No permission to access the server app and Timemachine Backup failed

Problem:
Mac Mini Server late 2009 running OSX Server 10.6xx for years without any problem,
upgrading to Mavericks Server in Dec. 2013, running perfectly for 6 month.
No Hardware issues.
Last week i inadvertently deleted some (or most?) accounts (user and others), using the gui of the server app (and too much wine for myself).
After that i couldn’t login the app anymore, because it needs administrator rights (which were deleted).
This all caused problems by accessing some of the running services (e.g. Calendar, Adressbook, Wiki, Mail)
No matter - TimeMachine always did a fine backup job, i thought.
I restarted the machine using „command - r“, selected Recovery from TM-Backup and so on.
But after recovering and restarting the OS always hangs on reboot.
Ok - now i can do a clean install etc.
But has anyone any idea how to get back all the data of the services and the user accounts etc., using the corresponding parts of the Time Machine backup only? (Only local accounts, no network accounts/no open directory)

After reading one similar post, I've solve the problem.
It seems that I have to enable 'read and write' permission on
my site root folder.

Similar Messages

TS1424 I have downloaded a series of prison break but 3 episodes are saying "you do not have permission to access the requested resource" and "this episode can not be downloaded at this time" any idea how to fix this please??

I have downloaded a series of prison break but 3 episodes are saying "you do not have permission to access the requested resource" and "this episode can not be downloaded at this time" any idea how to fix this please??

I got this error with my iPad 3, my wife's iPhone 4, but not with my iPhone 4s.

Suddenly cannot connect to server "you do not have permission to access the server"

I am one of only two Macs in our office.
Up until now I have been able to connect to our shared folders/server just fine. Occasionally and randomly I would seem to get booted off, but would just log back in.
Now suddenly I get "Connection Failed You do not have permission to access this server".
I seem to get it whether its cifs, afp or smb.
After it denies the connection it also boots me from email. As soon as I cancel the attempt to connect the email recognizes my password again.
I have tried rebooting, repairing permissions and having our network admin change my password and nothing seems to work.
If I enter an incorrect pw it recognizes it as such. I only get the above message when I use the correct username and PW.
Additionally if I go to the other mac in our office I am able to connect using the same credentials without any problem.
This is via ethernet.

i also got the same problem on my ipad i have tried every thing i dont knw hw to fix this problme any solution. ???????????????????????????????????????????????????

Print the Server, App and Db in Excel

Is there anyway to get essbase to place the server, application, and database name on an excel sheet? I would imagine something like a function in the vba commands would be perfect. I happen to have a great deal of data spread accross a variety of servers, applications, and databases (for a variety of reasons) and it would often be helpful to know exactly the source of a given report.Any suggestions would be appreciated.

It is definitely possible using the Essbase API, but unfortunately I don't think there is a way to extract this information using only the Essbase Excel VBA Toolkit. (Someone please correct me if I'm wrong)For the API you will want to first use the VBA Toolkit function EssVGetHctxFromSheet to get the Essbase context handle. Next you will want to use EsbGetActive to return the Application and Database names. Finally you will want to use EsbGetApplicationInfo to return the Server name. Let me know if you have any further questions or have any problems using these functions,- Jay---------------------------Jay NishSenior Business Intelligence ConsultantClarity SystemsEmail: [email protected]: www.claritysystems.com---Message Posted by trainoj 3/19/02 14:22---Is there anyway to get essbase to place the server, application, and database name on an excel sheet? I would imagine something like a function in the vba commands would be perfect. I happen to have a great deal of data spread accross a variety of servers, applications, and databases (for a variety of reasons) and it would often be helpful to know exactly the source of a given report.Any suggestions would be appreciated.

I Try To Go To A Website For My FB Games And i Get A Error Message Saying 403 Forbidden I Dont Have Permission To Access The Server. It Use To Work

You don't have permission to access /frontierville-cheats.php on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request
This Is The Message I Receive When I Go To This Website

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Hello. I am only wanting to access the free apps, and it will not let me confirm my account unless I give them a creditcard

Why is it demanding a creditcard just to confirm my new account? I do not give that information to anyone. Can I bypass this?

Hello Charliedock,
The article linked below details a number of tips that can help locate the verification e-mail.
If you didn't receive your Apple ID verification or reset email
http://support.apple.com/kb/TS5404
Cheers,
Allen

Client with IP address is not allowed to access the server

While trying to connect to the SQL Database on Windows Azure via SQL Server Data Tools 2012 (from local), it gives me a message "Client with IP address 'X.X.X.X' is not allowed to access the server". And in the message it also gives you the direction
on how to fix this.
So, going back to the Windows Azure Management Portal, I have included the current IP address in to the existing firewall rule. I tried to connect to the sql database on azure via SSDT it worked properly.
Next day.. when I open the tool and trying to connect, it gave the same error, so I checked in the portal and this time it was showing different IP, then I added this IP to the firewall list, and I was able to connect.
Question: Is this a normal behaviour for adding IP each day to the firewall rule? (OR, I am using the "Free Trial" subscription, is this the issue?), or is there anything more I need to do to avoid adding the IP each day?
Please let me know.
Thank you.

Hello,
To workaround your requirement, you can try to use the New- SqlAzureFirewallRule command line in PowerShell to configure the firewall rule allow your current IP automatically.
Reference:
Update Azure DB Firewall Rules with PowerShell
http://social.msdn.microsoft.com/Forums/windowsazure/en-us/67540278-1f54-491b-9dd2-73587cf51cef/configure-allowed-ip-addresses?forum=ssdsgetstarted
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Radius, Server App, and Airport Extreme (not visible)

In the help system online it states "In the Server app sidebar, select your AirPort device. The AirPort device is listed in the Hardware section of the sidebar. If you want users to log in to your wireless network with their user account credentials, select “Allow user name and password login over Wi-Fi". Well, that is nice, but nothing I can do allows it to show up in the hardware section of the sidebar! Now I have configured it through the "Server Admin" tool, but it is kind of frustrating that all of the documentation points to the Server App and right clicking on the Airport device... Thoughts? Is there something I missed on the Airport configuration to allow it to be seen by the Server App?

Your Airport Device has to have the right configuration to show up in the server.app sidebar. Otherwhise server.app can´t manage the airport device.
Here is an support page where you can find out how the configuration has to be, if you want to manage your airport device with server.app: http://docs.info.apple.com/article.html?path=Server/10.7/en/t_ManageAirPort.html

While trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous!

Can't Access my server from the Server App

Upgraded to Lion Server, everything seemed to go OK. Now, for some reason, I can't access the settings from the Server app. It asks for a passowrd, and it won't take it. I can reboot the server, log in just fine. But entering in my username and passowrd in the Server app, no dice.
Thoughts???

Got it. This thread helped!
Thanks!
https://discussions.apple.com/thread/3193444?tstart=60

Accessing a server via the Server app from outside a router firewall

So I'm trying to access my server using the Server app on a MacBook Pro outside my server network. I can access it just fine when my client is inside the server network, but I cannot connect when outside the server network.
I've done the following troubleshooting:
- I've turned off the server Firewall option available in the server's Server Admin tool
- I've set up port forwarding on my router
- I've opened up port 311 on the router
- I've placed the server outside the router DMZ zone and the Server app connects just fine
- I've checked the box "Allow remote administration using Server" in the server's Server app Settings tab
- With the router configured correctly, the Server app cannot access the server
There's something in the router that is blocking access by the Server app. Apple Enterprise support says they are sure there is no other port to open up. Is there something else I should be doing to access the server from outside the router using a client Server app?
TIA
ps - this worked fine when I just had the server hanging directly off a cable modem.

I and I suspect a lot of other admins would argue you should not be making your server accessible via Server.app remotely due to security concerns. Saying that, I and again I suspect a lot of other admins also want/need to be able to remotely administer servers. There is a better way however to achieve this.
You should be running a VPN server, perhaps using your same Mac server. You should leave the firewall blocking access directly for Server.app but if your remote Mac first connects via the VPN it will then be connected securely to your internal network and then be able to use Server.app

My iPhone 4 has been saying You do not have permission to access the requested resource whenever I try to watch one of the episodes I bought from iTunes. It will not let me watch them and I don't know why.

A few days ago I bought a season of the series Psych off of iTunes. I was able to watch the first bunch without a problem but now all of a sudden when I try to watch one it says "You do not have permission to access the requested resource". I tried restarting my phone but that do not help. I cleared up a lot of space on my phone as well. I have and iPhone 4 with the update of iOS 6.1.3.

Are you using the same Apple ID that the purchase was linked to? I had this issue with a shared device, and the other person had logged out of my ID and logged in with hers.
If it's the same ID, then try redownloading the purchase.

I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

Yes- it is a Mac. I went through adobes system requirements and re- downloaded supportive software. The notice seems to happen near the end of the down load with the messages above. I'll look into your suggestion. Thank you- appreciated.

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc

No permission to access the server app and Timemachine Backup failed

Similar Messages

Maybe you are looking for