No option to set tv signal in video

Trying to connect ipad2 to tv but there's no tv options in video setup in settings. The only thing I've got there is captioning and start playing. Please help!!

In the screen capture you provided earlier you say your Apple ID is listed below PJ O'CONNELL?
Because it's never done that for me and I don't know why you would want it to. 

Similar Messages

  • Set up Signal Express to log when there is a change in state of the inputs (NI USB-6501 logger)

    Hello NI Forum, I have recently purchased digital I/O logger NI USB-6501.  This arrived with Signal Express, which I intend to use as a Lite version.  I just wondered if it was possible to set up Signal Express to only add a log entry when there is a change in state of the inputs?  I have this working on a 0.1sec sample period and can interrogate the logs after recording.  Most of the time nothing will be happenning, I just wondered if there was a way to reduce the ammount of data captured?  Cheers.

    Ah that unfortunate, and yes start/stop conditions for loging are part of the Full version of SignalExpress
    Here's the comparision: http://www.ni.com/labview/signalexpress/purchasing-options.htm
    Sorry about that

  • IMovie '08 option to make the best quality video on a DVD using iDVD '08

    Which iMovie '08 option will make the best quality video on a DVD using iDVD '08?
    1. Share-Media Browser-Large-Publish
    2. Share-Export Using Quicktime
    3. Or can you use an unpublished iMove in iDVD?
    (Of course I'll have to first get iDVD to open without crashing...)

    Which iMovie '08 option will make the best quality video on a DVD using iDVD '08?
    1. Share-Media Browser-Large-Publish
    2. Share-Export Using Quicktime
    3. Or can you use an unpublished iMove in iDVD?
    As always, this depends on a number of factors which you failed to cover in your original question.
    1) If you source files are SD, other than an increased loss of time in converting you gain nothing in scaling the files up in iMovie '08 only to scale them back down in iDVD. On the other hand, if your source files are HD, then you will likely see a marginal increase in quality which may or may not be worth the price of increased processing time. In this latter case, you are allowing the MPEG-2 compressor to get the most it can out of your file at the P- and B-frame level.
    2) Export using QT allows you to customize your output with regard to both compression format and settings. For instance, you can use a codec with extremely high data rate (e.g., VGA dimensions with DV at 28.5-57.0 Mpbs, AIC at 18.0-22.0 Mbps, or even unlimited H.264/AAC at 16.0-20.0 Mbps). High video data rates generally translate to less lost quality during the re-compression process. Thus, if the intermediate file produced by iMovie '08 and passed on to iDVD retains more of its original quality, the MPEG-2 compressor can get more quality out of the final conversion as stated above.
    3) Since no physical file actually exists until the project (simply a set of instructions detailing how the final file will be created) is published, there is nothing to be physically sent to iDVD. basically you must create a physical file from the project in order to do anything at all whether sending it to a gallery, iTunes, YouTube, iDVD, etc.

  • I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library from all of my devices?

    I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library and songs from MY phone ?

    this is not a reply - i asked the question - still trying to learn how all this works - someone please HELP ME

  • My problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set sav

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/986549 /questions/986549]''
    my problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set save downloads to my e drive....but still firefox keeps saving them to my c drive....i have 4 internal hard drives in my rig....and have tried saving downloads to them all.......why this is happening i cant understand....i have tried lots of suggestions....and have re-installed firefox multiple times

    hello, there's a general regression in firefox 27 that won't allow files to download directly into a root drive. please try to create a subfolder (like ''E:\Downloads'') and set this as default location for downloads...
    also see [https://bugzilla.mozilla.org/show_bug.cgi?id=958899 bug #958899].

  • I'm setting up Apple ids, and its not giving me the option to set up a rescue email. How can I add one?

    I'm setting up Apple IDs, and its not giving me the option to set up a rescue email. I've set up Apple ID's in the past, and its always given me the option. How can I add a rescue email?

    You can find the instructions here. I removed the screenshots but the text is copied below.
    http://support.apple.com/kb/HT5312?viewlocale=en_US&locale=en_US
    You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
    Navigate to My Apple ID using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so. 
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.  

  • How can I sync my iPad to a computer after syncing it to the iCloud? I have the option of setting it up new, or restoring to a sync from many months ago. I dont want to lose any apps but I would like to back up on computer. No auto sync like other devices

    How can I sync my iPad to a computer after syncing it to the iCloud? I have the option of setting it up new, or restoring to a sync from many months ago. I dont want to lose any apps but I would like to back up on computer. No auto sync like other devices.

    Plug it into your computer. Tell it to sync with "this computer" instead of iCloud. You shouldn't have to remove any apps. Otherwise, you can save the app data by using i-FunBox ( http://www.i-funbox.com/ ) just go to the "devices" tab and select 'user applications' and select all of your apps and tell iFunBox to "copy to pc" you're done! You have them all backed up.

  • Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting Display on my mid 2012 MacBook Pro.

    Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting>Display on my mid 2012 MacBook Pro.
    I've rebooted all 3 devices, still does not work. Both Apple TV and MBP are on the same wifi. And the Apple TV AirPlay option is on. Can someone help? Thank you.

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Another solution is the Air Parrot.

  • My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low.

    My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low. How do i fix this????????????

    If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • Why in the layer options does not appear to me "video layers" why? help

    why in the layer options does not appear to me
    "video layers" why? help
    I need to encourage and not because my computer does not appear to me and others computers that has the same photoshop cc if that option appears. It would be helpful to know what thanks

    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked

  • Is it Possible to Insert Quiz Slides at Set Times During a Video?

    Hi all,
    I'm fairly new to Captivate, so I apologise in advance if this question has already been answered and I couldn't find it.
    I work in higher education and we create a lot of screencasts with academics speaking over Powerpoint presentations. During a presentation there is often several points where the academic would like to ask the user a question. What I want to know is if there's a way of adding question slides during a video?
    Many thanks,
    Ross

    You will have to split up that video to be able to insert slides in between.
    2015-04-23 16:42 GMT+02:00 Ross_P <[email protected]>:
        Is it Possible to Insert Quiz Slides at Set Times During a Video?
    created by Ross_P <https://forums.adobe.com/people/Ross_P> in *Adobe
    Captivate* - View the full discussion
    <https://forums.adobe.com/message/7470510#7470510>

  • No option to set search provider after updating Lu...

    Hi there, I have updated my Lumia to Win 7.8 and I have all new features but one is missing; option to set google as search provider in Internet explorer. I can't restore my phone to try install upate once again due to an error 801812E0. Any idea how to get Internet Explorer sorted?

    For WP8, it should be available under IE, settings>Advance settings> Default search provider. Don't know you have the same options. Best to check with the guys who just updated their phone to 7.8. Meanwhile, for the error code 801812E0:
    The reason for this error is that a previously installed software update is no longer compatible with your phone. In order to keep your phone working correctly, the restore function was disabled.
    For more info: see here

  • EE wifi Not giving me the option to set up on a galaxy s6?

    i just bought a samsung galaxy s6 and i when through the set up and it is not giving me the option to set EE wifi calling up? anyone had this problem?

    Where did you buy the phone.
    If not direct from EE you won't be able to use the WiFi Calling service

  • The option to set a limit on 'undo's has disappeared from preferences. How do I get it back?

    The first time I used AE, we had a power cut. The next time I opened the application I went to check my preferences and the option to set a limit on 'undo's has completely disappeared from the general preferences panel. Is the application damaged/corrupted?
    I tried uninstalling and reinstalling AE but the 'undo's limit is still missing...

    The preference for controlling the number of undo levels was removed in After Effects CC (12.1). The number of undo levels is 99, the maximum.
    I presume that the update was installed between the last time you changed this value and when you noticed the change.
    More information about what's new in After Effects CC (12.1) is here:
    http://blogs.adobe.com/aftereffects/2013/09/after-effects-cc-12-1-whats-new-and-changed.ht ml
    Information about what's new in After Effects CC (12.2) is here:
    http://blogs.adobe.com/aftereffects/2013/12/after-effects-cc-12-2-december-2013-update.htm l

  • HT1535 I wish to sync my iPad and PC on one direction. Just copy PC contents into my iPad. Is there any iTunes option that sets this feature ?

    I wish to sync my iPad and PC on one direction only. Just copy PC contents into my iPad. Is there any iTunes option that sets this feature ?

    How does this approach sound:
    On the iPad, go to Settings > General > Reset > Erase All Content and Settings
    That will strip your iPad of all its information.
    You can then sync your iPad to your computer using your computer's iTunes.

Maybe you are looking for

  • Using a text file to make a query

    Hello and sorry to disturb.. but as a newbie I hope to find solution to my problem... My users produce a text file that contains for each line an id (primary key). My goal is to let them easily use that file as a part of a query that I define. e.g. t

  • IOS 5 Photo App chrashes.

    iOS 5 Photo App chrashes. What can I do now. I also restored the iPhone. Please help me !!!

  • [SLD] Problems with Export

    Hi, I have to move from development to test-system, so I did an export of design objects and the admin import this file into the new system. He didn't create the Business Systems, Technical System, SWK or Product in SLD, so I thought I could do this

  • Picking list-default printer

    Hello Gurus, The issue is related to Picking List(EK00 condition type). Could you please provide me the path or Tcode for assigning the Default Printer to the Shipping Point. Regards, Kishore

  • Excise err while created OR

    D/ Friends, While creating OR error: u201CExc. Tax ind. Not maint. For 1  1- please maintain. Message No. 8I 004. Diagnosis: The excise tax indicator is not maintained for the specific combination. The indicator is needed to determined the excise dut