No PC Boot Camp partition connection

My Airport Extreme connected immediately on Imac side (OS-X, 10.6.6) but Airport utility doesn't recognize base station(running Windows XP, SP3) on PC side. Just finished over-phone session with Apple Support but nothing on Apple side appears to be the problem according to them. Help!!!

c68gym wrote:
Airport utility doesn't recognize base station(running Windows XP, SP3) on PC side.
Welcome to Apple's discussion groups.
Did you install the Mac drivers into Windows? I know that this can be done by inserting an OS X installation disc while Windows is running, but since I don't use Boot Camp myself, I'm not sure how that works with driver updates.

Similar Messages

  • How do install windows hard drive (from dead pc) into boot camp partition

    My Windows 7 desktop died recently, so I took the opportunity to buy a Mac Mini (latest version as of Feb 2012) as a replacement.  I want to transfer  the Windows 7 installation (from the dead PC) including all applications, accounts, settings, user files, etc to the Boot Camp Partition.   Can someone please provide the steps on how to perform the Win 7 migration to the Mac Mini. 

    Just to clarify:
    I want to install the Windows 7 installation from dead the PC into the Mac Mini's Boot Camp partition.
    I installed the PC's hard drive into an enclosure and connected it to the Mac Mini via the USB port.
    What I want to do is the following:
    1) Do a Windows 7 "fresh" install in the Mac Mini Boot Camp partition.
    2) Migrate all the applications installed on the  Windows 7 PC and their associated data.
    3) Migrate all user accounts and data.
    Is there a tool that can transfer all applications and user accounts from the Windows 7 Hard Drive to the Boot Camp partition on the Mini?
    Based on the documentation the Window Migration tool is Lion OS utility and does not perform a complete migration of all applications installed on the Windows machine.
    thank you.

  • Late 2013 MBP/Fusion/Boot Camp partition w/Windows XP (!), can I get Bluetooth working or should I give up?

    Hello and please bear with the length of this post.  I had an old MacBook Pro (2007 Santa Rosa) that ran Windows XP in a Boot Camp partition just fine.  One thing Windows has that the Mac doesn't is a free OBD2 app that lets me communicate with a Bluetooth OBD2 scanner to reset my check engine light and read the codes.  This scanner uses Bluetooth.
    A few months ago by a stroke of good luck I got a new Retina MacBook Pro.  Windows XP will not install on it, only Win 7 & 8 (I don't have the install disks anymore anyway).  I did not want to buy a new Windows just to run this one program (the only Windows app I really need).  I thought I could possibly run my old Win XP Boot Camp partition (now in an external USB3 case) under Fusion, and it turns out that I can indeed do this.  However I can not get Bluetooth to work – Win XP, under Fusion, does not see any Bluetooth hardware.  I got some help on the Fusion forum – I was told to uncheck the Share Bluetooth devices with the virtual machine box and check the Apple Bluetooth USB Host Controller box to connect Bluetooth to the virtual machine.  WIn XP, under Fusion, does not seem to see any Bluetooth hardware.
    My question is, do the Boot Camp drivers originally installed when I first used Win XP on my old Santa Rosa MBP have any role here?  I was thinking I might have to update those drivers since I'm on a new Retina MBP, but the update notes specifically say the newer drivers are for Windows 7 and 8.  I haven't tried to install them yet – maybe they'll even refuse to install, I don't know.
    If I'm truly wasting my time trying to get this to work I'll fork over the $40 for the Mac OBD2 software, although I really only need it for a "single use" (trying to pass a state inspection, lol!).  TIA for any help!

    Please ignore the last message - I was hoping I could delete the thread but it looks like I can't.
    After a little more investigation I've decided to give up this quest and pay the $40 for the Mac software.

  • Boot Camp partition moved to external:"No bootable device found"

    I have just installed a new SSD, moved my old OSX partition to the new drive and am currently using the old hdd in an enclosure as an external hard drive.
    I can access all my files on my old OSX partition and my bootcamp partition when connected to my laptop. However, when i try to boot from my old bootcamp partition i get the "No bootable device found -- insert boot disk and press any key" message. That is when i boot from Startup Disk and target the bootcamp partion.
    When restarting my computer with the external harddrive connected and pressing the option key i only get "SSD" and "Recovery" as options, it does not recognize the external harddrive as a startup option at all.
    Is there anything i can do to use my old boot camp partition again? It worked perfectly fine before being external to the computer.
    My computer is a 2011 mbp with Mavericks, my boot camp patition is installed with windows 7.

    Microsoft requires that the partition for Windows be on an internal disk. It will not see an external drive as bootable.
    Allan

  • Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

    Firstly, let me lay out my situation. I have an old MacBook Pro (2,2) with a broken disk drive. It was dropped in its youth and can no longer read from or write to CDs or DVDs of any kind. I have just recently bought a new MacBook Pro to replace it (6,2) and am currently trying to convert the old computer into an XP machine through Boot Camp. I'd like to be able to do so without having to buy an external disk drive.
    After a clean install of OS X (10.6.3) onto the old machine, I successfully partition 85GB of space (although I previously attempted the same with a 32GB file system to no avail as well) for XP to be installed upon. Because I cannot boot my XP install disk directly from the broken disk drive, I then close Boot Camp Assistant and shut down the computer. I start it up in Target Disk Mode to be accessed from the new MacBook (6,2).
    Once the old MacBook is connected, I insert my XP install disk into the new MacBook (6,2) and boot from the disk. After allowing the XP (Professional) boot to load the install files, I arrow-key down to my 85GB partition (FAT32, named standard as "BOOTCAMP") on the old MacBook (2,2)'s hard drive and select it as the partition I would like to install to. This is where I am directed to a new boot window that tells me in a series of paragraphs that the XP installer cannot reach the selected partition for what seems to be a number of reasons. What it seems to be trying to say to me is that it cannot do a remote install of XP on a Target Disk Mode-connected machine, while not "knowing" that I am trying to do so. It's a similar message to the one that Boot Camp Assistant shows when one tries to create a Boot Camp partition on a machine that is being accessed via Target Disk Mode (Apple puts it much more clearly than Microsoft).
    I'd be perfectly content, albiet slightly vexed, to conclude here that it is not possible, shuttle over to the nearest Best Buy, and purchase an external disk drive if it weren't for one thing: I tried the same thing two weeks ago with Ubuntu 10.10 and it installed perfectly on the Boot Camp partition I had created then (I have since wiped all and installed OS X cleanly on the laptop).
    Here comes the point/questions:
    If the Ubuntu boot disk can access the partition, why can't the XP boot disk?
    Is there some way to convince the boot system that the drive is local, rather than being accessed via Target Disk Mode?
    Is there an easy solution that doesn't even require that, and will allow me to install to the disk over a firewire connection?
    If anyone's knowledgeable and/or brave enough to tackle this one, I'll be eternally grateful. Heck, I'll be grateful if anyone even attempts to tackle it.
    Thanks,
    -Alec Page

    Windows XP will only install from the optical drive. Target Disk Mode does not work with Windows volumes. Windows will not install from any external device.

  • Copying a disk which has a boot camp partition

    Colleague has an iMac with a boot camp partition, and the disk has failed.  It won't boot off the mac partition, although the windows partition works fine.  He bought a new 1T disk and we are trying to copy his disk on to it, and will then install the new disk into the iMac.
    So it's booted up using the SnowLeopard install disk and I am running disk utility.  First I tried to partition the disk into something that looks like the partition scheme on the current disk -- big partition for os x, little partition for windows, although big & little are 750GB vs 250GB as opposed to the smaller version on the 260GB original.
    Then I tried to use the Restore to go from the old bootcamp partition to the new MS-DOS (fat) partition on the new drive.  This failed.  First it resized the fat partition down to an ever-so-slightly smaller partition than the NTFS original, and then generated an error because the partition is too small.
    How do we do this?

    Loner T wrote:
    1. Do you have a TM backup of the OSX which came from this "failed" disk? It may just be a matter of reinstalling OSX too work around bacd blocks?
    My boss tried that about a year ago, but it failed again after not too long.
    2. What is the failure when switching to OSX from Windows?
    Not sure.  Now when I option-boot the machine I can't see either partition -- I can see the installer dvd and the new drive in its external enclosure.
    3. Windows can be installed only on the internal disk, which is a Windows restriction that BC enforces. Apple allows OS to installed on external drives. Ask Gates/Ballmer/Nadella why?
    4. Yes, you can get data of the disk, not matter how it is connected, internal or external. It is tricky to take a Volume and move it. Can I suggest an investment in Winclone to backup and restore (http://www.twocanoes.com/products/mac/winclone) Windows?
    5. Yes, but I would recommend putting Bootcamp Windows back as BC/Windows, rather than virtualizing it using Parallels.
    Well moving the new disk in to the iMac is one of the tasks we need to accomplish, so we can do it now.  My plan was to use dd to move the data from the partition on the old drive to the partition on the new drive, once we can get Boot Camp Assistant to create it.  Winclone looks like a great product, but it's $29.  Parallels is only $79, and if a disk fails or you migrate to new hardware all of the Parallels vms come over effortlessly using Setup Assistant or Migration Assistant.

  • Accidentally Unmounted Boot Camp Partition

    Hi,
    I had accidentally unmounted my Boot Camp Partition the other day. When I mounted it back using disk utility, it didn't show up under Startup Disk. The partition still shows up on my Desktop and the windows files are still in tact.
    This is what Disk Utility showed:
    Name : disk0s3
    Type : Volume
    Disk Identifier : disk0s3
    Mount Point : /Volumes/Untitled
    File System : Windows NT File System (NTFS)
    Connection Bus : Serial ATA 2
    Device Tree : /PCI0@0/SATA@1F,2/PRT2@2/PMP@0/@0:3
    Writable : No
    Universal Unique Identifier : F7D4C476-E67F-41A4-BD31-900E40EA3D21
    Capacity : 201.0 GB (215,795,892,224 Bytes)
    Free Space : 175.1 GB (187,998,601,216 Bytes)
    Used : 25.9 GB (27,797,286,912 Bytes)
    Number of Files : 142,474
    Number of Folders : 0
    * Owners Enabled : No*
    Can Turn Owners Off : No
    Can Be Formatted : No
    Bootable : No
    Supports Journaling : No
    Journaled : No
    Disk Number : 0
    Partition Number : 3
    When opening Boot Camp Utility, it gives me the following message:
    +Boot Camp Assistant cannot be used: You must update your computer's Boot ROM firmware before using this setup assistant.+
    My Boot ROM firmware is up to date, Boot ROM Version: MP41.0081.B07
    Also, Mac OS takes more than 10 minutes to load during startup. I have never experienced this problem before. Could this be related to the accidental unmount-ing?
    Appreciate some help

    It's gone, the icons in finder are just icons. You will have to reinstall and restore your backup if you have one.

  • How to update xp to sp3 on boot camp partition

    I am running Windows XP via boot camp (only to use cad drawing program) Each time I try to update windows to SP3 I get the message that I have not got enough memory to do this ( or the update crashes and then uninstalls SP3 )The boot camp partition is 34 Gb as default  The Imac has 3gb ram with a 320 hard drive memory what do I need to do to update to SP3 in order for bit defender 2012 to run
    I have virtually nothing on the boot camp partition apart from the cad programme which I do not think is very big

    Anything non-essential connected during the update ?
    Like external harddisk, printer, scanner, etc.
    If so, disconnect prior to starting the update.
    Run a CHKDSK http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/c hkdsk.mspx?mfr=true before attempting the next update.
    Maybe some error turns up.
    Stefan

  • How can I get Lion to recognize my boot camp partition.

    Yesterday morning I found my mac suffered from a b-tree failure and was unable to access OS X 10.6. I ended up booting into my Boot camp partition of Windows XP and backed it up then reinstalled Snow leopard. Then I upgraded to Lion, saw it fail due to a partitioning issue, created a 2gb partition called Mac HD 2 (by shrinking mac hd), saw i could install but not full install. So I created another partition and installed Lion successfully. Got into Lion and shrunk my 2x 2GB partitions into one 4GB partition. My Windows XP hard drive boot camp partition was still on my desktop. I can access all the files but I can not boot into it. When I hold down the option key there is only Mac HD or Recovery partition.
    Is there any way to get the boot camp partition to work?
    I did notice that when I was looking through the settings I could choose which HD was the default boot option. Mac hd with 10.7 and a folder called Windows XP were both available.

    We also cannot get Robohelp to recognize our FrameMaker installation. 
    We are using Robohelp 9  and Framemaker 11.
    We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so.  So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
    The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
    "This operation cannot be completed without FrameMaker.  Install FrameMaker and try again."
    I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error.  Buying a set of new Robohelp 10 licenses probably isn't an option.
    Any other suggestions?
    Thanks,
    Sue

  • Boot Camp partition not showing in startup disk or when holding alt key

    I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
    I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
    I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
    I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
    I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
    Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
    Let me know what other info I can give you so that you can please help me!! Thanks in advance!

    In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

  • How do I make a clone of the Boot camp partition?

    My MacBook Air (10.6.8) is having problems and I need to send it away for repairs. Before I do that I want to make a clone of everything and put it on my new MacBook Pro (10.7.2)
    I am making a clone of the Mac partition using Carbon Copy Cloner. That has worked well as a backup for me.
    The only problem is I need to make a clone of the Boot camp partition (Windows partition) and I don't know how.
    I want to make an exact clone so it has all the operating system, files and everything.
    The other question is when should I make a Bootcamp partition?
    Should I migrate the clone to the new mac using Migration Assistant, and then make a boot camp partition? And then what are the exact steps putting the clone onto the boot camp partition?
    Thanks for any help.

    Here are some previous coments made on this forun regarding backup of a Boot Camp  partition. I use Paragon HDMSuite 2011.
    Casper 6 does seem to work;
    WinClone was handy for XP users but doesn't for instance check for errors during the backup only during restore.  Winclone was discontinued at 2.2, all 2.3 versions are hacks (removal of the OS check seems to be the main thing) There has been no deveoplment or support for a while now.
    Acronis 2011 w/ plus pak, didn't work well previously
    Ghost 15 - probably not
    Casper 6 works for Windows on Boot Camp only
    CopyCatX is more lengthy and sector copy so takes the longest.
    Paragon Hard Drive Suite 2011 because it works great
    and they have CampTune
    Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
    I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
    I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
    HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
    Since this is you first time backing up your partition, I would suggest using one of the Backup Wizards. They'll guide you through the backup process and keep you from doing something wrong  Similarly, use the Restore Wizard to restore your partition/drive.
    HDMS 2011-  back up a dual-boot Mac to an external USB drive, do:
    1) Boot from the Recovery Disk (I'm assuming that the backup hard drive is attached before you reboot)
    2) Select Paragon Hard Disk Manager
    3) Launch the Backup Wizard by selecting Wizards > Backup Wizard
    4) Select the Mac hard disk (not the partition) where it asks "what to backup"
    5) On the Backup Destination page, select "Save data to any local drive or a network share"
    6) Hit the radio button for the "Save to local drive option" (unless you got a boatload of DVD's  )
    7) Select the external USB drive as the backup destination
    8) Look over and correct the name and comments
    9) Hit Next to start the backup
    When it's done, you have an entire copy of your Mac's HD saved to external media.
    If you need to recover your HD, just run the Recovery Wizard and reverse the process.

  • How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion?  Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

    I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7. 
    I would like to read and write in both directions from drive to drive if possible.  I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares. 
    I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:".  However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access. 
    Is the Paragon NTFS that comes with Mountain Lion limited in some way? 
    Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
    I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
    MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps.  I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
    My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
    Thank you for any guidance you can give me. 

    Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
    For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
    I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
    I would assme Paragon is limited. Try their site and knowledge base?
    MacDrive
    http://www.mediafour.com/updates/macdrive
    Paragon HFS
    http://www.paragon-software.com/home/hfs-windows/
    Paragon NTFS
    http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
    http://www.paragon-software.com/home/ntfs-mac/

  • After Boot Camp partition, iMac no longer boots

    Hi, I have a 20" iMac Core Duo (the first Intel Mac off the line) running Snow Leopard 10.6.4. I ran the Boot Camp Assistant to partition my hard drive, and it successfully created the "BOOTCAMP" drive. When it asked for my installation CD, I tried loading a Windows installation partition through a USB hard drive, but the assistant would not recognize it as an install disk. So, I closed out of the assistant early, leaving the Boot Camp partition in place. Eventually, I rebooted my machine in an attempt to boot directly from the USB drive and resume installation.
    However, I found the machine will not boot at all. It powers on normally, makes the startup sound, but after a few seconds I'm left with just a flashing folder and question mark icon. Holding down Option-key at startup does nothing. Trying to boot from my Snow Leopard disc by holding down C or D during startup does nothing. Holding down Command-S does nothing. Holding down Shift-key does nothing. Resetting the PRAM does nothing.
    What can I do? Is there some way I can access the on-board EFI to make sure the correct startup disk is selected? Why am I unable to boot from my CD drive?
    Thanks for your help, everyone.

    On OSX go to System Preferences the Startup Volume and reset your Windows 7 partition to be the default.
    On the next reboot it should automatically boot into Windows.
    A PRAM-reset http://support.apple.com/kb/HT1895 can be the cause of this behavior.
    Stefan

  • Can no longer see Boot Camp Partition

    Hello all,
    I was having problems with booting into Boot Camp/Windows 7 (I was just getting a black screen), so I attempted to delete the boot camp partition and reinstall it.  When I did that, the program hung for a while, and finally said there was an error deleting the partition.  However, it appears it like halfway deleted it, as it no longer shows up!  When I go into disk utility, Macintosh HD shows blue, and then there is a 50 GB partition (the size of my bootcamp) that is white, but it is unlabeled.  I cannot adjust the partition to make it the whole HD, and if I go to boot camp assistant, and try to make a new bootcamp partition, it bounces back with an error message as well.  I am wondering how I can restore the partition back to the original all mac hd partition..ANy help would be greatly appreciated!!
    Kevin

    WinClone 3 $20
    When you move to a new OS: clone your system, make sure you have backups you can use - for each - the partition table "rules" change with each new OS. And you want to reformat a drive from time to time especially then.
    Carbon Copy Cloner 3.4 is a good way to clone your OS X partitions.
    Basically, "start over" and restore to one HFS volume with OS X then run Boot Camp Assistant, then restore with Winclone image you made easier.
    www.apple.com/support/bootcamp
    Find CCC and WinClone www.macupdate.com

  • Boot Camp Partition & Windows Vista - Disk format Problems

    When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
    The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
    How do I get Boot camp to format the partition correctly?

    Read the instructions that come with Leopard Boot Camp. The partition is automatically formatted at FAT32. However, it's a) not bootable (Windows has to do that) and b) Vista requires NTFS. That means once you're in the Vista installer you need to REFORMAT the partition. Select the partition, and then click, umm, disk options I think. Then reformat the drive. If you do that you should be able to continue.
    100years wrote:
    When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
    The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
    How do I get Boot camp to format the partition correctly?

Maybe you are looking for