No options or links show in BPC Administration Page
After lauch the BPC Administration from the lauch page the page does not show any links or options. Does any body know why?
Hi,
The issue is resolved after following the note 1098427.
ASP .Net version has to be changed to 1.1.
Regards,
Nallasivam.D
Similar Messages
-
A few weeks ago, I asked the above question on why the form link shows up in 2 pages, but when the form is saved as PDF it comes up as 3 pages.
The answer I received was that I can simply select the page break and hit "delete" button or click on the trash can icon at the top right corner.
I tried to do this but, there is NO OPTION to select the page break and hit delete….
I want to combine the page on my PDF because the header takes up one entire page.
How can I do this? Can someone please help or walk me through this live?Wenlam,
There is NO OPTION to select the page break and hit delete….
Please see.
I want to combine these page because the header takes up one entire page.
How can I do this?
Trent
Thank you,
Trent
Trent R. Smock
602.359.2685
You want to improve? Interrupt your "old patterns."
Do something different. -
IWeb links show up on 'My Pages'
I am a first time user of iWeb.
The URL of my first web site is http://web.mac.com/siegle_family
All of my hyperlinks are manual, but some of them, on the last pages, do not have active links when I publish to .Mac.
Instead, they appear on the '.mac' main page under 'My Pages'. How can I remove the pages from there and make them work as regular hyperlinks?
thanks,
CortlandApple13
PowerMac Mac OS X (10.4.9) 2.5GHz, 1GBHi,
Thanks for this answer.
The links at the bottom were there by mistake, so I'm glad they gave you insight for your answer.
How can I remove the Navigation Bar area at the top of the page so that my links can appear at the top?
How can I move Navigation Bars? Sometimes they appear to move by themselves. There are no Navigation Bar on most of my other pages.
Thanks very much,
CortlandApple13
On this page
http://web.mac.com/siegle_family/iWeb/Our%20Spanish%20
Vacation/Valencia.html
Your links are showing up in two spots, did you
notice that? The ones at the bottom work fine.
The ones at the top are in the navigation bar area of
the page. Move them slightly up or down and they
should work.
PowerMac Mac OS X (10.4.9) 2.5GHz, 1GB
PowerMac Mac OS X (10.4.9) 2.5GHz, 1GB
PowerMac Mac OS X (10.4.9) 2.5GHz, 1GB -
This problems have happened ever since downloading 3.6.14. I downloaded the newest version of Shockwave Flash. I've disabled add-ons one at a time. Everything works in Safari, but I can't access email; trying to open links in other windows opens a blank page; no videos show up on YouTube or similar links. I trashed and downloaded Firefox again, but I'm still having the same problems.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode -
Import option is not showing the Data Source created using ODBC
Hi all,
I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
Can some one help me to understand the issue and to solve it.
Thanks,
MithunBy calling your cellular data provider.
-
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/783666]''
It used to work! Having made NO changes to my system / software but now, suddenly, when I type a search term in Google, I no longer get the option to show just "Images"only link on the left nav with the rest of the options like: View Videos, Books, Blogs etc. Nor the option to select what minimum size image I want to see. Works right in IE! (Shows "Images only" option) BUT I HATE IE!! PLLLLEASE HELP
[email protected]Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]] -
Dear Experts,
I Newly Installed SAP BPC 5.1 with SQL Server 2005.
When iam trying to open BPC Administration its showing a error message
"A dimension information file cannot be created. There may be a network or Security issue.Error Message: Empty Zip File"
And when iam trying to click on "Save to Server" & "Process Dimension" for Dimension is showing error message
"Split File Error"
Please help..
Thanks alot in advanceDoes this happen to multiple users? Multiple machines?
Maybe its the xceedzip problem...
Try and resolve by:
1. Obtaining the XceedZip.dll from the application server's
x:\bpc\websrvr\web\installation directory.
2. Copying and pasting that file to the client's x:\programs files\bpc
directory.
3. Registering the file on the client machine using regsvr32. -
HT5312 the forgot security answers option does not show up how do i find the answers
the forgot security answers option does not show up how do i find the answers
You need to contact Apple, either through the link in that article or by phoning them.
(77185) -
In Safari, the link to "mail this web page" doesn't work, and the share link shows "no service". Does anyone have a solution? I have a MacBook Pro and upgraded to Yosemite yesterday.
See here: If sharing options and Markup are missing after you install OS X Yosemite
This resolved the issue for me.
Rick -
Hi all,
This is my first time using this discussion site! Any help would be great, as I am getting very frustrated with pages!
What I am trying to do is link text at the bottom of a document to a page at the beginning of the document. I can't find a bookmark option adn when I clink insert link it only provides an options to link to a web page. Help! thanksBookmarks are missing (sadly) and with them, the ability to create an in document link.
I was looking for this feature in a Table of Contents. When you assign a 'style' to text in a document, you can Insert > Table of Contents. Then Pages will keep the TOC updated and you'll be able to 'link' from the page number in the TOC. (Not much help though, for the OP) -
? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .
Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl -
MSI GT 70 ONC: Stereoscopic 3D option doesn't show up in the NVidiaControl panel
Hi,
I have MSI GT 70 ONC Laptop with NVidia 670M (2GB) graphics card. I also have Sony Bravia 3D TV.
I can play 3d movies on laptop and can watch them on my 3d TV using HDMI cable fine although my laptop doesn't have 3d display.
I am trying to use my laptop which doesn't have 3D display but has Graphics card which supports 3D to play 3d games and see them on my 3D TV.
I checked online and found out that I need to change "Stereoscopic 3D" settings in NVidia control panel but Stereoscopic 3D option doesn't show up in the control panel. Very few options are there. I have updated drivers to the latest level but still can't see "Stereoscopic 3D" option in NVidia control panel. So will you be able to help me out what I can do to see the option? Thanks in advance.I have got an gs70. Exactly the same problem. Unfortunately this hdmi outputs are connected for the intel graphics cards. And intel does not support 3d.
I was actually very angry with MSI. Because they do not mention in the description. They promot just the gtx card. And forgot to mention about the hdmi connection.
Forget the 3d tv. Or you can buy an external mini pci-e graphics card adaptor.
search in google for : EXP GDC Beast Laptop External Independent Video Card Dock -
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
-
My ipod touch 4g doesn't show option for ios update in setting-general page. Can i update it via itunes by connecting it to computer?
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode ue one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipad is no longer showing all my vidoes, even though i have the option set to show all, even those that are in my cloud. Any suggestions??
Close the videos app and launch it again.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
if they still don't show up after you launch the app again, try resetting the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Maybe you are looking for
-
Hi all, I did all setting as per the note provided in sap - 191470 When using external mail, the following basic settings are required: 1. You must maintain an e-mail address in the address in the vendor master. 2. The same applies to your own user m
-
CRM 4.0 IC WINCLIENT - BP SEARCH NOT WORKING WITH IE7?
Hi All, We are running CRM 4.0, Interaction Centre is the WinClient. One of our users has Internet explorer 7.0 on his computer and we find that the BP SEARCH screen is blank on his computer. We get an error message: "document.FORM1.REGION' is null
-
ASCII format archives Vs Binary format archives
Hi, I need to know what is the difference between ASCII format archives and Binary format archives, and how can I create each one. Because in this moment I have created a bynary archive with output.format(), but i need the ascii format, so help me pl
-
SAP Short Dumps when generating BSP page
While generating my BSP page a short dump occurs saying that there is too much code basically. (more then 10,000 ABAP statments). This happens on my LAYOUT section of the screen and the weird thing is that I only have 2145 lines of code. A little ba
-
Library not showing up in iTunes
New Windows 7 computer; iTunes downloaded okay, but doesn't recognize my library either on my external hard drive(was original location noted in "preferences") or on the copy I made on the computer's hard drive (updated preferences). Tried re-loading