"No paper" warning
when envelope in lower tray where I want it..printer seems to look for photo paper because the envelope is not an 8 X 10 paper and tells me the printer is out of paper.
Go to Settings>General>About>Available How much available space do you have?
Or it could be saying you don't have sufficient RAM because you have too many apps open.
For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Cheers, Tom
Similar Messages
-
Having a problem with PEAP and Cisco 2960 Switch
Hi All,
I am attempting to use PEAP with a LDAP backend on FreeRadius witht he MS Supplicant. I have it all working, in debug on the Radius server I see it sending all the information, the tunnel, medium etc. but with PEAP the Cisco switch is not changing VLANS. If I install the Cisco or Juniper client it works just fine if I use eap-mschapv2 but peap-mschapv2 does not switch the port to the right vlan. Is there something extra on the switch I need to do to allows PEAP or is there something on the FreeRadius?
The only difference between the PEAP and EAP versions that I can tell is that the PEAP authenticates ands the information is sent once(according to the debug on the Radius server) where as with the EAP the connection information is sent several times, that is I will see the Tunnell and medium info sent more then once in the Radius log for just one login.
Any ideas?Thought I mentioned the client in the first post, I am using the 3 different types of clients with a goal of getting the MS client to work. I am using the Juniper Odyssey client, Cisco CSSC client and the MS built-in client. I mentioned the EAP-MSChanpV2 because I tested that login so I could compare the Radius output with that of PEAP-MSChapV2. I did not release logs from the Radius server because it seems to be centered with something on the switch changing Vlans but if you want output I can give that..
CSSC Client pops out:
14:25:08.453 Network Connection requested from user context.
14:25:08.468 Connection authentication started using the logged in user's credentials.
14:25:08.468 Port state transition to AC_PORT_STATE_CONNECTING(AC_PORT_STATUS_STARTED)
14:25:08.796 Port state transition to AC_PORT_STATE_UNAUTHENTICATED(AC_PORT_STATUS_8021x_FORCED_UNAUTH)
14:25:09.828 Port state transition to AC_PORT_STATE_AUTHENTICATING(AC_PORT_STATUS_8021x_ACQUIRED)
14:25:09.843 Identity has been requested from the network.
14:25:09.875 Identity has been sent to the network.
14:25:09.890 Authentication started using method type EAP-PEAP, level 0
14:25:09.890 The server has requested using authentication type: EAP-PEAP
14:25:09.890 The client has requested using authentication type: EAP-PEAP
14:25:09.968 Profile does not require server validation.
14:25:10.031 Identity has been requested from the network.
14:25:10.031 Identity has been sent to the network.
14:25:10.046 Authentication started using method type EAP-MSCHAP-V2, level 1
14:25:10.046 The server has requested using authentication type: EAP-MSCHAP-V2
14:25:10.046 The client has requested using authentication type: EAP-MSCHAP-V2
14:25:10.078 Port state transition to AC_PORT_STATE_AUTHENTICATED(AC_PORT_STATUS_EAP_SUCCESS)
14:25:10.078 The authentication process has succeeded.
*************************Raidus Ouptut for PEAP:**************************
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.7 seconds.
Waking up in 0.7 seconds.
Waking up in 0.1 seconds.
Waking up in 3.7 seconds.
Waking up in 0.1 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
[ldap] performing user authorization for anonymous
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: object not found or got ambiguous search result
[ldap] search failed
rlm_ldap: ldap_release_conn: Release Id: 0
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
Waking up in 0.9 seconds.
Waking up in 0.9 seconds.
Waking up in 0.9 seconds.
Waking up in 0.8 seconds.
Waking up in 0.8 seconds.
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
Waking up in 0.7 seconds.
Waking up in 3.7 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
**************************Radius ouput for EAP******************************
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.7 seconds.
Waking up in 0.7 seconds.
Waking up in 0.1 seconds.
Waking up in 3.7 seconds.
Waking up in 0.1 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
Waking up in 3.9 seconds.
Ready to process requests.
Hope that Helps. -
Shared Printer Bug After 10.7.4 HP LaserJet USB - Help?
Before the 10.7.4 update, my HP Color LaserJet CM2320nf multi fucntion printer worked just fine with the built in OS X print drivers. I had the printer shared on the network via my iMac (2011) over USB and other devices could print to it via Bonjour.
As soon as the 10.7.4 update hit, printing has been an issue. Whenever a print job is sent to the printer over the network the printer displays a 'Please Insert Paper' warning that has to be cleared on the device itself before the print will continue, even though the printer is full of paper... This does not happen when printing from the iMac itself, only when using the iMac to share the printer.
10.7.4 seems to have been a really buggy update as it has caused problems with Wifi becoming unusable until the iMac is rebooted.
Any ideas?You may have tried this already but in case you haven't, delete and re-add the printer on the client iMac - that is the one that is using the shared connection.
With regards to the message, do you think it is a result of the wrong paper size being requested or expecting paper to be in a particular cassette or tray, like the manual feed?
I also have to ask why you are sharing the printer? With the n and f suffix in the printer name I thought this would suggest the printer has its own Ethernet port and support wifi so it could therefore connect directly to your router rather than to another Mac. -
L2TP and fixed Framed IP Address for VPN user
Hi,
I have a running L2TP/IPsec VPN setup with authentification against a radius server (freeradius2 witch mysql). I would like to have some of my VPN users get a fixed IP address instead of the dynamically assigned IP Pool.
The radius server is returning the correct parameters, I think.
I hope someone can help me.
It´s a Cisco 892 Integrated Service Router.
Router Config:
=============================================================
Current configuration : 8239 bytes
! Last configuration change at 10:44:26 CEST Fri Mar 30 2012 by root
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service internal
hostname vpngw2
boot-start-marker
boot config usbflash0:CVO-BOOT.CFG
boot-end-marker
logging buffered 51200 warnings
enable secret 5 secret
aaa new-model
aaa authentication login default local group radius
aaa authentication login userauthen local group radius
aaa authentication ppp default group radius local
aaa authorization exec default local
aaa authorization network groupauthor local
aaa accounting delay-start
aaa accounting update newinfo
aaa accounting exec default
action-type start-stop
group radius
aaa accounting network default
action-type start-stop
group radius
aaa accounting resource default
action-type start-stop
group radius
aaa session-id common
clock timezone CET 1 0
clock summer-time CEST recurring last Sun Mar 2:00 last Sun Oct 3:00
ip domain name aspect-online.de
ip name-server 10.28.1.31
ip inspect WAAS flush-timeout 10
ip inspect name DEFAULT100 ftp
ip inspect name DEFAULT100 h323
ip inspect name DEFAULT100 icmp
ip inspect name DEFAULT100 netshow
ip inspect name DEFAULT100 rcmd
ip inspect name DEFAULT100 realaudio
ip inspect name DEFAULT100 rtsp
ip inspect name DEFAULT100 esmtp
ip inspect name DEFAULT100 sqlnet
ip inspect name DEFAULT100 streamworks
ip inspect name DEFAULT100 tftp
ip inspect name DEFAULT100 tcp
ip inspect name DEFAULT100 udp
ip inspect name DEFAULT100 vdolive
ip cef
no ipv6 cef
virtual-profile if-needed
multilink bundle-name authenticated
async-bootp dns-server 10.28.1.31
async-bootp nbns-server 10.28.1.31
vpdn enable
vpdn authen-before-forward
vpdn authorize directed-request
vpdn-group L2TP
! Default L2TP VPDN group
accept-dialin
protocol l2tp
virtual-template 1
no l2tp tunnel authentication
license udi pid -K9 sn FCZ
username root password 7 secret
ip ssh source-interface FastEthernet8
ip ssh version 2
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 3600
crypto isakmp key mykey address 0.0.0.0 no-xauth
crypto ipsec transform-set configl2tp esp-3des esp-sha-hmac
mode transport
crypto dynamic-map config-map-l2tp 10
set nat demux
set transform-set configl2tp
crypto map vpnl2tp 10 ipsec-isakmp dynamic config-map-l2tp
interface BRI0
no ip address
encapsulation hdlc
shutdown
isdn termination multidrop
interface FastEthernet0
no ip address
spanning-tree portfast
interface FastEthernet1
no ip address
spanning-tree portfast
<snip>
interface FastEthernet7
no ip address
spanning-tree portfast
interface FastEthernet8
ip address 10.28.1.97 255.255.255.0
ip access-group vpn_to_lan out
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface Virtual-Template1
ip unnumbered GigabitEthernet0
ip access-group vpn_to_inet_lan in
ip nat inside
ip virtual-reassembly in
peer default ip address pool l2tpvpnpool
ppp encrypt mppe 128
ppp authentication chap
interface GigabitEthernet0
description WAN Port
ip address x.x.x.39 255.255.255.0
ip access-group from_inet in
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
crypto map vpnl2tp
interface Vlan1
no ip address
shutdown
ip local pool l2tpvpnpool 192.168.252.3 192.168.252.199
ip local pool remotepool 192.168.252.240 192.168.252.243
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat log translations syslog
ip nat inside source route-map natmap interface GigabitEthernet0 overload
ip route 0.0.0.0 0.0.0.0 x.x.x.33
ip access-list extended from_inet
<snip>
ip access-list extended nat_clients
permit ip 192.168.252.0 0.0.0.255 any
ip access-list extended vpn_to_inet_lan
<snip>
ip access-list extended vpn_to_lan
<snip>
deny ip any any log-input
logging trap debugging
logging facility local2
logging 10.28.1.42
no cdp run
route-map natmap permit 10
match ip address nat_clients
radius-server attribute 8 include-in-access-req
radius-server host 10.27.1.228 auth-port 1812 acct-port 1813
radius-server key 7 mykey
radius-server vsa send accounting
radius-server vsa send authentication
control-plane
mgcp profile default
banner login ^C
Hostname: vpngw2
Model: Cisco 892 Integrated Service Router
Description: L2TP/IPsec VPN Gateway with Radius Auth
^C
line con 0
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
=============================================================
User Config in Radius (tying multiple attributes):
=============================================================
Attribute | op | Value
Service-Type | = | Framed-User
Cisco-AVPair | = | vpdn:ip-addresses=192.168.252.220
Framed-IP-Address | := | 192.168.252.221
Cisco-AVPair | = | ip:addr-pool=remotepool
=============================================================
Debug Log from freeradius2:
=============================================================
rad_recv: Access-Request packet from host 10.28.1.97 port 1645, id=7, length=100
Framed-Protocol = PPP
User-Name = "me1"
CHAP-Password = 0x01b8b897de00317a75c68ee9ce473cf8b8
Connect-Info = "100000000"
NAS-Port-Type = Sync
NAS-Port = 10007
NAS-Port-Id = "Uniq-Sess-ID7"
Service-Type = Framed-User
NAS-IP-Address = 10.28.1.97
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[chap] Setting 'Auth-Type := CHAP'
++[chap] returns ok
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "me1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
[files] users: Matched entry DEFAULT at line 172
++[files] returns ok
[sql] expand: %{User-Name} -> me1
[sql] sql_set_user escaped user --> 'me1'
rlm_sql (sql): Reserving sql socket id: 4
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'me1' ORDER BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'me1' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'me1' ORDER BY priority
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = CHAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group CHAP {...}
[chap] login attempt by "me1" with CHAP password
[chap] Using clear text password "test" for user me1 authentication.
[chap] chap user me1 authenticated succesfully
++[chap] returns ok
Login OK: [me1/<CHAP-Password>] (from client vpngw2 port 10007)
# Executing section post-auth from file /etc/raddb/sites-enabled/default
+- entering group post-auth {...}
++[exec] returns noop
Sending Access-Accept of id 7 to 10.28.1.97 port 1645
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
Framed-IP-Address := 192.168.252.221
Cisco-AVPair = "vpdn:ip-addresses=192.168.252.220"
Service-Type = Framed-User
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 10.28.1.97 port 1646, id=19, length=213
Acct-Session-Id = "00000011"
Tunnel-Type:0 = L2TP
Tunnel-Medium-Type:0 = IPv4
Tunnel-Server-Endpoint:0 = "x.x.x.39"
Tunnel-Client-Endpoint:0 = "x.x.x.34"
Tunnel-Assignment-Id:0 = "L2TP"
Tunnel-Client-Auth-Id:0 = "me1"
Tunnel-Server-Auth-Id:0 = "vpngw2"
Framed-Protocol = PPP
Framed-IP-Address = 192.168.252.9
User-Name = "me1"
Cisco-AVPair = "connect-progress=LAN Ses Up"
Acct-Authentic = RADIUS
Acct-Status-Type = Start
Connect-Info = "100000000"
NAS-Port-Type = Sync
NAS-Port = 10007
NAS-Port-Id = "Uniq-Sess-ID7"
Service-Type = Framed-User
NAS-IP-Address = 10.28.1.97
Acct-Delay-Time = 0
# Executing section preacct from file /etc/raddb/sites-enabled/default
+- entering group preacct {...}
++[preprocess] returns ok
[acct_unique] Hashing 'NAS-Port = 10007,Client-IP-Address = 10.28.1.97,NAS-IP-Address = 10.28.1.97,Acct-Session-Id = "00000011",User-Name = "me1"'
[acct_unique] Acct-Unique-Session-ID = "1fdd95abea6cfac2".
++[acct_unique] returns ok
[suffix] No '@' in User-Name = "me1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[files] returns noop
# Executing section accounting from file /etc/raddb/sites-enabled/default
+- entering group accounting {...}
[detail] expand: %{Packet-Src-IP-Address} -> 10.28.1.97
[detail] expand: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radius/radacct/10.28.1.97/detail-20120330
[detail] /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.28.1.97/detail-20120330
[detail] expand: %t -> Fri Mar 30 11:20:07 2012
++[detail] returns ok
++[unix] returns ok
[radutmp] expand: /var/log/radius/radutmp -> /var/log/radius/radutmp
[radutmp] expand: %{User-Name} -> me1
++[radutmp] returns ok
[sql] expand: %{User-Name} -> me1
[sql] sql_set_user escaped user --> 'me1'
[sql] expand: %{Acct-Delay-Time} -> 0
[sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
rlm_sql (sql): Reserving sql socket id: 3
rlm_sql (sql): Released sql socket id: 3
++[sql] returns ok
++[exec] returns noop
[attr_filter.accounting_response] expand: %{User-Name} -> me1
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated
Sending Accounting-Response of id 19 to 10.28.1.97 port 1646
Finished request 1.
Cleaning up request 1 ID 19 with timestamp +53
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 10.28.1.97 port 1646, id=20, length=407
Acct-Session-Id = "00000011"
Tunnel-Type:0 = L2TP
Tunnel-Medium-Type:0 = IPv4
Tunnel-Server-Endpoint:0 = "x.x.x.39"
Tunnel-Client-Endpoint:0 = "x.x.x.34"
Tunnel-Assignment-Id:0 = "L2TP"
Tunnel-Client-Auth-Id:0 = "me1"
Tunnel-Server-Auth-Id:0 = "vpngw2"
Framed-Protocol = PPP
Framed-IP-Address = 192.168.252.9
Cisco-AVPair = "ppp-disconnect-cause=Received LCP TERMREQ from peer"
User-Name = "me1"
Acct-Authentic = RADIUS
Cisco-AVPair = "connect-progress=LAN Ses Up"
Cisco-AVPair = "nas-tx-speed=100000000"
Cisco-AVPair = "nas-rx-speed=100000000"
Acct-Session-Time = 5
Acct-Input-Octets = 5980
Acct-Output-Octets = 120
Acct-Input-Packets = 47
Acct-Output-Packets = 11
Acct-Terminate-Cause = User-Request
Cisco-AVPair = "disc-cause-ext=PPP Receive Term"
Acct-Status-Type = Stop
Connect-Info = "100000000"
NAS-Port-Type = Sync
NAS-Port = 10007
NAS-Port-Id = "Uniq-Sess-ID7"
Service-Type = Framed-User
NAS-IP-Address = 10.28.1.97
Acct-Delay-Time = 0
# Executing section preacct from file /etc/raddb/sites-enabled/default
+- entering group preacct {...}
++[preprocess] returns ok
[acct_unique] Hashing 'NAS-Port = 10007,Client-IP-Address = 10.28.1.97,NAS-IP-Address = 10.28.1.97,Acct-Session-Id = "00000011",User-Name = "me1"'
[acct_unique] Acct-Unique-Session-ID = "1fdd95abea6cfac2".
++[acct_unique] returns ok
[suffix] No '@' in User-Name = "me1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[files] returns noop
# Executing section accounting from file /etc/raddb/sites-enabled/default
+- entering group accounting {...}
[detail] expand: %{Packet-Src-IP-Address} -> 10.28.1.97
[detail] expand: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radius/radacct/10.28.1.97/detail-20120330
[detail] /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.28.1.97/detail-20120330
[detail] expand: %t -> Fri Mar 30 11:20:12 2012
++[detail] returns ok
++[unix] returns ok
[radutmp] expand: /var/log/radius/radutmp -> /var/log/radius/radutmp
[radutmp] expand: %{User-Name} -> me1
++[radutmp] returns ok
[sql] expand: %{User-Name} -> me1
[sql] sql_set_user escaped user --> 'me1'
[sql] expand: %{Acct-Input-Gigawords} ->
[sql] ... expanding second conditional
[sql] expand: %{Acct-Input-Octets} -> 5980
[sql] expand: %{Acct-Output-Gigawords} ->
[sql] ... expanding second conditional
[sql] expand: %{Acct-Output-Octets} -> 120
[sql] expand: %{Acct-Delay-Time} -> 0
[sql] expand: UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}' -> UPDATE radacct SET acctstoptime = '2012-03-30 11:20:12', acctsessiontime = '5', acctinputoctets = '0' << 32 | '5980', acctoutputoctets = '0' << 32 |
rlm_sql (sql): Reserving sql socket id: 2
rlm_sql (sql): Released sql socket id: 2
++[sql] returns ok
++[exec] returns noop
[attr_filter.accounting_response] expand: %{User-Name} -> me1
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated
Sending Accounting-Response of id 20 to 10.28.1.97 port 1646
Finished request 2.
Cleaning up request 2 ID 20 with timestamp +58
Going to the next request
Waking up in 0.1 seconds.
Cleaning up request 0 ID 7 with timestamp +53
Ready to process requests.
=============================================================
Log From Cisco Router:
=============================================================
Mar 30 11:20:07 vpngw2 1217: Mar 30 09:21:51.414: RADIUS/ENCODE(00000015):Orig. component type = VPDN
Mar 30 11:20:07 vpngw2 1218: Mar 30 09:21:51.414: RADIUS: DSL line rate attributes successfully added
Mar 30 11:20:07 vpngw2 1219: Mar 30 09:21:51.414: RADIUS(00000015): Config NAS IP: 0.0.0.0
Mar 30 11:20:07 vpngw2 1220: Mar 30 09:21:51.414: RADIUS(00000015): Config NAS IPv6: ::
Mar 30 11:20:07 vpngw2 1221: Mar 30 09:21:51.414: RADIUS/ENCODE: No idb found! Framed IP Addr might not be included
Mar 30 11:20:07 vpngw2 1222: Mar 30 09:21:51.414: RADIUS/ENCODE(00000015): acct_session_id: 17
Mar 30 11:20:07 vpngw2 1223: Mar 30 09:21:51.414: RADIUS(00000015): sending
Mar 30 11:20:07 vpngw2 1224: Mar 30 09:21:51.418: RADIUS/ENCODE: Best Local IP-Address 10.28.1.97 for Radius-Server 10.27.1.228
Mar 30 11:20:07 vpngw2 1225: Mar 30 09:21:51.418: RADIUS(00000015): Send Access-Request to 10.27.1.228:1812 id 1645/7, len 100
Mar 30 11:20:07 vpngw2 1226: Mar 30 09:21:51.418: RADIUS: authenticator DE 5F 2E 3E EF BF 50 F4 - 49 C3 4F BE 1A 66 72 22
Mar 30 11:20:07 vpngw2 1227: Mar 30 09:21:51.418: RADIUS: Framed-Protocol [7] 6 PPP [1]
Mar 30 11:20:07 vpngw2 1228: Mar 30 09:21:51.418: RADIUS: User-Name [1] 5 "me1"
Mar 30 11:20:07 vpngw2 1229: Mar 30 09:21:51.418: RADIUS: CHAP-Password [3] 19 *
Mar 30 11:20:07 vpngw2 1230: Mar 30 09:21:51.418: RADIUS: Connect-Info [77] 11 "100000000"
Mar 30 11:20:07 vpngw2 1231: Mar 30 09:21:51.418: RADIUS: NAS-Port-Type [61] 6 Sync [1]
Mar 30 11:20:07 vpngw2 1232: Mar 30 09:21:51.418: RADIUS: NAS-Port [5] 6 10007
Mar 30 11:20:07 vpngw2 1233: Mar 30 09:21:51.418: RADIUS: NAS-Port-Id [87] 15 "Uniq-Sess-ID7"
Mar 30 11:20:07 vpngw2 1234: Mar 30 09:21:51.418: RADIUS: Service-Type [6] 6 Framed [2]
Mar 30 11:20:07 vpngw2 1235: Mar 30 09:21:51.418: RADIUS: NAS-IP-Address [4] 6 10.28.1.97
Mar 30 11:20:07 vpngw2 1236: Mar 30 09:21:51.418: RADIUS(00000015): Sending a IPv4 Radius Packet
Mar 30 11:20:07 vpngw2 1237: Mar 30 09:21:51.418: RADIUS(00000015): Started 5 sec timeout
Mar 30 11:20:07 vpngw2 1238: Mar 30 09:21:51.422: RADIUS: Received from id 1645/7 10.27.1.228:1812, Access-Accept, len 85
Mar 30 11:20:07 vpngw2 1239: Mar 30 09:21:51.422: RADIUS: authenticator 25 CD 93 D5 78 2C F4 4F - F2 66 2C 45 8D D4 E1 16
Mar 30 11:20:07 vpngw2 1240: Mar 30 09:21:51.422: RADIUS: Framed-Protocol [7] 6 PPP [1]
Mar 30 11:20:07 vpngw2 1241: Mar 30 09:21:51.422: RADIUS: Framed-Compression [13] 6 VJ TCP/IP Header Compressi[1]
Mar 30 11:20:07 vpngw2 1242: Mar 30 09:21:51.422: RADIUS: Framed-IP-Address [8] 6 192.168.252.221
Mar 30 11:20:07 vpngw2 1243: Mar 30 09:21:51.422: RADIUS: Vendor, Cisco [26] 41
Mar 30 11:20:07 vpngw2 1244: Mar 30 09:21:51.422: RADIUS: Cisco AVpair [1] 35 "vpdn:ip-addresses=192.168.252.220"
Mar 30 11:20:07 vpngw2 1245: Mar 30 09:21:51.422: RADIUS: Service-Type [6] 6 Framed [2]
Mar 30 11:20:07 vpngw2 1246: Mar 30 09:21:51.426: RADIUS(00000015): Received from id 1645/7
Mar 30 11:20:07 vpngw2 1247: Mar 30 09:21:51.438: %LINK-3-UPDOWN: Interface Virtual-Access3, changed state to up
Mar 30 11:20:07 vpngw2 1248: Mar 30 09:21:51.442: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access3, changed state to up
Mar 30 11:20:07 vpngw2 1249: Mar 30 09:21:51.478: RADIUS/ENCODE(00000015):Orig. component type = VPDN
Mar 30 11:20:07 vpngw2 1250: Mar 30 09:21:51.478: RADIUS(00000015): Config NAS IP: 0.0.0.0
Mar 30 11:20:07 vpngw2 1251: Mar 30 09:21:51.478: RADIUS(00000015): Config NAS IPv6: ::
Mar 30 11:20:07 vpngw2 1252: Mar 30 09:21:51.478: RADIUS(00000015): sending
Mar 30 11:20:07 vpngw2 1253: Mar 30 09:21:51.478: RADIUS/ENCODE: Best Local IP-Address 10.28.1.97 for Radius-Server 10.27.1.228
Mar 30 11:20:07 vpngw2 1254: Mar 30 09:21:51.478: RADIUS(00000015): Send Accounting-Request to 10.27.1.228:1813 id 1646/19, len 213
Mar 30 11:20:07 vpngw2 1255: Mar 30 09:21:51.478: RADIUS: authenticator 1B E0 A3 DF 16 7F F1 8D - E5 7F BD 88 50 01 73 53
Mar 30 11:20:07 vpngw2 1256: Mar 30 09:21:51.478: RADIUS: Acct-Session-Id [44] 10 "00000011"
Mar 30 11:20:07 vpngw2 1257: Mar 30 09:21:51.478: RADIUS: Tunnel-Type [64] 6 00:
Mar 30 11:20:07 vpngw2 1258: L2TP [3]
Mar 30 11:20:07 vpngw2 1259: Mar 30 09:21:51.478: RADIUS: Tunnel-Medium-Type [65] 6 00:IPv4 [1]
Mar 30 11:20:07 vpngw2 1260: Mar 30 09:21:51.478: RADIUS: Tunnel-Server-Endpoi[67] 16 "x.x.x.39"
Mar 30 11:20:07 vpngw2 1261: Mar 30 09:21:51.478: RADIUS: Tunnel-Client-Endpoi[66] 16 "x.x.x.34"
Mar 30 11:20:07 vpngw2 1262: Mar 30 09:21:51.478: RADIUS: Tunnel-Assignment-Id[82] 6 "L2TP"
Mar 30 11:20:07 vpngw2 1263: Mar 30 09:21:51.478: RADIUS: Tunnel-Client-Auth-I[90] 5 "me1"
Mar 30 11:20:07 vpngw2 1264: Mar 30 09:21:51.478: RADIUS: Tunnel-Server-Auth-I[91] 8 "vpngw2"
Mar 30 11:20:07 vpngw2 1265: Mar 30 09:21:51.478: RADIUS: Framed-Protocol [7] 6 PPP [1]
Mar 30 11:20:07 vpngw2 1266: Mar 30 09:21:51.478: RADIUS: Framed-IP-Address [8] 6 192.168.252.9
Mar 30 11:20:07 vpngw2 1267: Mar 30 09:21:51.478: RADIUS: User-Name [1] 5 "me1"
Mar 30 11:20:07 vpngw2 1268: Mar 30 09:21:51.478: RADIUS: Vendor, Cisco [26] 35
Mar 30 11:20:07 vpngw2 1269: Mar 30 09:21:51.478: RADIUS: Cisco AVpair [1] 29 "connect-progress=LAN Ses Up"
Mar 30 11:20:07 vpngw2 1270: Mar 30 09:21:51.478: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
Mar 30 11:20:07 vpngw2 1271: Mar 30 09:21:51.482: RADIUS: Acct-Status-Type [40] 6 Start [1]
Mar 30 11:20:07 vpngw2 1272: Mar 30 09:21:51.482: RADIUS: Connect-Info [77] 11 "100000000"
Mar 30 11:20:07 vpngw2 1273: Mar 30 09:21:51.482: RADIUS: NAS-Port-Type [61] 6 Sync [1]
Mar 30 11:20:07 vpngw2 1274: Mar 30 09:21:51.482: RADIUS: NAS-Port [5] 6 10007
Mar 30 11:20:08 vpngw2 1275: Mar 30 09:21:51.482: RADIUS: NAS-Port-Id [87] 15 "Uniq-Sess-ID7"
Mar 30 11:20:08 vpngw2 1276: Mar 30 09:21:51.482: RADIUS: Service-Type [6] 6 Framed [2]
Mar 30 11:20:08 vpngw2 1277: Mar 30 09:21:51.482: RADIUS: NAS-IP-Address [4] 6 10.28.1.97
Mar 30 11:20:08 vpngw2 1278: Mar 30 09:21:51.482: RADIUS: Acct-Delay-Time [41] 6 0
Mar 30 11:20:08 vpngw2 1279: Mar 30 09:21:51.482: RADIUS(00000015): Sending a IPv4 Radius Packet
Mar 30 11:20:08 vpngw2 1280: Mar 30 09:21:51.482: RADIUS(00000015): Started 5 sec timeout
Mar 30 11:20:08 vpngw2 1281: Mar 30 09:21:51.486: RADIUS: Received from id 1646/19 10.27.1.228:1813, Accounting-response, len 20
Mar 30 11:20:08 vpngw2 1282: Mar 30 09:21:51.486: RADIUS: authenticator 73 5E 95 46 5B 57 B1 4A - 44 4F 7C 71 F0 26 AA A4
Mar 30 11:20:12 vpngw2 1283: Mar 30 09:21:56.282: RADIUS/ENCODE(00000015):Orig. component type = VPDN
Mar 30 11:20:12 vpngw2 1284: Mar 30 09:21:56.282: RADIUS(00000015): Config NAS IP: 0.0.0.0
Mar 30 11:20:12 vpngw2 1285: Mar 30 09:21:56.282: RADIUS(00000015): Config NAS IPv6: ::
Mar 30 11:20:12 vpngw2 1286: Mar 30 09:21:56.282: RADIUS(00000015): sending
Mar 30 11:20:12 vpngw2 1287: Mar 30 09:21:56.282: RADIUS/ENCODE: Best Local IP-Address 10.28.1.97 for Radius-Server 10.27.1.228
Mar 30 11:20:12 vpngw2 1288: Mar 30 09:21:56.286: RADIUS(00000015): Send Accounting-Request to 10.27.1.228:1813 id 1646/20, len 407
Mar 30 11:20:12 vpngw2 1289: Mar 30 09:21:56.286: RADIUS: authenticator 26 7A 27 91 EB 3F 34 C6 - DB 2D 88 F8 B1 A4 C1 12
Mar 30 11:20:12 vpngw2 1290: Mar 30 09:21:56.286: RADIUS: Acct-Session-Id [44] 10 "00000011"
Mar 30 11:20:12 vpngw2 1291: Mar 30 09:21:56.286: RADIUS: Tunnel-Type [64] 6 00:
Mar 30 11:20:12 vpngw2 1292: L2TP [3]
Mar 30 11:20:12 vpngw2 1293: Mar 30 09:21:56.286: RADIUS: Tunnel-Medium-Type [65] 6 00:IPv4 [1]
Mar 30 11:20:12 vpngw2 1294: Mar 30 09:21:56.286: RADIUS: Tunnel-Server-Endpoi[67] 16 "x.x.x.39"
Mar 30 11:20:12 vpngw2 1295: Mar 30 09:21:56.286: RADIUS: Tunnel-Client-Endpoi[66] 16 "x.x.x.34"
Mar 30 11:20:12 vpngw2 1296: Mar 30 09:21:56.286: RADIUS: Tunnel-Assignment-Id[82] 6 "L2TP"
Mar 30 11:20:12 vpngw2 1297: Mar 30 09:21:56.286: RADIUS: Tunnel-Client-Auth-I[90] 5 "me1"
Mar 30 11:20:12 vpngw2 1298: Mar 30 09:21:56.286: RADIUS: Tunnel-Server-Auth-I[91] 8 "vpngw2"
Mar 30 11:20:12 vpngw2 1299: Mar 30 09:21:56.286: RADIUS: Framed-Protocol [7] 6 PPP [1]
Mar 30 11:20:12 vpngw2 1300: Mar 30 09:21:56.286: RADIUS: Framed-IP-Address [8] 6 192.168.252.9
Mar 30 11:20:12 vpngw2 1301: Mar 30 09:21:56.286: RADIUS: Vendor, Cisco [26] 59
Mar 30 11:20:12 vpngw2 1302: Mar 30 09:21:56.286: RADIUS: Cisco AVpair [1] 53 "ppp-disconnect-cause=Received LCP TERMREQ from peer"
Mar 30 11:20:12 vpngw2 1303: Mar 30 09:21:56.286: RADIUS: User-Name [1] 5 "me1"
Mar 30 11:20:12 vpngw2 1304: Mar 30 09:21:56.286: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
Mar 30 11:20:12 vpngw2 1305: Mar 30 09:21:56.286: RADIUS: Vendor, Cisco [26] 35
Mar 30 11:20:12 vpngw2 1306: Mar 30 09:21:56.286: RADIUS: Cisco AVpair [1] 29 "connect-progress=LAN Ses Up"
Mar 30 11:20:12 vpngw2 1307: Mar 30 09:21:56.286: RADIUS: Vendor, Cisco [26] 30
Mar 30 11:20:12 vpngw2 1308: Mar 30 09:21:56.286: RADIUS: Cisco AVpair [1] 24 "nas-tx-speed=100000000"
Mar 30 11:20:12 vpngw2 1309: Mar 30 09:21:56.286: RADIUS: Vendor, Cisco [26] 30
Mar 30 11:20:12 vpngw2 1310: Mar 30 09:21:56.286: RADIUS: Cisco AVpair [1] 24 "nas-rx-speed=100000000"
Mar 30 11:20:12 vpngw2 1311: Mar 30 09:21:56.286: RADIUS: Acct-Session-Time [46] 6 5
Mar 30 11:20:12 vpngw2 1312: Mar 30 09:21:56.286: RADIUS: Acct-Input-Octets [42] 6 5980
Mar 30 11:20:12 vpngw2 1313: Mar 30 09:21:56.286: RADIUS: Acct-Output-Octets [43] 6 120
Mar 30 11:20:12 vpngw2 1314: Mar 30 09:21:56.286: RADIUS: Acct-Input-Packets [47] 6 47
Mar 30 11:20:12 vpngw2 1315: Mar 30 09:21:56.286: RADIUS: Acct-Output-Packets [48] 6 11
Mar 30 11:20:12 vpngw2 1316: Mar 30 09:21:56.286: RADIUS: Acct-Terminate-Cause[49] 6 user-request [1]
Mar 30 11:20:12 vpngw2 1317: Mar 30 09:21:56.286: RADIUS: Vendor, Cisco [26] 39
Mar 30 11:20:12 vpngw2 1318: Mar 30 09:21:56.286: RADIUS: Cisco AVpair [1] 33 "disc-cause-ext=PPP Receive Term"
Mar 30 11:20:12 vpngw2 1319: Mar 30 09:21:56.286: RADIUS: Acct-Status-Type [40] 6 Stop [2]
Mar 30 11:20:12 vpngw2 1320: Mar 30 09:21:56.286: RADIUS: Connect-Info [77] 11 "100000000"
Mar 30 11:20:12 vpngw2 1321: Mar 30 09:21:56.286: RADIUS: NAS-Port-Type [61] 6 Sync [1]
Mar 30 11:20:12 vpngw2 1322: Mar 30 09:21:56.286: RADIUS: NAS-Port [5] 6 10007
Mar 30 11:20:12 vpngw2 1323: Mar 30 09:21:56.286: RADIUS: NAS-Port-Id [87] 15 "Uniq-Sess-ID7"
Mar 30 11:20:12 vpngw2 1324: Mar 30 09:21:56.286: RADIUS: Service-Type [6] 6 Framed [2]
Mar 30 11:20:12 vpngw2 1325: Mar 30 09:21:56.286: RADIUS: NAS-IP-Address [4] 6 10.28.1.97
Mar 30 11:20:12 vpngw2 1326: Mar 30 09:21:56.286: RADIUS: Acct-Delay-Time [41] 6 0
Mar 30 11:20:12 vpngw2 1327: Mar 30 09:21:56.286: RADIUS(00000015): Sending a IPv4 Radius Packet
Mar 30 11:20:12 vpngw2 1328: Mar 30 09:21:56.286: RADIUS(00000015): Started 5 sec timeout
Mar 30 11:20:12 vpngw2 1329: Mar 30 09:21:56.294: RADIUS: Received from id 1646/20 10.27.1.228:1813, Accounting-response, len 20
Mar 30 11:20:12 vpngw2 1330: Mar 30 09:21:56.294: RADIUS: authenticator E1 09 A6 6D 91 C6 B1 B3 - 78 00 FF 4F 25 32 C6 B5
Mar 30 11:20:12 vpngw2 1331: Mar 30 09:21:56.406: %LINK-3-UPDOWN: Interface Virtual-Access3, changed state to down
Mar 30 11:20:12 vpngw2 1332: Mar 30 09:21:56.410: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access3, changed state to down
=============================================================I found the failure.
In the cisco config it must be
aaa authorization network default group radius local
not
aaa authorization network groupauthor local -
Canon LBP5000 does not work after Leopard Upgrade
Hi all,
We have a Canon LBP5000 that is directly connected to one of our iMac's and worked like a charm when we were using Tiger. After upgrading to Leopard, everything went weird. It is still installed but when we tried printing, we get a 'Load Paper' warning from the printer. After checking to make sure that the default paper was all in A4 format it still wouldn't print. We then tried hooking it up to an Airport Express to share and while trying to add it via Bonjour, an Error 9672. We're seriously looking at getting a new clour laser printer that works with Leopard as at this point in time, there is yet to be found a driver from Canon that works with Leopard. Any suggestions of colour laser printers that work with Leopard or solutions to our problems ?Hi Donny/PJB,
I did look and googled the drivers but the European site has outdated ones. We were actually using Japanese drivers CAPT (Ver. 1.60) for Tiger but it doesn't work now for Leopard. PJB, thanks for pointing out your post and I had a run through the Japanese site but it's all in Japanese
Anyway, I basically used common sense and updated the CAPT to (Ver. 1.61) but it still doesn't work after installing it. Every time I try to print or so a test print, the progress went Printing to Stopped.
When we click Resume it doesn't do anything and after 4 clicks, there was a short 'Fatal: Failed to load module' message pops up in the Print Queue dialog box. Has anyone actually have a Canon LBP 5000 printer that has worked with Leopard ? That is my question really...sigh. -
Laserwriter 8500 works on OS9 but not OSX
I have a laserwriter 8500 problem. I just bought a new G5 dual and I have the 8500 pluged in through a router. I can print 'only' using microsoft word that is running on classic. whenever i try to print with any other applications that either run on classic or native on OSX I get an out of paper error. The 8500 shows the yellow out of paper light even though the laserwriter has paper. I can go to my G4 that is on the same network and print to the same printer without the 'out of paper' error.
So bottom line is, for some reason running OSX, the ONLY way I can get the 8500 to print and not give the out of paper warning is to be priniting out of only one application, MS Word reunning on classic.
What gives? Obviously it is not the printer, as I can print in one application running classic, and I can print from another (G4) mac on the same network... What is really odd is that the printer shows lights indicating it is out of paper, and it does not change the green (OK) light to yellow until after I request printing on OSX in any application other that MSWord running on classic.
I would really appreciate so helpThis printer must have one port of every description! Which of the many methods of cabling are you using to talk to this printer? Are you plugging and unplugging, or is the same cabling set-up used in each case?
-
Booklet .pdf with crop marks, booklet doesn't fit the current paper size warning
Hello. I am on XP using CS4 InDesign.
I have the document set up as 4 pages, each 8.5 x 11, however, when creating a booklet .pdf, I mean it to be 2 pages 11x17.
When I add in the crop marks they do not appear on the .pdf when it is created. I receive a warning in the booklet diaglog that the booklet doesn't fit the current paper size and it says to specify a larger paper size.
What can I do to have the crop marks on my file? I understand the .pdf will be a little larger than 11x17 in order to fit the crop marks.
Thanks for any help in advance.Hi Peter,
Thank you. I did try that first, but now I figured out what I did wrong. When the .pdf was made and opened, I cropoped the page according to the marks, but the page remained 12 x 18 instead of 11x17. I made sure that the "automatically adjust to fit marks and bleeds" and "use document bleed settings" was checked in the booklet dialog and print InDesign dialog.
When I cropped the page again to make sure I sized it correctly, it was 11x17.
Thank you!!! -
I cannot clear a paper mismatch warning from the printer.
I keep getting a paper mismatch warning on my 6500 E709 n series printer. The settings have not changed and I have not added or removed any paper from the printer.
Powering down the printer & restarting did not work nor does removing the paper & restarting. How do I clear this mismatch error so I can print?Hi Jancie,
I am sorry to hear that you are receiving the error message "Paper Mismatch". I would like to help. I am unsure of which printer model you have so I will be posting troubleshooting information for the Officejet 6500 E709n model. If you have a different model, please respond with your model and also the operating system you are working with. I will post some troubleshooting and information below for you.
If you do have the Officejet 6500, click here and choose your operating system and find "Paper Mismatch" in the list of troubleshooting guides and follow the instructions.
If you need help finding your model number, click here.
If you need help finding your operating system, click here for Windows or here for Mac.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I'm getting a "paper jam" warning in a HP 4500 wireless. There is no jam.
Officejet 4500 wireless....windowsXP-home...."paper jam"
There is no paper jam!HI jimvt75,
Give this article a look and try the steps in it. It will help with the false paper jam message you are getting.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP. -
How to print a report which is consist a paper parameter form
Hi !
I have created a report file with paper parameter form and also create a form. Now , when I try to run this form it display
REP-0788: Warning: The value of restricted LOV parameter ppass is not among the selectable values.
USER ID (a combo box with data)
PASSWORD (a combo box with data)
After click on submit the query button window dispaly a message run successfuly,But it does not print the report's data, it prints only paper parameter contents.
i.e. REP-0788: Warning: The value of restricted LOV parameter ppass is not among the selectable values.
USER ID (a combo box with data)
PASSWORD (a combo box with data)
I used the following codes
PROCEDURE RUN_REPORT1(vc_reportoj Varchar2, vc_reportserver varchar2, vc_runformat varchar2,report_otherparam VARCHAR2, pvar varchar2) IS
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100); /* unique id for each Reportrequest */
vc_rep_status VARCHAR2(100); /* status of the Report job */
vjob_id VARCHAR2(100); /* job_id as number only string*/
vfilename varchar2(255);
vport varchar2(50);
hidden_action VARCHAR2(2000) :='';
v_report_other VARCHAR2(4000) :='';
i number (5);
c char;
c_old char;
c_new char;
BEGIN
/* Get a handle to the Report Object itself. */
v_report_id:= FIND_REPORT_OBJECT(vc_reportoj);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_FILENAME,name_in(':parameter.path') ||'\'||NAME_IN('CTL_REPORTS.REPORT_NAME'));
if pvar = 'FILE' then
vfilename := CLIENT_GET_FILE_NAME('c:\',null, 'All Files (*.*)|*.*|',SAVE_FILE);
if vfilename IS NOT NULL THEN
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESNAME, vfilename||'.rtf');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,vc_reportserver);
hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY (v_report_id,REPORT_DESFORMAT);
hidden_action := hidden_action ||'&userid='||get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
c_old :='@';
FOR i IN 1..LENGTH(report_otherparam) LOOP
c_new:= substr(report_otherparam,i,1);
IF (c_new ='') THEN
c:='&';
ELSE
c:= c_new;
END IF;
-- eliminate multiple blanks
IF (c_old ='' and c_new ='') THEN
null;
ELSE
v_report_other := v_report_other||c;
END IF;
c_old := c_new;
end loop;
hidden_action := hidden_action ||'&'|| v_report_other;
hidden_action := 'http://127.0.0.1:8889/reports/rwservlet'||'?_hidden_server='||vc_reportserver|| encode(hidden_action);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'pfaction='||hidden_action||''||report_otherparam);
-- run Reports
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,length(vc_reportserver)+2,length(vc_ReportServerJob));
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT ('http://127.0.0.1:8889/reports/rwservlet/getjobid'||vjob_id||'?server='||vc_reportserver||'&_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
ELSE
RETURN;
end if;
This is the part of the procedure.See Viewing Pages in Printer Friendly Mode and Selecting a Printer Friendly Template for an Application
Thanks,
Vikram -
Yesterday, while attempting to print a Word Perfect 5 document (my word processing app), the printer( HP Office Jet 6500 E709) operated, passed the paper through and made the printing sounds, but no ink was applied to the paper. I thought perhaps the cartridge had run dry, although I usually get a warning and then can visually see from the finished print job when the ink cartridge is empty. My PC is running Win XP Professional, and the printer has never been a problem. I installed a new Black cartridge and successfully printed off a test page. Still could not print the WP document, or any other document from "my documents" file. Tried the "copy" function and the printer worked fine. Still no document printing. Printed a Yahoo e-mail using the "print" option at the top of the message, and the printer worked fine. When printing from that icon, I got a pop-up display with a menu option labeled "preferences." This is the standard routine when printing an e-mail. I clicked on preferences saw that they were set at automatic, portrait, and color. I changed color to Gray Scale, black ink only, and the page printed properly. This has always been the routine, whether printing an e-mail of printing a document. Then I went to my WP document and hit the printer icon on my task bar and got a different pop- up display. In this display there was no "preferences" option, only a "properties" option. When I pressed that button I saw a setting that said HP Photo paper, portrait, grayscale high quality. I changed the paper type[ to "automatic" but cold not change the color option to black ink only. I closed the menu and attempted to print. No ink. I repeated the steps and discovered that the properties had reverted back to HP Photo Paper. I attempted to print from the File menu and by using Cntrl P. Neither option worked and the "Pproperties" continued to show HP photo paper, even though I changed it after each failed attempt and the hopper was full of white ink jet paper. I deinstalled the HP printer and reinstalled it using the original discs. Since the reinstall, the preferences are set as desired, and remain that way every time I chack them. I can print a test page, copy and print email. However, when printing from the print option in File, the task bar printer icon or Cntrl P, the pages continue to be processed but no ink is applied. The pop-up menu that appears when using any of these commands always contains the term "properties" and those properties always show HP photo paper as the stock being used. Regaerdless of how many times I correct the paper type, the entry reverts to HP photo paper after each attempt at printing.
I have the B8550 too, and I just assumed that since it's a fairly high-end printer, it would support the highest-end HP photo paper (i.e., Premium Plus). However, the manual states:
HP Premium and HP Premium Plus photo papers are not supported with this product.
Now, I don't know if that means you shouldn't use it, or that the advanced features won't work, or ??? Or if you should use it, what settings to use (since that type of paper is not listed in the options on the drop-down menu.) I have used the Premium Plus Soft Gloss without any problems. But HP seems to think that the highest quality paper you can use with this printer is "Advanced," which is their third-grade paper. Not exactly what I'd expect from this type of printer. -
I would really appreciate some help with my search & results page that is now throwing up the following error:
Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line (the line number refers to the following code:
mysql_free_result($RSsearchforsale);
mysql_free_result($RsSearchForSale2);
mysql_free_result($RsSearchForSale3);
mysql_free_result($RsSearchForSale4);
I am new to php and am setting up a dynamic site in Dreamweaver (thanks to the Missing Manual – very helpful). I apologise in advanced for my lengthy description of the problem (perhaps get yourself a drink before continuing!)
I have a Search page with 4 list menus where the user can select an option from ANY or ALL of the menus, if a menu is not selected the value posted to the results page will be 'zzz'.
On the results page I have 4 recordsets, all getting the correct results, only one recordset is required to run depending on how many of the menus from the search page have been selected and a test is run before executing the sql using a SWITCH statement checking how many of the menus had passed the 'zzz' values from the Search page if you see what I mean. The results page has Repeating Regions, Recordset Paging and Display Record Count. The exact result that I require are generated by this method.
THE PROBLEM, when a user makes a selection the first page of 10 results is fine, but the error message above is shown at the bottom of the page, AND when the user clicks NEXT to go to the next page of results THERE ARE NO RESULTS.
This is exactly what happens depending on how many menus selected and which recordset is used:
4 menus selected from Search: runs RSsearchforsale, results correct but 3 error messages on 1st page relating to mysql_free_result($RsSearchForSale2),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct results found. NEXT page is empty of results and still shows the correct display record count as if it should be displaying the records, also has the same 3 error messages.
3 menus selected from Search: runs RsSearchForSale2, results correct but 3 error messages on 1st page relating to mysql_free_result($RSsearchforsale),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct number of results. NEXT page shows results from the DEFAULT setting of the recordset and the Display record count reflects this new set of results. Also still shows the 3 mysql_free_results for RsSearchForSale2, 3 and 4.
2 menus selected from Search: runs RsSearchForSale3, results correct but 2 error messages on 1st page relating to mysql_free_result($RSsearchforsale) & mysql_free_result (RsSearchForSale4). The display record count is correct. NEXT page does exactly the same as described in above 3 menus selected.
1 menu selected from search: runs RsSearchForSale4, results correct but 1 error meaasge on 1st page, mysql_free_result($RSsearchforsale). Display record count is correct and again when NEXT page is selected does as described in above where 2 or 3 menus selected.
If you have gotten this far without falling asleep then thank you and well done! I have pasted my code below and I know its a lot to ask but please please can you give me an idea as to where or why I have gone wrong. I felt I was so close at perfecting this search and have been working on it for weeks now. I feel sure the problem is because I have 4 recordsets on the page but I could find no other way to get the exact results I wanted from the menus.
Looking forward to any help.
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RSsearchforsale = 10;
$pageNum_RSsearchforsale = 0;
if (isset($_GET['pageNum_RSsearchforsale'])) {
$pageNum_RSsearchforsale = $_GET['pageNum_RSsearchforsale'];
$startRow_RSsearchforsale = $pageNum_RSsearchforsale * $maxRows_RSsearchforsale;
$varloc_RSsearchforsale = "mpl";
if (isset($_POST['location'])) {
$varloc_RSsearchforsale = $_POST['location'];
$vartype_RSsearchforsale = "vil";
if (isset($_POST['type'])) {
$vartype_RSsearchforsale = $_POST['type'];
$varprice_RSsearchforsale = "pr9";
if (isset($_POST['price'])) {
$varprice_RSsearchforsale = $_POST['price'];
$varbed_RSsearchforsale = "b5";
if (isset($_POST['beds'])) {
$varbed_RSsearchforsale = $_POST['beds'];
switch (true) {
case ($varloc_RSsearchforsale != 'zzz' && $vartype_RSsearchforsale != 'zzz' && $varprice_RSsearchforsale != 'zzz' && $varbed_RSsearchforsale != 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RSsearchforsale = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s AND price=%s AND type=%s AND beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc_RSsearchforsale, "text"),GetSQLValueString($varprice_RSsearchforsale, "text"),GetSQLValueString($vartype_RSsearchforsale, "text"),GetSQLValueString($varbed_RSsearchforsale, "text"));
$query_limit_RSsearchforsale = sprintf("%s LIMIT %d, %d", $query_RSsearchforsale, $startRow_RSsearchforsale, $maxRows_RSsearchforsale);
$RSsearchforsale = mysql_query($query_limit_RSsearchforsale, $propertypages) or die(mysql_error());
$row_RSsearchforsale = mysql_fetch_assoc($RSsearchforsale);
if (isset($_GET['totalRows_RSsearchforsale'])) {
$totalRows_RSsearchforsale = $_GET['totalRows_RSsearchforsale'];
} else {
$all_RSsearchforsale = mysql_query($query_RSsearchforsale);
$totalRows_RSsearchforsale = mysql_num_rows($all_RSsearchforsale);
$totalPages_RSsearchforsale = ceil($totalRows_RSsearchforsale/$maxRows_RSsearchforsale)-1;
$queryString_RSsearchforsale = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RSsearchforsale") == false &&
stristr($param, "totalRows_RSsearchforsale") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RSsearchforsale = "&" . htmlentities(implode("&", $newParams));
$queryString_RSsearchforsale = sprintf("&totalRows_RSsearchforsale=%d%s", $totalRows_RSsearchforsale, $queryString_RSsearchforsale); } ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale2 = 10;
$pageNum_RsSearchForSale2 = 0;
if (isset($_GET['pageNum_RsSearchForSale2'])) {
$pageNum_RsSearchForSale2 = $_GET['pageNum_RsSearchForSale2'];
$startRow_RsSearchForSale2 = $pageNum_RsSearchForSale2 * $maxRows_RsSearchForSale2;
$varloc2_RsSearchForSale2 = "mpl";
if (isset($_POST['location'])) {
$varloc2_RsSearchForSale2 = $_POST['location'];
$varprice2_RsSearchForSale2 = "p9";
if (isset($_POST['price'])) {
$varprice2_RsSearchForSale2 = $_POST['price'];
$vartype2_RsSearchForSale2 = "vil";
if (isset($_POST['type'])) {
$vartype2_RsSearchForSale2 = $_POST['type'];
$varbed2_RsSearchForSale2 = "b5";
if (isset($_POST['beds'])) {
$varbed2_RsSearchForSale2 = $_POST['beds'];
switch (true) {
case ($varloc2_RsSearchForSale2 == 'zzz'):
case ($varprice2_RsSearchForSale2 == 'zzz'):
case ($vartype2_RsSearchForSale2 == 'zzz'):
case ($varbed2_RsSearchForSale2 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale2 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s AND type=%s) OR (location=%s AND price=%s AND beds=%s) OR (location=%s AND type=%s AND beds=%s) OR (price=%s AND type=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"));
$query_limit_RsSearchForSale2 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale2, $startRow_RsSearchForSale2, $maxRows_RsSearchForSale2);
$RsSearchForSale2 = mysql_query($query_limit_RsSearchForSale2, $propertypages) or die(mysql_error());
$row_RsSearchForSale2 = mysql_fetch_assoc($RsSearchForSale2);
if (isset($_GET['totalRows_RsSearchForSale2'])) {
$totalRows_RsSearchForSale2 = $_GET['totalRows_RsSearchForSale2'];
} else {
$all_RsSearchForSale2 = mysql_query($query_RsSearchForSale2);
$totalRows_RsSearchForSale2 = mysql_num_rows($all_RsSearchForSale2);
$totalPages_RsSearchForSale2 = ceil($totalRows_RsSearchForSale2/$maxRows_RsSearchForSale2)-1;
$queryString_RsSearchForSale2 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RsSearchForSale2") == false &&
stristr($param, "totalRows_RsSearchForSale2") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RsSearchForSale2 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale2 = sprintf("&totalRows_RsSearchForSale2=%d%s", $totalRows_RsSearchForSale2, $queryString_RsSearchForSale2);
}?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale3 = 10;
$pageNum_RsSearchForSale3 = 0;
if (isset($_GET['pageNum_RsSearchForSale3'])) {
$pageNum_RsSearchForSale3 = $_GET['pageNum_RsSearchForSale3'];
$startRow_RsSearchForSale3 = $pageNum_RsSearchForSale3 * $maxRows_RsSearchForSale3;
$varloc3_RsSearchForSale3 = "mpl";
if (isset($_POST['location'])) {
$varloc3_RsSearchForSale3 = $_POST['location'];
$varprice3_RsSearchForSale3 = "p9";
if (isset($_POST['price'])) {
$varprice3_RsSearchForSale3 = $_POST['price'];
$vartype3_RsSearchForSale3 = "vil";
if (isset($_POST['type'])) {
$vartype3_RsSearchForSale3 = $_POST['type'];
$varbed3_RsSearchForSale3 = "b5";
if (isset($_POST['beds'])) {
$varbed3_RsSearchForSale3 = $_POST['beds'];
switch (true) {
case ($varloc3_RsSearchForSale3 == 'zzz' && $varprice3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($vartype3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz' ):
case ($varbed3_RsSearchForSale3 == 'zzz' && $varloc3_RsSearchForSale3 == 'zzz'):
case ($varloc3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale3 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s) OR (location=%s AND type=%s) OR (location=%s AND beds=%s) OR ( type=%s AND beds=%s) OR (price=%s AND type=%s) OR (price=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"));
$query_limit_RsSearchForSale3 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale3, $startRow_RsSearchForSale3, $maxRows_RsSearchForSale3);
$RsSearchForSale3 = mysql_query($query_limit_RsSearchForSale3, $propertypages) or die(mysql_error());
$row_RsSearchForSale3 = mysql_fetch_assoc($RsSearchForSale3);
if (isset($_GET['totalRows_RsSearchForSale3'])) {
$totalRows_RsSearchForSale3 = $_GET['totalRows_RsSearchForSale3'];
} else {
$all_RsSearchForSale3 = mysql_query($query_RsSearchForSale3);
$totalRows_RsSearchForSale3 = mysql_num_rows($all_RsSearchForSale3);
$totalPages_RsSearchForSale3 = ceil($totalRows_RsSearchForSale3/$maxRows_RsSearchForSale3)-1;
$queryString_RsSearchForSale3 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RsSearchForSale3") == false &&
stristr($param, "totalRows_RsSearchForSale3") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RsSearchForSale3 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale3 = sprintf("&totalRows_RsSearchForSale3=%d%s", $totalRows_RsSearchForSale3, $queryString_RsSearchForSale3);
} ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale4 = 10;
$pageNum_RsSearchForSale4 = 0;
if (isset($_GET['pageNum_RsSearchForSale4'])) {
$pageNum_RsSearchForSale4 = $_GET['pageNum_RsSearchForSale4'];
$startRow_RsSearchForSale4 = $pageNum_RsSearchForSale4 * $maxRows_RsSearchForSale4;
$varloc4_RsSearchForSale4 = "mpl";
if (isset($_POST['location'])) {
$varloc4_RsSearchForSale4 = $_POST['location'];
$vartype4_RsSearchForSale4 = "vil";
if (isset($_POST['type'])) {
$vartype4_RsSearchForSale4 = $_POST['type'];
$varprice4_RsSearchForSale4 = "p9";
if (isset($_POST['price'])) {
$varprice4_RsSearchForSale4 = $_POST['price'];
$varbed4_RsSearchForSale4 = "b5";
if (isset($_POST['beds'])) {
$varbed4_RsSearchForSale4 = $_POST['beds'];
switch (true) {
case ($varloc4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varprice4_RsSearchForSale4 =='zzz' && $varbed4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varbed4_RsSearchForSale4 =='zzz' && $vartype4_RsSearchForSale4 == 'zzz'):
case ($varbed4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale4 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s OR price=%s OR type=%s OR beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc4_RsSearchForSale4, "text"),GetSQLValueString($varprice4_RsSearchForSale4, "text"),GetSQLValueString($vartype4_RsSearchForSale4, "text"),GetSQLValueString($varbed4_RsSearchForSale4, "text"));
$query_limit_RsSearchForSale4 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale4, $startRow_RsSearchForSale4, $maxRows_RsSearchForSale4);
$RsSearchForSale4 = mysql_query($query_limit_RsSearchForSale4, $propertypages) or die(mysql_error());
$row_RsSearchForSale4 = mysql_fetch_assoc($RsSearchForSale4);
if (isset($_GET['totalRows_RsSearchForSale4'])) {
$totalRows_RsSearchForSale4 = $_GET['totalRows_RsSearchForSale4'];
} else {
$all_RsSearchForSale4 = mysql_query($query_RsSearchForSale4);
$totalRows_RsSearchForSale4 = mysql_num_rows($all_RsSearchForSale4);
$totalPages_RsSearchForSale4 = ceil($totalRows_RsSearchForSale4/$maxRows_RsSearchForSale4)-1;
$queryString_RsSearchForSale4 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RsSearchForSale4") == false &&
stristr($param, "totalRows_RsSearchForSale4") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RsSearchForSale4 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale4 = sprintf("&totalRows_RsSearchForSale4=%d%s", $totalRows_RsSearchForSale4, $queryString_RsSearchForSale4);
}?>Hi David,
Thank you for your reply and patience, we are getting closer in spite of me!
Of course i needed to change the name of the recordset, i did that the first time i did it (when i got the error), the when i re did it i forgot, in my defense i was also trying to get a full understanding of the code using the W3Schools php reference and writing by the side of the code on a piece of paper what it meant in English.
Anyway after re doing the code correctly it still displayed all the records of my database but i realised that was because i was POSTING from the search form and when i changed it to the GET method I now get results when all 4 list menus are selected from and the paging works. After reading about the POST / GET method i chose the POST option, is the GET method a better option in my circumstance?
On my site now if the user selects from 1,2 or 3 of the menus rather than selecting the relevant records it displays the NO RESULT page, I would like my users to be able to select from all of the menus or ANY combination of the menus and find exact results for their search, for example if they only select a location and a price i want it display all records that match that location and price with any number of bedrooms and any Type of property: Perhaps this is due to how my list menus are set up, for each menu the first Item label is Location (or Beds or Type or Price) and the value i have left blank which i believe means that it will use the item label as the value, the second Item label for all menus is Any and again the value has been left blank. All other item labels have values relevant to database records.
I do look forward to your reply and cannot thank you enough for following this through with me, please continue to bare with me just a little more,
best regards
Tessimon
Date: Wed, 11 Nov 2009 06:56:24 -0700
From: [email protected]
To: [email protected]
Subject: Help with message please: Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line
You're not adding the WHERE clause to the SQL query. My example code uses $query_search. You need to change that variable to match the name of your recordset, i.e. $query_RSsearchforsale.
Moreover, the WHERE clause needs to go before ORDER BY.
$query_RSsearchforsale = "SELECT trueprice,`desc`, `propid`, `bathrooms`, `location`, `type`, `price`, `beds`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid ";
// Set a flag to indicate whether the query has a WHERE clause
$where = false;
// Loop through the associatiave array of expected search values
foreach ($expected as $var => $type) {
if (isset($_GET[$var])) {
$value = trim(urldecode($_GET[$var]));
if (!empty($value)) {
// Check if the value begins with > or <
// If so, use it as the operator, and extract the value
if ($value[0] == '>' || $value[0] == '<') {
$operator = $value[0];
$value = ltrim(substr($value, 1));
} elseif (strtolower($type) != 'like') {
$operator = '=';
// Check if the WHERE clause has been added yet
if ($where) {
$query_RSsearchforsale .= ' AND ';
} else {
$query_RSsearchforsale .= ' WHERE ';
$where = true;
// Build the SQL query using the right operator and data type
$type = strtolower($type);
switch($type) {
case 'like':
$query_RSsearchforsale .= "`$var` LIKE " . GetSQLValueString('%' .
$value . '%', "text");
break;
case 'int':
case 'double':
case 'date':
$query_RSsearchforsale .= "`$var` $operator " .
GetSQLValueString($value, "$type");
break;
default:
$query_RSsearchforsale .= "`$var` = " . GetSQLValueString($value,
"$type");
$query_RSsearchforsale .= ' ORDER BY detailstable.trueprice ASC';
> -
Cannot run PAPI in Weblogic Server 10g - Error 500--Internal Server Error
I use Jdev 11g to create an ADF (PAPI) and deploy it to Weblogic 10g.
The code is copied from Jdev 10g. The PAPI works fine in when running in Jdev 10g
However, after I deploy the ADF (PAPI) created using Jdev 11g to the Weblogic server. The following error appears.
How to modify the code? Should I add the fuego lib to the weblogic domain?
I try to add the fuegopapi-client.jar to Weblogic Server. But it shows error: Unable to access the selected application. java.lang.NullPointerException
BPM is running in BPM standalone. I do not use PAPI webservice
Sincerely
Error 500--Internal Server Error
javax.faces.el.EvaluationException: fuego.directory.exception.DirectoryNotAvailableException: Unable to connect to the Directory Service. If the problem persists, contact your system administrator.
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:458)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:763)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:640)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:275)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:175)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:61)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:279)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._invokeDoFilter(TrinidadFilterImpl.java:239)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:196)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:139)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: fuego.directory.exception.DirectoryNotAvailableException: Unable to connect to the Directory Service. If the problem persists, contact your system administrator.
at fuego.directory.exception.DirectoryNotAvailableException.wrapDNAException(DirectoryNotAvailableException.java:33)
at fuego.directory.jdbc.JDBCConnectionProvider.getEntry(JDBCConnectionProvider.java:81)
at fuego.directory.jdbc.JDBCConnectionProvider.getEntry(JDBCConnectionProvider.java:34)
at fuego.directory.provider.jdbc.JDBCPersistenceManager.getConnection(JDBCPersistenceManager.java:437)
at fuego.directory.provider.jdbc.JDBCPersistenceManager.checkConnectivity(JDBCPersistenceManager.java:91)
at fuego.directory.provider.DirectorySessionImpl.connect(DirectorySessionImpl.java:242)
at fuego.directory.provider.Factory.startSession(Factory.java:405)
at fuego.directory.Directory.startAnonymousSession(Directory.java:214)
at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
at fuego.papi.ProcessService.create(ProcessService.java:335)
at hypapai2.view.backing.P1.commandButton1_action(P1.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
... 32 more
Caused by: fuego.connector.ConnectorException: External resource [fuego] of type [SQL] is not initialized.
Detail:External resource [fuego] cannot be used because it failed to initialize correctly at service startup.
That failure generated a warning in the server log.
Check the logs for the details on the failure.
at fuego.connector.ConnectorException.connectorNotInitialized(ConnectorException.java:60)
at fuego.connector.ConnectorService.getConnectorInterface(ConnectorService.java:527)
at fuego.connector.CompositeConnectorService.getDirectoryConnectorInterface(CompositeConnectorService.java:446)
at fuego.connector.CompositeConnectorService.getConnectorInterface(CompositeConnectorService.java:293)
at fuego.connector.ConnectorTransaction.registerConnectorInterfaceCoordinator(ConnectorTransaction.java:656)
at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:315)
at fuego.directory.jdbc.JDBCConnectionProvider.getEntry(JDBCConnectionProvider.java:68)
... 50 moreWhile still using PAPI, try also adding b1oracle.jar, b1base.jar and b1util.jar to your ADF project.
These jars could be found from your BPM Studio installation.
HTH -
Paper jam issue on HP OfficeJet Pro X576DW
My recently bought HP OfficeJet Pro X576DW displays and initiates a Paper Jam warning and holds printing subsequently. However, there is no "paper jammed".
Seems like one of the sensors is confused.
Is there a way to hard reset the printer, cause it is not working right now.Hope I can help you.
First, please see if you can make sure you have the latest version of firmware on your printer. If you hit the "?" mark and then touch Printer Information, you'll see the FW Version as the last thing on the screen.
The most current ends in 1336MR. If you have a number <1336, please update the FW.
The easiest way to check for FW is to have the printer connected to web services. The small icon on the upper left is for Web Services and under that menu is to check for update.
Then...
Settings/Tools/Advanced Cleaning.
Normally, this requires sending out of a cleaning pad by HP, however, try feeding a piece of card stock through tray 1. This may fix your paperjam.
Let me know.
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos! -
Hi all,
i have faced a problem in the PAP process.Actually after matching with Po and made pay in full ,i ran the PAP(payables accounting process).but it is completed with warning.when i check the log file it send the following error message.please help me out to solve the problem.
MSG MSG-00002: Check that AX is not installed before calling the accounting engine
MSG MSG-00003: AX is not installed, Calling the accounting engine
MSG MSG-00004: After the call to AP_Accounting_Engine_Pkg.Do_Accounting
MSG MSG-00005: Error occured in the accounting process
MSG MSG-00006: Error Message: ORA-20100: File o0039034.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. occurred in
&CALLING_SEQUENCE
with parameters (&PARAMETERS)
while performing the following operation:
&DEBUG_INFO
ERR REP-1419: 'beforereport': PL/SQL program aborted.
Program exited with status 3
Please help to solve the process and let me know what is the AX installation.
Thanks,
AKASHHi Akash,
I know this post is really very old but I was wondering if your problem was ever resolved. I am in a very similar situation right now.
I had a similar issue writing to the UTL_FILE_DIR with the AR Interface and was able to resolve that. However, the strange thing here is I still get the same error for Payables Accounting Process.
Any insights would be greatly appreciated.
Thanks,
Don
Maybe you are looking for
-
Multiple digital signatures from one person
I have a PDF form that has 10 pages, each page has a Signature field. I want to put this form in the WorkSpace, and route it in a workflow process, eventually route it to the user who is supposed to sign it. But I don't want him to sign 10 times (one
-
Change customer PO number on a partially billed sales order
Hi, Is it possible to change customer PO number on a partially billed sales order? We have tried this but gets the error message "Item 00010 has already been billed, quantity 0 not permitted'. This is for a direct shipment. Thanks & Regards, Keshini
-
Hello everybody, I have a problem ith my new installation of DIAdem 2012 SP1 (1f5436). While creating a new DAC plan I tried to edit the clock. I got the error messages as attatched. Is that a known issue? Regards Daniel Attachments: DACError_Part1.P
-
I can't install the .AIR file created by my Flex Builder 3 (SDK 3.5 with AIR SDK 2.5). I compiled my Air project, executed without any trouble (also in debug mode) but when trying to install on my pc (Windows XP) I get this error message from AIR ins
-
Can an unknown font will failed when generating BIP in siebel application?
Thanks! :)