No output to speakers! HELP!!!

• Running Panther 10.3.9
• Using Garageband 2.02 + Quatafire 620 preamp/input gizmo.
• Headphones are connected to Quatafire and so are the external (Truth studiomonitors) speakers.
• I can use the speakers for everything BUT Garageband! I.e. iTunes, Safari, Quicktime etc etc etc.
• Normally GB works perfectly but only via headphones connected to Quatafire. I cannot hear GB over the speakers.
• Ive tried configuring the internal MIDI-program (sound and Midi prefs), Ive tried the Quatafire panel and the internal sound prefs. Nothing will make GB play over the speakers.
• Ive tried changing the GB Midi-prefs. Nothing.
• Tried combining GB-midi prefs with numerous other midi prefs - so far no luck.
This is driving me absolutely insane. Is GB packed with bugs or just ridiculously hard to use?

I dunno what or who HangTime is, but I can tell you hat I dont get any sound thru my external speakers no mattter what I do.
New or old projects. It´s all the same.
I CAN get sound thru the internal speakers (just by switching output device) and my headphone (via QuataFire), but the dang thing wont play thru my speakers
Since I can listen thru my headphones, I knoww for a fact that the signal gets from GB thru my QuataFire external thingy and into my headphones.
So why the signal wont run from GB to QuataFire and the speakers (connected to QuataFire) is beyond me.
Yes, they are connected, and as I wrote before, I can listen to iTunes, Safari etc on the speakers.
This is why I suggested the internal Mac MIDI-application.
This application can change the channel from which the speakers get their signal. There seem to be 10 channels, and QuataFire has allocated 2 channels to the speakers. I can control the input via this MIDI application, but ONLY input from any other application than GB!!
***??

Similar Messages

  • Cannot hear any sound through my external speakers - help!

    I'm running 10.6.4 on my imac 27". Can hear sound though the internal speakers, but even when I plug externals in and restart I can't see any option in the sound system preferences to let me hear through the external speakers. It's odd. Can anyone help?

    More information will help.
    Is this a problem that just started for you, or have you never been able to plug in headphones or external speakers and have them work?
    Are you sure you are plugging into the correct jack on the computer? On my slightly older iMac I sometimes reach around to the back and hit the wrong jack.
    When I open "Sound" in System Preferences and hit the "Output" tab, I see "Internal Speakers" listed. Then when I plug in my headphones the "Internal Speakers" automatically changes to "Headphones."
    Is this what you see on your computer?
    Good luck.
    Arch

  • Audio output through speakers but not headphone jack

    I have an HP Envy 15-J178ca. I am unable to play audio from my headphone jack, but audio plays on my speakers. When I plug in my headphones, the speakers stop outputting audio but no audio plays through the headphone output. I have tried multiple headphones which all work on different devices and was unsuccessful at outputting audio. I have updated my audio driver to the latest version using the HP drivers site. The following is a screenshot of the sound devices on my computer.

    I have the same exact problem, may some one help us

  • I have a record player hooked up through the audio port.  The input volume is registering high, but there is no output anywhere.  Help?

    I have a record player hooked up to a preamp which is hooked up through the audio port.The sound settings are set to have the audio port be "input".  The input volume is registering high with fluxuations in the sound settings, but there is no output anywhere.  Do I need some sort of third party application or widget to hear the record i'm playing through the speakers that are hooked up to my computer?

    keithstopher,
    You may want to check into a USB interface, as I believe you have a Mac with the single audio port, which can be used as input OR output.
    You may want to check into something like the following, there are may out there, see what fits your needs best.
    http://www.amazon.com/Behringer-UFO202-BEHRINGER-U-PHONO/dp/B002GHBYZ0/ref=pd_cp _MI_2
    Hope this helps

  • Audio output to Speakers

    I have been using the mac for quite some time with a logitech 2.1 speaker system. Use was fine for a considerable amount of time, until one day I noticed there was no sound going to left speaker. I have checked the balance for line out in System Preferences > Sound and it is in the middle. I have tried with other speakers and earphone, and they all output to only one speaker. These same speakers and earphone work fine with other devices (iPod, PC).
    Furthermore, when I remove the audio out plug, the internal speakers work on both left and right channel.
    Anyone have any ideas what might be causing this, or how to solve the problem without a service? Has this happended to anyone else?
    iMac G5 2.0ghz   Mac OS X (10.4.3)   1GB ram.

    try going to utilities/audio midi setup and go to configure speakers.
    you might have both speakers set to channel 1 or 2. Also try meesing around with 2ch-16 bit and 2ch-24 bit options.

  • No audio output on speakers plugged into 3000 H210

    I recently purchased a 3000 H210 57094408 running Vista home premium Service Pack 2 (all recent Vista updates have been installed). 
    With speakers plugged into the back output port, I was able to open Lenovo HD Audio Manager and obtain test tones in stereo through my speakers.  I couldn't, however, get audio from iTunes, YouTube, etc., nor could I get test sounds in Control Panel->Hardware and Sound->Sound->Sounds.  In Control Panel->->Sound->Playback, I noticed that there were two speakers shown, one Realtek HD speaker that was "working" and the USB Audio CODEC speakers I'd plugged in, which were also "working" and demonstrating audio levels in the status bar to the right of the speaker icon (I was playing music in iTunes while checking the settings).  I made sure the cheapo speakers were selected as the default, but still no sound was coming out of said speakers -- the same speakers that had made the test sound noises in Lenovo HD Audio Manager.
    I suspected the HD speakers (the nature of which I knew not) were interfering with my cheapo speakers, so I disabled them, and they no longer appear in the list of speakers.  Now Lenovo HD Audio Manager shows no speakers at all, and the test tone option isn't available to me in that application.  Control Panel->->Sound->Playback still shows my cheapo speakers, but they do not even register sounds from iTunes anymore.  Both speakers appear in Device Manager, but I have no idea what the Realtek speakers are supposed to be -- no speakers were included with the Lenovo box.  If they are necessary (i.e., not really speakers but the method by which the sound card communicates with the speakers), how do I get them back up and running?
    Per the User Guide, I have reinstalled the driver for the audio card (Realtek audio ALC 888/662 VISTA driver), but that hasn't done anything.  I'm out of options at this point and would love any guidance!  Thanks in advance.
    Solved!
    Go to Solution.

    Update (and a successful one, no less)!  After an extended remix call with Lenovo support, we uninstalled and reinstalled the driver for the Realtek controller (found in Device Manager under the sound controllers), which solved the problem.  Guess the controller driver had been corrupted, which is why it could work in the HD Audio Manager program but couldn't in the other applications.  Anyway, thought I'd post the solution in case anyone else has the no audio issue -- they can avoid some of my detours and missteps!

  • Output Video Playback Help

    Hello Again,
    I first wanted to thank those who helped with my initial issue. I went through the 16 steps and was able to fix the blue hue over my output video. Now I have an issue where when I go to playback in the output video, it is very choppy or the video does not move at all and all you hear is the audio. Please help if you can. Thank-You
    Jeff

    If you were sitting down at your computer and you added 3 clips to your timeline, went to play them back, and the video was choppy and lagging. What would you do in the program to fix that problem.
    Assuming the use of DV media on internal hard drives specific to that purpose, I'd reboot.
    If that didn't clear it up, I'd check my hard drives for fragmentation.
    If that didn't work, I'd check other clips for comparison.
    If that didn't work, I'd try a different project as a test, as well as various media players to see how well they handled playback.
    If that didn't work, I'd try the same clips on another computer.
    If that didn't work, then chances are I violated item one by not using DV media.

  • How to suppress the Print Popup in the output ..Please Help Me.

    Hi All,
    <b>My customization is going in Adobe forms.</b>
    when i execute the print program,i am getting  the print popup and asking to enter Output Device.But i don't want to display this <b>Print Popup</B> .How to supress this .i want  to get direct print preview without asking Output Device.
    Please help me.
    I APPRICIATE(REWARD) IF ANY ONE HELPS ME...
    regards,
    Suresh.

    Hi
    See this sample code
    SAMPLE CODE FOR PRINTING
    data: carr_id type sbook-carrid,
    cparam type ssfctrlop,
    outop type ssfcompop,
    fm_name type rs38l_fnam.
    DATA: tab_otf_data TYPE ssfcrescl,
    pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
    tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
    file_size TYPE i,
    bin_filesize TYPE i,
    FILE_NAME type string,
    File_path type string,
    FULL_PATH type string.
    parameter: p_custid type scustom-id default 1.
    select-options: s_carrid for carr_id default 'LH' to 'LH'.
    parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
    data: customer type scustom,
    bookings type ty_bookings,
    connections type ty_connections.
    start-of-selection.
    <b>************ suppressing the dialog box for print preview*****
    outop-tddest = 'LP01'.
    cparam-no_dialog = 'X'.
    cparam-preview = SPACE.
    cparam-getotf = 'X'.</b>
    select single * from scustom into customer where id = p_custid.
    check sy-subrc = 0.
    select * from sbook into table bookings
    where customid = p_custid
    and carrid in s_carrid
    order by primary key.
    select * from spfli into table connections
    for all entries in bookings
    where carrid = bookings-carrid
    and connid = bookings-connid
    order by primary key.
    call function 'SSF_FUNCTION_MODULE_NAME'
    exporting formname = p_form
    variant = ' '
    direct_call = ' '
    importing fm_name = fm_name
    exceptions no_form = 1
    no_function_module = 2
    others = 3.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
    endif.
    calling the generated function module
    call function fm_name
    exporting
    archive_index =
    archive_parameters =
    control_parameters = cparam
    mail_appl_obj =
    mail_recipient =
    mail_sender =
    output_options = outop
    user_settings = SPACE
    bookings = bookings
    customer = customer
    connections = connections
    importing
    document_output_info =
    job_output_info = tab_otf_data
    job_output_options =
    exceptions formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    others = 5.
    if sy-subrc <> 0.
    error handling
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    tab_otf_final[] = tab_otf_data-otfdata[].
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
    format = 'PDF'
    max_linewidth = 132
    ARCHIVE_INDEX = ' '
    COPYNUMBER = 0
    ASCII_BIDI_VIS2LOG = ' '
    IMPORTING
    bin_filesize = bin_filesize
    BIN_FILE =
    TABLES
    otf = tab_otf_final
    lines = pdf_tab
    EXCEPTIONS
    err_max_linewidth = 1
    err_format = 2
    err_conv_not_possible = 3
    err_bad_otf = 4
    OTHERS = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
    WINDOW_TITLE =
    DEFAULT_EXTENSION =
    DEFAULT_FILE_NAME =
    FILE_FILTER =
    INITIAL_DIRECTORY =
    WITH_ENCODING =
    PROMPT_ON_OVERWRITE = 'X'
    CHANGING
    filename = FILE_NAME
    path = FILE_PATH
    fullpath = FULL_PATH
    USER_ACTION =
    FILE_ENCODING =
    EXCEPTIONS
    CNTL_ERROR = 1
    ERROR_NO_GUI = 2
    NOT_SUPPORTED_BY_GUI = 3
    others = 4
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ************downloading the converted PDF data to your local PC*******
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    bin_filesize = bin_filesize
    filename = FULL_PATH
    filetype = 'BIN'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = ' '
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    CONFIRM_OVERWRITE = ' '
    NO_AUTH_CHECK = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    WRITE_BOM = ' '
    TRUNC_TRAILING_BLANKS_EOL = 'X'
    IMPORTING
    filelength = file_size
    TABLES
    data_tab = pdf_tab
    FIELDNAMES =
    EXCEPTIONS
    file_write_error = 1
    no_batch = 2
    gui_refuse_filetransfer = 3
    invalid_type = 4
    no_authority = 5
    unknown_error = 6
    header_not_allowed = 7
    separator_not_allowed = 8
    filesize_not_allowed = 9
    header_too_long = 10
    dp_error_create = 11
    dp_error_send = 12
    dp_error_write = 13
    unknown_dp_error = 14
    access_denied = 15
    dp_out_of_memory = 16
    disk_full = 17
    dp_timeout = 18
    file_not_found = 19
    dataprovider_exception = 20
    control_flush_error = 21
    OTHERS = 22
    IF sy-subrc <> 0.
    ENDIF.
    Regards
    Anji

  • Erratic Volume Output From Speakers (App notifications, keypad tones, Ringing Volume)

    Just purchased a Z1 over the weekend and was happily fumbling with the new phone. Got it updated to the latest 4.4.2 as well.
    Noticed a glaring problem with the volume output from the speakers.
    During use of instant messaging apps like Whatsapp and LINE, notification tones come in at times at the level that i set it at (max) and sometimes they come in really soft, to the extent i can't even hear them and sometimes none at all. All these happening when i've set the volumes to MAX on each of the available options under settings>sound>volume. Might i also add that the volume for notifications is really too soft even at MAX.
    I'm not sure if this is happening due to the updating of the software or it was already an issue prior to the update. I've seen a couple of posts online where some users are experiencing the same erratic behavior of the internal speakers. 
    I hope someone can shed some light on this so we don't judge too quickly on an otherwise excellent phone.

    I have the problem with my xperia Z1 speaker and ear phone not detect after update 4.4.2 in kitkat version.
    phone purchasing date : 28.02.2014
    Before update my Z1 runing in 4.3 jelly bean and phone is working properly....i have only one issue in 4.3 during call accept automatically call going in speaker.
    1 Problem after update 4.4.2  kitkat version sometimes movies app playing video song but  voice is not out from phone speaker and song voice playing in ear speaker then i press play/pause button in movies app then song voice play in phone speaker
    2 Problem  i connect my ear phone in my Z1  and phone is  not detect ear phone i play the song in walkman app so song voice is out from phone speaker and not lising voice in ear phone then i restart my phone ear phone is working properly.
     2 times done my Z1  software repair but not fix the problem........please tell me what can i do for fix my Z1 problem
    Thanks & Regards
    Shekhar Jaiswal

  • Output window message help

    I'm working on a file and when I publish the output window
    pops up with the number '20' in it.
    Anyone know what this means?
    Thanks,
    Gary

    I'm afraid I won't be of much help except to say that this is
    a classic permissions issue. I have to assume you've checked and
    double-checked the link referred to in your post (which is a good
    one).
    You might also try this technote:
    Publishing
    to RoboEngine
    In helping others troubleshoot this, it sometimes turns out
    that there are firewall issues that are not obvious especially if
    you are in a large organization crossing many domains from author
    to server. Are you the ultimate "server admin" or is there someone
    in your organization's network admnistration who could help resolve
    the permission issue?
    Sorry I can't be of immediate help.
    john

  • ProBook 6550b: No audio to 3.5mm output and speakers

    Hi,
    Product: notebook ProBook 6550b
    Prod number: WD700EA#ACB
    Operating System: Windows 7 Enterprise 64 bit
    Changes made to system before the issue occurred: installed an audio driver "Version: 6.10.6341.0; 5.10.6341.0" (30 Jun 2011)
    Problem: no output to 3.5mm jack or built-in speakers. When using my USB headset - audio is OK. But I also need speakers and 3.5m audio output working. Seems like I have the latest audio driver installed (please let me know if anything newer is available). How it's possible to fix this?

    You can't simply use an adapter. You have to purchase a DAC converter.

  • Cannot find the hana output adapter, please help me.

    I have downloaded the latest version of ESP in SAP software  Download center, here is the screenshot
    However, when I try to install the hana output adapter in the custom installation process, I couldn't find it. Here is the screenshot:
    please help me with it.

    Hi Kevin,
    The HANA Output Adapter is one of the adapters that is a part of every installation (assuming you installed ESP 5.1 SP04).  It was not available until ESP 5.1 SP01.  I know one of the links on the download site takes you to the ESP 5.1 GA release which did not have the HANA Output Adapter.  Double check the version you installed.  If you did not install ESP 5.1 SP04, see my blog post here on how to get it:
         Getting the latest release of ESP from the SAP Software Download Center
    If you did install SP04, it is already a part of the product.  Use the "F6" key to toggle ESP Studio into the Visual Authoring mode.  Then expand "Output Adapters" palette and choose the "HANA Output Adapter" by click on it once and then clicking on the canvas once.  See the attached screen shot:
    Make sure you have installed the HANA ODBC driver and add an entry to ESP's "service.xml" file as described here and you should be good to go:
        SAP HANA Output Adapter
    Thanks,
      Neal

  • WHY WON'T QT 6.5.3 PLAY MY SORENSON VIDEO 3 OUTPUT? PLEASE HELP!

    Hi,
    I've outputted some videos for my site using Sorenson Video 3 but some people with QT 6.5.3 can't play them.
    They're on MAC 10.2.8 and they get the warning 'Quicktime is missing software required to perform this operation. Unfortunately it is not available on the QT Server.'
    Any idea what this could be?
    Many thanks!
    MARK

    One cause would be if QuickTime was installed on the problem system using the Basic install option rather than the Recommended/Full option. My suggestion would be to have one person reinstall QuickTime 6.5.x and make sure they select the Recommend/Full option and see if that fixes the problem. If it does, you can have everyone else try the same thing.
    Hope this helps.
    Message was edited by: Dave Sawyer

  • Logic Output? Please Help.

    I just recently got an mbox mini and logic pro. For some reason when i use the mbox in garageband the sound comes through my computer speakers but when I use the mbox in logic pro the sound only comes out through the mbox headphone outlet. Is there any way to get my mbox to have its output through logic instead of the headphones? Like a preference setting?

    You said it. In both cases just go to your preferences, as well as on your computer.

  • Audigy 2 ZS/Lost sound Output Rear speakers 5.1(line out

    I seem to have no output on lineout #2. Can switch speaker plugs to line or 3 and then get sound from rear speakers.
    I believe i might have something wrong with card,It's set for 5.,only frt.lft & rt center,sub seem to work.Any Ideas out there?
    Thanks in advance! Windows XP SP-2
    P4-2.4OC'd to 3.4// 4-20 gig HDD's Raid 0//Rocket raid 640 pci card//2 Gigs PC4000///audigy 2 ZS//MSI 865 Neo-2 Platinum//
    NEC 3500 DVD & TDK 880 GDVD Burners//Gainward golden Sample FX5700 UltraMessage Edited by Biggunn on 05-25-2005 :3 PM

    OK , Perhaps i didnt Say this at first But, My speakers,souncard,etc. all Were working fine previously. Just This Past week or so i have lost sound to my rear speakers. The speakers i am using are logitech Z-5500's. As i stated earlier, i can switch speaker connections at soundcard and get sound from the rear speakers. I have tried these speakers on another computer(audigy LS card) and they work on that one without any problems. I have tried the speaker settings console where it shows you a diagram of 5. layout and sound coming from each speaker as it goes around the diagram,it is showing sound symbol for rear speakers but, no sound out of speakers in rear. The creative diagnostics has been run and everything passes in it and shows no problems.

Maybe you are looking for