No Payroll available to run Payroll Archiver

Hi,
I just ran a Quick Pay for an employee and want to push that to Archiver. I tried to run the concurrent program Payroll Archiver but no value available for Payroll Name or Consolidation Set parameters. Please advise if there is process needed to run or Profile needed to be set?
Thanks!

Please ensure you have run pre-payments process before running the Payroll Archiver.
Otherwise, responsibility like US HRMS Manager / India HRMS manager (depending on legislation) will let you run the Payroll Archiver conc program.
Regards,
Raghavendra

Similar Messages

PAYROLL ARCHIVE PROCESS CAN NOT SEEN ON THE REQUEST SET FOR SUBMIT

Dear all
kindly please i need your help.
i was on the payroll process running.
i have run payroll run--->PrePayment--->Payroll Archiver not found.
Kindly please suggest any......what should i done.

It's not possible with this setup. You have connected the E3000 LAN-LAN. With this setup you cannot set a gateway address on the E3000. Thus all it knows about is the connected LAN. Nothing else. You cannot access the E3000 from anywhere but your LAN subnet 192.168.0.*.

Table for Payroll Archive process

Hi ,
I need the table in which the data for payroll archive process is stored.

Payroll Archive Information goes in "PAY_ACTION_INFORMATION" Table .
Important Points about this table :
1. When the value of the column "ACTION_CONTEXT_TYPE" is 'PA' then the row stores Payroll Level Information and the corresponding ACTION_CONTEXT_ID is the "PAYROLL_ACTION_ID" of the Payroll Archiver run. Note that "PAYROLL_ACTION_ID" is the primary key of PAY_PAYROLL_ACTIONS
2. When the value of the column "ACTION_CONTEXT_TYPE" is 'AAP' then the row stores Assignment Level Information and the corresponding ACTION_CONTEXT_ID is the "ASSIGNMENT_ACTION_ID" of the Archiver for the assignment. Note that "ASSIGNMENT_ACTION_ID" is the primary key of the table "PAY_ASSIGNMENT_ACTIONS" .
The following query can be used to fetch all the archived information for a particular run for a particular assignment :
SELECT pai.*
FROM pay_action_information pai,
pay_payroll_actions ppa,
pay_assignment_actions paa
WHERE ppa.request_id = :request_id
AND ppa.payroll_action_id = paa.payroll_action_id
AND paa.assignment_id = pai.assignment_id
AND paa.assignment_action_id = pai.action_context_id
AND pai.action_context_type = 'AAP'
AND pai.assignment_id = :assignment_id
The following query can be used to fetch all payroll level information pertaining to a particular run .
SELECT pai.*
FROM pay_action_information pai,
pay_payroll_actions ppa
WHERE ppa.request_id = :request_id
AND ppa.payroll_action_id = pai.action_context_id
AND pai.action_context_type = 'PA'
Please note that for 'Year End Archiver' all the information is stored in FF_ARCHIVE_ITEMS

Rollback Payroll Archive

Hi,
If we do balance adjustments after payroll archive and further processess like check writer/NACHA etc, then the balance adj data does not reflect in Payroll Archive tables. Also the payslips show incorrect balances.
What should be the process followed getting correct data reflect in pay_action_information and payslips?
Is it mandatory to rollback Pre-Payments process too? What will be the effects of not rolling back prepayments and just rollback & rerun of archive?
Any help appriciated.
Thanks,
Sandip

i would open a SR to verify if balance adjustments are taken into account by the archiver. Or adjust them in the next month, run prepayments, and see if it is picked up.
Rolling back prepayments (and magnetic tapes/checks) is not recommended, once your employees have received that money.

How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)

How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work (on prior iPhones) before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)
I don't get it, I read one post about why would we have to buy an AirPrint Printer when we have used the "print to a wifi printer" just fine in the past? Yes I feel that's exactly what's happening to me now too. I want to print from my iPhone and iPad to my WiFi Printer which is also now connected to my Airport Express WiFi network just fine. No problems.

Very glad you added that bit of information because I see different problems similar to this. I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check.

Availability check run requirement in the Sales order Save user Exit.

Hi Gurus,
As per the requirment we are using a user exit SAVE SALE ORDER PREPARE for BOM purpose to reconfirm the confirmation qty.
Now we need to add one more logic in the same user exit, which will run the availabilty check run for each of the line items of the BOM and consider latest confirmation qty from it. So my concern is it possible that we can call the availabilty check run event with in the user exit SAVE SALE ORDER PREPARE or this not advisable?
Please let me know..
Regards,
Babs

HI Venkat,
Thanks for your reply.Yes you are right availability check runs automatically at sub item level.
But please note the customer requirment iteself is is little different from std BOM configuration.
Currently the availabilty check is activated both at header and sub item level. They are maintaining the stock for header and sub item level.Also the these sub items are some time being sold as invidual materials. hence there exist a mismatch in the stock value between header and sub items.
when a sales order is created both header and sub items will have confirmation with different value between each and the same mismatched values are being passed in to delivery. But the deliveries can not be processed for PGI because of the mismatched confirmation qty between header and item level.
I guess now you the rrequirment.
So we are using the SAVE SALE ORDER exit which will re check the confirmed qty between header and item and takes lowest confirmed qty and change the confirmed quantities from all the line items to lowest one, so that confirmation qty among all the line items are same. This is the first logic we are planning.
Further there is one more additional process BOP need to be run for this header and sub items, which will change the confirmed qty based on the latest stock for individual line item. even in this case also the user exit SAVE Sale order is being called but we need to run the availability check run additionally because of which our requirment will be taken care.
Regards,
Babs

When an internet connection is available, I run iTunes and it shuts down on my Windows 7 64bit computer.

When an internet connection is available, I run iTunes and it shuts down on my Windows 7 64bit computer. It used to crash when I went to the iTunes store but, after installing the newest version of iTunes it crashes if there is an internet connection. I can turn off my internet access and then run the software but, once I try the iTunes store again it crashes. It does not give an error message as to why its doing this. Just says it encountered a problem. I cannot do anything with my iPad or iPod without this working. Its extremely frustrating.
I have also contacted Apple several times and they give me links to other's problems but, none have worked to fix this.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

It would "run" (more like Sunday stroll or walk) if you installed Snow Leopard in a VM. Especially if you have 6-core (and would help to have 6 or 8 cores anyway if you were able to and intend to make best use of nMP for video editing).
If you "classic" Mac Pro was 2009 or later, adding two AMD graphic cards, upgrading the processor to 8-core 3.xGHz would have gotten you a FCP-X capable machine and still dual boot and use Snow Leopard as needed.
Any Mac Pro can now use 1000MB/sec SSD PCIe blade to boot from and/or for scratch and editing to help improve work flow.
SSD Blade Drive for "Classic" Mac Pro

There is not enough memory available to run this program

Hi!
I am trying to install Oracle 9i Personal Edition of a P-4 machine with 37GB hdd space (primary partition) with 768mb of installed RAM on Windows 98 SE. After installing 100% with typical settings of General Database, during the database configuration it gives out me an error message saying "There is not enough memory available to run this program. Quit one or more programs, and then try again" though I have 88% of RAM free and no other programs are running at this time. Please help.

Hi!
I am trying to install Oracle 9i Personal Edition of a P-4 machine with 37GB hdd space (primary partition) with 768mb of installed RAM on Windows 98 SE. After installing 100% with typical settings of General Database, during the database configuration it gives out me an error message saying "There is not enough memory available to run this program. Quit one or more programs, and then try again" though I have 88% of RAM free and no other programs are running at this time. Please help.

Trying to run an archive, file or anything else

Hello, I'm trying to run an archive (An image, a text archive, etc) using the File object...
I was using this code:
        try{
            file = new File("D:/gnd_1024_2.jpg");
            r = Runtime.getRuntime();
            r.exec(file.getName());
        }catch (Exception e) {
            e.printStackTrace();
    and an Exception Ocurrer, how Should I do it?
Thnx

You can not "run" an image, you need to run an application to use on the image.
I believe the application "start" will work out which application you have set as the defualt app for a document, and run that. Search the forum for more info on it.

HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help

Should I use a network switch and plug my Yamaha A/V receiver and Yamaha DVD into it, then into the wireless router? Then the net into the routers net port???

HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help

HR & Payroll Archiving

Hi,
Can anyone explain the activities to be carried out by a SAP HR consultant for achiving HR & payroll data?
Any checklist has to be followed for pre archival and post archival?
Thanks
Rajesh

Please refer to the help online which provides a very good comprehensive guide for archiving HR data :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/03/627c35bd413a72e10000009b38f889/frameset.htm
Also refer SAP note 25622- Archiving in HR, which may help with further inputs
Regards

How to monitor available disk space in archive directory

I need to monitor the available disk space of the archive directory during a long running PL/SQL program which does a lot of inserts and updates. This program is running in a background session and should regularly check for the available space. If there is less then a customizable number of MBs free the program must terminate itself. How can I access this information from the file system? (I'm using 8.1.6 and the application will run on both AIX and NT)

The directory itself is not taking space (It actually does but in most cases you can neglect its size). It is files that it has that take space. Also, the more files you create the more space gets allocates from the media that holds them. And the last, the media (Hard Drive, Floppy, or other) has free space, not directory. That is how all OS's that I know about work.

Want to run an archive and install, but can't empty trash to free space

I don't know where to begin... at some point recently something caused problems with several applications, so after trying to repair permissions and repair disk with no luck, I decided to archive & install. Now I want the old problems back: Word/Excel/Photoshop will not open because of some library error (Carbonlib?), and my network settings keep going screwy such that if my computer goes to sleep, I couldn't pick up my wireless signal anymore without restarting (and then ta-da, there it was like there was never any problem).
So in trying to archive and install I keep stalling at the very beginning... I'll leave it for hours hoping it would proceed but it wouldn't. I've repaired disk several times, with the same errors ultimately coming up. So without being able to archive and install I figured I'd better back everything up and do an erase & install. Started backing things up in prep for moving them onto a server, but when I plugged the server in, my computer said it couldn't get on. Same exact server wire had just come out of my work computer which connects just fine. So now I've got duplicates of all my files on the desktop, so I try to trash them and when I select 'empty trash' or 'secure empty trash', I get the box that says "preparing to empty trash" and then everything except my wallpaper goes away, and eventually comes back as if I've restarted. Now I definitely can't archive and install because with duplicate copies of all my files I have only 1.7gb available and need 1.9 to install just the required files.
I'm at a total loss! Incidentally, my ipod won't mount if I try to plug it in.
Are there other options in disk utility that I can try? I don't know enough to feel comfortable just trying something, and I don't know what the "Restore" option does.
Oh goodness, I hope somebody knows something that can help me out of this.

http://discussions.apple.com/thread.jspa?messageID=3366422
Odd, the link works for me.
-mj
[email protected]

No Payroll available to run Payroll Archiver

Similar Messages

Maybe you are looking for