No personal config file

I'm trying to delete my personal config file for Dreamweaver CS3 in Windows 7. I followed the instructions and found the personal config file, but there is no cache file as described. What does this mean?

Which instructions are you following?
http://forums.adobe.com/thread/494812
"Earlier versions of Dreamweaver locate the personal configuration folder in a slightly different location. This is where it can be found in Dreamweaver CS3:
Vista/Windows 7: C:\Users\<username>\AppData\Roaming\Adobe\Dreamweaver 9\Configuration"

Similar Messages

  • SQL Agent Job failing - not using credentials in the config file for Data source

    Hi
    We have an SSIS pkg, that is secheduled as SQL Agent job using proxy account. The pkg contanins data source for connecting different SQL servers and the proxy account do not have access to the external DBs. The data source credentials are stored in the Config
    file.
    Why the job is not using the credentials in the config file and try to use the proxy account and failing.
    Do the proxy account need access to all the external dbs in the pkg, and then what is the purpose of the config file.
    I am sorry, i am not SSIS person trying to understand. If any one can explain tha will be great!!
    Thank you!
    VR

    Please take a look at these URLs:
    Schedule a Package by using SQL Server Agent
    SSIS package does not run when called from a SQL Server Agent job step
    Cheers,
    Saeid Hasani
    Database Consultant
    Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
    [My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
    [Twitter] [Facebook] [Email]

  • Is it possible to create a cisco config file based on a polycom config file?

    Hello,
    We have 12 spa509g phones that are barely working with our provider (voxox).
    My provider gave me the config files that are used to set up polycom phones as those are the only phones they support.
    Features that currently work: incoming calls, outgoing calls, blind transfer, voicemail, call hold
    Features that do not work: call presence - solid orange lights, attended transfer, paging 
    I've upgraded the firmware to 7.5.6 and configured the phone through the GUI as much as i can but I can't seem to enable the above features.
    Any help would be highly appreciated as I'm about to buy polycom phones if we can't figure the configuration out.
    Attached are the configuration files from voxox concerning polycom phones. confidential data says "removed"
    If anyone thinks that this is possible, I can send a copy of my current cisco configuration file. 
    Thanks,
    Philip

    Well, I have no polycom phone, not I have personal experience with voxox. I wish the following document may help a lot - it describe Polycom configuration somewhat. As you have no Polycom, you have no current <mac>-directory.xml. So you don't know the device name you should subscribe to. But it seems to be a DID-number.
    Just try it.
    On the other side, ask Voxox for help. Don't ask for configuration files, ask for configuration instructions expressed in terms of the SIP protocols. Consider switch to more friendly and technically skilled VoIP operator if they will not understand what the SIP stand for ...
    By the way, wrong forum. Your issue has nothing to do with XML Phone Application interface. I'm not sure someone will respond you here.

  • Loading UI components from config file

    Hi,
    I wanted to know your opinion about a project that i'm working on.
    The inicial idea of the project is to have a config file (file.ini) with a syntax similar to this one:
    [Component1]
    type = sevenseg
    width = 200
    height = 50
    numberOfDigits = 5
    foregroundColor = green
    backgroundColor = grey
    [Component2]
    type = button
    width = 50
    height = 20
    command = GETLED 3
    [Window]
    width = 500
    height = 300The application needs to read the file when it starts and after that, it needs to build the interface based in the config file. I think this is the easy part.
    The most difficult part is that i also want the application polling a webserver for data in order to refresh the values displayed in the components and also, when there is some input action (clicking a button, changing a slider, etc) i want to send it to the server.
    The problem is that I'm not imagining a way of linking the various components that will be in the UI while using this config file.
    Do you have any ideas or do you think this can be done?
    The purpose of reading the "UI" from the config file was to reduce the writing of code, since this application will be used by people with little skills in programming.
    And in the future, it could be possible of creating an application to create all the UIs needed in a way similar to netbeans and swing based UI.
    Thanks for your attention.
    João Gonçalves
    PS: If this isn't possible, I'm also considering the possibility of creating a netbeans plugin to design the UI. Here I don't avoid the coding problem, but i can reduce it a bit.

    Well, I'm going to try to explain it a bit better.
    The application that i'm going to do is the interface and it's going to be done in javafx, (obviously).
    The application will be the user interface of a remote device that will be located somewhere in a LAN. The webserver is located in the middle, between the client (UI) and the device, and is the webserver that it's going to make the bridge between the client and the device.
    The architecture will be something like this:
    Client <------> WebServer <------> device
    The idea of the project is to make it possible to use a large number of devices, all different. So the UI that is going to control each device will need to be customized in order to look similar to the control panel of the device and to permit the user to interact with this one like if he was in front of it.
    The reason of my question is because it was asked to me if it was possible to create a config file and load the UI components and layout from the file, to avoid dealing with the code, since the persons who are going to configure the devices are not software developers and don't know too much about java and programming.
    This is why i made this post, to know the opinion of people more experienced than I in programming, and above all, in javafx.

  • Change the kernel26 config file for ati users?

    Hi,
    To get the  propriatary ati drivers working you need to change some parts of the kernel from build in to module. What about changing this in the standard kernel26 so that this will make it easyer to install ati drivers (and update the kernel) for a lot of users. I think it isn't hard to change because the config file is kernel26 package.
    I don't know much about kernels and stuff so I don't know if it will be negative for some users? Else of course it shouldn't be changed because only a small percentage of arch users use propiatary ati drivers.
    Please give me your opinion about this
    David
    edit: typo

    I don't think that Xentac wrote that, in this thread qwerty wrote it, or is this the same person?
    In that thread is also the reason why they need to be modules, the propriatary ati drivers interact with the AGP modules from the kernel. For some reason this doesn't work when they are compiled in the kernel. Shall I send qwerty a message if he can explain better why modules are needed?
    Also I'm trying(never made a PKGBUILD...) to merge the two PKGBUILDS from that howto in one so that in the future to install ati drivers one can just type pacman -S ati-drivers, add the module to rc.conf and change xorg.conf to get it working, that should be really cool I think
    edit: I just found out this isn't needed since I found ati packages in link's reposatority! The only strange thing is that they depend on an older kernel

  • TDMS & Config Files Comparison

    Hello,
    I'm not really new to the community since I had many queries that have already been asked before and I found an answer here, until now. I've been studying up on TDMS (File>Group>Channel) and its conceptual heirarchy seems to be very similar to Config Files (File>Section>Key). Now, I think it's possible to use the TDMS template for config files as well aside from measurement results but I thought I should ask...
    What are the advantages and disadvantages of TDMS vs Config (*.ini) Files?
    I haven't found any form of comparison between the two so far. I would personally excempt the Notepad accessibility of the Config File as an advantage since it would be better to limit the access to the system settings from non-authorized users.
    Solved!
    Go to Solution.

    For your addon question - this is why it's important to have proper error handling and a proper shutdown routine in your application.
    If you have any LabVIEW errors in your application you should handle these properly and if it's deemed to be an unrecoverable error then you tell your application to exit.
    You should handle your application being closed correctly to make sure that whenever possible you shut down gracefully and close all of your references (e.g. hardware, file references etc.) before your application exits. There's some good information about that on a recent thread here: http://forums.ni.com/t5/LabVIEW/Best-Practices-for-Gracefull-Application-exit-close/m-p/3094973#M885...
    Of course, there is always the possibility that you might get a fatal application crash or you might have a power cut or something - in that case you could periodically flush the TDMS buffer but there is also OS and disk-level caching to consider. 
    If you look at the Advanced TDMS VIs - you can disable buffering and according to the help "buffering does not occur at any layer".
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • Linux kernel config file for suspend to ram

      Hi all
    To anyone who has suspend to ram working on there lenovo can you send me a copy of your kernel config file.
    My suspend to ram instead of going to sleep, it just makes the moon led blink and turns off the pc. I am using the 2.6.27.4 kernel with the new libata driver,  I just want to try  a reference kernel config that is know to work,
    thanks

    prysm, welcome to the forum,
    which Lenovo 3000 system do you have? Posting the Type and Model number will help members help you.
    Moved from Lenovo 3000 Notebooks board to Linux board
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • ISE 1.2 and maximum PSNs supported in my Persona config

    Hello folks,  I am putting together a medium to large distributed ISE deployment and wondered if anybody could tell me what the maximum number of PSNs are allowed under this configuration.   I was reading thru an older training document with version 1.1 and it suggested only 5, which is why I am wondering if the specs changed on 1.2 but I cannot find them anywhere handy.
    I have a large VM running the PRIMARY admin persona which also is secondary for my reporting & monitoring in my main data center.
    In another state (connected with 10G) is another large VM acting as my secondary admin persona with primary monitoring & reporting.
    Across multiple states I want to have multiple PSNs across the geographical layouts of each state but I am not sure if I can scale enough PSNs with my current version of 1.2 and my persona config listed above.    I have a need for about 12 to 15 PSNs.
    Wondering if I need two more VMs to break out my monitoring as one node in DC1 and secondary monitoring in DC2 in order to get more PSN scalability.
    Any help would be greatly appreciated.
    -Thanks

    As Marvin suggested, I would look into using 1.3 at this point unless you have some specific concerns with that version and really want to stay with 1.2. With that being said, here are my recommendations/comments:
    - Both v1.2 and v1.3 can actually scale up to 40 PSN nodes
    - If any of your PSN nodes are going to be placed in the same location and are layer 2 adjacent I would recommend putting them in a node group and behind a load balancer. If you don't have a load balancer, I would still put them in a node group. At the moment a node group can have up to 10 PSNs
    - If you are going to have 10-15 PSN nodes then you should dedicate 2 nodes for specifically for the monitoring persona
    - The maximum roundtrip delay between any nodes cannot exceed 200ms
    For more info you can always reference the "Network Deployment" section in the hardware installation guide for ISE:
    v1.3
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/installation_guide/b_ise_InstallationGuide13/b_ise_InstallationGuide12_chapter_00.html
    v1.2
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_deploy.html
    Thank you for rating helpful posts!

  • "Unable to open config file" Error when starting tomcat

    hi all,
    Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
    From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
    1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
    2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
    Content of 'catalina.out'
    Unable to open config file
    Starting service Tomcat-Standalone
    Apache Tomcat/4.0.4
    Unable to open config file
    Starting service Tomcat-Apache
    Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
    2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
    2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
    2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
    2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
    2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
    2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
    2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
    2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

    I have all those files too.
    I think the 'config file' mentioned in the error log is the mod_jk.conf.
    On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

  • Jabber for windows 9.2.1 - InitialPhoneSelection doesn't work if configuration is in custom config file

    Hi,
    my customer wanted set InitialPhoneSelection to deskphone mode, when users firs run Jabber for Windows (ver. 9.2.1).
    I created custom config (configurationfile=jabber-config-deskphone.xml) but it doesn't work.
    Policies>
         <InitialPhoneSelection>deskphone</InitialPhoneSelection>
    </Policies>
    I tested it couple times and at the end I tried put configuration to default jabber-config.xml and ... this functionality start working...
    Could you check guys if you have same problem with custom config file? I think that it is bug. Maybe other option don't work in custom config file.
    Thanks a lot
    Pavel

    Hi Pavel,
    This setting is only when the client is installed and started by the user for the first time. After that the client will save the user preference (what was the phone selection when the user exited the client)  and use it in subsequent logins.
    Having said that, can you please specify in details how exactly you did your tests or maybe test again taking the above into consideration ?
    Thanks,
    Christos

  • HttpBinding not working when HttpHandler tag is present in web.config file

    Hi,
    I tried to add a WCF service in WCF Test Client using HttpBinding. But I couldn't add the service. I got the below error.
    There was an error downloading 'http://localhost/Services/PostOffice.svc/_vti_bin/ListData.svc/$metadata'.
    The request failed with an empty response.
    Metadata contains a reference that cannot be resolved: 'http://localhost/Services/PostOffice.svc'.
    The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error.
    If the service is defined in the current solution, try building the solution and adding the service reference again.
    I removed the below code in the Web.Config, later I was able to add the WCF service to the WCF test client.
    <httpHandlers>
    <add type="System.ServiceModel.Activation.HttpHandler, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" path="Telerik.ReportViewer.axd" verb="*" validate="true" />
    </httpHandlers>
    I'm not sure with the above code. Could you please let me what is the reason behind it and what is the use of above code and if I remove it how does it affect my application.
    Thanks in advance.
    Sandeep

    Hi Sandeep Pinniti,
    Please try to add the following config in your config file:
    <system.webServer>
    <validation validateIntegratedModeConfiguration="false"/>
    The validateIntegratedModeConfiguration="false" will allow us to keep our httpHandlers section populated without throwing an error. And I have tested in my side,
    it works fine.
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Changing the Crystal Report dependency from 10.2 to 11.5 using config file

    Hi,
    We have an windows application in .net 2.0, which refers to Crystal Report 10.2 version. Now the dependency was being upgraded to 11.5. But we do not have the exact source code for the executable to change the dependency from 10.2 to 11.5.
    I have installed the CR 11.5 to the testing machine and tried to open the appilcation. it failed saying CR 10.2 dlls were missing
    Then  I changed the .net config files to change the dependency assembly as follows
    <runtime>
         <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
           <dependentAssembly>
             <assemblyIdentity name="CrystalDecisions.CrystalReports.Engine" publicKeyToken="692fbea5521e1304" culture="neutral" />
             <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
           </dependentAssembly>
           <dependentAssembly>
             <assemblyIdentity name="CrystalDecisions.ReportSource" publicKeyToken="692fbea5521e1304" culture="neutral" />
          <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
           </dependentAssembly>
           <dependentAssembly>
             <assemblyIdentity name="CrystalDecisions.Shared" publicKeyToken="692fbea5521e1304" culture="neutral" />
          <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
           </dependentAssembly>
           <dependentAssembly>
             <assemblyIdentity name="CrystalDecisions.Windows.Forms" publicKeyToken="692fbea5521e1304" culture="neutral" />
          <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
           </dependentAssembly>
          </assemblyBinding>
      </runtime>
    Now the application launched with out any issues. I thought the problem was sorted out.
    But when I tried to generate the report, there comes the problem
    During the report generation, I am getting the following error
    Crystal Reports
    An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required.  Please go to http://www.businessobjects.com/support for more information.
    OK  
    I do not want to install the 10.2 redistributable in teh machine also do not want to re-compile the sources changing the dependency
    Is there any way to achieve this ?
    Any help is much appreciated.
    Thanks
    Edited by: Balaji Narasimhan on Aug 3, 2009 5:28 PM

    No way that I know of. I believe once you change the dependency, you will have to recompile the project. Installing CR 10.2, may get this to work, but the app will most likely use the 10.2 references. Let's see if anyone else has any ideas.
    Ludek

  • XML file in the form of .config file how to convert it to class and store it in single object

    Hi,
    I have a config file in which i have to convert it to class and get an object.
    example:
    <?xml version="1.0" encoding="utf-8" ?>
    <xyz xmlns="">
      <Container name ="Basic">
        <Connectivity user="" server="" protocol="udp"/>
        <Connectivity user="" server="" protocol="udp"/>
      </Container>
      <Container name ="Cp">
        <settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
          <domain name="audio">
            <section name="headset">
              <setting name="audio_in_agc_enabled " value="1"/>
            </section>
            <section name="incoming">
              <setting name="use_agc" value="1"/>
            </section>
            <section name="vad">
            </section>
          </domain>
          <domain name="system">
            <section name="qos">
              <setting name="audio" value="tos 46"/>
            </section>
            <section name="dtmf">
              <setting name="force_send_in_band" value="0"/>
              <setting name="minimum_rfc2833_play_time" value="40"/>
            </section>
            <section name="network">
              <setting name="dtx_enabled" value="0"/>
            </section>
            <section name="diagnostics">
              <setting name="enable_logging" value="1"/>
              <setting name="log_level" value="Error"/>
            </section>
            <section name="general">
              <setting name="add_OS_version_to_user_agent_header" value="1"/>
            </section>
            <section name="indialog_notify">
              <setting name="enable_indialognotify" value="1"/>
            </section>
          </domain>
          <domain name="rtp">
            <section name="2833">
              <setting name="enabled" value="1"/>
              <setting name="packet_time_in_ms" value="60"/>
              <setting name="payload_number" value="101"/>
            </section>
            <section name="inactivity">
              <setting name="timer_enabled" value="0"/>
            </section>
          </domain>
          <domain name="proxies">
            <section name="proxy0">
            </section>
            <section name="proxy1">
            </section>
          </domain>
          <domain name="ggg">
            <section name="device">
              <setting name="use_headset" value="1"/>
              <setting name="rrr" value="1"/>
              <setting name="eee" value="480"/>
              <setting name="eme" value="hhh"/>
              <setting name="headset_name" value="vvv"/>
              <setting name="manual_audio_devices_configure" value="0"/>
              <setting name="audio_in_device" value=""/>
              <setting name="audio_out_device" value=""/>
              <setting name="ringer_device" value=""/>
            </section>
            <section name="system">
              <setting name="export_settings" value="EndpointSettings.xml"/>
              <setting name="enable_export_settings" value="0"/>
              <setting name="log_level_AbstractPhone" value="0"/>
              <setting name="log_level_Audio" value="0"/>
              <setting name="log_level_Auto Configuration" value="0"/>
              <setting name="log_level_CCM" value="0"/>
              <setting name="log_level_Conferencing" value="0"/>
              <setting name="log_level_Contacts" value="0"/>
              <setting name="log_level_DNS" value="0"/>
              <setting name="log_level_GUI" value="0"/>
              <setting name="log_level_Jitter" value="0"/>
              <setting name="log_level_Licensing" value="0"/>
              <setting name="log_level_Media" value="0"/>
              <setting name="log_level_Privacy" value="0"/>
              <setting name="log_level_RTP" value="0"/>
              <setting name="log_level_STUN" value="0"/>
              <setting name="log_level_Security" value="0"/>
              <setting name="log_level_Storage" value="0"/>
              <setting name="log_level_Transport" value="0"/>
              <setting name="log_level_USB Devices" value="Info"/>
              <setting name="log_level_Utilities" value="0"/>
              <setting name="log_level_Video" value="0"/>
              <setting name="log_level_Voice Quality" value="0"/>
              <setting name="log_level_XMPP" value="0"/>
              <setting name="log_level_Endpoint" value="6"/>
            </section>
            <section name="beeptone">
              <setting name="play_locally" value="0"/>
              <setting name="enable_beeptone" value="1"/>
              <setting name="beeptone_file" value="beep.wav"/>
              <setting name="beeptone_timeout" value="30000"/>
            </section>
            <section name="dtmf">
              <setting name="play_locally" value="1"/>
              <setting name="pause_start_stop_dtmf" value="100"/>
            </section>
            <section name="control">
              <setting name="auto_answer" value="0"/>
            </section>
            <section name="ctrol">
              <setting name="auto_ans" value="0"/>
            </section>
          </domain>
        </settings>
      </Container>
    </xyz>
    Please help me out in creating an object from it.
    Thanks,
    Hiranmayee

    It's one of those things you usually start from the other end.
    IE with a class and then serialise / deserialize to xml.
    Because you have a namespace in there:
    <settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
    I think you will find linq to xml will have issues with that.
    You could still use xpath to pick data out of there and there's been a thread on the c# forum recently which is relevent:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2dc0581e-f2fd-4fd3-89ee-e59280c398e6/read-xml?forum=csharpgeneral
    Why do you want to turn that into an object?
    By the way.
    This isn't a wpf question and you should probably have posted it on the c# forum.
    Hope that helps.
    Recent Technet articles: Property List Editing;
    Dynamic XAML

  • Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

    Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

    Hi Jay,
    SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
    SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
    once on each server, and then the variable can be used by all the packages on this server.
    Regards,
    Mike Yin
    TechNet Community Support

  • How can I use my log4j config file of my web project in ias?

    I used log4j in my web project. So I put a config file "log4j.properties" in my project WEB-INF/classes/.
    It works well in tomcat. But when I deploy it to ias parent by orabpel project, It didn't work know!
    I can only see my log in "$ORACLE_HOME/opmn/logs", and some message I nedd is losed, such as the class name, line,datetime, Thread and so on.
    I think the config file of my project is't work, maybe log4j use some config file of ias but me.thx
    So where is the log4j config file of ias, can i modify it ?
    Or how can I let my project use my config file not ias? Any one can help me, thx!

    If you are wondering if/how to control the log messages coming from bpel, here is the corresponding log4j config file that it uses:
    $ORACLE_HOME/bpel/domains/<DOMAIN_NAME>/config/log4j-config.xml

Maybe you are looking for