No Parameter form when calling report from Forms 6i webpage
I have my Forms 6i fmx files and Reports rep files runnung off of HP Unix
within the same directory and yet when I call the report with RUN_PRODUCT,
I don't get the Parameter Form popup. I left it as default at first, and then I even tried using ADD_PARAMETER(pl_id,'PARAMFORM',TEXT_PARAMETER,'HTML') to my parameter pl_id in my RUN_PRODUCT call. Can anyone tell me why I don't get a Parameter form?
Actually if you are on the Web then you don't have much control over the format the parameter form is in, so specifying it as HTML doesn't help.
Try paramform=yes when calling teh Report and this "temporarily" should help. The problem that you run into the is that there is nothing happening when you click the parameter form submit button. The reason is that when using Run_Product you are talking to a static HTML file generated into teh Reports temp directory with no services assigned to it.
Check the Whitepaper under http://otn.oracle.com/products/reports/pdf/277282.pdf for the options that you have.
Frank
Similar Messages
-
Supressing the parameter form when calling report from form...
Hi everybody
I call a report from a form passing a parameter. After pressing
the button, the runtime parameter from appears. How do I
suppress it so that the report appears right after pressing the
button???
Thanks
SergueiHi Serguei ,
You have to add a text parameter 'PARAMFORM' with the value
'NO' to the passing parameter list. -
Getting rep-3002 when calling report from form on web
i am getting rep-3002 when i call report from a form on web environment. Report is in character mode. It is coming proper if i change it to bitmap. but my requirement is of character mode. pl. give some solution.
Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw -
To open Report in Maximize form when calling it from FORM
Dear All,
I am facing a problem related to Report.When a report is called
from the FORM, this report is not openned in MAXIMIZE form. How
will it be openned in Maximize form.
If there is any solution for it. Please write....
Regards,
Akhilesh P. VermaHave you tried to specify the following Reports runtime
parameter?
MAXIMIZE=YES -
Getting FRM-41029 when calling report from form
Hi
I have following procedure to run the report but its running fine but giving error FRM-41029 when calling the report from the form.
runrep('MATREP,'REPSER','PDF','F:\rec\RepEnt.RDF');
Repid := FIND_REPORT_OBJECT(repobj);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE, RUNTIME);
set_report_object_property(repid, REPORT_SERVER, repserv);
set_report_object_property(repid, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(repid, REPORT_DESTYPE,'file');
set_report_object_property(repid, REPORT_DESFORMAT,repfor);
set_report_object_property(repid, REPORT_FILENAME,repfile);
rgds
soumyahi
try something like this.
PROCEDURE sarah ( p_report_name varchar2, vParamValue number ) is
l_param_list paramlist;
l_rep_id report_object;
l_rep_job varchar2(100);
l_rep_status varchar(100);
BEGIN
l_param_list := Get_parameter_List('tmp');
IF NOT Id_Null(l_param_list ) THEN
Destroy_parameter_List( l_param_list );
END IF;
l_param_list := Create_parameter_List('tmp');
add_parameter(l_param_list ,'p_num',text_parameter,to_char( vParamValue ));
l_rep_id := FIND_REPORT_OBJECT( p_report_name );
if
id_null ( l_rep_id )
then
msg ( 'There is no Report ' || p_report_name || ' in form ' || name_in ( 'system.current_form' ) );
raise form_trigger_failure;
end if;
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_OTHER, 'paramform=no');
l_rep_job := RUN_REPORT_OBJECT( l_rep_id, l_param_list );
l_rep_status := REPORT_OBJECT_STATUS( l_rep_job );
WHILE l_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
l_rep_status := report_object_status( l_rep_job );
END LOOP;
WEB.SHOW_DOCUMENT('http://sarah:8889/reports/rwservlet/getjobid'||substr(l_rep_job,instr(l_rep_job,'_',-1)+1) || '?server=repserver', '_blank');
END; then u may call the procedure something like this.
when-button-pressed trigger.
begin
sarah ('REPORT6', :block.item );
end;sarah
Edited by: S@R@h on Nov 30, 2009 9:39 PM -
Urgent: Getting FRM-41211 when calling reports from forms for first time.
Hi,
We are running into the FRM-41211 error, when the users try to call a report from a form. The report is called from a form in SYNCHRONOUS mode. This is the only report that is being called. No other report is
running at that time when the users get this error. This is happening only the first time when they try to call the report from the form. After getting this error, when they click on OK, and when they try to call this
report again, the report works fine.
Any ideas?? It's urgent...
Thanks
Vamshi.
nullMaybe try to use "run_report_product"?
-
When calling report from forms, only html format report can show chinese characters
To all experts,
When I run report by calling run_report_object() in forms, only html format can show chinese characters. If I choose pdf format, garbage characters were shown instead of chinese characters. My settings on server are as follows:
NLS_LANG=TRADITIONAL CHINESE_HONG KONG.UTF8
FORMS60_REPFORMAT=PDF
Do you know why? I hope to print report in PDF format as PDF turned out to be more regular in format. Is there any additional settings required?
May experts here broaden my mind?
RichardYou have two different ways of generating Japanese PDF files from Reoprts. One is font aliasing and the other is font subsetting.
<font aliasing>
You will need to have the following entries in uiprint.txt (example).
[ PDF ]
.....JA16SJIS = "KozMinPro-Regular-Acro"
"MS UI Gothic".....JA16SJIS = "KozMinPro-Regular-Acro"
You may need to download and install Japanese Font Pack from Adobe's web site (if your Acrobat is non-Japanese version).
<font subsetting>
You will need to add C:\WINNT\Fonts (or wherever your TTF/TTC fonts are installed) to your REPORTS_PATH.
You will also need to have the following entries in uiprint.txt (example).
[ PDF:Subset ]
"Andale Duospace WT J" = "Aduoj.ttf"
"Albany WT J"="AlbanWTJ.ttf"
"MS UI Gothic" = "msgothic.ttc" -
Default file location when calling report from Forms 10G
I've tried this in the reports forum, but it applies equally to forms I guess..
Hi,
I've managed to put together a routine for running a report from a 10G Form. In 6i I specified a "relative path" to my report name as follows:-
"Run_Product(REPORTS, '..\Reports\myreportname', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL); "
In 10G I would like to just specify the report name, rather than the full file path. Can I specify a relative file path - or alternatively can I set the default report location in a configuration file?
At the moment I'm having to specify something like:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,
'c:\oracle\systemname\reports\myreportname.RDF');
I would like to just have:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,
'myreportname.RDF');
Many thanks,
Keith.Do you run your application on an application server?
If so you should use the REPORTS_PATH environment variable (in windows registry entry).
Alternatively you could use an environmentid in the reports.conf-file:
<server version="10.1.2.0.2">
<environment id="YOURID">
<envVariable name="REPORTS_PATH" value="C:\......"/>
</environment>
You call the report with the parameter &envid=YOURID in the URL. -
How to hide URL when calling Reports from Forms 10g.
Hi ,
When end user runs a report through a form then report output is displayed and following type of URL is also generated on address bar of browser: http://server:7778/reports/rwservlet/getjobid22243?server=rep_servername_appsrv
Can we hide this URL so that the user cant change the JOB_ID and get access to other previous reports.
Thanks & Regards,
NLActually, there are several options including the one already offered above. Here are a few more:
1. If you are using 10.1.2.3 and a newer JRE on the client (e.g. 1.6.0_10 or newer), you could use java script to open the report. This will not be a perfect solution because it may not work if using a non-IE browser or if java scripting is disabled. Refer to MyOracleSupport Article 265863.1 for more information.
EXAMPLE:
WEB.SHOW_DOCUMENT ('javascript:void(window.open("http://www.oracle.com","","location=no,toolbar=no,menubar=no,"));self.close()','_blank');Replace the url in the above example with the call to your report.
2. Set the age of the cache to a very short value so that it is only available long enough to be viewed by the user who created it. In other words, when setting the reports properties in your Forms code, include the Reports "others" parameter with TOLERANCE=1
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'TOLERANCE=1');This will cause the cache (on the server) to live for only one minute then be deleted. Refer to the Report Deployment Guide for more information.
3. Upgrade to Fusion Middleware (Forms/Reports) 11. In version 11, the Reports jobid can be randomized. See section 18.8.2 of the Reports 11 Deployment Guide
http://download.oracle.com/docs/cd/E14571_01/bi.1111/b32121/toc.htm -
Calling Report From Form To Many Destinations
Hi
I am calling reports from forms using SET_REPORT_OBJECT_PROPERTY and then run_report_object.
I dont know the destination until runtime of the report which is ok as I can pass this in via my procedure, but if that destination is many ie mail and file what is the best way to distribute the report?
I could call my procedure for each destination but that seems a bit unefficient since the report would be created many times, is there another way?what about adding a drop-down-list near your report-button where you can choose the destination?
when you click the report-button you simply read the value selected in the drop-down-list and send it to your reports-server too. -
Calling Report from Form Error ORA-06508
Dear all,
I want migrate from Fom6i to Oracle Developer Suite 10g (10.1).
Folder Form = C:\APLIORA\IRS\FORM
Folder Report = C:\APLIORA\IRS\REPORT
I have modified file DEFAULT.ENV
FORMS_PATH=C:\APLIORA\IRS\FORM;C:\APLIORA\IRS\REPORT
i do not have problem call a form from form.
but when i call report from form show error ORA-06508 : PL/SQL : could not find program unit being called ; -6508
my procedure is
PROCEDURE Call_Report IS
list_id ParamList;
BEGIN
list_id := Get_Parameter_List('input_params');
IF NOT Id_Null(list_id) THEN
Destroy_Parameter_List(list_id);
END IF;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id,'MAXIMIZE',TEXT_PARAMETER,'YES');
Add_Parameter(list_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');
RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS,'TESTREPORT.REP',SYNCHRONOUS,RUNTIME,FILESYSTEM,list_id,null);
END ;
Do I miss something ?
Can any one help ?
ThanksHi,
Thank you for your replay.
The problem have solved.
This my step :
1. Install Windows XP SP2 and Form 10.1.2.0.2 on new pc.
2. Install Jinit version 1.3.1.28.
3. Create report server
3. Compile form, report and pll
4. call report from from with this procedure :
PROCEDURE Call_Report (vFILENAME varchar2) IS
report_id Report_Object;
ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
repsvr varchar2(21) := 'myserv';
userid VARCHAR2(100);
pass VARCHAR2(100);
Host VARCHAR2(100);
BEGIN
userid := Get_Application_Property(USERNAME) ;
pass := Get_Application_Property(PASSWORD) ;
Host := Get_Application_Property(CONNECT_STRING) ;
report_id:= find_report_object('REPORT');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,vFILENAME||'.jsp');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,repsvr);
ReportServerJob:=run_report_object(report_id);
vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
WHILE vc_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED', null)
LOOP
vc_rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
END LOOP;
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet?report='||vFILENAME||'.jsp'||'&userid='||userid||'/'||pass||'@'||Host||'&destype=CACHE&desformat=PDF¶mform=yes','_blank');
ELSE
message ('Report failed with error message '|| vc_rep_status);
END IF;
END;
Ok, but i have another strange error. I will post new thread.
Thank you and regards
Teguh S -
Hi All,
We are migrating form from Oracle form 6i to Oracle 10g(10.1.2.0.2). I am calling reports from forms
using Web.Show_Docment(). When we run reports in report builder 10g it works fine.
But when we try to run reports from Forms 10g it throws error which is given below.
We want to run reports from UNIX. After using this url to submit report we get error REP 110 and REP 0110
URL
http://GEM:7777/reports/rwservlet?server=rep_server&report=/u01/forms/QA_Forms10g/GEMREP.rdf+DESTYPE=CACHE+DESFORMAT=HTML+p_user_id=XYZ+p_client=2
ERROR
REP-110: File '/u01/forms/QA_Forms10g/GEMREP.rdf DESTYPE=CACHE DESFORMAT=HTML p_user_id=XYZ p_client=2' not found.
REP-0110: Unable to open file '/u01/forms/QA_Forms10g/GEMREP.rdf DESTYPE=CACHE DESFORMAT=HTML p_user_id=XYZ p_client=2'.
I will really appreciate your help.
Thanks
SandyHello,
You are mixing 2 separators in the URL : & and +
Use only one separator in the URL :
Example :
http://GEM:7777/reports/rwservlet?server=rep_server+report=/u01/forms/QA_Forms10g/GEMREP.rdf+DESTYPE=CACHE+DESFORMAT=HTML+p_user_id=XYZ+p_client=2
Regards -
Suppressing parameter form when calling report (Designer 6i R4.11)
I use an action item on a Forms module to call a Reports module. This Report has one argument, and its value is provided by the Forms module. When I run the Form and press the button (= action item), the Reports parameter Form appears. How can I suppress the parameter Form since the value is provided by the Form?
Setting the display property of the argument to 'No' doesn't work.Hi Harm,
There is one parameter called 'PARAMFORM', this is text parameter saying report
whether it has to show the Parameter form or not.
If we set this to 'NO' when calling report,i t won't show the Parameter Form.
Another way is...
Open the report and delete all the items from the Parameter form layout.
Pass all the parameters from the form. Now it wont show the parameter form.
Think it will help you.
Thanks.
Siva. -
Parameter form display while calling reports from form
Dear All,
I am running reports from form using run_report_object. I do not want to see parameter form while running the report. How do I do that.
Thanks in Advance
Gaurav ShahHi, try to set paramform=NO in your parameter list
Daniel -
Calling report from FORM - error Invalid value of paramente 'P_YEAR'
Hi guys,
Could you please help me to figure out what is going wrong
with my form which run a report?
I am using Developer suite 10g.
when i run report from report application it run fine,
but when i call that report from a form it gives me error.
I have checked the datatype, checked the parameter value
that I assign from form is available in the report parameter value.
What else do i have to check in order to run this report
from the form.
Error Message from Report Queue Manager:
Invalid value for parameter 'P_YEAR'.
Your insight will be appreciated.Thank you for reply Denis,
Here is the code which run_report from form.
DECLARE
-- variables for running individual reports
report_filename VARCHAR2(40);
var_reportpath VARCHAR2(100);
report_otherparms VARCHAR2(200);
-- variables to keep track of successful reports in silent mode
rep_status VARCHAR2(40);
rep_req NUMBER := 0;
rep_count NUMBER := 0;
dummy NUMBER;
-- variables to load the report names and checkboxes into the parameter list
pl_id PARAMLIST;
plname VARCHAR2(20) := 'rpt_list';
-- variables to loop through the parameter list and run the reports
i NUMBER;
split_loc NUMBER;
param_value VARCHAR2(40);
checkbox_name VARCHAR2(40);
report_basename VARCHAR2(40);
svc_name VARCHAR2(4);
run_report BOOLEAN;
disp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'DISP',
:reports_control.year_list, :reports_control.quarter_list,
:reports_control.group_list );
hosp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'HOSPICE',
:reports_control.year_list, :reports_control.quarter_list,
:reports_control.group_list );
orth_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'O/P',
:reports_control.year_list, :reports_control.quarter_list,
:reports_control.group_list );
BEGIN
-- Are any reports selected?
IF BOXES_ARE_CHECKED(:System.Cursor_Block,'PRINT_NULL_REPORT') THEN
if not CHECKBOX_CHECKED('print_null_report') then
disp_exist := TRUE;
orth_exist := TRUE;
hosp_exist := TRUE;
end if;
-- Create Report Parameter Listing
pl_id := GET_PARAMETER_LIST(plname);
if NOT ID_NULL(pl_id) then
DESTROY_PARAMETER_LIST(pl_id);
end if;
pl_id := CREATE_PARAMETER_LIST(plname);
if ID_NULL(pl_id) then
GENERIC_ALERT('Error creating report listing');
RAISE Form_Trigger_Failure;
end if;
ADD_PARAMETER(pl_id,'id1', TEXT_PARAMETER,'cover_page_intro!INTRO');
ADD_PARAMETER(pl_id,'id2', TEXT_PARAMETER,'utilization_profile!ALLUTIL');
ADD_PARAMETER(pl_id,'id3', TEXT_PARAMETER,'utilization_summary!ALL_SUMMARY');
ADD_PARAMETER(pl_id,'id4', TEXT_PARAMETER,'hiv_profile!HIV_PROFILE');
ADD_PARAMETER(pl_id,'id5', TEXT_PARAMETER,'wound_care_profile!WOUND_CARE_PROF');
ADD_PARAMETER(pl_id,'id6', TEXT_PARAMETER,'top_10_diagnosis!TOP10DIAG');
ADD_PARAMETER(pl_id,'id7', TEXT_PARAMETER,'diagnosis_profile!DIAG_PROFILE');
ADD_PARAMETER(pl_id,'id8', TEXT_PARAMETER,'physician_profile!PHYS_PROFILE');
ADD_PARAMETER(pl_id,'id9', TEXT_PARAMETER,'physician_specialty!PHYS_SPECIALTY');
ADD_PARAMETER(pl_id,'id10',TEXT_PARAMETER,'discharge_profile!DISCHARGE_PROFILE');
ADD_PARAMETER(pl_id,'id11',TEXT_PARAMETER,'acute_care_discharge!ACUTE_DSCHRG');
ADD_PARAMETER(pl_id,'id12',TEXT_PARAMETER,'excessive_cost_patients!EXCESSIVE_COST');
ADD_PARAMETER(pl_id,'id13',TEXT_PARAMETER,'provider_profile!PROV_PROFILE');
ADD_PARAMETER(pl_id,'id14',TEXT_PARAMETER,'service_profile!SERVICE_PROFILE');
ADD_PARAMETER(pl_id,'id15',TEXT_PARAMETER,'age_gender_profile!AGE_GENDER_PROF');
ADD_PARAMETER(pl_id,'id16',TEXT_PARAMETER,'network_services!NETWORK_SERVICES');
ADD_PARAMETER(pl_id,'id17',TEXT_PARAMETER,'thh_section_header!THH_COVER');
ADD_PARAMETER(pl_id,'id18',TEXT_PARAMETER,'thh_utilization!THH_UTILIZATION');
ADD_PARAMETER(pl_id,'id19',TEXT_PARAMETER,'thh_service_profile!THH_SVC_PROF');
ADD_PARAMETER(pl_id,'id20',TEXT_PARAMETER,'hit_section_header!HIT_COVER');
ADD_PARAMETER(pl_id,'id21',TEXT_PARAMETER,'hit_utilization!HIT_UTILIZATION');
ADD_PARAMETER(pl_id,'id22',TEXT_PARAMETER,'hit_service_profile!HIT_SVC_PROF');
ADD_PARAMETER(pl_id,'id23',TEXT_PARAMETER,'hme_section_header!HME_COVER');
ADD_PARAMETER(pl_id,'id24',TEXT_PARAMETER,'hme_utilization!HME_UTILIZATION');
ADD_PARAMETER(pl_id,'id25',TEXT_PARAMETER,'hme_service_profile!HME_SVC_PROF');
ADD_PARAMETER(pl_id,'id26',TEXT_PARAMETER,'disp_section_header!DISP_COVER');
ADD_PARAMETER(pl_id,'id27',TEXT_PARAMETER,'disp_utilization!DISP_UTILIZATION');
ADD_PARAMETER(pl_id,'id28',TEXT_PARAMETER,'disp_service_profile!DISP_SVC_PROF');
ADD_PARAMETER(pl_id,'id29',TEXT_PARAMETER,'hosp_section_header!HOSP_COVER');
ADD_PARAMETER(pl_id,'id30',TEXT_PARAMETER,'hosp_utilization!HOSP_UTILIZATION');
ADD_PARAMETER(pl_id,'id31',TEXT_PARAMETER,'hosp_service_profile!HOSP_SVC_PROF');
ADD_PARAMETER(pl_id,'id32',TEXT_PARAMETER,'orth_section_header!ORTH_COVER');
ADD_PARAMETER(pl_id,'id33',TEXT_PARAMETER,'orth_utilization!ORTH_UTILIZATION');
ADD_PARAMETER(pl_id,'id34',TEXT_PARAMETER,'orth_service_profile!ORTH_SVC_PROF');
ADD_PARAMETER(pl_id,'id35',TEXT_PARAMETER,'encounter_detail!ENCOUNTER_DETAIL');
--- set up other parameters to send to generate_report
if :reports_control.output_choices = 'FILE' then
var_reportpath := :global.report_directory || :reports_control.year_list;
if :global.filename_suffix <> '_A10G' then
var_reportpath := var_reportpath || 'q' || :reports_control.quarter_list;
end if;
var_reportpath := var_reportpath || '_G' || :reports_control.group_list || '_';
else
var_reportpath := '';
end if;
report_otherparms := 'p_year='||:reports_control.year_list;
if :global.filename_suffix <> '_A10G' then
report_otherparms := report_otherparms || ' p_quarter='||:reports_control.quarter_list;
end if;
report_otherparms := report_otherparms || ' P_REPORTGROUPID='||:reports_control.group_list;
--- Check if reports are checked and submit to Reports Server
for i in 1..35 loop
GET_PARAMETER_ATTR(pl_id,'id'||i,dummy,param_value);
split_loc := instr(param_value,'!');
checkbox_name := substr(param_value,1,split_loc-1);
report_basename := substr(param_value,split_loc+1,length(param_value));
if CHECKBOX_CHECKED(checkbox_name) then
run_report := TRUE;
svc_name := substr(report_basename,1,4);
if svc_name = 'DISP' then
if not disp_exist then
run_report := FALSE;
end if;
elsif svc_name = 'ORTH' then
if not orth_exist then
run_report := FALSE;
end if;
elsif svc_name = 'HOSP' then
if not hosp_exist then
run_report := FALSE;
end if;
end if;
if run_report then
report_filename := :global.filename_prefix || report_basename || '_10G';---- :global.filename_prefix || report_basename || :global.filename_suffix;
GENERIC_ALERT(report_filename || ' ' || report_otherparms);
rep_status := GENERATE_REPORT(report_filename,:reports_control.output_choices,var_reportpath,report_otherparms);
rep_req := rep_req + 1;
if rep_status = 'FINISHED' then
rep_count := rep_count + 1;
end if;
end if;
end if;
end loop;
-- if we're in silent mode, display a completion message
if :reports_control.output_choices = 'FILE' and CHECKBOX_CHECKED('chk_silent') then
SET_ALERT_PROPERTY('REPORT_CREATED',alert_message_text,
'' || rep_count || ' of ' || rep_req || ' reports created successfully');
dummy := SHOW_ALERT('REPORT_CREATED');
end if;
ELSE
dummy := SHOW_ALERT('select_report');
END IF;
END;
Maybe you are looking for
-
I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for t
-
Buffer overrun detected in iTunes
When I synchronise photos from my PC to my iPod (5G, 30Gb) I get most of the time the next Error-message in a window named: Microsoft Visual C++ Runtine Library. The text of the message is: 'Buffer overrun detected. Program: C/Program Files\iTunes\iT
-
hey! it hasn't been a month since i got it, but i have a huge problem with my N79. when i type an SMS, it hangs after typing a few characters and all i could do is restart the phone. but once i do restart it and start typing another SMS, it hangs aga
-
I got the trial for Acrobat XI. The trial period ended. I bought the subscription. Now, every time I try to open up a pdf document, the trial window opens and the pdf does not open. This is urgent and I need to open the document up now. If I can
-
PRT Rounting prob for counter updation for Repetitive manufacturing
Hi Experts, Is it possible to do update measuring counter thr production specially in case of Repetitive manufacturing scenario .If we try the same counter thr discrete then it will update the counter . Pl guide ,is there any customization for these