No parser configuration entry for the tag ChartView

Hi All,
We have created chartview in VC 7.0 but getting below error while deploying in webdynpro runtime.
com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No parser configuration entry for the tag ChartView
Rohit

Hi Mario,
We have only three runtime in VC 7.0
1. XGraph
2. Flash
3. Webdynpro.
In your blog on wiki Flex runtime is mentioned as given below:
Webdynpro runtime is not fully supported in NW04s and some tags may not be supported as stated in the error. The reccomendation is to use the flex runtime.
Is Flex runtime and Flash runtime is same ,
I have tried to deploy the model in Flash runtime and Portal runtime error ocurs by diasply renderning JSP Component,
But when i deploy it in Webdynpro runtime , it works fine for displaying data in Table.But gives error :No parser configuration entry for the tag ChartView , when i used chart in place of table .
Thanks.

Similar Messages

WD4VC Callable Object: No parser configuration entry for the tag Invoke

I am trying to use a Visual Composer model as a callable object. I can deploy OK (as a Web Dynpro model, having checked the copmiler options "Deploy Model with PAR" and "Add Guided Procedure information").
When I try to test the Callable Object, I get the following error:
com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No parser configuration entry for the tag Invoke.
No idea how to get around this.
Any help greatly appreciated.
Kind Regards,
Tony.

Hi Mario,
We have only three runtime in VC 7.0
1. XGraph
2. Flash
3. Webdynpro.
In your blog on wiki Flex runtime is mentioned as given below:
Webdynpro runtime is not fully supported in NW04s and some tags may not be supported as stated in the error. The reccomendation is to use the flex runtime.
Is Flex runtime and Flash runtime is same ,
I have tried to deploy the model in Flash runtime and Portal runtime error ocurs by diasply renderning JSP Component,
But when i deploy it in Webdynpro runtime , it works fine for displaying data in Table.But gives error :No parser configuration entry for the tag ChartView , when i used chart in place of table .
Thanks.

Missing configuration entry for data - index relationship

IN ST04 -> configuration -> Data Class
all data classes are in yellow I'm trying to activate them and getting the following error
"Missing configuration entry for data - index relationship"
This is the result of a system copy
Thanks
Kkhaldoun

Hi All,
Just an update, I was able to get around my problems by patching the 2004s media from sp6 to sp8, uninstalling my scs, and database and re-installing from the patched media.

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Back button doesn't work due to multiple history entries for the current page. How can I fix this problem?

This problem started February 2015. I have noticed it mostly while searching ebay. When I hit the back button it did not work. I right clicked the back button and found at least 2 and sometimes up to a dozen duplicate history entries for the current page I am on, meaning I would have to click the back button a dozen times to get to the previous page. I am using Firefox 35.0.1 on a Vista computer. I have not found any fix for the problem after searching the internet for hours. I have seen similar issues with people using IE and some say the duplicate entries are caused by banner ads but still no one has provided a good answer or fix for the problem. Please help.

I will leave further answers to users of ebay. Script or adblockers may ease the problem.
* Try this add-on search [https://addons.mozilla.org/en-US/firefox/search/?q=blocker&platform=windows&appver=35.0&sort=users blocker] (Windows)

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

I want to create a mail merge for address labels into a table, but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address.

...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
Thanks!

That is a quirk of Pagesthat it applies only one record per page.
There is a way around this:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
Peter

Failed to load the configuration file for the workflow

Hi experts, yesterday I created and publish custom workflow using SPD from client pc using site administrator account but today its shows error message. I tried creating new test workflows, edit and publish to think it will push a fresh SPD settings
in working condition and it works pretty right.
But the thing I noticed after closing SPD Im not able to re-open workflows and it gives the same error message Failed to load the configuration file for the workflow. This issue only happen today since day one I used SPD and all the time
Im using the same pc.
Any ideas will be appreciated.
Cheers, R2C3 ----------------------------------- starting sharepoint :)

HI
Maybe you have permission problem or there is invalid xoml murkup.
To verify this from SharePoint Designer use the following steps.
In Office SharePoint Designer, in the folder list, select the plus sign next to Workflows library to expand it
1.Next select the plus sign of the workflow in question to expand it
2.Double-click the configuration file (Workflow_name.xoml.wfconfig.xml) to open it
3.Right-click on the page, and then select Verify well-formed XML
4.Correct any errors and save the file
5.Reopen the workflow to test
Also double check that you are using SPD with the same credentials you created workflow
Hope this will help.
Regards,
Marcin

When I updated by iphone with IOS7, my calendar entries did not follow the icloud. I am only showing pre set calendar entries for the year?

When I updated by iphone with IOS7, my calendar entries did not follow the icloud. I am only showing pre set calendar entries for the year and lost all other calendar entrie and it will not take any new entries. They show up in my outlook, but not on my iphone, which they did before I updated my software to the new i0s7

Before syncing, select each calendar on your Mac and back it up by going to File>Export>Export. If anything goes missing, you can use these to restore your calendars.
Have you tried simply force closing the calendar app on your iPhone? To do this, double-tap the home button, locate the calendar app, then swipe up on the image above the app icloud to close it and tap the home bottom. Then test your calendar again.

Failed to load configuration file for the workflow

There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I tried opening his workflow and got
the error "Failed to load configuration file for the workflow."
Any ideas?

Hi Carltonw1,
Based on your description, I recommend to verify the things below:
Clear the SharePoint Designer cache and then open the workflow.
Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
Ask the user to create the same workflow and associated with another list to see how it works.
Check the ULS log for more detailed error message.
To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Can anyone say me the Configuration material for the ECC 6.0 FI/CO

Hi everybody
Can anyone say me the Configuration material for the ECC 6.0 FI/CO
thanks n regards
venuprasad

Hi
please refer
http://www.sap-img.com/
http://www.surya-padhi.net
hope this helps
pushkaraj

When I move to the next record on a form it shows the entries for the previous record even though the record is actually null

I have a form that logs fibre analysis for asbestos analaysis. Let's say I am analysisng 2 samples. I log all the details for the first sample and hit save. Now I use the scroll button to move to the next sample. When the screen refreshes all the entries for the first sample are still showing on the screen. But these are just phantom entries, when I look at the back-end database there are of course no entries against the second sample. This does not occur with any other browser.
I have tried clearing the cache to no avail.
Any ideas?

Is Firefox filling the form via the cache or via saved form data?
If this data still gets filled when "Remember search and form history" is disabled the Firefox fills it from the cache.
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": "Remember search and form history"
In such a case a hard refresh via Ctrl + F5 might help to reset the form data.

I am trying to use an external HD and need to configure it for the MAC. Can someone explain how to configure the HD (Western Digital - My Passport SE)?

Can someone help explain how to add an external HD to the Mac? I have a Western Digital My Passport SE and need to configure if for the MAC and add it to the HD location on my Mac.

Connect the external drive to the Mac. You can do that while the Mac is on, (If the drive is one that has to be plugged into a wall outlet do that too and turn the power on.) If there is a light on the drive it should turn on.
Now double click on the hard drive icon - top left of the screen of your computer. When it opens look for the Applications folder. Double click that. Next look for a folder called Utilities. Double click. In there you will see a file called Disk Utility.app. Double click on that.
You will now see something like this, with two items on the left. The second one is your new drive.
Select it - one click. And click on Erase - one of the buttons at the top, You will see this.
You must select the Format, it's a drop down - the one shown in the image above is best. You can change the name from Untitled if you want. The name can be changed later if you prefer.
At this point look at the bottom right. There is a button there called Erase. Click on it. Then go get yourself a cup of coffee - this will take a few minutes.

Multiple entries for the same company.

Anybody out there have any idea how to enter multiple entries for the same company in Mail without having to enter all information every time for each individual. This was a very basic feature in MS Outlook. Possibly a workaround if not an option within Mail? Thanks.

Select a card with the details on it, and Edit/Copy /Edit/Paste (Command-C Command-V). Now edit one of the cards with the new individual's details. If starting from scratch, create a company card with no personal information and duplicate it as needed.
AK

Reset SMD-Configuration data for the solution

Hello!
I would like to know how to reset the configuration data for the solution in SMD wizard.
The solution has already the status "green" --> "This solution is ready for Diagnostics".
The problem is that I cannot change the settings for the server ("Setup parameters").
The instance number there (98) cannot be changed.
Further question:
how to install the introscope agent via SMD Wizard?
If I choose the solution and press "Setup Introscope Agent" I get the warning:
The landscape definition of the selected system is empty. Operation has been aborted
Furthermore I cannot see any parameters:
neigther for Server Node Details nor for Current VM Parameters. Here I get the warning:
There is no detail available for this server node. Check the Last Operation Result pane for more information.
Any helpful information wil be appreciated.
Thank you very much!
regards
Thom

Hi Thom,
To reset configuration there is possibility to remove Landscape Info using
Diagnostics Administration -> Diagnostics System -> Landscape management.
For your issue with Wily, you must have a solution correctly define. this setup will not work until you have it.
Frederic

No parser configuration entry for the tag ChartView

Similar Messages

Maybe you are looking for