason (ISOs that worked to install Windows on many different older Macs would not work)
if you've made lots of changes, hacks and adjustments trying to get this work on your own, you should clean install OSX first, do not restore from time machine and start at step 3 to get Windows installed, you can go back later and copy files back to OSX
if you want to try without clean installing OSX, here goes
open boot camp assistant (bca) and choose option 3 ONLY if it reads 'remove/delete' Windows
open disk utility (du) and confirm that your HD now only has 1 single partition ('macintosh HD' unless you've renamed it)
restart machine and do a PRAM reset
open du and repair permissions TWICE
open bca and choose all 3 options (create, download, install)
from here, the process follows the standard boot camp instructions (http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf) but pay attention to step 3 where you do have to manually reformat the boot camp partition
clean ISOs
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
if you are trying to clean install 8.1, google clean install 8.1 with windows 8 key for steps like this
http://forum.notebookreview.com/windows-os-software/735517-how-install-windows-8 -1-clean-your-windows-8-upgrade-key.html

Can windows 8.1 in boot Camp display in target display mode on an IMac?

I have given up on Windows 7 running in Boot Camp on my 15" MacBook Pro and displaying it on my 27" IMac via thunderbolt and Target Display Mode.
The FAQ concerning Target Dsiplay Mode farily clearly says Windows 7 won't work.
But it does not say Windows 8.1 will or will not drive Target Display Mode via thunderbolt.
see: http://support.apple.com/kb/HT5219, question 29
Has anyone found that running Windows 8.1 in BootCamp on a MacBook Pro Retina mid 2012 will display via a thunderbolt cable in to Target Display Mode on a late 2013 IMac 27"?
I don't want to go to the trouble of installing Windows 8.1 and trashing my otherwise functional Windows 7 Boot Camp installation unless it is going to display properly on my late 2013 27" IMac running OSX 10.9.3 via thunderbolt.
Thanks in advance!

no, tdm doesn't work under bootcamp regardless of which windows is being used, imho i don't think it will ever work under bootcamp

I bought macbook pro at cash america used and loaded with windows 7 ultimate by boot camp.My questions is it has mountain lion loaded but original ower has name with password so how can I reload so I can sign on as administrator for downloads and upgrades

I bought a 13 inch macbook pro9.2 at Cash America with windows 7 Ultimate with boot camp program.
The Mac op sytem has Mountain Lion installed but the previous ower has his name and password attached to it and can only use as guest.
My question is how do I get around this to be administrator to reload software so i can use mountain Lion,and not loose the windows op .

If you reformat the partition that contain Mountain Lion and reinstall Mountain Lion, it should not effect the Windows pratition.
Have said that I suggest you backup everything you might want to save just in case.
Allan

Install Windows 8.1 with Boot Camp

Greetings you all,
I've been trying to install WIndows 8(.1) on my MacBook Pro early 2011, but without any success. I downloaded the .ISO of Windows, stored it on my external HDD, downloaded the software via Boot Camp to host Windows (I'm sorry I'm french so I'll have to translate everything) and put it on another external HDD, and when I plug them to my Mac and start the installation of Windows, it doesn't detect the USB.
What should I do? If possible, avoiding any installation of the disk image on a DVD.
Thanks.

Hello Mickaelpopo,
Thank you for the question. It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro. Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
Which versions of Windows work with Boot Camp 5?
You can use:
Microsoft Windows 8.0 (64-bit)
Microsoft Windows 8.0 Pro (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
Windows 8.1 is not supported with Boot Camp 5.
You can find more information here:
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can't install windows 8.1 with boot camp

I'm trying to install windows 8.1 with boot camp and this is the message I keep getting. I've tried several times and every time I get this. I have a 2015 MacBook Pro. I've tried installing from a usb with ISO and also from a oem windows dvd. Any help would be appreciated.

Excellent.
Windows installation has four or five reboots, and the Apple BootManager tracks such reboots via the Mac NVRAM, otherwise the next reboot will cause OS X to boot rather than Windows. It is also used to set up some variables used to pass information to the CSM-BIOS layer. If an installation has failed, the variables do not reflect the current and clean state of the machine. A NVRAM reset will re-initialize these variables for the next attempt.

No option to reformat during Windows XP installation under Boot Camp

Similar Messages

Maybe you are looking for