NO Part1 Exists

HI
For one of Purchase order created EI using J1IEX_C - Capture Incoming Excise ,
While posting the same in J1EX_P getting below Information message
"No Part1 Exists for availing credit in excise invoice BE#889699 2007"
Can some one suggest me what's this message and what needs to be done to avoid this?
Reg
Shan1242

Hi,
As I said already, the Part1 no will be generated based on the setting in IMG.
Go to LogGen -> Tax on Goods movements -> India -> Basic Setting -> Excise Group setting
In EG setting, u will find MIGO related setting. Here you make the Party Entry and save the settings. Also please ensure that the Part1 serial no has already been maintained.
Now you try to taking GR through MIGO, after saving the document the system will give the Part1 no and Internal No
Regards
Manivannan R

Similar Messages

Problem in posting excise invoice(part2)

hello gurus,
i am facing one serious problem. i am using 46c version.
in case of import procurement . i am not able to post excise invoice .the step i am following are as follows
1.after doing MIRO i captured excise for CVD through j1iex with refernce to purchase order , pop up menu appears , i put MIRO number and years. system generated internal excise invoice no.
2.GR process done with refernce to PO.
3.than i create part1 through j1i5.
than after i am trying to post part2 by tcode j1iex again but it shows message that no part1 exist .
how i can solve this problem, can any one tell me whole cycle for import purchase in sap 46c.
one more question while making MIGO with refernce to PO one pop up screen should appear for entring MIRO no for reference (as it appears in SAP47c and above), but it is not coming in sap46c. can any one help me whether it is possible in sap46c or not.
regards
ashwani tripathi

Hi,
Generally, for Import procedure folowed is.
- PO created without GR/IR Unchecked and for Customs duties conditons are correctd with Custom vendor number
- MIRO done for the Customs Vendor ( after the receipt of Goods )
- MIGO done for the Goods ( when Tcode is excuted it will display the Doc number Generated in the MIRO run, or you have to input the correct number )
- J1IEX done for the part2 posting
Regards

Excise and Invoice verification

Hi
During Invoice verification the system is generating error message: PART2 entry was not posted.
In J1iex it shows the status of IN Process.
During Posting in J1iex it issue message NO PART1 exist for availling credit.
How to resolve this so that it will book for invoice verification....i
Regards,
SAGAR

Hi
Run tcode J1I5 and update Part1 register.Use classification ROP.Once this is done then Post the Excise invoice in J1IEX and then perform MIRO
Regards
Sandeep

Transaction MIGO and J1IEX_P

Hi All Experts,
I am using J1IEX_P for posting excise data and for creating part2 of it.
I have developed a y transaction to post GR w.r.t. PO without excise data and I am trying to post excise data using BDC for transaction J1IEX_P
It works fine, when I goes to BDC for J1IEX_P
I gave Vendor excise no as a parameter.
On first enter it gives error written as below.
"No part1 exists for availing credit in excise invoice ."
please help me in this regards.
Thanks in Advance,
Dhanu.

Dear Dhananjay,
For excise enteries, there is Part1 as well as part2 posting.
Part1 posting is Quantity posting. (j1ia)
Part2 posting is value posting. (j1ib)
Part2 posting is done wrt part1 posting
Regards
Vikas Madaan

Part1 is not generating for Vendor Subsequent delivey

Hi ASAP
I hope you must be doing great; steps are as follow which Iu2019m following for vendor return and subsequent delivery for Raw / Capital goods.
1. PO -> MIGO (101) -> Excise capture & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevant register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capture & Posting using J1IS&V.
For Excise, Part1 is getting created using J1IS, J1IV is creating Part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
Any way, After GR of 123, I have Capture Excise Invoice after inputting all relevant data, but while Posting, System is generating message that Part1 is does not exist for vendor excise invoice.
Now I think requirement is visible for your understanding to suggest me some valuable idea.
If possible can plz drop a test mail to hksiva.manoj at gmail dot com for further clarification?
Thanks & Regards
Manoj K Singh

Hi Rajaram,
Thanks for your ealiest reply, yes i have done the config. which you suggested,
Even after this " Specify which mvt type involves excise invoices", assignment system is not generating Excise screen for Movt. 123 w. r. t. 122.
Manoj K Singh

Part1 is not Generating for Vendor Subsequent Delivery

Hi ASAP
I hope you must be doing great; steps are as follow which Iu2019m following for vendor return and subsequent delivery for Raw / Capital goods.
1. PO -> MIGO (101) -> Excise capture & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevant register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capture & Posting using J1IS&V.
For Excise, Part1 is getting created using J1IS, J1IV is creating Part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
Any way, After GR of 123, I have Capture Excise Invoice after inputting all relevant data, but while Posting, System is generating message that Part1 is does not exist for vendor excise invoice.
Now I think requirement is visible for your understanding to suggest me some valuable idea.
If possible can plz drop a test mail to hksiva.manoj at gmail dot com for further clarification?
Thanks & Regards
Manoj K Singh

Hi Rajaram,
Thanks for your ealiest reply, yes i have done the config. which you suggested,
Even after this " Specify which mvt type involves excise invoices", assignment system is not generating Excise screen for Movt. 123 w. r. t. 122.
Manoj K Singh

Can Co-Exist two CHARM setups for managing an Unique Landscape?

Hi Guys
We are actually migrating and Upgrading an existing Solution Manager 7.01 to 7.1
Since we are performing tests on this Sandbox system, we would like to replicate CHARM configuration and execute full integration tests against managed systems.
There is the actual Productive Solution Manager (SSM), which manages an BW Landscape and a ERP Landscape
If we configure CHARM this Sandbox Solution Manager upgraded to 7.1 (SMT), to manage the same actual BW and ERP Landscape, the configuration would be affected on the original Systems?
In other words, Can we have two CHARM Clients (Test and Productive) to manage BW and ERP Landscape without affecting each other configuration
On the Sandbox CHARM, we only want to test configuration and perform a Change Request Cycle only for testing.
Any comments or suggestions would be much appreciated.
Regards!

Hi Martin,
Your development solman might not be connected to erp dev qa and prod so you can just create 3 clients within solman to do this or
take a erp sandbox and create 3 clients within it having roles of Dev Qa and Prd like in below blogs
How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part1)
How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part2)
hope above helps
Thanks
Prakhar

[Solved]Boot from USB HDD - Root device doesn't exist. Major/minor

My problem is that the kernel seems (or starts) to load, but then I get an error:
Root device 'UUID=1234 . . .' doesn't exist.
Attempting to create it.
ERROR: Unable to determine major/minor number of root device "UUID=1234 . . .'
You are being dropped into recovery shell
I found a few links on the web and in the forums, but nothing that really solved it for me. The solved ones usually downgraded the kernel. I haven't done that yet. I thought I'd try here first.
I have a 320GB USB HDD that I have been using to experiment with different linux distros. I have a few working successfully (OpenSUSE,Mint,Ubuntu,Debian,Fedora,etc). I'm very new at this but have been reading a lot and putting a lot of time into it. I have legacy grub loaded on the MBR and use the menu.lst on my openSUSE partition to boot everything. Because the partitions for some of the distros are so far into the disk I needed to create directories on openSUSE's /boot directory to contain the kernel and initrramfs files (like /boot/fedora). This seems to work for the other distros. I did the same thing for Arch.
So when I installed Arch I haven't used the bootloader section of the installation.
I'm using the 2011.08.09-netinstall-i686.iso Live CD.
I tried a few things including:
1. changing the HOOKS in /etc/mkinitcpio.conf
a. adding usb to the "HOOKS"
b. removing and adding autodetect
c. adding and removing "sata_sil" (although I'm not even sure if my device uses it)
2. changing the kernel line:
a. from using "UUID=" to (hd0,1) to sdb1.
b. added rootdelay=8
3. repartition all of my arch partitions using cfdisk from my Live CD and reinstall. I used gparted on OpenSUSE to do it the first time.
This may be connected. When I fdisk -l from the Arch Live CD I get extra data and an error for each of my arch partitions (and only my arch partitions):
Disk does't contain a valid partition table
When I fdisk -l from OpenSUSE I don't get the data paragraphs or errors about the arch partitions?
Here is my /etc/fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
UUID=0e7556ef-b832-43e9-a8ba-c68dd2cd6143 /var reiserfs defaults 0 1
UUID=510bb601-13c1-46ec-87c0-a800dd2efb8b / ext4 defaults 0 1
UUID=cd78ab04-742d-4ba5-9727-90727de2dd14 swap swap defaults 0 0
UUID=dc5685e3-35b0-46d4-b259-61f2530ff36a /home ext3 defaults 0 1
And my HOOKS:
HOOKS="base udev autodetect pata scsi sata usb filesystems usbinput"
And my menu.lst:
1
default 0
timeout 32
gfxmenu (hd0,1)/boot/message
###openSUSE on sda2 - legacy grub
title openSUSE 11.4 - Celadon - gnome
root (hd0,1)
kernel /boot/vmlinuz-2.6.37.6-0.7-default root=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part2 resume=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part1 splash=silent quiet showopts nomodeset vga=0x314
initrd /boot/initrd-2.6.37.6-0.7-default
###openSUSE failsafe on sda2 - legacy grub
title Failsafe -- openSUSE 11.4 - 2.6.37.6-0.7
root (hd0,1)
kernel /boot/vmlinuz-2.6.37.6-0.7-default root=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part2 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x314
initrd /boot/initrd-2.6.37.6-0.7-default
###floppy###
#title Floppy
# rootnoverify (fd0)
# chainloader +1
###Fedora on sda5 - legacy grub
title Fedora 15-Lovelock gnome
root (hd0,4)
configfile /boot/grub/grub.conf
###Mint on sda6 - grub2
title Mint 9 Lucid Lynx gnome
root (hd0,5)
kernel /boot/grub/core.img
savedefault
boot
###PCLinux on sda7 - legacy grub
title PCLinuxOS 2011.6 KDE
root (hd0,6)
chainloader +1
###Ubuntu on sda8 - grub2
title Ubuntu 10.04.2 gnome
root (hd0,7)
kernel /boot/grub/core.img
savedefault
boot
####arch on sda10 - legacy grub
title ARCH
root (hd0,1)
#root UUID=XXXXXXXXXX44c5a3cd-dcb5-4cf1-933e-7a8ebac2a992
kernel /boot/arch/vmlinuz-linux root=UUID=510bb601-13c1-46ec-87c0-a800dd2efb8b ro rootdelay=8
#kernel /boot/arch/vmlinuz-linux root=(hd0,9)
#kernel /boot/arch/vmlinuz-linux root=/dev/sda10
initrd /boot/arch/initramfs-linux.img
savedefault
boot
###Debian on sda11 - grub2
title Debian 6.0.2.1 squeeze gnome
root (hd0,1)
kernel /boot/debian/vmlinuz-2.6.32-5-686 root=UUID=2b6052e2-ecdf-4796-81c8-b9e9142ca159 ro
initrd /boot/debian/initrd.img-2.6.32-5-686
savedefault
boot
###Mandriva on sda12 - legacy grub
title Mandriva 2011 KDE
root (hd0,1)
kernel /boot/mandriva/vmlinuz-2.6.38.7-desktop-1mnb2 root=UUID=5033f7fb-cac7-4db5-920c-c8bd2b51365f ro
initrd /boot/mandriva/initramfs-2.6.38.7-desktop-1mnb2.img
savedefault
boot
Here is my fdisk -l from OpenSUSE. I'm not quite swift enough to mount the hard drive and use the script utility from the Live CD yet, at least not tonight:
Disk /dev/sda: 320.1 GB, 320072932864 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142447 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c3bbb
Device Boot Start End Blocks Id System
/dev/sda1 2048 4208639 2103296 82 Linux swap / Solaris
/dev/sda2 4208640 46153727 20972544 83 Linux
/dev/sda3 46153728 87113727 20480000 83 Linux
/dev/sda4 87115770 614031755 263457993 5 Extended
/dev/sda5 87115776 128075775 20480000 83 Linux
/dev/sda6 128077824 169037823 20480000 83 Linux
/dev/sda7 169039872 209999871 20480000 83 Linux
/dev/sda8 210001920 250961919 20480000 83 Linux
/dev/sda9 250963968 291923967 20480000 83 Linux
/dev/sda10 291924031 332886015 20480992+ 83 Linux
/dev/sda11 332888064 373848063 20480000 83 Linux
/dev/sda12 373848678 414992383 20571853 83 Linux
/dev/sda13 414994432 435474431 10240000 83 Linux
/dev/sda14 435474495 455956829 10241167+ 83 Linux
/dev/sda15 455958528 578881535 61461504 b W95 FAT32
/dev/sda16 578881599 614031755 17575078+ 83 Linux
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x95aa95aa
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 294889139 147444538+ 7 HPFS/NTFS/exFAT
/dev/sdb2 294889140 312576704 8843782+ 7 HPFS/NTFS/exFAT
That's it for now.
Last edited by newbie55 (2011-09-23 22:19:58)

I'm IN! Thanks everyone for your suggestions!
The arch system didn't like the identifier I was using for the root partition. By looking at the /dev/disk/by-id while the arch system was running, I could see what the system wanted me to call the partition. So after the system error'd-out and I was in the recovery shell at the [ramfs /] prompt:
# ls -lF /dev/disk/by-id > by-id.txt
# vi by-id.txt
I could have used any of the identifiers listed in the by-id (there were 3), by-uuid(1), by-label(1) or by path(1). I tried them all. I had to write these down by hand because it is a ram filesystem.
The article that finally got me there is:
https://wiki.archlinux.org/index.php/Pe … ice_naming
Anyway my openSUSE grub menu.lst ended up like this:
####arch on sda10 - legacy grub
title ARCH
root (hd0,1)
kernel /boot/arch/vmlinuz-linux root=/dev/disk/by-uuid/510bb601-13c1-46ec-87c0-a800dd2efb8b ro rootdelay=8 rootfstype=ext4
initrd /boot/arch/initramfs-linux.img
savedefault
boot
It's easy once you: 1. beat your head against the wall
2. read further
3. repeat 1 and 2
Back to the "Beginner's Guide",4 Post-Installation. Yikes!

Part1 error during GR

Hi Gurus,
While creating the MIGO for subsequent supply Movt. 123 with reference to vendor return122, system is not able to create Excise part 1 entry.
Becouse of this reason i am not able to post vendor excise invoice.
Gurus can you plz suggest some idea or solution so that system should generate part 1 entry during MIGO for subsequent supply Movt. 123 with reference to vendor return122.
Full point will be awarded.
Regards
Manoj K Singh

Hi Kapil ,
I hope you must be doing greate, steps are as follow which i'm following for vendor return and subsequent delivery for capital goods.
1. PO -> MIGO (101) -> Excise capute & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevent register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capute & Posting using J1IS&V.
For excise, part1is getting created using J1IS, J1IV is creating part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
any way ,After GR of 123, I have Capture Excise Invoice after inputting all relevent data, but while Posting, System is generating message that Part 2 is does not exist for vendor excise invoice.
Now i thinks requrement is visible for your understanding to suggest me some valuable idea.
if possible can plz drop a test mail to hksiva.manoj at gmail dot com for further consultation.
Thanks & Regards
Manoj K Singh

No part 1 exists for availing credit in excise invoice -----------_J1IEX

Dear Guru's,
I have done GR with 101 mvmt type in MB01( creating PO in bk ground), it has posted & stock has been updated as well.
When i am capturing the excise in J1IEX, part 1 & part 2 entries were not updating.
But i got the below message after saving.
Excise Invoice -
has been successfully captured.
When i am trying to post the same doc in J1IEX, at that time below error is coming
No part 1 exists for availing credit in excise invoice -
Pls help me out to solve the problem.
Regds,
Channa

Hi Channa,
How you resolve this issue please let me know i am facing same issue from 2 day .
While capturing the excise in J1IEX I am getting the msg as Excise Invoice 0010000125/ 2011 ( 18 ) has been captured. But Part1 & Part2 entries were nt happening, its showing N.A.If i checked in part1 table there is intry found but if i checked in J1I7 there is one intry found .If i displayed above document in J1IEX there is no posting date ,there is blank field.
Please let me know why its happening.
Can u tell me what might be the problem ?
Regards,
Virendra Maurya
Moderator message: Please do not hijack other peoples threads for asking own questions. Open your own thread, give a good subject and good information and hope that you get an answer
Edited by: Jürgen L. on Dec 27, 2011 5:55 PM

If image file not exist in image path crystal report not open and give me exception error problem

Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as below

First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

How can a family with multiple existing accounts use Home Sharing?

I'd like to use the new Home Sharing feature, but it appears to be restricted to families in which all of the family members share a single user account.
We already have separate accounts for each family member. Is there some way for us to use Home Sharing without abandoning most of our existing accounts, along with all of the purchases made by those accounts? I don't think anyone in this situation would be willing to do that.

Eh. I am not too sure since I have not messed with it much but I do have a great deal of experience with multiple accounts. Each computer can be authorized for multiple accounts. As can iPods. iPods can sync songs/videos/apps from multiple accounts as long as the computer is authorized with them. What I have set up here, is I buy my stuff I want, my parents buy what they want and so do my brothers. When my bro gets something I want I just move it to my computer. That way all our accounts are separate, but if there is something I want I can get it. Also, since the music no longer has DRM, it won't matter. It will play on any computer. What you should see is if you can just do the shared library with multiple accounts. Then if you don't have videos or such, you can get apps or music. Hope this helps!

Error message: "playlists selected for updating no longer exist"

I tried to update my ipod nano and I guess I had deleted a playlist, but since then, I have not been able to update. Every time I try, I get the following message:
"Cannot be updated because all of the playlists selected for updating no longer exist."
I haven't been able to highlight which playlists are selected to begin with.
I read through the manual and thought that maybe rebooting the whole system might work. So I deleted Itunes from my computer and re-installed.
Then I tried re-setting my ipod. So now I have nothing on my ipod.
I also deleted everything from my library, thinking it might help to start from scratch. Nothing has worked.
How do I "select" and "unselect" playlists so I can get up and running again?

Here you go.
http://discussions.apple.com/thread.jspa?messageID=607312&#607312

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
   Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
   be adjusted to this change. To adjust the dependent objects, you must perform the following actions
   the next time you activate this object.
                    - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
                      - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                        TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
     that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
     ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
      - Now, How do I activate something which does not exist in the first place ?
    Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

NO Part1 Exists

Similar Messages

Maybe you are looking for