No permission to create an appt. in standalone Outlook 2013

Hello!
I am struggling with the .ost / ,pst thing when trying to migrate from Outlook 2010 to 2013.
I installed Outlook 2013 on a standalone computer (no network/servers etc) and when I migrated calendar items from my Outlook 2010 on another computer, they went into the "Calendar" folder so I could see all future and historical meetings.
In doing that a second "Calendar (this computer only)" folder was created. This folder is where new meeting requests via email are being routed (they do not show in the "Calendar" view. I would be fine with this (use Calendar
for old mtg's (archive) and use the Calendar (this computer only) for all current and future meetings except that it is saying I don't have permissions to create appt's in this folder (although I do in the "Calendar" folder.
So now the only way to create a appt. is to email myself from another computer so it shows up in my proper calendar. I just installed a few days ago and have worked through the email folder (this computer only) issue but this one has me. I want
to reconcile before I connect other devices (phone) as I suspect the path will not connect to the correct calendar either.
Please advise with steps to remedy or point to online resources.
Thanks!

I recommend that you post this in the Outlook Forum: http://social.technet.microsoft.com/Forums/en-US/outlook/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

No "Show a Room List" dropdown, when creating a new meeting in outlook 2013

In Outlook 2013, user clicks "New Meeting" on the right you have the Room Finder. It shows the calendar, below that the Good, Fair and Poor labels, then below that you have the drop down box "Show a room list"
For one user there is no "Show a room list" no dropdown box at all just a grey space. They can see everything else like normal, the labels and the choose an available room...however no "Show a room list" to be able to pick one.
*Requesting a screen shot from user
Thanks,
Will

Hi Will,
If the issue only happens to one user, please check whether the issue happens in Outlook Online mode. If the issue doesn’t happen in Online mode, please create a new Outlook Profile to check whether the issue persists.
If the issue persists in Online mode, please setup this problematic user’s account in another worked Outlook client machine, then check whether the issue can be reproduced.
Please start your problematic Outlook client in safe mode to have a try.
Regards,
Winnie Liang
TechNet Community Support

I can't create an email account in Outlook 2013 for my exchange server

Have tried many things on this issue.
I have a new tablet PC running Windows 8. I am able to connect to my Exchange Server account using Windows 8 Mail, no problem but when I have tried to set up an account for Outlook 2013 to connect to the same Exchange Server using exactly the same login
information I cannot get it to connect. I simply get the message that the Exchange Server is unavailable.
I've been able to connect a variety of other devices to the same Exchange Server account without any problem - iPhones, Windows Phone, iPads, etc, etc all without problem. It's just this device and Outlook 2013 seems to be the issue. From checking various
forums seems this is not an isolated issue but I've not been able to find a useful solution so far. Have deleted the user profiles and .ost files, switched off caching etc, all to no avail.
One key difference between the account information required by Windows Mail and Outlook is that in the Windows Mail system I am prompted to enter my domain information. I know this is critical from the information provided to me by our network administration
team but there is nowhere in the Outlook account setup process where I can enter my domain info.
Closest I've been able to get to success is to use the manual account creation process and select the Exchange ActiveSync option - this gets me to the point where I'm prompted for my username and password info but it fails at this step because I am connected
to a local domain (the domain account for the PC) and my user name and password are not accepted. There is nowhere in this login process that I can find where I can enter the correct domain info.
Any ideas on a solution would be very much appreciated - I use Outlook extensively in my work and whilst the Windows 8 Mail system is good, it doesn't have the level of functionality I need.
Many thanks
Wayne.

Have managed to solve this with your help Martina regarding using the domain\username combination.
Here's the solution in detail in case anyone else is having similar problems.
From control panels - select the User Accounts and Family Safety item, then the Mail (Microsoft Outlook 2013) item and then the Email Accounts option.
Select the Email tab and click 'New... button to create a new email account
Choose the standard Email account option in the following form. (Not the 'Manual' option'
Enter your Exchange account details - no alterations necessary here. just your standard details.
As the account verification proceeds you are prompted to again enter your username and password details. In this form, instead of using the top option with your username already populated, click the lower 'Other user' option and enter your domain\username
details. This changes the domain. Enter your password as usual.
I was prompted to do this twice - same each time. Enter domain\username in the username field and usual password
Account is then created.
Open Outlook to complete the process and synchronise data with Exchange.
Hope this is helpful to others - again, many thanks for your assistance Martina.
Wayne.

Creating PDFs from emails in Outlook 2013?

Hello-
Used to be able to compile emails into a single pdf document... I have updated my Adobe Acrobat, but that action isn't available in Outlook anymore (used to simply select the emails, right click and would be prompted to create as PDF)... am I missing something, or is this something in a pending update (if so, when?)
Thanks
Colin

I suspect your Acrobat is not compatible with OFFICE 2013 for the use of PDF Maker. In fact, I do not know if any Acrobat is certified yet. In any case, you have not mentioned your version of AA and that is likely the problem. Your only choice is likely to print the e-mails to the Adobe PDF printer. Whether that can be done with Outlook 2013 is something you will have to check.

Permission to create file in directory

Hi all,
I want to check permission in directory. ie. if user have permission to create a file in directory.
how can i check this.
for testing i wrote this program and i disabled all permissions for user (like read, write ) from security tab of directory properties.
so i was not able to open the directory
but it seems that canRead and canWrite are not working
public class Check {
      * @param args
     public static void main(String[] args) {
          File s = new File("c:/testing/thisdir");
          if (s.exists() && s.isDirectory()) {
               System.out.println("exists");
               if(s.canRead()&& s.canWrite()){
                    System.out.println("read n write possible");
               }else{
                    System.out.println("read n write impossible");
          } else {
               System.out.println("does not exists");
Output :
exists
read n write possibleAny comments why its so...

hi dcminter ,
just now changed the code ... and rechecked the permissions also ... and found that program is unable to write file inside directory...it throws following exception "java.io.IOException: Access is denied"
but still
canRead and canWrite method returns true ... i dont know why it is so
public class Check {
      * @param args
     public static void main(String[] args) {
          try {
               File s = new File("c:/testing/thisdir");
               if (s.exists() && s.isDirectory()) {
                    System.out.println("exists");
                    if (s.canRead() && s.canWrite()) {
                         System.out.println("read n write possible");
                    } else {
                         System.out.println("read n write impossible");
                    File ss = new File("c:/testing/thisdir/a.txt");
                    ss.createNewFile();
               } else {
                    System.out.println("does not exists");
          } catch (FileNotFoundException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
}

Don't Have Permission to Create Nodes

I'm working with the File example and I'm getting the
following error:
Error: MessageManager.createNode : insufficient permissions
to create node
I'm creating the node on a SYNCHRONIZATION_CHANGE event as
follows:
I've got the room set up so that guests are automatically
promoted. Does that not work as far as Node-creating permission?

Hi Ryan,
You can create a new node only if you are owner of the room
or you are promoted to have host role i.e. role = 100 . When you
autopromote someone, that user gets promoted to a role = 50 i.e. a
presenter role. If you do not autopromote , the default role = 10 ,
i.e. that of a viewer.
Hence you need to promote the incoming user further to a role
= 100, merely autopromote won't give him enough permission to
create a new node.
Thanks
Hironmay Basu

Permission to create keywords?

Permission to create keywords?
Hi. We're currently on 2006.0.6. I'm trying to give a user access to create and manage keywords without giving them complete administrative access to RC. I tried adding the user to the group "Manage and organize portal categories and keywords". They can now browse and update existing keywords, but the option to create a new keyword isn't available for them. Is there a way to let a user create new keywords without giving them complete admin access to RC?

Tylor,
Yes - you can accomplish this in RC06 by also giving this person the "Change Site Parameters" site permission. This, along with the "Access ServiceDesigner" and "Manage and organize portal categories and keywords" site permissions will allow them to create keywords. Because you are not giving them access to ServiceCommunity, the "Change Site Parameters" site permission is limited only to actions taken with ServiceDesigner.

Project Server 2013 - User does not have permission to create a WSS site

We have Auto-Publish enabled for the project by the Owner. The issue is that when a user submits his updates, the updates are auto approved and auto-published but it also ends up showing below error to the user.
General
•User does not have permission to create a WSS site.:
◦GeneralSecurityAccessDenied (20010). Details: id='20010' name='GeneralSecurityAccessDenied' uid='---'.
•Queue:
◦GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='---' JobUID='---' ComputerName='---' GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='54a0c79c-da9b-c011-2554-5fb474e440c6'.
For more details, check the ULS logs on machine --- for entries with JobUID ---.
And in the Project Queue, the failed job type and job state are
Job type- Project Site Update
Job State - Failed But Not Blocking Correlation
We have disabled Site Provisioning for Project publish.
Can anyone point us on how auto-publish works and what all permission is required by users or owners?

Hi Goahh,
It might be that your issue has nothing to do with the rules set to auto-publish the project. Try to inactivate the auto-publish for a test project and try if the publication by itself works. Or simply try to publish a project from MS Project Pro and see
if you still get the error message.
Has it been working before?
Check also that the "Manage SharePoint Foundation" permission is enabled for the security groups in question.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Grant permission to "Create Database" Only

I want to create a user in SQL,
user just need a permission to create a new database nothing else,
how can i accomplish this?
Regards
k

use [master]
GO
GRANT CREATE ANY DATABASE TO [LoginName]
GO
-Prashanth

If I create and publish a standalone iPad app using DPS will it work on the iPhone 4?

If I create and publish a standalone iPad app using DPS will it work on the iPhone 4?

No.
Bob

OUTLOOK 2013 permission shared calendar Free/Busy doesn't work for some the users Exchange 2010 and Exchange 2003 that use outlook 2007/2010

Hello,
We are in coexitence organisation (transition Migration) Exchange 2003 sp2 and Exchange 2010 sp1.
Users in Exchange 2003 use outlook 2007 and outlook 2010
Users in Exchange 2010 use outlook 2007, outlook 2010 and outlook 2013.
Issue: users in Exchange 2003 can't open outlook 2013 user calendar when he has Busy/Free information as default permission in his calendar.
User in Exchange 2010 with outlook 2007 can't also open outlook 2013 user calendar when he has Busy/Free information as default permission in his calendar.
Is it normal ? or exist some configurations to do in order to coexist all thoses clients and servers ?
Thanks in advance

Hi,
Does this issue occur on Outlook only or both Outlook and OWA?
Since you have double checked the permissions via multiple methods, it seems there is nothing problem on permission. Please make sure the migration from Exchange 2003 server completed successfully.
If in OWA everything goes well (cannot see details), it should be an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest re-create profile to refresh the caches.
Thanks
Mavis
Mavis Huang
TechNet Community Support

In outlook 2013 a folder is getting created automatically & New emails are directly going to this folder

Hi, The scenario is as follows
1. A user has wierd problem where in outlook 2013, a folder named "Junk" is created & all emails are going to that folder
2. This Junk is not the regular "Junk E-Mail" folder & it is different.
3. There is "Inbox" folder as well in the outlook
4. There are no Rules in outlook
5. I am able to delete the "Junk" folder, but again after closing & opening the outlook the folder gets automatically created.
What could be wrong here :(
Manju Gowda

Hi,
Which type of email account are you using? Do you have the email account sync to any mobile device? If so, please check the junk email option on the mobile device. You can also try to disable the sync in the mobile device and then check the issue again.
Please let me know the result.
Also see a similar issue discussed here:
http://social.technet.microsoft.com/Forums/office/en-US/d00cab48-d386-4e84-b4c2-d872d77bd26e/outlook-creates-extra-folder-called-junk-in-mailbox?forum=outlook
Thanks,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

Meetings created on Q10 do not sync to Outlook 2013 calendar

Am using a Shaw email account on Outlook 2013. Just got the Q10 and cannot seem to sync. It syncs from Outlook to the phone but not from the phone to Outlook.
BB Link ver 1.2.0.28
Office Professional 2013
BB Link does not throw and error messages and shows up as successful sync.
Is it possible that the phone is not able to write to the Outlook pst file. But I would have imagined that it would throw an error message is what is confusing me.
Has anyone else had this issue or something similar?
There is an update for the phone but I did not apply it. I didn't want to mess it up further.
The user was using a BB torch before and we moved him to the q10. He was having somewhat of a similar issue just that he would get meeting reminders but Outlook would not display them in the calendar. Now the q10 will not even send any of the calendar appointments to Outlook.
Thanks for the help. If anyone can offer any suggestions

LarryMcJ -
I read your first post and checked all the items you pointed out. I was already set up in the way you described but alas my problem remained. I appreciated the suggestions and checked them carefully but it had no effect on my problem.
I found it interesting that I could change an item on the BB (no matter where it was created) and the change would propagate over to iCal but a new item created on the BB would not come over. I also tried using the click box to overwrite the BB from iCal but items created on my BB were completely unaffected by the sync.
I had no calendars tied to the BB email addy. I did find that my calendars were somehow linked to various (random?) email addresses (I use 5). Things have started working better since I changed all the calendars to tie to one email addy. I was able to get Google sync to work without a hitch after about an hour of playing with it and there have been no problems since. Maybe RIM should try to hire some Google developers away ;-)
Anyway - the headache and frustration were just not worth it. There may be a way to get my setup to work with DTM but, honestly, I don't have the time, patience or the hair left to pull out. I am no longer trying to find a solution - I have moved on.

Contact Item created in Office 365 website opened in Outlook 2013

Hello,
Is it possible to open a "Contact Card" created via web in Office 365 OWA, on your locally installed Outlook 2013 using its unique "Contact.EntryId"?
I have Delphi application which connects to outlook via COM/OLE. My goal is to retreive the ContactItem using OutlookNamespace.GetItemFromId(EntryId, StoreEntryId) and display in outlook 2013. However, retrieving the item results in
an error. I noticed that Contact.StoreEntryId (retrieved via Exchange Webservices Managed API) seems to null.
Is there anyone who
has any experience with this?
Erwin

Is it possible to open a "Contact Card" created via web in Office 365 OWA, on your locally installed Outlook 2013 using its unique "Contact.EntryId"?
Basically my question is:
1. Is there an unique Contact identifier in Office365, which I can refer to when synchronized with Outlook2013?
2. Can I use this identifier to open/display the contact in Outlook2013
I have Delphi application which connects to outlook via COM/OLE. My goal is to retreive the ContactItem using OutlookNamespace.GetItemFromId(EntryId, StoreEntryId) and display in outlook 2013. However, retrieving the item results in
an error. I noticed that Contact.StoreEntryId (retrieved via Exchange Webservices Managed API) returns null.
Is there anyone who
has any experience with this?
Erwin

No permission to create an appt. in standalone Outlook 2013

Similar Messages

Maybe you are looking for