No patches for SLES 11 SP3?

I'm working on deploying ZCM 11.2 for all of my linux patching needs, but have run into a stopper. I download my subscriptions and the ZCM server sees that there are patched avalable/needed for SLES 11 SP3, but when I try to cache them, the downloads fail. This is consistent for all SLES 11 SP3 patches - SP2 patches download without any problems. The error I see in the loader-messages.log for an example download (Novell SUSE 2014:8820 autofs recommended update for SLE 11 SP3 x86_64) is as follows...
DEBUG] [2/3/14 4:47:28 PM] [] [Loader.MandatoryBaselineManager] [26] [] [Exception during Caching:] [] []
[DEBUG] [2/3/14 4:47:28 PM] [] [Loader.MandatoryBaselineManager] [26] [] [com.lumension.scr.exception.SCRException: Couldnt find rpm files for advisory SUSE-2014:8820
at com.lumension.scr.pojo.SCPackage.getRPMPackage(SCP ackage.java:314)
at com.lumension.scr.pojo.SCPackage.getAllPackageFile s(SCPackage.java:418)
at com.lumension.scr.pojo.SCPackage.download(SCPackag e.java:363)
at com.patchlink.sapphire.download.SubscriptionDownlo adActionHandler.processAction(SubscriptionDownload ActionHandler.java:464)
at com.novell.zenworks.loader.modules.queue.runner.Qu eueThreadWorker.processAction(QueueThreadWorker.ja va:212)
at com.novell.zenworks.loader.modules.queue.runner.Qu eueThreadWorker.run(QueueThreadWorker.java:143)
at java.util.concurrent.ThreadPoolExecutor$Worker.run Task(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
[DEBUG] [2/3/14 4:47:28 PM] [] [Loader.MandatoryBaselineManager] [26] [] [Failed to create patch cache bundle: Novell SUSE 2014:8820 autofs recommended update for SLE 11 SP3 x86_64] [] []
I can see this particular patch listed on Lumension's site at http://leic.lumension.com/patches/20...013849%7D.html and on Novell's site at http://download.novell.com/Download?...d=6FEGSAdkSPw~
Why can't my Zen server successfully download this or any other SLES 11 SP3 update?
Thanks!

Hi
I'm getting a similar thing. Windows patches/baselines are working OK. I can update the SLES servers through YAST/online update, but would like to get the patch management for Linux working as well.
The DAU on the Linux servers is reporting that patches are required and all SLES 11SP3 patches are listed in the "Patch management/patches" screen. But when I go to update the cache or assign a patch to my baseline, a message pops up in the Patch Management/Status Tab as Queued, and then Failed with the error Failed to download one or more packages. I have about 30 Gig free on the server. I have a subscription set up from NCC for SLES11SP3 which returns "Success".
In the loader-messages.log I have the following snippet.
[DEBUG] [6/20/14 10:08:57 AM] [] [PatchManagement] [11022] [] [Downloading file from http://novell.cdn.lumension.com/nove...B22C85842.plp] [] []
[DEBUG] [6/20/14 10:08:57 AM] [] [PatchManagement] [11022] [] [File exists] [] []
[DEBUG] [6/20/14 10:08:57 AM] [] [PatchManagement] [11022] [] [download success true] [] []
[INFO] [6/20/14 10:08:57 AM] [] [PatchManagement] [11022] [vendor SUSE release SLES version 11Architecture x86_64] [vendor SUSE release SLES version 11Architecture x86_64] [] []
[DEBUG] [6/20/14 10:08:57 AM] [] [PatchManagement] [11022] [] [Local File is /opt/novell/zenworks/zpm/repository/SUSE/null/python-pywbem-0.7-6.22.1.x86_64.rpm] [] []
[DEBUG] [6/20/14 10:08:57 AM] [] [PatchManagement] [11022] [] [Checksum is null] [] []
[DEBUG] [6/20/14 10:08:57 AM] [] [PatchManagement] [11022] [] [Checksum type is rpm] [] []
[DEBUG] [6/20/14 10:08:57 AM] [] [Loader.MandatoryBaselineManager] [11022] [] [Exception during Caching:] [] []
[DEBUG] [6/20/14 10:08:57 AM] [] [Loader.MandatoryBaselineManager] [11022] [] [java.lang.NullPointerException
at com.lumension.scr.util.Utils.fromHexString(Utils.j ava:934)
at com.lumension.scr.nca.repl.PrimaryRPMFile.<init>(P rimaryRPMFile.java:75)
at com.lumension.scr.pojo.SCPackage.getAllPackageFile s(SCPackage.java:598)
at com.lumension.scr.pojo.SCPackage.download(SCPackag e.java:363)
at com.patchlink.sapphire.download.SubscriptionDownlo adActionHandler.processAction(SubscriptionDownload ActionHandler.java:464)
at com.novell.zenworks.loader.modules.queue.runner.Qu eueThreadWorker.processAction(QueueThreadWorker.ja va:212)
at com.novell.zenworks.loader.modules.queue.runner.Qu eueThreadWorker.run(QueueThreadWorker.java:143)
at java.util.concurrent.ThreadPoolExecutor$Worker.run Task(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
[DEBUG] [6/20/14 10:08:57 AM] [] [Loader.MandatoryBaselineManager] [11022] [] [Failed to create patch cache bundle: Novell SUSE 2014:9343 python-pywbem recommended update for SLE 11 SP3 x86_64] [] []
The "Exception during Caching" indicates that maybe I've not set something at my end.
Any thoughts appreciated.
Cheers

Similar Messages

OES11 SP2 -- Use SLES SP3?

The question is simple.
Part1
Should I also be upgrading to SLES SP3 when I do the upgrade to OES 11 SP2?
Due to version confusion -- the answers given in this forum are not always Crystal Clear.
Part 2:
Is this spelled out somewhere in the (thousands of pages) of the documentation that I missed somewhere? (Perhaps I am having a "senior moment" and just can't see the words in one of the manuals.
Thanks for any help.
Cheers!

On 09/01/2014 11:16 AM, davewr50 wrote:
>
> The question is simple.
>
> _PART1_[/B]
> SHOULD I ALSO BE UPGRADING TO SLES SP3 WHEN I DO THE UPGRADE TO OES 11
> SP2?
>
> DUE TO VERSION CONFUSION -- THE ANSWERS GIVEN IN THIS FORUM ARE NOT
> ALWAYS CRYSTAL CLEAR.
Yes; OES versions are, by default (with very, very few exceptions) linked
directly to SLES versions, with OES versions being one SP behind SLES SPs.
Thus, OES 11 SP2 is linked to SLES 11 SP3.
> [B]_PART_2:_
> Is this spelled out somewhere in the (thousands of pages) of the
> documentation that I missed somewhere? (Perhaps I am having a "senior
> moment" and just can't see the words in one of the manuals.
https://www.novell.com/documentation...a/btmu44d.html
Top of the page under Meeting All Server Software and Hardware Requirements:
Code:
Server Software
As part of the OES 11 SP2 installation, you install SUSE Linux Enterprise
Server 11 SP3.
IMPORTANT:OES 11 SP2 services were developed and tested on a default and
fully-patched SLES 11 SP3 server base.
As you install OES 11 SP2, do not change any of the SLES 11 SP3 Base
Technologies package selections, such as Java support. Doing so can cause
various problems, such as the installation failing or one or more OES 11
SP2 services not working properly.
If you are installing on an existing SLES 11 SP3 server, be sure to verify
that all of the default SLES 11 SP3 components are installed before
attempting to install OES 11 SP2 services.
I would not define missing this as a senior moment; powerful products come
with lots of docs, and knowing exactly where to find one specific piece of
information is not always clear.
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Starter Pack now includes 60 day Eval product key for SLES

Q1: What is the Starter Pack?
The Novell Open Workgroup Suite - Small Business Edition Starter Pack is a product that provides a Customer with a no-cost, one-time, 5-user license for Novell Open Workgroup Suite - Small Business Edition. This is not a trial or evaluation license but a full product license.
Q2: Am I required to purchase Maintenance with the Starter Pack?
No!
Q3: Are all the NOWS SBE components and add-on products included with the Starter Pack?
No. Maintenance is required to obtain some of the component products and product updates. At one point there was a list of the additional products that were available to customers who purchased maintenance but I am unable to locate it, perhaps because NOWS SBE licenses can now only be purchased with maintenance.
Q4: What is the issue regarding product keys for SLES?
When NOWS SBE is installed, customers are required to enter product keys for each of these three products: NOWS SBE, OES, and SLES.
Product keys are normally included with most products when the product is delivered however SLES product keys work a little bit differently. A SLES product key allows access to patches and updates and is provided when a customer purchases maintenance. Novell will provide a temporary 60-day "Eval" product key when a customer downloads an Eval copy of SLES. This subtle distinction goes unnoticed when NOWS SBE is delivered because NOWS SBE licenses can only be purchased with maintenance.
Novell now delivers the Starter Pack with a 60-day Eval product key for SLES to allow customers to complete the NOWS SBE installation without having to purchase maintenance.
Q5: What do I do if I need licenses for more than 5 users?
Simply purchase as many additional groups of 5-user NOWS SBE licenses as you need. For example, if you had ten users, you could purchase the Starter Pack plus one additional 5-user NOWS SBE license.
Note: Since NOWS SBE 5-user licenses can only be purchased with maintenance and customers with maintenance must purchase maintenance for all licenses, you would be required (in this case) to purchase maintenance for the 5-user license obtained with the Starter Pack.
Q6: How do I get the Starter Pack? <customer>
Your Novell Reseller can provide additional information and order it for you. Some conditions apply.
Q7: How do I get the Starter Pack? <reseller>
The Starter Pack is ordered through your distributor and delivered electronically to your customer. You may find the following Novell product codes helpful:
Novell Open Workgroup Suite - Small Business Edition 2.5 Starter Pack 5-User License (873-010136)
Novell Open Workgroup Suite - Small Business Edition 2.5 5-User License + 1-Year Priority Maintenance (879-000923)
Novell Open Workgroup Suite - Small Business Edition 2.5 5-User License + 1-Year Standard Maintenance (879-000924)
Upgrade Novell Open Workgroup Suite - Small Business Edition 2.5 5-User License + 1-Year Priority Maintenance (879-000925)
Upgrade Novell Open Workgroup Suite - Small Business Edition 2.5 5-User License + 1-Year Standard Maintenance (879-000926)
Novell Open Workgroup Suite - Small Business Edition 5-User 1-Year Priority Maintenance (877-001511)
Novell Open Workgroup Suite - Small Business Edition 5-User 1-Year Standard Maintenance (877-001575)
Disclaimer:
I am not a Novell employee. While I believe this information to be correct as of the time of its posting, I encourage you to verify its accuracy for yourself before relying on it.

KBOYLE,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Patch for Jahia 3.1 to work WebLogic Server 6.1 with Struts is available!!!

I have a major patch for Jahia 3.1 server to work on WebLogic Server
          6.1 (so far I've tested it against WebLogic Server 6.1 sp3 & sp4, I'm
          sure it will work on sp1 and sp2 as well though). We do have complete
          support for strtus. If interested email me at [email protected]
          Regards


What is Jahia BTW?
          "Vitaly Veksler" <[email protected]> wrote in message
          news:[email protected]..
          > I have a major patch for Jahia 3.1 server to work on WebLogic Server
          > 6.1 (so far I've tested it against WebLogic Server 6.1 sp3 & sp4, I'm
          > sure it will work on sp1 and sp2 as well though). We do have complete
          > support for strtus. If interested email me at [email protected]
          >
          > Regards

Oracle Application Server for SLES Linux error when install

I try install Oracle Application Server Infrastructure (as_linux_x86_portal_wireless_101202) on SLES:
1. I install orarun package.
2. Install patch 3167528 - remove entries from the "/etc/services"
error when install - the OPMN process manager failed to start.
I read opmn/logs: can't load shared library libdb.so.2...
I check /usr/bin/libdb.so and found libdb-4.3.so
I create simbolik link libdb.so.2 to libdb-4.3.so and retry install oracle Application Server Infrastructure, but have this error again.
I try install Oracle Application Server Infrastructure on several linux distribs, but have this error again adn again..
how I can fix this error? help mee pls..

I think that you need to download a patch for that error, this patch is just a library that you need create a link to it.
Follow this Metalink Note 790943.1
Greetings

When to apply SP 3 Patches for BO XI R3.1 Enterprise

Dear Experts,
I have installed BO XI R3.1 Enterprise Version.Xcelsius 2008 also.
I want to work on them now.
Later can i apply SP 3 patches for them or i need to apply at initial stages only.
Thanks

Hi,
As indicated in the Update Installation and Deployment Guide:
https://websmp207.sap-ag.de/~sapidb/011000358700000560412010E/xi31_sp3_update_inst_en.pdf
You have two options for installing SAP BusinessObjects Enterrpise XI 3.1
SP3 and its associated programs.
u2022 An update install that can upgrade your current SAP BusinessObjects
Enterprise XI 3.1 or SAP BusinessObjects Enterprise XI 3.1 SP2
deployment to the SP3 level.
u2022 A refresh install will perform a full installation of SAP BusinessObjects
Enterprise XI 3.1 SP3.
You can find more information in this KB:
https://service.sap.com/sap/support/notes/1561265
Regards,
Julian

AAC/MPEG-4 support patch for abcde

I got bored to day and made up this patch for abcde that adds support for AAC using the M4A extension.
It uses FAAC as the encoder and also patches abcde to version 2.2.3
I have not tested it yet so bear with me...i'll post my test results later.
You'll have to manually add the "M4AENCOPTS=" variable to the config
usage is: abcde -o m4a
UPDATED: fixed a plethora of typos
another side note is the fact FAAC must be compiled with mpeg-4 support, the Archlinux package for FAAC isn't, so therefore this could be a problem unless you compile FAAC yourself. I submitted a feature request to get mp4 support added.
the following is the 2.2.0 to 2.2.3 update+AAC patch. I will submit a AAC patch for the newest release to the developers of abcde later on.
--- abcde-old-2.2.0 2005-03-08 12:42:14.000000000 -0500
+++ abcde2 2005-03-08 12:11:07.000000000 -0500
@@ -11,7 +11,7 @@
# Copyright for this work is to expire January 1, 2010, after which it
# shall be public domain.
-VERSION="2.2.0"
+VERSION="2.2.3"
usage ()
@@ -21,7 +21,7 @@
echo "-1 Encode the whole CD in a single file"
echo "-a <action1[,action2]...>"
echo " Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
-echo "-A Experimental actions (retag, transcode)"
+#echo "-A Experimental actions (retag, transcode)"
echo "-b Batch mode: enable album normalization and nogap encoding"
echo "-c <file>"
echo " Specify a configuration file (overrides system and user config files)"
@@ -366,6 +366,9 @@
mpc)
run_command tagtrack-$1 true
+ m4a)
+ run_command tagtrack-$1 true
+ ;;
esac
done
@@ -489,6 +492,10 @@
## FIXME ## to the encoder ends up empty.
run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
+ m4a)
+ # AAC/MPEG-4 format (.m4a) is done locally, with inline tagging.
+ run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $M4AENCODER $M4AENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -w "$IN" -o "$OUT"
+ ;;
esac
done
# Only remove .wav if the encoding succeeded
@@ -737,6 +744,9 @@
if [ "$INTERACTIVE" = "y" ]; then
while [ "$DONE" != "y" ]; do
read ERASEPLAYLIST
+ if [ "$ERASEPLAYLIST" = "" ]; then
+ ERASEPLAYLIST=e
+ fi
case $ERASEPLAYLIST in
e|E|a|A|k|K) DONE=y ;;
@@ -764,7 +774,7 @@
ARTISTFILE=$(mungefilename "$TRACKARTIST")
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- if [ -n $STARTTRACKNUMBER ] ; then
+ if [ -n "$STARTTRACKNUMBER" ] ; then
# Get the trackpadding from the current track
CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
@@ -843,7 +853,7 @@
cdparanoia|debug)
if [ "$WEHAVEACD" = "y" ]; then
vecho "Querying the CD for audio tracks..."
- TRACKS=$( $CDROMREADER -Q 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
+ TRACKS=$( $CDROMREADER -d $CDROM -Q --verbose 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
CDPARANOIAAUDIOTRACKS="$TRACKS"
else
if [ -f "$ABCDETEMPDIR/status" ] && checkstatus cdparanoia-audio-tracks ; then
@@ -1354,7 +1364,7 @@
EDITCDDB=n
fi
if [ "$EDITCDDB" = "y" ]; then
- CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
+ CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d" " -f1);
# Use the debian sensible-editor wrapper to pick the editor that the
# user has requested via their $EDITOR environment variable
@@ -1387,7 +1397,7 @@
# Some heuristics first. Look at Disc Title, and if it starts with
# "Various", then we'll assume Various Artists
- if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2 -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
+ if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
echo "Looks like a Multi-Artist CD" >&2
VARIOUSARTISTS=y
else
@@ -1470,7 +1480,7 @@
echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
- if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d " " -f 1) ]; then
+ if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d" " -f1) ]; then
# This works but does not have the necessary error checking
# yet. If you are familiar with the CDDB spec
# (see http://www.freedb.org/src/latest/DBFORMAT)
@@ -1577,7 +1587,7 @@
WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
OUTDATA="$ABCDETEMPDIR/track$UTRACKNUM.$OUTPUTTYPE"
if [ -r "$CDDBDATA" ]; then
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d [:cntrl:])
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d [:cntrl:])
echo "Grabbing track $UTRACKNUM: $TRACKNAME..." >&2
else
echo "Grabbing track $UTRACKNUM..." >&2
@@ -1692,6 +1702,7 @@
SPEEXENCODERSYNTAX=default
MPPENCODERSYNTAX=default
NORMALIZERSYNTAX=default
+M4AENCODERSYNTAX=default
OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
# Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
@@ -1738,6 +1749,7 @@
SPEEXENC=speexenc
# mpp (Musepack)
MPPENC=mppenc
+M4AENC=faac
ID3=id3
ID3V2=id3v2
@@ -1773,6 +1785,7 @@
SPEEXENCOPTS=
# mpc
MPPENCOPTS=
+M4AENCOPTS=
ID3OPTS=
ID3V2OPTS=
@@ -2039,6 +2052,7 @@
spx) [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc ;;
mpc) [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc ;;
+ m4a) [ "$M4AENCODERSYNTAX" = "default" ] && M4AENCODERSYNTAX=faac ;;
*) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
exit 1
@@ -2100,6 +2114,12 @@
MPPENCODER="$MPPENC"
esac
+case "$M4AENCODERSYNTAX" in
+ faac)
+ M4AENCODEROPTS="$M4AENCOPTS"
+ M4AENCODER="$M4AENC"
+ ;;
+esac
# and which tagger
@@ -2144,7 +2164,7 @@
${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC}
${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT}
${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED}
- ${NEEDVORBISGAIN+$VORBISGAIN}
+ ${NEEDVORBISGAIN+$VORBISGAIN} $M4AENCODER
do
# Cut off the command-line options we just added in
X=$(echo $X | cut -d' ' -f2)
@@ -2207,37 +2227,6 @@
esac
fi
-if [ "$STRIPDATATRACKS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
- case "$CDROMREADERSYNTAX" in
- cdparanoia|debug)
- # cdparanoia can query the CD, so let's process the TRACKQUEUE list with the results.
- if checkstatus cdparanoia-audio-tracks; then
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
- else
- ## FIXME ##
- vecho "Querying the CD to obtain a list of valid audio tracks..."
- $CDROMREADER -Q > $ABCDETEMPDIR/cdparanoia-query 2>&1
- # Obtain a list of valid audio tracks from the results of the query
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-query | egrep '^[[:space:]]+[[:digit:]]' | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
- fi
- # Obtain the track padding value from the before-processing list and pad the CD list
- TRACKNUMPADDING=$( echo $TRACKQUEUE | awk '{print $1}' | tr -d " n" | wc -c )
- for TRACK in $CDTRACKQUEUE ; do
- TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
- PADNEWTRACKQUEUE=$(echo $PADNEWTRACKQUEUE $TRACKNUM)
- done
- CDTRACKQUEUE=$PADNEWTRACKQUEUE
- # Now, compare if the values in the list are valid tracks in the CD
- for TRACK in $TRACKQUEUE; do
- if echo $CDTRACKQUEUE | grep $TRACK >/dev/null ; then
- NEWTRACKQUEUE="$NEWTRACKQUEUE $TRACK"
- fi
- done
- TRACKQUEUE="$NEWTRACKQUEUE"
- esac
-fi
# Create playlist if needed (backgroundable) and start reading in tracks
@@ -2446,7 +2435,7 @@
# TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
TRACKNUM=$UTRACKNUM
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d [:cntrl:] | sed 's/ +$//')
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d [:cntrl:] | sed 's/ +$//')
splitvarious
fi
fi
the patches can also be found here http://www2.rudefyet.com:8080/patch
please post any other issues you have

not yet, i'm going to work all the kinks out before i submit it
as of right now I noticed some major typos, on my part, that cause it to fail...i'm working on that right now

Not able to find out the OCT 2012 CPU patch for 11.2.0.3

Hi
I am trying to download the OCT 2012 CPU patch for the 11.2.0.3 to install on Linux x86-64 which is having OS of RHEL 5.7. I am able to get the OCT 2012 PSU patch which include the CPU patch too.
Database 11.2.0.3.4 PSU Patch 14275605, or
GI 11.2.0.3.4 PSU Patch 14275572, or
But I just require only the CPU patch. Can anyone provide me the patch number or some link where I can download the Oracle CPU patch OCT 2012

The given link take to the window where CPU patch for all the quarter available.
The Critical Patch Updates released to date are listed in the following table.
Critical Patch Update Latest Version/Date
Critical Patch Update - October 2012 Rev 1, 16 October 2012
Critical Patch Update - July 2012 Rev 1, 17 July 2012
Critical Patch Update - April 2012 Rev 2, 19 July 2012
If I click on Critical Patch Update - October 2012 its takes to the window for selectin the database version (11.2.0.3). From there it goes to the Patch Set Update and Critical Patch Update October 2012 Availability Document [ID 1477727.1] which I had already checked.
There for the database products it shows the below option.
Table 9 Patch Availability for Oracle Database 11.2.0.3
+*<moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
It doesnt have the sepreate CPU patch. The below CPU patch is for the OC4J. I had a check.
Thanks
SHIYAS M

Patch for modbin6-1.00.38.exe is out.. "2MBIOS.BIN can't open!" Solved.

Hi mates,
ive decide to make a patch for modbin6 1.00.38 to improve stability and minise risk of modding the BIOS. for users which is reading this post if never heard about MODBIN better avoid reading below. its nice program for basic BIOS mod, simple to use, but very danger in the same time couse mess with BIOS and inproperty using may couse disaster. im not gona advert or to invite persons to use it. just wana make this program to be used normally to bring stability and minise risk of making corrupted BIOSes.. for persons which is already using it and have experience with him or with person Enthu which is wana try it and they dont worry if mobo may caouse for trash. there is 2 reasons to making this patch.
1. couse sometimes im using it there is features on it wchich gives basic stuffs, unlocking hidden features locked by manifacturer(sometimes really usefull especially for DIMM Vcore..). so there is a nasty bug on it which gona explain later. most of persons who is using MODBIN know about it. so that patch will spend me alot of time and minimise risk of mistake during avoiding bug couse operation need several procedure and automatised will risk free and much fastern.
2. to bring ability for most stable operations to persons which is already using it when need.
but lets talk about the patch. everyone know that nasty issue with MODBIN(made it by Borg N1,part from his collection). bug is program wont safe BIOS file and quiting with Abnormal program termination.... gives this one message: !!!File
2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38 how nice ...
here is Borg N1 advices:
Quote from: Borg Number One on 16-July-05, 05:24:51
Hi.
It is a kind of sad fact that many users just know how to use the mouse and keyboard.
Well, you have to configure your config.sys (Win9x/ME) or config.nt to run MODBIN6
(e.g. MODBIN6 2.01.01 (06/25))
in Windows prompt/console without problems.
The " FILES " & " BUFFERS " values are the important values.
http://www.xtremesystems.org/forums/showthread.php?t=45538
http://www.xtremesystems.org/forums/showthread.php?t=63210&highlight=config.nt
+++ BNOBTC & BNOBLG +++
http://bnobtc.pix-art.com
Borg advices is good but unfortuanly doesnt fix that bug... seems author dont have much idea why this is happend...error is constant ... Pure DOS also can't help... i wana add few more tips to the Borg's ones to improve stability when using modbin, after that will talking about patch.
TIP: navigate to this folder and open config.nt file: %SystemRoot%\system32\config.nt
at the end of file add this ones:
dos=high, umb
device=%SystemRoot%\system32\himem.sys /CPUCLOCK:ON /HMAMIN=64
FILES=40
BUFFERS=40
STACKS=9,256 -----> Preserving 039A-045Eh 3,152 Sys 039Ah Stacks, 0552h DOSX
Also MODBIN doesnt work well with long filenames.... etc "document and settings\my profile\desktp\modblabla" if not gona work property and there is a big chance of failure will load but after saving will have problems to update BIOS "core"(original.tmp) so always use 8.3 syntax standart .... best way from root directory make subdir whcih name to no NOT exceed 8 symbols... etc C:\123,C:\MYFLASH,C:\ROFL
without TIPs it is really big gamble with BIOS....
Aslo that will prevent Stack Overflow error when BIOS is loading....
NOTE: To activate changes just quit from any DOS interpretators like(4nt,command.com,cmd and so on). and re-run it. Reboot OS is not requred.
here how to do:
Also when executing MODBIN put below executable file this ones without quotes "loadfix forcedos modbin6-1.00.38.exe"
and ofcourse nasty error is waiting us... "2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38"
Patch which iv maked gona RIP this error forever.
Download: modbin6_1.00.38
Download: MODBINPATCH
What patch need? and how to use it? I named patch "Dynamic Patch for modbin" Couse isnt make modification on MODBIN program but momory his parent process when is loaded into memory.
tips suggested below is recommended but not nesecery for the patch.. patch need MODBIN and your BIOS file (modbin6-1.00.38.exe and mybios.bin) to be copied to systemroot drive(usually C) in folder MSI etc put modbin6-1.00.38.exe and mybios.bin(BIOS which you gona mod) to C:\MSI
Patch make checking if folder doesnt match will not continue....
How to use it..... Copy modbin6-1.00.38.exe and mybios.bin to C:\MSI, then from command prompt navigate to C:\MSI and execute "loadfix forcedos modbin6-1.00.38.exe" after that load your BIOS file... when loading is complete navigate to your patch folder and execute patchMSI.exe.... takes 10 seconds to complete after that make active "white" window and enter "Q" then hit ENTER key both windows will be closed, after that return to your modbin window, make what you gona make and save BIOS file like normal procedure... Method is founded and tested by me from years below never let me down(never brings corrupted BIOS), but just today ive made patch couse was too lazy... also Borg's MODBIN can work with most of all chipsets which is using AWARD Modular based... NOTE: K9 isnt tested. the most of here you can view how exacly to do it and differents with and without patch:
here is one more think some time maybe usefull from me:D
Here is 1st little short trick:(no analog anywhere, like patch only here can be found if accepted):
How to reset BIOS if you have nothink? Examples if you are administrator/PC-support or any and must fix same PC but the BIOS has an password?! And you dont have permision to open Case to reset CMOS(couse PC has an sticker with Warantly (and removing that sticker couse lost pc warrantly) You need access to BIOS to re-check,configure somethink there but its password protected. anyway there could be many situation. what we need? nothink special just bootable DOS(or analog- PC-DOS or whatever,doesnt matter where will boot(cd,flash disk,hdd)), no extended commands.[io.sys(jo.sys),command.com] - files requred to boot Here we go:
boot from desired device.when you see command prompt etc.: "A:\,C:\"
We will write a program without any languich..directly in PC code..(without compilator), direct in machine code.
write this:
copy con ffs.com|ffs *comment None
176.230p144144230q195 *comment Hold "ALT" and write number
^Z *comment "CTRL+Z" then hit "Enter"
Explain:
copy(internal command)
con (command line switch)
^Z (CTRL+Z)
NOTE: Numbers in second line must be written with holdon "ALT" key and specified numbers.(ASCI Code). Non numbers symbols is normal keyboard selection. on input display should look like:
copy con ffs.com|ffs
░.цpРРцq├
^Z
Program is 9 bytes long... (simple but high effective)
Thats it.Reboot Computer... password is gone. CMOS is reseted to default values. Tested on Award 4.0,6.0, AMI BIOS. Break all..
and finaly again:
**To All readers of this thread: Please note that this thread is with regards to Self-Modding BIOS and are of NO Official Testings from MSI. MSI will not be responsible for ANY Damage caused from requesting these self modded BIOSes! Please mind that you'll ONLY request and flash AT YOUR OWN RISK!!!** also MODBIN Author(Borg N1) and me is dont are NOT responsible for ANY Damage caused by MODBIN or Add On Patch. (i didnt think there is risk exit must must said that warning....couse playing with BIOS is always risky). Happy Tweaking.

Well, I was wondering if the system not allowing the tty to change ownership -- but root also has the problem.
You might try checking which shell is set for your users in /etc/passwd, and then check that the shell really exists at the specified path, and that it is executable. You might also check that the home directory for you users (also specified in /etc/passwd) is mounted and your user has the appropriate rights to that directory.
Other than that, I am running out of altitude, airspeed and ideas all at the same time. There was one thing in your trace I did not understand. Why is your system looking to the floppy drive? I wonder if that is contributing to the problem.

Can someonoe please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra softw

Can someonee please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra software. My software other than that problem works fine.

Couldn't complete what request? Way more information please.
What operating system?

Patch for Dreamweaver CS5 or 6 from Poodle Vulnerability

GoDaddy ran a security patch for Poodle and now Dreamweaver can't connect. FTP over SSL/TLS explicit encryption is used. Is there a patch from Adobe for Dreamweaver?

The perpetual license of CS6 is essentially Adobe's response to those folks who absolutely refuse to switch to the Creative Cloud Subscription plans. It's actually 3 versions (4 if you count Cloud CS6) removed from "current". Even though it's still available for purchase, it hasn't been receiving any updates and is getting further and further behind DWCC as time goes by.
Adobe has a phone number, you just need to dig...
Contact Customer Care
Click Dreamweaver > How-to's and troubleshooting > Troubleshoot > click the big blue Still Need Help button
That will give you Chat (if available) Phone (region specific) and Forums links

Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

hello,
After installing the Adobe reader, I got the following error message:
Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

I'm using my iPad with iOS v 6.1.3- is there a security patch for the SSL/TLS vulnerability for this, or do I have to go to 7.0.6?

I'm using my iPad with iOS 6.1.3. Is there a security patch for this version, or do I have to update to iOS 7.0.6?

There is an update for iOS 6... v6.1.6. But it is only available to iPhone 3GS and iPod touch 4th gen users. http://support.apple.com/kb/HT6146?viewlocale=en_US&locale=en_US
For iPad, the highest supported os for iOS 6 is v6.1.3. If you want to get the security patch, you'll have to go to iOS 7.0.6.
Hope this answers your question.
~Joe

Problem in applying the 6078836 OS Library Patch for Oracle HTTP Server

Hi ,
While installing Oracle ebusiness suite R12on a RHEL5 linux box (2.6.32-300.10.1.el5uek)
After running the installation, the post-installation System checks revealed that the HTTP, Virtual Directory, Login Page, Help Page & JSP services were failing. All the errors have the same error code RW-50015. ! Require Installing an OS Library patch for HTTP server according to Note ID
Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (32-bit) [ID 402310.1]
I am unable to stop the Database after stopping the Apps tier services. while trying to login into sqlplus hitting up this Error ! Please Advise
sqlplus: error while loading shared libraries: /oracle/VIS/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
[Oracle@OracleLinuxServer 11.1.0]$ cd
sqlplus / as sysdba
sqlplus: error while loading shared libraries: /oracle/VIS/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
Following is the Output of some commands which may help in understanding the Issue !
*[Oracle@OracleLinuxServer ~]$ cd /oracle/VIS/db/tech_st/11.1.0*
*[Oracle@OracleLinuxServer 11.1.0]$ find / -name libclntsh\* -ls 2>/dev/null*
*142017047 13416 -rwxr-xr-x 1 applmgr oinstall 13712482 Dec 19 01:27 /oracle/VIS/apps/tech_st/10.1.3/lib/libclntsh.so.10.1*
*142016603 0 lrwxrwxrwx 1 applmgr oinstall 17 Dec 19 01:27 /oracle/VIS/apps/tech_st/10.1.3/lib/libclntsh.so -> libclntsh.so.10.1*
*142443526 13400 -rwxr-xr-x 1 applmgr oinstall 13696149 Dec 19 01:28 /oracle/VIS/apps/tech_st/10.1.2/lib/libclntsh.so.10.1*
*142443190 0 lrwxrwxrwx 1 applmgr oinstall 17 Dec 19 01:28 /oracle/VIS/apps/tech_st/10.1.2/lib/libclntsh.so -> libclntsh.so.10.1*
*89850399 36348 -rwxrwx--- 1 Oracle oinstall 37174788 Sep 12 2008 /oracle/VIS/db/tech_st/11.1.0/inventory/prereqs/bin/linux/libclntsh.so.11.1*
*89719502 0 lrwxrwxrwx 1 Oracle oinstall 17 Dec 18 23:33 /oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so -> libclntsh.so.11.1*
*89719501 36276 -rwxr-xr-x 1 Oracle oinstall 37100033 Dec 18 23:33 /oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1*
id
uid=2000(Oracle) gid=2000(oinstall) groups=2000(oinstall) context=root:system_r:unconfined_t:SystemLow-SystemHigh
*[Oracle@OracleLinuxServer 11.1.0]$ env|egrep 'ORA|PATH' | sort*
LD_LIBRARY_PATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/oracle/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib
LIBPATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/oracle/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib
ORACLE_HOME=/oracle/VIS/db/tech_st/11.1.0
ORACLE_SID=VIS
ORA_NLS10=/oracle/VIS/db/tech_st/11.1.0/nls/data/9idata
ORA_TZFILE=/oracle/VIS/db/tech_st/11.1.0/oracore/zoneinfo/timezlrg.dat
PATH=/oracle/VIS/db/tech_st/11.1.0/perl/bin:/oracle/VIS/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/oracle/VIS/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/Oracle/bin:.
SHLIB_PATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib

Also I 've checked the /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/ opatch_history.txt
Find that the Patch version is same for every Patch: Please suggest..... Thanks!
Following is the all contents of the file:
*[Oracle@OracleLinuxServer opatch]$ vi opatch_history.txt*
Command     : apply -verbose -silent /nfs/bld/d26/PRDXBLD9/apps/apps_st/comn/autobuild/patch/patch/7639602/7639602
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-25_23-17-01PM.log
Date & Time : Wed Mar 25 23:18:41 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d22/AB/autobuild/passwd
Command     : apply -verbose -silent /nfs/bld/d26/PRDXBLD9/apps/apps_st/comn/autobuild/patch/patch/7627743/7627743
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-25_23-18-41PM.log
Date & Time : Thu Mar 26 01:23:19 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
Command     : lsinventory
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-26_01-23-19AM.log
Date & Time : Tue Mar 31 03:13:12 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d22/AB/autobuild/passwd
Command     : lsinventory -invPtrLoc /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/oraInst.loc
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-31_03-13-12AM.log
Date & Time : Tue Mar 31 03:13:18 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d22/AB/autobuild/passwd
Command     : lsinventory -invPtrLoc /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/oraInst.loc
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-31_03-13-18AM.log
Date & Time : Wed Dec 19 19:59:52 GMT+05:30 2012
Oracle Home : /oracle/VIS/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /oracle/VIS/db/tech_st/11.1.0/OPatch
Command     : lsinventory
Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-19_19-59-52PM.log
Date & Time : Thu Dec 20 00:03:59 GMT+05:30 2012
Oracle Home : /oracle/VIS/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /home/Oracle/6078836
Command     : apply
Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-20_00-03-59AM.log
Date & Time : Thu Dec 20 01:28:42 GMT+05:30 2012
Oracle Home : /oracle/VIS/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /home/Oracle
Command     : lsinventory -detail
Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-20_01-28-42AM.log

Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7.   A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip ‏34 KB

Just want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!

No patches for SLES 11 SP3?

Similar Messages

Maybe you are looking for