No organization data for service products
Hi,
I create a CRM service order with a service product. Now there is a message, that the product in sales organization and distribution channel is not scheduled.
Our service products in general don't have organization data, cause they occur from r/3 service master data (transaction ac03).
How to assign org.data to service products in CRM? I cannot assign the set type for org.data to the category of service products cause we download the products with the middleware from R/3.
Regards
Jochen
Hi
Sercie products will be created in CRM in service product type, while creating a service product you have to assign the Organizational data in sales and distribution tab
Thanks
Satheesh
Similar Messages
-
Organization Data for Service Orders and Service Confirmation
Hi,
Whenever I create any Service Order or Service Confirmation, the Organization Data is automatically populated.
My doubts are :
1. Is is mandatory to provide Organization Data for Service Order/Confirmation Creation ?
2. What/ Where are the customization for the Organization Management for the above scenario ?
Thanks and Regards,
Samantak.Dear Samantak,
org determination should only be made, if you have customized it.
So please check which org. data profil has been assigned to the involved transaction types (in SPRO Define transaction types).
And what the profil does (the rule behind) can be found also in SPRO
- Master Data
- Organizational Management
- Organizational Data Determination
- Change Rules and Profiles
-Maintain Organizational Data Profile
Please check the documentation there!
Regards, Gerhard -
Creation of EBP Purchase Order for Service Products in MM
Hello all,
i have created the service master in MM system and then i have replicated the service master to EBP later i tried to create a EBP PO for Service Products through Sourcing from EBP to MM.
But i am getting a failure message as "Error during determination of backend document follow on documents for shopping cart " and PO is not created anyway.
But i can create PO for Materials with the same process.
I am getting this message only during creation of PO with Service Products.
I request you if any body has the solution please post your valuble information as early as possible.Mahesh
What I understood from your case is you were able to create PR in backend for service items when you assign vendor manually durin g SC creation.
In that case definitely it will create PR instead of PO in backend. Because when a vendor is assigned manually during SC creation. that vendor is treated as desired vendor and not fixed vendor. So it gives suggestion to buyer, who converts PR to PO, to use this vendor.
When a desired vendor is assigned manually, SC is treated as incomplete. SC is complete only when source of supply is assigned automatically.
If you want that desired vendor to be treated as fixed vendor you need to maintain the same in BADI BBP_DOC_CHANGE and method BBP_SC_CHANGE.
If PO is to be created directly(Without BADI logic) make sure vendor is assigned automatically in source of supply section of SC. This can be possible by maintaining vendor list in SRM or maintain a Contract for that product in backend so that system will pick that source automatically.
Try this and see what document is created in backend.
PS:Reward points if the solution is helpful to you.
Regards
Jagadish -
It is not allowing me to install, it gives me the error: configuration data for this product is corrupt. How do I install itunes on my windows 7?
Trying to update my ipad....but I first need to install itunes!!(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI" I
am so disgusted,please help!!!Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Trying to install j2SE 1.4.2_03 JRE on a Windows system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying. -
Trying to install j2SE 1.4.2_03 JRE on a Windows XP system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying. -
Re : Organizational data for inter-company billing
Hi
While doing intercompany settings (img - enterprice structure - SD - assign sales org - disribution plant) i am getting the following error
" Organizational data for inter-company billing
missing in plant SUDA "
How to solve.
Thanks
AntoHi Anto,
IMG check wheather you assing Supplying company sales area to Supplying plant.
IMG->Saes&Dsitr -> Billing -> InterCompany Billing-> Assign Organizational unit by Plant
Select Plant (supplying company) and assign Sales org, Distbn Channel and Division of supplying company.
Regards,
M.Manickam -
Organizational data for inter-company billing missing in plant 2200
Organizational data for inter-company billing missing in plant 2200
Dear Siva,
This may be related to incompleteness in the inter -company billing configuration settings so go through this IMG path then do the proper settings,
SPRO>Sales and distribution>Billing>Inter company billing>Assign organisational units by plant, here you need to assign the Sales organisation,Distributional channel and Division (sales area) to the 2200 plant.
Now you try
I hope it will help you
Regards,
Murali. -
hi there
i was trying to install latest itunes it gives error
the configuration data for this product is corrupt contact your personal support
how can i fix it and what is the reason for this error(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Make-To-Order Production for Service Products
Hi All,
has anyone some experience with SAP R/3 (SD, CS, MM, FI,CO) Make-To-Order Production for Service Products?
Does the Make-To-Order Production Scenarion work for Service Products?
Is there any documentation about Make-To-Order Production Scenarion for Service Products?
Regards
KlausIt works using transaction OSID to define service products and using requirements class and type to control the creation of service orders or projects for sales document items. All business services can be implemented using these service products.
We have inplemented Customer Center Solution based on this approch for a Atlas Copco (http://www.atlascopco.com/us) with cutomer center in more tham 70 countries.
They make, sell, rent, finance and service
Construction and Mining
Compressors and Generators
Industrial tools
Regards
Klaus -
I'm trying to update itunes but not very successful and im not making much progress. Im currently getting a message on the screen from Window Installer quoting configuration data for this product is corrupt while trying
The path 'C:\Documents and Settings\HP_Administrator\Local Settings\Application Data\Apple\Apple Software Update\iTunes.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5). I get the error: "The configuration data for this product is corrupt. Contact your support personnel." Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc. Not worthwhile to reinstal Windows 7. What do I do?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
How do I set-up my Dataset to pull data for Service Requests for a report
I am using SQL Server 2012 Report Builder 3.0.
I have my Data Source added - DWDataMart
I want to build my Dataset to query and find a very specific item. Basically I am creating a daily report that will show what each "team" or Support Group (AD Object) Closed that day. He also wants the ability to open it by date, so if he misses
a day he can get it later.
I am totally new to this report building and only got this far by following a guide on a blog, but he used incident Reports in his example, and I do not know what objects to query for service requests.
Thanks for any information you can provide.First, you will need to get the support group ID's in the warehouse before you can run reports for them. I found that putting these queries in their own stored procedure was a better path.
select IR.IncidentTierQueuesId, IR.IncidentTierQueuesValue
from dbo.IncidentTierQueues as IR
where IR.IncidentTierQueuesId != 0
select SR.ServiceRequestSupportGroupId, SR.ServiceRequestSupportGroupValue
from dbo.ServiceRequestSupportGroup as SR
where sr.ServiceRequestSupportGroupId != 0
Enter the the support group ID's into your work item query.
Incident information is in dbo.IncidentDim and Service Requests are found in dbo.ServiceRequestDim. Both incidents and service requests link to relationship data through dbo.WorkItemDim. You can INNER JOIN on BaseManagedEntityId to link the incident
or service request to the workitem entry and from there to the Assigned Users, Affected Users, or Affected Configuration Items. Each relationship has it's own separate fact views.
If you poke about in the tables, you will find it pretty easy to pull back all sorts of information from the data warehouse.
Maybe you are looking for
-
Robo HTML 9 will not open our project from Source Control after initial start.
We have a project in version control that we have been using forever, since 2003 or so and many versions of RH. Now that we have upgraded to 9, this project will open the first time in version control and work normally. Once you close the project a
-
Appointments in BB won't sync to Outlook / duplicates
HI all I have two questions. 1. I have a number of appointments on the BB which don't transfer to Outlook when I sync. I have tried adding text to the comments to try to trigger a sync (as it's changed) but it makes no difference. Any ideas? 2. I hav
-
Data recovery, possible to get the file structure back as well?
Hi Apple Smarties, I closed my laptop lid on my external LaCie drive without ejecting the drive first (smart one!). After that the external drive wouldn't mount. I've used Data Rescue 3 to recover all the files from the drive... however it's just lum
-
Best way to set up home network using Time Capsule
Hi My current home network consists of Macbook Pro 17 connected wirelessly, another Mac and few pcs. I have a Time Capsule, new netgear router and several hard drives. At the moment my main drive is plugged in via usb to the mac, however id like to s
-
Hello, i have a problem with my ID Apple. i chenaged my principal mail's account and now i can't enter in different services. When i try to log in appear a message as "you have to verify your mail - account", when i follow the links to verify, the pa