No organisational structure maintained for this item

I am trying to create a shopping cart in SRM 4.0 front end and i keep getting the error no organisational structure maintained for this item. the purchasing group is not being picked up.I will greatly appreciate your help in solving this issue.
thank you

Hi Guys,
Well... I think I have found the cause of the problem.  But I dont know how to solve it.
In my Org Model, "Extended Attributes" tab, "Product Categories" option selected.  In that place I need to assign my Backend as the Src. System, and then choose my Product Category.     
The problem is that I dont have any category linked to my backend system.    Because If I choose my SRM as the Src. System, I can see all the product categories that I have created.
Somebody knows how can I link my Product Categories to my backend?   
pd: my current categories were created manually in srm (not imported from r3)
THANKS FOR YOUR HELP GUYS !!!!!!
Regards,
Diego

Similar Messages

  • Structure not yet maintained for this combination of characteristics

    Hi,
    I have crated infor structure, maintained parameter. Created planning hierarchy also.
    When I use transaction MC93 to create flexible plan, I am getting error message ""Structure not yet maintained for this combination of characteristics""
    Please suggest to overcome this issue.
    thanks and regards
    murugesan

    Dear Murugesan,
    could you elaborate (explain in more detail) about the step you do to fix this issue?
    right now i am encountering the same problem?
    Thank you in advance for your help.

  • Pricing at time of goods receipt not possible for this item

    We're receiving error Message no. 06634 Pricing at time of goods receipt not possible for this item when trying to change the PO Pricing Date Category from No Control to 5 GR Date.
    The error message is clear and reads:
    Pricing at time of goods receipt not possible for this item
    Message no. 06634
    Diagnosis
    For this purchasing document item, you wish to specify that a new price determination process is to be carried out at the time of goods receipt.
    System Response
    Pricing cannot be carried out for the item at the time of goods receipt because the price was either entered manually or copied from the last purchasing document.
    The scenario is that we have a contract reference on a PO and the contract condition records are to be maintained as a new price is valid each day.  The problem without this is that the new pricing will not be reflected in the GR.
    What is the solution to overcome this issue?
    NOTE:  the Info Record conditions are not being read during GR as the PO references a contract.

    For further clarification the PO is referencing a contract and as such not pulling the pricing information from the info record and instead pulling the price from the conditions on the contract. 
    I want to change the pricing date category from " No Control" to "5 GR Date" however I'm receiving the error message stated and unsure of how to make this change.
    The intent is not to create a new PO each day the condition record is created and instead we are utilizing one PO referencing one contract with multiple date delimited condition records containing the daily pricing.

  • Unable to create new structure code for System Items flexfield

    Hi
    I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
    Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
    Regards
    Reem

    Hi Everyone,
    Lets address your exact problem ::
    I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
    Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
    Yes ! The answer is that this is exactly how it is supposed to work.
    In Inventory :: [ System Items KFF ] is supposed to be single structure whereas Item-Categories has Multi-Structure option.
    For every Single Instance :: It is like this only ~ as a standard functionality.
    And this becomes very very challenging ( but a very fruitful & long lasting ) exercise.
    Thrash it with the clients :: Why should you ever have 2-3 different Item codification schemas when its the same enterprise ?
    They might respond with different intelligence incorporated in the Item Codes.
    Most of the Intelligence can be shifted to the Item-Categories as they are not long lasting.
    &&&& This means that either you can push for non-significant part numbering schema or the partial intelligence.
    Keep it small & simple !!
    Ajay Kuma, 510-456-5322

  • Message no. V1321 - Item category ALES is not defined for this item

    Hi,
    I am trying to use ALES - Item Category for creation of the Sales Order. But i am getting this eerror message as Item category ALES is not defined for this item. Please let me know the config changes that i need to do to use this Item Category.
    Thanks in Advance !!

    To maintain the item category for a sales order type first you have to assign the item category in SPRO.
    SPRO>Sales & Distribution>Sales>Sales Documents>Sales Document Item>Assign item categories.
    In the screen Change view Item category assignement:overview screen
    select your sales document type + ItemcategorygroupUsageHigherLevel Item category
    Then you have to maintain Default item category and Manual item category.
    Default item category will be proposed by the system when you enter a material in sales order. You can change the item category to any one of the manual item category maintained above.
    For e.g.: You are creating a thrid party sales order. Default item category is TAN, if manual item category is maintained as TAS for this combination of sales document type + ItemcategorygroupUsageHigherLevel Item category and then system will allow you to change item category to TAS. If this is not maintained then system will give you an error as"Item category TAS is not defined for this item".
    Again depending the item category further acitivites will be carried in SAP, like in third party item (TAS) PR screen will be displayed.
    Thanks,
    Sarvesh Desai
    Edited by: Sarvesh DeSai on Jan 11, 2012 7:08 AM

  • 'Item category SUBC is not defined for this item'

    Hi,
    When i tried to create an SO with item category SUBC, the system pop-up this error msg: 'Item cateogry SUBC is not defined for this item'
    Please let me know what should i do?  Thank you.
    I've maintained the item category assignment with same item category group maintained in material master data..But it still not work...

    Dear Laa,
    This is due to not done the itemcategory definition and determination.So
    First you define the itemcategory  SUBC through VOV7 transaction (By copying standard TAN)
    Then do the itemcategory determination through VOV4 transaction for this combination
    Sales document type+Itemcategory group--->Itemcategory
    Itemcategory group is different from itemcategory.
    Itemcategory group maintained in the Material master data
    The item categroy will get determine in the sales order based on Sales document type+Itemcategory group
    I hope this will help you,
    Regards,
    Murali.

  • Item category RENN is not defined for this item

    Hey SD experts,
    I've created a sales order with free of charge and standard items.
    Now, I'm trying to create a return order with reference to this sales order.
    I got this error message: Item category RENN is not defined for this item.
    I've checked in VOV4 : the combination Sales document type + Itemcategory group =>Itemcategory seems to be correct.
    Why am I getting this error message then ?
    Regards,
    Bahia.

    Dear Bahia,
    Check item level copy control settings between Sales order free of charge and Return sales order i.e copy control settings between free of charge order item category and returns order itemcategory.
    Once again check item category determination through VOV4 transaction for the combination of
    Your returns order document type+Itemcategory group-->RENN.
    I hope this will help you,
    Regards,
    Murali.

  • On hand quantity exists or there are open delivery transactions for this item

    Hi all,
           on hand quantity exists or there are open delivery transactions for this item in oracle apps at the master item copy from & lines status in Transaction Form in Backordered.
    Thank You

    Hi,
    Make sure you completely receive the PO, then you should be good enough to convert the item to expense.
    Thanks
    -Arif.

  • Error in RFx : Item type 'Service' not allowed for this Item

    hi , experts,
      We use SRM7.0 in Standalone scenario .
      i get an error when i transfer SC to RFx :     Line 0001: Item type 'Service' not allowed for this Item .
    if someone kindly tell me how to correct this Error.
      another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
       reagrds
               claud

    Hi Claud,
    SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
    Thanks and regards,
    Ranjan

  • Error when writing reviews: "in order to write a customer review for this item you must have purchased or downloaded it first"

    I constantly get the error "in order to write a customer review for this item you must have purchased or downloaded it first" when I'm trying to write reviews on my iPhone.  Sometimes I can access iTunes via my PC and write the review on there from the App Store page, but sometimes even that doesn't work.  Even though, at the top of the app's page, it says "downloaded" under the graphic.  I am properly logged into iTunes, using the same email address and password I used to purchase the app.  I don't understand why this is happening, it doesn't make sense.  It started after I updated to iOS5, but I can't find any mention of other people having this problem.  Anyone know anything?

    You CAN'T review applications "purchased" using a promo code. Not saying you used a promo code, but if you did, you won't be able to leave a review. If you didn't use a promo code, delete the app in question from your iTunes library, then re-download it. See if you can leave a review now.

  • 'You do not have permissions for this item' - MATERIAL SPECIFICATION

    Dear members,
    I am trying to access a Material Spec but I am persistently presented with the following message: "'You do not have permissions for this item'".
    Funnily, I was previously able to access the specifications but now I am presented with this.
    I have the same issue with LIO Profiles.
    Does anybody have a known solution for this?
    Kind regards,

    This usually occurs when you do not have Read permission according to the workflow status of the specification. Different permissions can be set up for different statuses in WFA (WorkFlow) Administration.
    Also, if you are using the Business Units as Security feature (rather than just BU visibility), you could get this message. In this case, you should not be able to see this spec in a search result though, so if you can see it in the material spec search page results, it isn't a BU issue, it is a workflow read permission issue.
    There is one additional possibility, which is if your team has implemented the SpecVetoHandler extensibility point, which allows for added custom read permission checks. This is a technical extensibility point configured in the CustomPluginExtensions.xml config.
    But most likely, it is a workflow permissions issue. You'll have to ask your workflow adminitrator user(s).
    Regards
    Ron

  • Materail not fully maintained for this transaction/event

    Dear All,
    When i am extending material to new storage Location using MMSC i am getting below error msg.
    "materail not fully maintained for this transaction/event" wht may be the reason.
    regards
    venu gopal

    Hi
    Check whether material has plant level data ie:any views like MRP, purchasing .
    i suppose if material has only basic data 1 and 2 then u may get the below error.
    Chk and revert
    Reg
    Raja

  • Item Category: The specified category assignment is not found for this item

    HI All,
    I am loading Item category Assignment for Purchasing category Set, the standard prg fails and gives the error "The specified category assignment is not found for this item".
    Where as for the inventory category set its working fine and the assignment is through.
    Are there any changes required for this.
    Thanks
    Basaw

    As the error indicates, your servlet does not support GET method calls. Override doGet() method to do what you are doing in doPost to avoid this error. If you want your servlet to serve GET as well as POST methods, override service method instead.

  • Quick view is currently unavailable for this item

    There must be something set up wrong because when I go into Itunes "reccomendations for you" every item that I try to see using quick view always comes up with the same message " Quick view is currently unavailable for this item". perhaps someone had the same problem and found a solution. itunes for Windows in a windows 8 machine.

    Same here. I actually had this problem a few iTunes versions ago, and it lasted for a year or so. I don't even remember what I did or what happened that fixed it. Wish I could recall. I can't view any quick views for my Genius Recommendations in the iTunes store.

  • This action is not valid for this item

    Hi all,
    I am facing with "This action is not valid for this item" error, if I submit the items by using "Submit Decisions" button on UWL. Please find the uwl, below;
        <ItemType name="uwl.task.webflow.decision.TS90100027" connector="WebFlowConnector" defaultView="DevamDevamsizlik" defaultAction="viewDetail" executionMode="pessimistic">
          <ItemTypeCriteria externalType="TS90100027" connector="WebFlowConnector"/>
          <CustomAttributes>
            <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="session">
              <Attribute name="Personel" type="string" displayName="Personel Ad&#305;"/>
              <Attribute name="AttAbsText" type="string" displayName="Devam/Devams&#305;zl&#305;k Tipi"/>
              <Attribute name="BaslangicTarihi" type="date" displayName="Ba&#351;lang&#305;&#231; Tarihi"/>
              <Attribute name="BaslangicSaati" type="time" displayName="Ba&#351;lang&#305;&#231; Saati"/>
              <Attribute name="BitisSaati" type="time" displayName="Biti&#351; Saati"/>
              <Attribute name="BitisTarihi" type="date" displayName="Biti&#351; Tarihi"/>
            </CustomAttributeSource>
          </CustomAttributes>
          <Actions>
            <Action name="Onayla" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
              <Properties>
                <Property name="decisionKey" value="0001"/>
                <Property name="UserDecisionTitle" value="Onayla"/>
              </Properties>
              <Descriptions default="Onayla"/>
            </Action>
            <Action name="Reddet" groupAction="" handler="SAPBSPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="no">
              <Properties>
                <Property name="decisionKey" value="0002"/>
                <Property name="UserDecisionTitle" value="Reddet"/>
                <Property name="Application" value="zh12j010"/>
                <Property name="PageId" value="rejectreason.htm"/>
                <Property name="workitemId" value="${item.externalId}"/>
              </Properties>
              <Descriptions default="Reddet"/>
            </Action>
            <Action name="Detay" groupAction="" handler="SAPBSPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="no">
              <Properties>
                <Property name="Application" value="zh12j010"/>
                <Property name="PageId" value="detail.htm"/>
              </Properties>
              <Descriptions default="Detay"/>
            </Action>
            <Action name="Yazdir" groupAction="" handler="SAPBSPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="no">
              <Properties>
                <Property name="Application" value="zh12j010"/>
                <Property name="PageId" value="print.htm"/>
              </Properties>
              <Descriptions default="Yazd&#305;r"/>
            </Action>
            <Action name="submitUserDecisions" groupAction="yes" handler="UIActionHandler" referenceBundle="submit" returnToDetailViewAllowed="no" launchInNewWindow="no"/>
          </Actions>
        </ItemType>
        <View name="DevamDevamsizlik" selectionMode="MULTISELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.TS90100027" columnOrder="createdDate, Personel, AttAbsText, BaslangicTarihi, BitisTarihi, BaslangicSaati, BitisSaati, redCol, onayCol" sortby="createdDate" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" refresh="-1" dueDateSevere="0" dueDateWarning="0" emphasizedItems="new" displayOnlyDefinedAttributes="no" dynamicCreationAllowed="yes" actionPosition="bottom">
          <Descriptions default="Devam/Devams&#305;zl&#305;k Talepleri">
            <ShortDescriptions>
              <Description Language="en" Description="Devam/Devams&#305;zl&#305;k Talebi Onay"/>
            </ShortDescriptions>
          </Descriptions>
          <DisplayAttributes>
            <DisplayAttribute name="onayCol" type="checkbox" width="" sortable="no" format="default" actionRef="0001" hAlign="CENTER" vAlign="TOP" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Onayla">
                <ShortDescriptions>
                  <Description Language="en" Description="Onayla"/>
                </ShortDescriptions>
              </Descriptions>
            </DisplayAttribute>
            <DisplayAttribute name="Personel" type="string" width="30" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Personel"/>
            </DisplayAttribute>
            <DisplayAttribute name="AttAbsText" type="string" width="15" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Devam/Devams&#305;zl&#305;k Tipi"/>
            </DisplayAttribute>
            <DisplayAttribute name="BaslangicTarihi" type="date" width="" sortable="yes" format="medium" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Ba&#351;lang&#305;&#231; Tarihi"/>
            </DisplayAttribute>
            <DisplayAttribute name="BaslangicSaati" type="time" width="" sortable="no" format="medium" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Ba&#351;lang&#305;&#231; Saati"/>
            </DisplayAttribute>
            <DisplayAttribute name="redCol" type="link" width="20" sortable="no" format="default" actionRef="Reddet" hAlign="CENTER" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Reddet">
                <ShortDescriptions>
                  <Description Language="en" Description="Reddet"/>
                </ShortDescriptions>
              </Descriptions>
            </DisplayAttribute>
            <DisplayAttribute name="BitisSaati" type="time" width="" sortable="no" format="medium" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Biti&#351; Saati"/>
            </DisplayAttribute>
            <DisplayAttribute name="BitisTarihi" type="date" width="" sortable="yes" format="medium" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Biti&#351; Tarihi"/>
            </DisplayAttribute>
          </DisplayAttributes>
          <Actions>
            <Action reference="submitUserDecisions"/>
            <Action reference="refresh"/>
            <Action reference="forward"/>
          </Actions>
        </View>
    Can anyone give a suggestion about it?
    Thank you

    Hi all,
    I had the exact same error using a user decision configuration.  Issue was that I was using a VIEW that did not exist:
    ItemType name="uwl.task.webflow.TS90300005" connector="WebFlowConnector" defaultView="DefaultApprovalView">
    DefaultApprovalView was not defined as a custom view.
    SOLUTION: changed it to standard SAP com.sap.pct.erp.srvconfig.approvaloverview view and it worked!
    ItemType name="uwl.task.webflow.TS90300005" connector="WebFlowConnector" defaultView="com.sap.pct.erp.srvconfig.approvaloverview">
    This is normally by default defined in a standard portal system.
    Edited by: David Pierre on Jan 13, 2010 3:15 PM
    Edited by: David Pierre on Jan 13, 2010 3:16 PM
    Edited by: David Pierre on Jan 13, 2010 3:19 PM

Maybe you are looking for

  • Base unit of measure is cahnging after creation of material master

    Hi I have created a material with material type Raw material with BUM  "Ton" , after save the material, when iam checking the material with display mode, the BUM is changed into "EA",i dont know where the sustem picks the BUM as "EA", kindly suggest

  • [WinXP/Lab​View7.0]Re​ading parallel port is too slow...

    Hi, First I would like to apologize for my English. I'm from Switzerland.... I'm trying to read out a 16Bit A/D in 1us steps. Serial Communication over a PIC is too slow, so I was looking for a faster option. I found out there is possibility to read

  • Oracle Forms Builder - Errors

    Hi to all! I'm beginner in Oracle Forms and Reports. The OS is Windows and the software is Oracle Forms and Reports Developer 10g with Database Server 10g. I have started with customers.fmb and orders.fmb. When I try start customers.fmb, I get the er

  • How to measure the Data setup time

    I want to do a SPI timing AC characteristics. I use labview capture a frame of SPI data package from a oscilloscope and display in a waveform Graph. Lead time, Data setup time, data hold time... should be measured. So, what is the next  step should i

  • Why won't Netflix connect?

    netflix won't let me connect, Netflix said it has something to do with Apple TV itself.  I click on Netflix then the page goes to the id for your email address then the page goes black for a few seconds then back to the home page!