No payload,details in SXMB_MONI

Hi,
I am not able to see any payload in sxmb_moni,I can see the msg processed success and failure ,when I click the flag and go in I do not see any details or payload on the right hand side of the screen,I can only see the msg on the left hand side.What could be the problem?
Thanks

Hello,
on the left side under Inbound Message should be three folders (SOAP Header, SOAP Body, Payloads), under Payloads you should find it (with double click).
Regards
Patrick

Similar Messages

Response payload missing in SXMB_MONI

Dear All,
I have a query related to Response payload in SXMB_MONI.
I am using IDOC-XI-FILE & FILE-XI-IDOC asynchronous scenario . Output xml files and idocs are generated properly.
In SXMB_MONI,when I click on successful processed message it is not showing me the Response payload-MainDocument(application/xml).
I was able to see response payload in my Development server but in production server I am not able to see the reponse payload.
I am using SP15.
I tried to activate services also using t-code SICF but not able to solve the problem yet.
Can anybody suggest me solution to this problem.

Hi Prabhat,
we had the same problem when we upgraded to SP15, we consulted SAP and they came up with the answer that this is a known bug in SP15. This seems to have been fixed in SP16.
Regards,
Roberto
See Re: SXMB_MONI does not show payload after upgrade to SP15
Message was edited by: Roberto Viana

Payload different in SXMB_MONI and Message Monitoring

Hi All,
I am facing a problem. My message Payload in SXMB_MONI (after mapping) is different from what i got from Message Monitoring tab of RWB. In the message monitoring some entries are missing from my actual payload.
Payload from SXMB_MONI contains 300 entries
payload from Message monitoring contains 250 entries.
I am not using any module processor. Any pointer on "Why message payload got changed in RWB. ??
Thanks
Ajay

Hi Nallam,
The structure is simple like 300 nodes for items after mapping and these are to be inserted in to SAP tables using RFC. But in the Adapter engine enteries found were 250.
The same message when sent again worked fine but we have to find the root cause of the error.
Thanks
Ajay

Read payload failed in SXMB_MONI

Hi Experts,
I have a proxy adapter connection between XI and BI.
I have to read the payload for a particular feild, and put a field from the payload into a file, when the data fails in SXMB_MONI.
I am sure that the failed payload is stored in some SAP table, but can someone tell me the name? in tables like SXMSPMAST, i get only the status and NOT the payload.
though i am working in BI, i think tha tables for MB_MONI are same in XI and BI, hence i am posting it here...
This is very urgent, can someone pls help?
Thanks in advance,
Sushmita.

Check this thread and see if the tables mentioned in Michal's reply help,
In Which Database Table the Messages are Stored in XI
Regards
Bhavesh

Error while processing message payload Element PI SXMB_MONI (ECC to TM)

Dear Experts,
while processing an XML message in TM using receiver interface IntracompanyTransportationRequestRequest_In , we encounter an error message.
<SAP:Stack>Error while processing message payload Element 'StockTransportOrderReferenceIndicator' missing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
ssee screenshot attached.
The field StockTransportOrderReferenceIndicator cannot be located in ECC and I cannot find what the system is expecting to populate here.
Can somebody propose an approach on how to investigate into this error message for the solution?
thanks a lot
Salvador

Hi Salvador,
Thanks for your reply. We were able to fix that issue. As of now we have managed to send sales order to TM but getting the following error. Messages are getting failed in SAP TM. Even if the product exists in the system (TM) still the error message persists. I have CIFed location, business partner, product from ECC and everything exists in SAP TM with the same business system group. Kindly advise. Did you happen to face any similar kind of issue during your implementation ?
Thanks & Regards,
Aunkur De

Unable to see payload details in BPM Worklist app

Hi Experts,
When i am approve the request from http://localhost:8001/integration/worklistapp getting the below exception
[2012-07-18T21:22:35.651+05:30] [soa_server1] [WARNING] [] [oracle.adfinternal.view.faces.lifecycle.LifecycleImpl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JYQmbFn0Rt0Knyh8in1G1gw30000VU,0] [APP: DrmRequestProcessingTaskFlow#V2.0] ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6[[
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
javax.faces.FacesException: javax.el.PropertyNotFoundException: Target Unreachable, 'requestInfoView' returned null
where i am creating the request in through the web application which has been deployed on SOA_Server1 managed server.
Your help is highly appreciated. Please post the reply ASAP if anybody has experienced with the similar kind of issue.
Regards,
CH

Hi Experts,
When i am approve the request from http://localhost:8001/integration/worklistapp getting the below exception
[2012-07-18T21:22:35.651+05:30] [soa_server1] [WARNING] [] [oracle.adfinternal.view.faces.lifecycle.LifecycleImpl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JYQmbFn0Rt0Knyh8in1G1gw30000VU,0] [APP: DrmRequestProcessingTaskFlow#V2.0] ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6[[
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
javax.faces.FacesException: javax.el.PropertyNotFoundException: Target Unreachable, 'requestInfoView' returned null
where i am creating the request in through the web application which has been deployed on SOA_Server1 managed server.
Your help is highly appreciated. Please post the reply ASAP if anybody has experienced with the similar kind of issue.
Regards,
CH

Sxmb_moni does not show payload

Hi all,
I have created a file to file scenario but when I execute it I can not see the outbound payload in the sxmb_moni and execution is successful. With other scenarios like file to idoc or idoc to file I can see the outbound payload.
Any idea?
Thanks
Diana

go to sxmb_adm> integration engine configuration>change global data and check if the variable tyte:
RUNTIME................LOGGING................0
RUNTIME................LOGGING_SYNC......0
were setted.
also go to RBW>components monitoring>Adapter Engine-->cmmunication channel monitoring.
check if you are facing any problem when you get data from receiver system.
Thanks
Rodrigo

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

Getting Error IN sxmb_moni for FILE TO FILE SCENARIO

Hi ,
 I did File to file scenario by using Content conversion ..(that is from .TXT format to .XML format) for a single record it was working fine.. if i put 0: Unbounded in my source structure means i'm getting this following error ..
my source structure is like this :
SENDOR_DT
 STUDENT
 DETAILS
 NAME
 NO
 ADRESS
 BRANCH
SO, I PUT Details as 0: Unbounded.. if i did't put as unbounded means it's working fine for a single record.. but if i put Unbounded means immediately i'm getting the following error ...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_TRNG_TEST_1_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_TRNG_TEST_1_MM_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
plz provide me the solution..
Thanks
Babu

Hi Babu
please check whether the occurence of the target structure in multiple times or not. if it is 1..1 then change it to 0..unbounded.
case2: take the payload from the sxmb_moni and put tha payload in the message mapping you will come to know where is the error.
if still have the problem please reply back
Thanks
Rinku
Hi babu
check whether the occurence for the target node is 0..unbounded.
Thanks
Rinku
Message was edited by:
 Rinku Gangwani

Runtime error in xi abap stack -while getting AE logon details

Hi XI gurus
We are getting a error in abap stack , transaction SMQ2 in XI box - whose details in sxmb_moni are as follows
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
When we look at the error trace in sxmb_moni, I see the following :
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 30971</Trace>
<Trace level="2" type="System_Error">HTTP-Client: exception during receive: HTTP_COMMUNICATION_FAILURE</Trace>
</Trace>
</Trace>
Is there a RFC destination to adapter engine from ABAP stack that is failing here ? What should we check ?

Hi
Please perform below tasks
1. Please check INTEGRATION_SERVER_HMI rfc is working fine using SM59 transaction
2. If you are using RFC detination to connect to Proxy system, then i suggest you to check the connection
3. Have a look at SAP Note 755372, 634006 and 773830 for the solution.
4. refer to this blog - /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
5. If still problem persist please post us the ICM trace file
Regards
Sekhar

How to get the value of payload?

Hi
The null is returned when I use the following code to get the User_ID element in the payload, but there are values in the User_ID element of the payload
Task task_test = wfSvcClient.getTaskQueryService().getTaskDetailsById(wfCtx, taskId);
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getNodeValue());
How to get the node value of payload ? any suggestion?
Thanks
Jayson

Hi Jayson,
Try:
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getFirstChild().getNodeValue());
So add the getFirstChild() call in between.
If this works, maybe consider using JAXB to marshall the payload details to POJO's. This will make reading the payload details much easier.
Regards, Ronald

How to know the payload size of message

hi can anybody tell me how to know the payload size of message?
Message was edited by:
vvr murty

Hi,
To know the size of the input message , i hope we have one option , after copying the test payload from the SXMB_MONI into Message mapping test -- click on test
after come back to design tab in message mappign
click on left side root node and Press CTRL+SHIFT + mouse right click and click on trace -- you can see the size of the message payload.
In SXMB_MONI..
see the payload messges
also see the below link
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Regards
Chilla

How to get the node value of payload

Hi
The null is returned when I use the following code to get the User_ID element in the payload, but there are values in the User_ID element of the payload
Task task_test = wfSvcClient.getTaskQueryService().getTaskDetailsById(wfCtx, taskId);
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getNodeValue());
How to get the node value of payload ? any suggestion?
Thanks
Jayson

Hi Jayson,
Try:
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getFirstChild().getNodeValue());
So add the getFirstChild() call in between.
If this works, maybe consider using JAXB to marshall the payload details to POJO's. This will make reading the payload details much easier.
Regards, Ronald

An Attachement for the payload of the message monitoring.

Hello ,
From the forum links, I found that to access a message payload for the message monitoring, we need to call cl_xms_persist->read_msg_all.
and the export parameter would give the payload message as an attachment.

But when I tried to find if there is any attachment with the messages I dont see them (size comes with the value 0).
 CALL METHOD ex_message->numberofattachments
 RECEIVING
 size = size.

Is there any other option available to get a payload for the message?
Thanks a lot.

Hi Arjun,
 You can see your payload in Tcode SXMB_MONI
 SXMB_MONI-->
 MONITOR FOR PROCESSED XML MESSAGES-->
 click F8 (if required change the date of execution from to select specific message on date range)-->
 Double click on the right most 3D button type of box before the flag icon,
Now you will be able to see the Different pipeline Execution steps(7 Steps) that Your message has under gone .Click on any one of them and see your payload in payload folder at each and every step.This helps us in understanding the way your message is undergoing transformations through out its journey from sender to receiver.
VIRTUAL RECIVER..Is actually a part of an annonymous and adressable unit like service to simulate the receiver that is participating in B2B communication.Its jus a mandatory parameter that has to be mntione din Receiver deternination when We test our B2B scenarios using this option in ID part of PI/XI.
Thanks,
Ram.

HTTP adapter: Query string with no payload

Hi,
I have a requirement where I want to send an HTTP request where the only thing I need to send is the Query String (ie. no payload details)
Is this possible to do this ?
I know how to set the query string (TargetURL) but unsure how to suppress the payload without any issues.
Knd regards
Colin.

Hi Collin, Did you find the solution? I am facing similar problem where I do not want to send any xml/payload. Invoke PI interface with URL only. Please help.

No payload,details in SXMB_MONI

Similar Messages

Maybe you are looking for