No oracle rdbms file found during PI 7.1 EHP1 installation

Dear all,
I am currently installating SAP EHP1 for SAP NetWeaver Process Integration 7.1.
I have filled out all preselections screens.
I have started the installation (enterred the key generated from SAP Solution Manager).
When I reach step 8 - Install database server software, I get this message box :
"no oracle rdbms file found".
Then, eitheir if I click on "OK" or "Cancel", I get the following message box :
"SAPinst now stops the installation" ....
Here, I normally have to start the oracle installation.
I go to /oracle/stage/112_64/database/SAP to start the ./RUNINSTALLER_CHECK
/oracle/stage/112_64 exist, but /database/SAP does not exist !!!
Any idea is very welcome
Best regards
SAP NetWeaverAdmin
Edited by: SAP NetWeaverAdmin on Nov 30, 2011 12:29 PM
Edited by: SAP NetWeaverAdmin on Nov 30, 2011 12:31 PM

Hello dear sap nw admin,
I've the same problem while installing systems with the latest sw provisioning manager 1.0 sp3
Have you solved your problem by just downloading the latest installation master or have you also updated the rdbms dvd?
Kind regards
Roland

Similar Messages

Problems with SAPUSER Table / ORA-1403 during PI 7.1 EHP1 Installation

Hello,
as I have currently problems creating a customer message with the customer provided S-User and I need a solution after the easter weekend, I'll try my luck here...
We currently perform a SAP Netweaver PI 7.1 EHP1 installation on Windows 2008 (Enterprise)/ Oracle. The installation media were downloaded from SAPNet.
The Windows Server 2008 is completely udpated, no further patches are available.
The Windows system is patched according to note 1375494 (new SAP kernel does not work on Win2008 without).
Oracle 10.2.0.4 was installed previous to the installation.
During the installation the new independend and db-dependend kernel was provided.
First steps run smoth until Phase ABAP IMPORT. This one fails according to the logs because access to table SAPUSER is not possible:
     Compiled Jan 15 2010 23:56:22
     E:\usr\sap\PID\SYS\exe\uc\NTAMD64\R3load.exe -testconnect
     DbSl Trace: ORA-1403 when accessing table SAPUSER
     (DB) ERROR: db_connect rc = 256
     DbSl Trace: ORA-1403 when accessing table SAPUSER
     (DB) ERROR: DbSlErrorMsg rc = 99
I already checked the OPS$ mechanism. Starting SQLPlus /nolog and login with "connect /as sysdba" works as intended.
i.e. "select owner from dba_tables where table_name = 'SAPUSER';" shows:
     OWNER
     O$HERDER_DOMAIN\PIDADM
Which is ok, the Domainname and SID is correct.
"select * from "O$HERDER_DOMAIN\PIDADM".SAPUSER;" show:
     no rows selected
Comparing this to another recently installed system there should be something like this:
     USERID
     PASSWD
     SAPSR3-CRYPT
     V01/0050ZctvSB67Wv2haiQTDrO5P5c7Ks/kyqpdQ7jDbQ==
But I'm not really sure, if this entry should be there at this installation phase.
If so, how is this entry created? Note 50088 describes how to handle this, but with other USERID and without encrypted PASSWD.
I have no idea, why this happens, I recently installed 2 ECC systems and 1 Solution Manager systems and had no problems installing them.
I already exchanged the control.xml according to note 1249469.
I cannot find any note for this situation, so please ... is there anyone out there with an idea?
Best regards
Christian Reitz

Hi,
thanks for the answer... as I read your answer, I had some doubt, and unfortunately I was right.
Altering the users PW does not write into the SAPUSER table... why should it? Altering an oracle user does not effekt this SAP table.
In the meantime I started from scratch. Complete new installation of Win2008, patching, etc.
... same issue.
I don't know, why this happens... I cannot find another hint what happend before, when the user should be added into the table.
Any ideas? Anyone?
Thanks for help in advance.
Christian

Oracle-rdbms-server-11gR2-preinstall withOUT Unbreakable ?

In the Oracle Linux 5 (RHEL 5) world, we used to install an “oracle-validated” RPM to prep a box for the database software, as well as the middleware. It sets some tuneables, loads some dependencies and other good housekeeping.
In the Linux 6 world, it appears that we now are supposed to use the “oracle-rdbms-server-11gR2-preinstall” RPM, but this also installs the Unbreakable kernel. Is there any such version of this RPM that will keep the RH Compatible kernel?
see https://blogs.oracle.com/linux/entry/oracle_rdbms_server_11gr2_pre for other details.
Thanks!
-PH

I think I just solved this issue... I was blindly installing the repo's per the link (http://public-yum.oracle.com/) - when I edited the
/etc/yum.repos.d/public-yum-ol6.repo file, and turned off ol6_UEK_latest (by setting enabled=0 for that stanza), I did yum clean all, and let it rip - it looks like I stayed with the RedHat Compatable version.. sorry for the long post, but see the bold in the beginning and end of the following...
*[root@Steve-Test-rh6 yum.repos.d]# yum clean all*
Loaded plugins: refresh-packagekit, rhnplugin
Cleaning repos: ol6_latest rhel-x86_64-server-6
Cleaning up Everything
*[root@Steve-Test-rh6 yum.repos.d]# yum install oracle-rdbms-server-11gR2-preinstall*
Loaded plugins: refresh-packagekit, rhnplugin
ol6_latest | 1.4 kB 00:00
ol6_latest/primary | 22 MB 00:23
ol6_latest 17992/17992
rhel-x86_64-server-6 | 1.8 kB 00:00
rhel-x86_64-server-6/primary | 11 MB 00:03
rhel-x86_64-server-6 8588/8588
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package oracle-rdbms-server-11gR2-preinstall.x86_64 0:1.0-6.el6 will be installed
--> Processing Dependency: kernel-uek for package: oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
--> Processing Dependency: gcc-c++ for package: oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
--> Processing Dependency: gcc for package: oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
--> Processing Dependency: libaio-devel for package: oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
--> Processing Dependency: libstdc++-devel for package: oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
--> Processing Dependency: glibc-devel for package: oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
--> Processing Dependency: compat-libstdc++-33 for package: oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
--> Processing Dependency: ksh for package: oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
--> Processing Dependency: compat-libcap1 for package: oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
--> Running transaction check
---> Package compat-libcap1.x86_64 0:1.10-1 will be installed
---> Package compat-libstdc++-33.x86_64 0:3.2.3-69.el6 will be installed
---> Package gcc.x86_64 0:4.4.6-4.el6 will be installed
--> Processing Dependency: cpp = 4.4.6-4.el6 for package: gcc-4.4.6-4.el6.x86_64
--> Processing Dependency: cloog-ppl >= 0.15 for package: gcc-4.4.6-4.el6.x86_64
---> Package gcc-c++.x86_64 0:4.4.6-4.el6 will be installed
--> Processing Dependency: libmpfr.so.1()(64bit) for package: gcc-c++-4.4.6-4.el6.x86_64
---> Package glibc-devel.x86_64 0:2.12-1.80.el6_3.5 will be installed
--> Processing Dependency: glibc-headers = 2.12-1.80.el6_3.5 for package: glibc-devel-2.12-1.80.el6_3.5.x86_64
--> Processing Dependency: glibc-headers for package: glibc-devel-2.12-1.80.el6_3.5.x86_64
---> Package kernel-uek.x86_64 0:2.6.32-300.32.3.el6uek will be installed
--> Processing Dependency: kernel-uek-firmware = 2.6.32-300.32.3.el6uek for package: kernel-uek-2.6.32-300.32.3.el6uek.x86_64
---> Package ksh.x86_64 0:20100621-16.el6 will be installed
---> Package libaio-devel.x86_64 0:0.3.107-10.el6 will be installed
---> Package libstdc++-devel.x86_64 0:4.4.6-4.el6 will be installed
--> Running transaction check
---> Package cloog-ppl.x86_64 0:0.15.7-1.2.el6 will be installed
--> Processing Dependency: libppl_c.so.2()(64bit) for package: cloog-ppl-0.15.7-1.2.el6.x86_64
--> Processing Dependency: libppl.so.7()(64bit) for package: cloog-ppl-0.15.7-1.2.el6.x86_64
---> Package cpp.x86_64 0:4.4.6-4.el6 will be installed
---> Package glibc-headers.x86_64 0:2.12-1.80.el6_3.5 will be installed
--> Processing Dependency: kernel-headers >= 2.2.1 for package: glibc-headers-2.12-1.80.el6_3.5.x86_64
--> Processing Dependency: kernel-headers for package: glibc-headers-2.12-1.80.el6_3.5.x86_64
---> Package kernel-uek-firmware.noarch 0:2.6.32-300.32.3.el6uek will be installed
---> Package mpfr.x86_64 0:2.4.1-6.el6 will be installed
--> Running transaction check
---> Package kernel-uek-headers.x86_64 0:2.6.32-300.32.3.el6uek will be installed
---> Package ppl.x86_64 0:0.10.2-11.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
oracle-rdbms-server-11gR2-preinstall
x86_64 1.0-6.el6 ol6_latest 15 k
Installing for dependencies:
cloog-ppl x86_64 0.15.7-1.2.el6 ol6_latest 93 k
compat-libcap1 x86_64 1.10-1 ol6_latest 17 k
compat-libstdc++-33 x86_64 3.2.3-69.el6 ol6_latest 183 k
cpp x86_64 4.4.6-4.el6 ol6_latest 3.7 M
gcc x86_64 4.4.6-4.el6 ol6_latest 10 M
gcc-c++ x86_64 4.4.6-4.el6 ol6_latest 4.7 M
glibc-devel x86_64 2.12-1.80.el6_3.5 ol6_latest 970 k
glibc-headers x86_64 2.12-1.80.el6_3.5 ol6_latest 600 k
kernel-uek                      x86_64 2.6.32-300.32.3.el6uek ol6_latest 21 M
kernel-uek-firmware             noarch 2.6.32-300.32.3.el6uek ol6_latest 3.0 M
kernel-uek-headers              x86_64 2.6.32-300.32.3.el6uek ol6_latest 714 k
ksh x86_64 20100621-16.el6 ol6_latest 684 k
libaio-devel x86_64 0.3.107-10.el6 ol6_latest 13 k
libstdc++-devel x86_64 4.4.6-4.el6 ol6_latest 1.5 M
mpfr x86_64 2.4.1-6.el6 ol6_latest 156 k
ppl x86_64 0.10.2-11.el6 ol6_latest 1.3 M
Transaction Summary
================================================================================
Install 17 Package(s)
Total download size: 49 M
Installed size: 147 M
Is this ok [y/N]: y
Downloading Packages:
(1/17): cloog-ppl-0.15.7-1.2.el6.x86_64.rpm | 93 kB 00:00
(2/17): compat-libcap1-1.10-1.x86_64.rpm | 17 kB 00:00
(3/17): compat-libstdc++-33-3.2.3-69.el6.x86_64.rpm | 183 kB 00:00
(4/17): cpp-4.4.6-4.el6.x86_64.rpm | 3.7 MB 00:03
(5/17): gcc-4.4.6-4.el6.x86_64.rpm | 10 MB 00:11
(6/17): gcc-c++-4.4.6-4.el6.x86_64.rpm | 4.7 MB 00:05
(7/17): glibc-devel-2.12-1.80.el6_3.5.x86_64.rpm | 970 kB 00:01
(8/17): glibc-headers-2.12-1.80.el6_3.5.x86_64.rpm | 600 kB 00:00
(9/17): kernel-uek-2.6.32-300.32.3.el6uek.x86_64.rpm | 21 MB 00:21
(10/17): kernel-uek-firmware-2.6.32-300.32.3.el6uek.noar | 3.0 MB 00:03
(11/17): kernel-uek-headers-2.6.32-300.32.3.el6uek.x86_6 | 714 kB 00:00
(12/17): ksh-20100621-16.el6.x86_64.rpm | 684 kB 00:00
(13/17): libaio-devel-0.3.107-10.el6.x86_64.rpm | 13 kB 00:00
(14/17): libstdc++-devel-4.4.6-4.el6.x86_64.rpm | 1.5 MB 00:01
(15/17): mpfr-2.4.1-6.el6.x86_64.rpm | 156 kB 00:00
(16/17): oracle-rdbms-server-11gR2-preinstall-1.0-6.el6. | 15 kB 00:00
(17/17): ppl-0.10.2-11.el6.x86_64.rpm | 1.3 MB 00:01
Total 901 kB/s | 49 MB 00:55
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY
Retrieving key from http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
Importing GPG key 0xEC551F03:
Userid: "Oracle OSS group (Open Source Software group) <[email protected]>"
From : http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : mpfr-2.4.1-6.el6.x86_64 1/17
Installing : libstdc++-devel-4.4.6-4.el6.x86_64 2/17
Installing : cpp-4.4.6-4.el6.x86_64 3/17
Installing : ppl-0.10.2-11.el6.x86_64 4/17
Installing : cloog-ppl-0.15.7-1.2.el6.x86_64 5/17
Installing : kernel-uek-headers-2.6.32-300.32.3.el6uek.x86_64 6/17
Installing : glibc-headers-2.12-1.80.el6_3.5.x86_64 7/17
Installing : glibc-devel-2.12-1.80.el6_3.5.x86_64 8/17
Installing : gcc-4.4.6-4.el6.x86_64 9/17
Installing : gcc-c++-4.4.6-4.el6.x86_64 10/17
Installing : compat-libstdc++-33-3.2.3-69.el6.x86_64 11/17
Installing : libaio-devel-0.3.107-10.el6.x86_64 12/17
Installing : kernel-uek-firmware-2.6.32-300.32.3.el6uek.noarch 13/17
Installing : kernel-uek-2.6.32-300.32.3.el6uek.x86_64 14/17
Installing : ksh-20100621-16.el6.x86_64 15/17
Installing : compat-libcap1-1.10-1.x86_64 16/17
Installing : oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64 17/17
Verifying : glibc-devel-2.12-1.80.el6_3.5.x86_64 1/17
Verifying : compat-libcap1-1.10-1.x86_64 2/17
Verifying : ksh-20100621-16.el6.x86_64 3/17
Verifying : glibc-headers-2.12-1.80.el6_3.5.x86_64 4/17
Verifying : gcc-4.4.6-4.el6.x86_64 5/17
Verifying : kernel-uek-firmware-2.6.32-300.32.3.el6uek.noarch 6/17
Verifying : libaio-devel-0.3.107-10.el6.x86_64 7/17
Verifying : oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64 8/17
Verifying : gcc-c++-4.4.6-4.el6.x86_64 9/17
Verifying : cloog-ppl-0.15.7-1.2.el6.x86_64 10/17
Verifying : libstdc++-devel-4.4.6-4.el6.x86_64 11/17
Verifying : compat-libstdc++-33-3.2.3-69.el6.x86_64 12/17
Verifying : kernel-uek-headers-2.6.32-300.32.3.el6uek.x86_64 13/17
Verifying : mpfr-2.4.1-6.el6.x86_64 14/17
Verifying : cpp-4.4.6-4.el6.x86_64 15/17
Verifying : ppl-0.10.2-11.el6.x86_64 16/17
Verifying : kernel-uek-2.6.32-300.32.3.el6uek.x86_64                   17/17
Installed:
oracle-rdbms-server-11gR2-preinstall.x86_64 0:1.0-6.el6
Dependency Installed:
cloog-ppl.x86_64 0:0.15.7-1.2.el6
compat-libcap1.x86_64 0:1.10-1
compat-libstdc++-33.x86_64 0:3.2.3-69.el6
cpp.x86_64 0:4.4.6-4.el6
gcc.x86_64 0:4.4.6-4.el6
gcc-c++.x86_64 0:4.4.6-4.el6
glibc-devel.x86_64 0:2.12-1.80.el6_3.5
glibc-headers.x86_64 0:2.12-1.80.el6_3.5
kernel-uek.x86_64 0:2.6.32-300.32.3.el6uek
kernel-uek-firmware.noarch 0:2.6.32-300.32.3.el6uek
kernel-uek-headers.x86_64 0:2.6.32-300.32.3.el6uek
ksh.x86_64 0:20100621-16.el6
libaio-devel.x86_64 0:0.3.107-10.el6
libstdc++-devel.x86_64 0:4.4.6-4.el6
mpfr.x86_64 0:2.4.1-6.el6
ppl.x86_64 0:0.10.2-11.el6
Complete!
*[root@Steve-Test-rh6 yum.repos.d]# cat /etc/redhat-release*
Red Hat Enterprise Linux Server release 6.3 (Santiago)
*[root@Steve-Test-rh6 yum.repos.d]# lsb_release -d*
Description:    Red Hat Enterprise Linux Server release 6.3 (Santiago)
*[root@Steve-Test-rh6 yum.repos.d]#*
*[root@Steve-Test-rh6 yum.repos.d]# uname -r*
*2.6.32-279.11.1.el6.x86_64*
[root@Steve-Test-rh6 yum.repos.d]#
Edited by: 966042 on Oct 17, 2012 1:15 PM

Error in File name or class name not found during Automation operation: 'CreateObject'

Hello Team,
When I am trying to execute the below code i am getting the following error. Any help would be greatly appreciated.
Set oFSO = CreateObject("Scripting.FileSystemObject")
If Not oFSO.FolderExists(SavePath) Then
Set f = oFSO.CreateFolder(SavePath)
Else
End If
53 4/11/2014 12:27:22 PM Error:
Error in <NoName(4).VBS> (Line: 9, Column: 1):
File name or class name not found during Automation operation: 'CreateObject'
I have googled through the error and tried to re-register the scrrun.dll using regsvr32 eventhogh it is successfully registered, i am getting the following error. My PC is windows 7 32bit OS.
any help is greatly appreciated.

The following script class will write a log file entry. See if it will run for you.
The script is using a class object that you might not have seen before. A little intro: The top section is just for testing the class. Normally I just comment this out after the class is working well. It should run right way. I would save the vbs file in the editor, That way when you are using autoactpath or currentscriptpath variables they will be able resolve the paths.
Paul
Attachments:
LoggingCode_V2.VBS ‏5 KB

CR 2008 dependence files cannot be found during the web setup project build

Hi,
Please anyone who knows why dependence files cannot be found?
CR 2008 dependence files cannot be found during the web setup project build. Nevertheless, this problem did not prevent the project from being installed on the server but I need to know why it couldn't be found? while I'm having the latest service packs installed on my development machine (SP0, SP1, SP-Fix 1, 2, 3 and 4 including ClickOnce and Merge Modules).
The warning messages that I'm getting during the web setup project build.
Build started: Project: VMAComponentsLibrary, Configuration: Debug Any CPU
Starting pre-build validation for project 'VMASetup'
WARNING: Unable to find module dependency with signature 'MFCLOC.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'ATL.Policy.66332652_9C28_58B1_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'OpenMP.Policy.04B9F3B6_9645_7658_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'MFCLOC.Policy.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'ATL.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'CRT.Policy.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'MFC.Policy.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'MFC.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'CRT.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'OpenMP.1E507087_0819_45E0_FF1F_C8B3B9A1E18E'
Pre-build validation for project 'VMASetup' completed
Thank you.

Hi,
CR 2008 for VS has a merge module that will be copied to the C:\Program Files\Common Files\Merge Modules for example (CRRuntime_12_1.msm, CRRuntime_12_1_da.msm, CRRuntime_12_1_de.msm, u2026).
According to CR documentation in order to deploy a project which uses a crystal reports we have to including one or more of these files in the setup project (Merge Modules).
As I understand these files can help the setup project to know which dependence files are needed for the application to be deployed successfully with CR.
You mentioned
(The merge modules for Crystal Reports 2008 SP1 are dependent on the C++ library files from 2005 SP1.) I understood the above message.
But what did you mean by this? What are the merge modules that you are mentioning hear?
(I know this isn't what you want to hear but the merge modules just aren't available any other way. Microsoft doesn't have them available for download, and we are not permitted to make them available.)
Thanks.
Edited by: Sami Aljafer on Jun 15, 2009 9:37 PM

Class not found during deserialization of descriptor UserSession

I am using JDeveloper 3.1.1.2 (build 767) to deploy an EJB to Oracle 8.1.6 and I get the following error message....
Generating EJBHome and EJBObject on the server...
Class not found during deserialization of descriptor UserSession
*** Errors occurred while deploying the EJB to JServer ***
*** Deployment completed ***
I've tried
a) to deploy all the classes in the project,
b) create a new project step by step,
c) use 'deployejb' and I still get the same error...
Can anyone help? Thanks.

Yep, JDeveloper auto generates the <>.ejb and it is a binary file.
Seems a pretty specific error message....any help available from the JDev team??

Logical end-of-file reached during read operation

Hi,
Something strange happened to my Logic a couple of days ago - all of a sudden. When I start Logic up it gives me the following error message:
*Error reading/writing file “com.apple.logic.pro.cs”: Logical end-of-file reached during read operation.*
I have re-installed Logic, as well as updated it (8.0.2), I have repaired disk permissions in Disk Utility, and it still keeps popping up. I cannot get on with my projects and I have deadlines!
I found an IT support site, according to that I don't have enough space on my HD. However, I do... I'm confused, and desperately need help.
Thank you so much, I'm looking forward to hearing from somebody.
Agnes

I am not opening any files, just launching Logic.
I know. And when you launch Logic, it loads its preferences files - and it seems this is failing - most likely due to file corruption. So delete the file, as I said, and Logic should load fine.

Error in starting the service Oracle CSService not found

Hi all,
i am trying to install Oracle Enterprise manager grid control,
i am getting the following error message
"error in starting the service Oracle CSService not found"
when i checked in the "services.msc" the Oracle CSService is not started, so i tried to start the service, but its not starting and giving the error message as "error 3 system cannot find the path specified"
then i checked in the service properties, and the path is pointing to a different directory,
now i want to change this path to the correct oracle bin directory.
any views how to cnage/update this path in the services.msc, for "Oracle CSService"
Thanks alot.

Hi
i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
Thanks to all the viewers.

HOW DO YOU CONVET AN ORACLE DATABASE FILE TO A TXT FILE?

Is there a way in a program unit of a form to convert an ORACLE database file into TXT format? When the file gets created, I want to use the text file in a distribution list for sending email. My code in the program unit is:
Insert into THE_IMO_EMAIL
Select distinct imo_email from DS_POC
where imo_email is not null;
commit;
Table THE_IMO_EMAIL is a temporary table. The temporary table gets deleted everytime before records get inserted into it. There is only 1 item in the temporary table.
IMO_EMAIL VARCHAR2(55)
After the COMMIT I want to copy the contents out of the
THE_IMO_EMAIL into a TXT File.
How do I do this? What parameters do I need to use? Should I do this in another program unit?

can you be more clear on this
"DATABASE FILE" what is this? an RDBMS file and you need this in ASCII format. I am lost.

Restore from OSB. RMAN-06024: no backup or copy of the control file found

I backed up controlfile for standby on production server to OSB media:
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:15:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: EMGC (DBID=1838014073)
connected to recovery catalog database
RMAN>
RMAN> CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
BACKUP CURRENT CONTROLFILE FOR STANDBY tag 'stb_ctl';
RELEASE CHANNEL ch1;
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN> 2> 3> 4> 5> 6>
allocated channel: ch1
channel ch1: sid=1085 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 25-JAN-11
channel ch1: starting compressed full datafile backupset
channel ch1: specifying datafile(s) in backupset
including standby control file in backupset
channel ch1: starting piece 1 at 25-JAN-11
channel ch1: finished piece 1 at 25-JAN-11
piece handle=1em30ngu_1_1 tag=STB_CTL comment=API Version 2.0,MMS Version 10.3.0.2
channel ch1: backup set complete, elapsed time: 00:00:27
Finished backup at 25-JAN-11
released channel: ch1
RMAN> list backup of controlfile;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RMAN configuration parameters are successfully reset to default value
starting full resync of recovery catalog
full resync complete
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN>
On standby server I try to restore this control file but there is some trouble with restore... By the way I can delete that backup piece...
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:34:32 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: emgc (not mounted)
connected to recovery catalog database
RMAN> set DBID=1838014073;
executing command: SET DBID
database name is "EMGC" and DBID is 1838014073
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
crosscheck backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Crosschecked 1 objects
released channel: ch1
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
RESTORE CONTROLFILE FROM TAG 'STB_CTL';
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting restore at 25-JAN-11
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/25/2011 15:35:20
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
delete noprompt backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1480 1479 1 1 AVAILABLE SBT_TAPE 1em30ngu_1_1
deleted backup piece
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Deleted 1 objects
released channel: ch1
RMAN>

You cannot specify a tag for a standby control file.
read here
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1002594
Edited by: Adigozalov Gurban on Jan 25, 2011 2:14 PM

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Problems found during the EXPORT to specified keyin table.

Hi
I am getting this error in sending iDOC system( We have iDOC-XI-iDOC Scenario.) I tried to reregister the queues but still nothing is passing thru XI.
Thanks,
Manish

Acutally I am getting this DUMP in ST22.
<i><b>ShrtText                                                                                |
Problems found during the EXPORT to specified key in table.
What happened?
Error in ABAP application program.
The current ABAP program "CL_XMS_PERSIST================CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The table " " does not contain any data records with the specified key.
The system called the internal SAP database interface because it
expected to find such a key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"EXPORT_TABLE_UPDATE_CONFLICT" C
"CL_XMS_PERSIST================CP" or "CL_XMS_PERSIST================CM00W"
"INSERT_MSG_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_XMS_PERSIST================CP"
in "INSERT_MSG_ALL".
The main program was "SAPMSSY1 ".
The termination occurred in line 302 of the source code of the (Include)
program "CL_XMS_PERSIST================CM00W"
of the source code of program "CL_XMS_PERSIST================CM00W" (when
calling the editor 3020).
Source Code Extract
Line
SourceCde
272
IF lv_switch_mode = 2.
273
IF export_to_db_optimized = co_true.
274
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
275
EXPORTING
276
iv_kind        = 'P'
277
it_prop        = lt_prop
278
iv_switch_mode = lv_switch_mode
279
iv_msgguid     = clustkey-msgguid
280
iv_pid         = clustkey-pid
281
iv_vers        = clustkey-vers.
282
ELSE.
283
EXPORT lt_prop FROM lt_prop
284
TO DATABASE sxmsclup2(is) FROM wa_clup ID clustkey.
285
ENDIF.
286
ELSE.
287
IF export_to_db_optimized = co_true.
288
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
289
EXPORTING
290
iv_kind        = 'P'
291
it_prop        = lt_prop
292
iv_switch_mode = lv_switch_mode
293
iv_msgguid     = clustkey-msgguid
294
iv_pid         = clustkey-pid
295
iv_vers        = clustkey-vers.
296
ELSE.
297
EXPORT lt_prop FROM lt_prop
298
TO DATABASE sxmsclup(is) FROM wa_clup ID clustkey.
299
ENDIF.
300
ENDIF.
301
>>>>>
IF sy-subrc <> 0.                                         "#EC *
303
   m_syserr_raise 'PERSIST' 'MSGGUID_EXISTING'
304
                  clustkey-msgguid clustkey-pid
305
                  clustkey-vers ''.
306
lv_p1 = clustkey-msgguid.
307
lv_p2 = clustkey-pid.
308
lv_p3 = clustkey-vers.
309
310
RAISE EXCEPTION TYPE cx_xms_syserr_persist
311
EXPORTING id = cx_xms_syserr_persist=>co_id_msgvers_existing
312
p1 = lv_p1
313
p2 = lv_p2
314
p3 = lv_p3.
315
316
ENDIF.
317
318
319
320
table SXMSPRES (resources)
321
table SXMSPXRES (X-resources)
Internal notes
The termination occurred in the function "expOutDb" of the SAP
Basis System, specifically in line 3748 of the module
"//bas/640_REL/src/krn/runt/abexpo.c#8".
The internal operation just processed is "cmpr".
The internal session was started at 20060724051049.
Internal call code.........: " "
Key..................: " "
It is very likely that a constellation similar to the following applies:
Process 1:                               Process 2:
UPDATE x.   ==> NOT_FOUND
UPDATE x. ==> NOT_FOUND
INSERT x.   ==> ok
INSERT x. ==> DUPLICATE KEY
DELETE x.   ==> ok
UPDATE x. ==> NOT FOUND
+ DUMP
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
[0] DoStack2 ( 0x105a4f7c0, 0x0, 0x2d1b000, 0x100000000, 0x1, 0x0 ), at 0x100471a60
[1] CTrcStack2 ( 0x105a4f7c0, 0x0, 0x100000000, 0x2d1ac00, 0x2, 0x102d1ada4 ), at 0x100471610
[2] __1cQrabax_CStackSave6F_v_ ( 0x10303b400, 0x303b400, 0x103874d10, 0x101fcfce8, 0x100000000, 0x
[3] ab_rabax ( 0x1, 0x2d1ac00, 0x0, 0x100000000, 0x3873800, 0x100000000 ), at 0x100a7fa04
[4] __1cIexpOutDb6FppCpLLInJEXPO_MODE__i_ ( 0x2, 0xe82, 0xffffffffffffffff, 0x101f97a90, 0x2, 0x38
[5] __1cTwrite_data_compress6FkpnICONNE_WR_C_i_ ( 0xffffffff7fffb038, 0x1070, 0x1000, 0x10095fa9c,
[6] __1cMab_connwrite6FIIpHIpFp0pIppnHAB_DATA_ppv_ipFppCpLLInJEXPO_MODE__i_i_ ( 0x0, 0x4, 0x10302a
[7] __1cLexpo_export6F_v_ ( 0x0, 0x960000, 0x95f800, 0x0, 0x103847980, 0x1 ), at 0x10095aa20
[8] __1cIab_jexpo6F_v_ ( 0x0, 0x5b52800, 0xd0, 0x100000000, 0x1, 0x0 ), at 0x100952df4
[9] __1cIab_extri6F_i_ ( 0x100000000, 0x5a37800, 0x2f0, 0x1, 0x0, 0x5e ), at 0x10068ccf8
</b></i>

Unable to extract oracle.sar file in Linux

Hello all,
I am aware of installing sap components in windows platform but now as a first time i am installing in linux environment.
I am getting issues in oracle installation.
First i have installed Red hat linux 5 and started trying to install Oracle. In the source files of oralce (8.1.7.4) is sar file type, so I have downloaded the sapcar file from SMP for the linux platform but sapcar in SMP i can see the file type as exe file. I am not sure file type exe will support in linux.And also i made sure that owner and group have right access.
But still i tried by extracting the oracle.sar file but its throwing an error as bash. SAPCAR file not found.
I am sure --> I have placed the sapcar file in the same directory as oracle source file were placed and also I am sure I am trying to extract the this file in the same directory in command prompt.
Even I placed this sapcar file in environment variable = path.
Kindly advice me where the problem is.
Regards
Vijay

Hello All,
Yes I have downloaded the x86_64 bit and also changed the mode as 777.
Planned to install the environment (4.7E with oracle 8i in red hat linux) - System copy purpose.
So, I have installed the red hat linux 5 and now started to install oracle 8i. I have tried to unextract the oracle.sar file there i got this error and now i am geting the different error after changing the environment variable - path.
The error is SAPCAR: error while loading shared libraries:libstdc++-libc6.1-1.so.2:cannot open shared object file:no such file or directory
Regards
Vijay

"Errors Found During Burning Process"

Hi,
Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
Any ideas?
For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
Appreciate any help you can give me.
Neil

Colleagues:
Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
Thanks!

No oracle rdbms file found during PI 7.1 EHP1 installation

Similar Messages

Maybe you are looking for