No picture, false AVI? How to convert?

Hi,
I do not get a picture, only tone. Is it als false AVI? How can I convert my AVI to work with it in elements?
Thanks!
anika

AVIs can be made up of any of thousands of codecs.
Open your AVI in the free download G Spot or Media Info.
http://www.headbands.com/gspot/
Note this file's resolution, frame rate and, above all, its audio and video codecs.

Similar Messages

Can't open some .AVI - How to convert .AVI to .MOV?

Hello
I've got a bunch of AVI clips that I need to convert to .MOV for film scoring purposes in Digital Performer 5.
QTPro won't open these AVIs, how can I still convert them to MOV? Is there any way?
Thanks
Chris

Thanks so much for the great advice, I downloaded mpeg streamclip and I have been playing around with converting my video.
There are many different options and I have tried a few but the quality of the picture is slightly pixelated. Can you advise me about the best option to use to get the best quality picture.
I want to be able to edit it in imovie, so I was exporting it to quicktime but there are many other options which would you recommend?
When I exported it to quicktime I tried the following options
I have tried compression -
Apple motion jpeg A
png - sound played but picture was frozen and didn't play
Tiff - same thing as png
but there is an endless list and I'm not sure what it all means.
There are also many different frame sizes, I use (4:3) in imovie but it also had a 320 x 240 unscaled I'm not sure what this means?
Are there any other options/boxes I should be altering/checking?
Sorry for asking so many questions.
I'm not really very familiar with all these terms, it's a completely new language to me.
Any advice would be really appreciated
Thanks again for helping me out : )

How to convert Mod/Tod video to AVI/MPG/WMV/MPEG

question:
1: What is .Mod and .Tod video?
2: How to convert .Mod and .Tod video to AVI, MPG, WMV, MPEG?
Answer:
1: .Mod and .Tod videos are mainly produced by digital harddisk camcorder such as JVC camcorder and so on. It is not common video formats and can only be played on some special players.
2: Now there is one professional Mod Converter that can convert .Mod and .Tod video to AVI, MPG, WMV, MPEG now. Aiseesoft Mod Video Converter has super conversion speed and excellent image/sound quality.
The following is a step-by-step guide on how to handle the conversion.
Step 0: Install and run Aiseesoft Mod Video Converter.
Step 1: Add files
Click “Add File” to add your video files.
Step 2: Set output video format
Click “Profile” button from the drop-down list to select the output video format such as AVI, MPG, MPEG and WMV. You can click the “Settings” button to set parameters of your output video such as Frame Rate, Bitrate to get the best video quality as you want.
Step 3: Click the “Start” button to start the conversion.
Tips:
1: How to join your Mod/Tod videos
If you want to merge several Mod/Tod videos into one file you can choose them and click the “Merge into one file” to do it.
2: How to split your Mod/Tod video
The “Trim” function also servers as a video splitter. You can set the “Start Time” and “End Time” to set the time of the clip or you can directly drag the slide bar to the accurate position. After cutting your Mod/Tod videos into small clips you can upload them to YouTube, Myspace and so on to share your video with people of the world.
3: How to crop your Mod/Tod video size
By using the “Crop” function you can crop the black edge of your video and you can also drag the line around the video image to adjust your video to your mobile devices. With it you can enjoy and share your DV with other people anytime and anywhere.
4: How to save your favorite picture
If you like the current image of the video you can use the “Snapshot” option. Just click the “Snapshot” button the image will be saved and you can click the “Open” button next to “Snapshot” button to open your picture.

.mods are (somekind of) mpegs ...
At first I though he was talking about the ancient audio .mod files:
"The first version of the format was created by Karsten Obarski for use in the Soundtracker tracker released for the Amiga computer in 1987".
http://en.wikipedia.org/wiki/MOD%28fileformat%29
Oh, nostalgia ain't what it used to be!

How to convert mov to avi or wmv

Hello,
I just caught a short 30 second clip of my son crawling for the first time with my Canon camera. I want to send the video to my Mom via email however the file is too big. Her computer does not play mp4, which is the only conversion option I found, and walking her through installing a compatible player is useless. So I would like to find out how to convert the mov file to avi or wmv, small enough to email. I just purchased Premiere Elements 10 and never used it. I could not figure out how to do it, so if anybody knows, that would be great.
Thanks.

>just purchased Premiere Elements 10 and never used it
Online User Guide http://helpx.adobe.com/premiere-elements/archive.html
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips

How to convert audio only avi to wav?

How to convert audio only avi to wav?
Can I extract only the audio from an avi and insert in to a wav file?
Regards,
Achi

Sure.
You just need to program a Processor to turn off any video tracks, transcode to a WAV-acceptable audio encoding, and then use a DataSink to store the output of the processor as a WAV file.
Also, I bet the following sample program will do it without any modification...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/Transcode.html]

How to convert VOB to other formats?

As a professional VOB converter, Emicsoft VOB Converter is currently one of the best and most easy-to-use converter which can convert VOB videos to most popular video and audio formats with fast conversion speed and perfect sound & picture quality, such as VOB to MP3, VOB to M4A, VOB to WAV, VOB to AAC, VOB to AC3; VOB to DVD Video(*.vob), DVD Video-NTSC(*.vob), MPEG-1 Video(*.mpg), MPEG-2 Video (*.mpg), etc.
Emicsoft VOB Converter can not only play the role as a converter, moreover, it can also be used as a powerful editor, which provides a lot of professional video editing functions, such as merging several videos into one file, cutting any clip of your video, cropping the video size, editing video effect and so on. You can also set output profile parameters including resolution, bitrate, frame rate, aspect ratio to get the best video quality and video size.
How to convert VOB to other formats?
1. Launch the software and click "Add File" button to import files into the software. You can watch them on the preview screen.
2. Edit the added movie by clicking "Effect" "Trim" or "Crop" button which can help you create unique videos easily.
3. Select output in Profile option. Here all popular formats and mobile devices are supported. Then make sure the destination folder.
4. Click "Start" button and the program will automatically start conversion.
Emicsoft VOB Converter is so outstanding with powerful converting functions and editing functions that you can enjoy it as a good helper.
Emicsoft M2TS Converter is currently considered as one of the most professional conversion tool, due to its powerful function, user-friendly interface and easy-to-use operation design. It can achieve any video formats from M2TS to MPEG1, MPEG2, SWF, FLV, DivX, XviD, QuickTime Video, DV, AVI, MP4, WMV and HD videos, so as to make it available to sync M2TS to iPod, iPhone, PSP, BlackBerry and other mobile devices.
Emicsoft Tod Converter is an easy-to-use HD Video conversion tool which helps you convert HD video Tod to other formats like FLV, SWF, AVI, M4V, MOV, DivX, XviD, MPEG-1, MPEG-2, VOB, MP4, M4V, RM, RMVB, WMV, MKV, AVI, 3GP, HD video with high output quality and fast converting speed. Apart from as a HD video converter, it is also a audio converter and extractor, the Emicsoft Tod Converter can aid you to extract music from Tod video such as WAV, OGG, WMA, MP3 with good sound quality.
More softwares may help you:
Emicsoft Video Converter
Emicsoft FLV Converter
Emicsoft MTS Converter

Open the General section of the iTunes preferences, press the Import Settings button, change the default encoder to MP3, right-click the songs, and convert them to MP3. Protected content from the iTunes Store can't be used on an MP3 player.
(37170)

Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to convert digital signal to analog

Hi..
I am using NI 9375 (DIO module) to read the output from flow sensor.
The output of the flow sensor is in the digital signal.(Boolean=True/False).
How can I convert the digital signal to the analog to get the reading of the flow sensor?
I had tried before to convert the digital signal to the frequency so that I can make the conversion from frequency to the flowsensor reading,
but it doesn't work.( I am referring to http://www.ni.com/white-paper/14549/en/ ).

nhan91213 wrote:
Hi..
I am using NI 9375 (DIO module) to read the output from flow sensor.
The output of the flow sensor is in the digital signal.(Boolean=True/False).
How can I convert the digital signal to the analog to get the reading of the flow sensor?
I had tried before to convert the digital signal to the frequency so that I can make the conversion from frequency to the flowsensor reading,
but it doesn't work.( I am referring to http://www.ni.com/white-paper/14549/en/ ).
FYI - If your flowmeter pulsing frequency is higher than 500Hz then you won't get reliable reading using your algorithm, and it will be very unreliable above 1kHz because fastest that loop runs is 1mS (1kHz). In that case you could tie the timed loop to a higher rate (hardware) clock source to go faster than 1mSec loop time. If no hardware then I think you can use high resolution timer (in LV2014, not sure if it was also available in previous version) and a regular while loop with algorithm modification for a faster timing.
New Controls & Indicators made using vector graphics & animations? Click below for Pebbles UI

How to convert .MOD files into .DV for iMovie import

I am urgently (and desperately) trying to import some .MOD files into iMovie 09 for editing. They were made on a JVC cam, but I only have them on HDD now. I tried renaming files to .avi, but still cannot import them. I used Handbrake to convert to mp4 files and can import them now, but quality seems to be reduced even though destination file size is similar.
Can anyone tell me how to convert the .MOD files to .DV files easily? I have read about the ffmpeg tool that you can use in the Terminal, but am not confident to do this as have never used Terminal !
Any help and advice would be very much appreciated.
MikeC

I have a JVC everio 30 GB hard drive video camera and I'm trying to convert the videos as well. Mine are also in mod format and my computer won't convert it either. Should I upgrade to quicktime pro 7 for $30 or just pay $20 for the mpeg-2 add-on? This is for a family camera that is used mainly for occasional family vacations/get together's. No editing, I just want to get these off the camera's hard drive because the hard drive is running out of space and I wanna be able to make them into DVDs so we have a hard copy in case anything happens to my laptop. I'm not sure which is better for my use? The add-on is cheaper but is there other advantages for me to get pro?
Thanks for the help

Album: how to convert burst photos to normal ones?

How to convert burst photos to normal ones?

Got it.This is how you do it.You can only later select other picture if you want.You cannot save them all.After you take a picture,go to the album and tap on the icon for timeshift,it will take you back to select which one you like.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

How to convert media format?

Hi All:
Does any one know how to convert the media format in JMF?
Is there any APIs or Demo about how to convert mp3,avi to the uncompressed wav format?
In windows platform, we can use DirectShow APIs. It's a component of the DirectX SDK. DirectX can help us to decompress the video or audio from compressed format to uncompressed format
(RGB for video, PCM for audio) and it supports streaming also.
Is there any familar APIs in JMF or Opensource for Mac?
Your feedbacks are highly appreciated!
Best Regards,
Tango

Hi,
You can set the codec chain in the Processor (during configured Stage) object which allow you to define your desired Codec, Multiplexer, etc.
For more information, you can look at the JMF API Guide. Since I know that JMF doesn't come with mp3 codec, I think you have to download a codec pack called "ffmpeg" etc which add more Codec to JMF.
About the Mac, I am sorry that I really don't know.
Best Regards
Ferdinand Ng

How to convert PNG image to Vertor Image to make font on Mac

Hi Mac People,
I like to create a set of font, and I have made them in a image editing tool, I have FontForge downloaded but decide to use it to convert instead direct design them inside.
So now I don't know how to convert the PNG image to vector image required by the FontForge, I read some post mentioned Ubuntu has utilities to convert, but I'm not sure OS X has that function too.
Could anyone let me know how to convert PNG so I can create my fonts?
If PNG can't, the software can export TIFF or jpeg or similar.
Please help me, I need make them this few day.
Thanks everyone for giving me a hand!

take a look at:
http://developers.sun.com/techtopics/mobility/midp/articles/picture/

How to Convert an RMI Server into WINNT service

I have an RMI Server, that looks like the following
SimpleRMIServer.java
import java.io.*;
import java.rmi.*;
import java.rmi.server.*;
import java.rmi.registry.*;
import java.rmi.*;
import java.rmi.server.UnicastRemoteObject;
public class SimpleRMIServer
public static void main(String[] argv) {
System.setSecurityManager(new RMISecurityManager());
try {
LocateRegistry.createRegistry(1099);
SimpleRMIImpl implementation = new SimpleRMIImpl("SimpleRMIImpl instance");
// SimpleRMIImpl implementation = new SimpleRMIImpl("SimpleRMIImpl instance");
System.out.println("SimpleRMIImpl ready");
catch (Exception e) {
System.out.println("Exception occurred: " + e);
the SimpleRMIImpl.java also is available. (SimpleRMIImpl.class)
now the problem is how to convert this Server to a service.
I have seen a java class that extends a service class have been converted to a service like the following
TestService.java
// TestService.java
// (C) Copyright 1995 - 1999 Microsoft Corporation. All rights reserved.
import java.io.*;
import com.ms.service.*;
public
class TestService extends Service
static
// Uncomment to disable the assassin. The service will fail to respond
// in the time specified in the last waithint for the third pause
// event received. If the assassin is enabled (i.e. this line is commented
// out, the default), then the service will be forcibly killed.
//Service.disableassassin = true;
int pausecount;
int intcount;
public TestService (String[] args) throws IOException
System.out.println("Sending updated pending status");
CheckPoint(1000);
System.out.println("Sending running status with all controls");
setRunning(ACCEPT_SHUTDOWN | ACCEPT_PAUSE_CONTINUE | ACCEPT_STOP);
System.out.println("Started");
protected
boolean handleStop ()
setStopping(5000);
System.out.println("dying");
return true;
protected
boolean handlePause ()
pausecount++;
if (pausecount == 3)
System.out.println("pause #3, sleeping for 30 seconds, should be killed in 2+5 seconds");
setPausing(2000);
try
Thread.sleep(30000);
catch (InterruptedException e)
System.out.println("interrupted");
else
System.out.println("received pause #"+pausecount+", pausing for 2 seconds");
setPausing(5000);
try
Thread.sleep(2000);
catch (InterruptedException e)
System.out.println("interrupted");
System.out.println("sending paused");
setPaused();
System.out.println("sent paused");
return false;
protected
boolean handleContinue ()
System.out.println("received continue, continuing after 2 seconds");
setContinuing(5000);
try
Thread.sleep(2000);
catch (InterruptedException e)
System.out.println("interrupted");
System.out.println("sending running");
setRunning();
System.out.println("sent running after continue");
return false;
protected
boolean handleShutdown ()
System.out.println("received shutdown, treating as stop");
return handleStop();
protected
boolean handleInterrogate ()
System.out.println("received interrogate");
setServiceStatus(getServiceStatus());
System.out.println("sent status for interrogate");
intcount++;
if (intcount == 3)
System.out.println("received 3rd interrogate, stopping self in 5 seconds");
try
Thread.sleep(5000);
catch (InterruptedException iex)
System.out.println("interrupted");
System.out.println("stopping");
StopServiceEventHandler(1000);
return false;
using the jntsvc.exe tool, that code have been converted to an executable, then installed as a service.
I've tried to embed the RMIServer code in the constructor for this service, but it didn't work
Hope you have a clear understanding of what I'm saying
any help, highly appreciated
thanx in advance
here is my email [email protected]
regards

Our second installment of "Questions from the Past"
Dear viewer, check out Tomcat's source, I believe they implement Tomcat as a service so just follow what they did.
Steve - your answer Guru
Tune in next week for our third installment of "Questions from the past"

How to convert PMS colors to CMYK?

I am not an Illustrator user but need to know how to change PMS colors to CMYK colors in an AI file. It would also be helpful to know how to change the colors as well as how to convert them. Thanks in advance.

Thanks Scott. I actually figured that out just after posting. I am a Photoshop
and Lightroom user who has never opened AI before today. I just needed to
modify an AI file that a designer created for me. My apologies for the dumb
question.
Joel Pickford
PICKFORD PICTURES
1920 N. Echo Ave
Fresno, CA 93704
(510) 386-1506
http://joelpickford.com/

How to convert a optionset into multi selection picklist in crm 2011 using javasacript??

hi,
where user want to select not only one but multiple value
from a pick list. I tried examples but it shows some errors.
How to do it??

Hey I meet a problème on my development see my result :
link : https://social.microsoft.com/Forums/getfile/652331
a multiple select list on my crm 2013 I do this process on this forum :
link : https://social.microsoft.com/Forums/en-US/2db47a59-165d-40c9-b995-6b3262b949eb/how-to-convert-a-optionset-into-multi-selection-picklist-in-crm-2011-using-javasacript?forum=crmdevelopment
my development :
// var_sc_optionset >> Provide schema-name for Option Set field
// var_sc_optionsetvalue >> Provide schema-name for field which will store the multi selected values for Option Set
// OS >> Provide Option Set field object
// OSV >> Provide text field object which will store the multi selected values for Option Set
//Method to convert an optionset to multi select Option Set
function ConvertToMultiSelect(var_sc_optionset, var_sc_optionsetvalue, OS, OSV)
if( OS != null && OSV != null )
OS.style.display = "none";
Xrm.Page.getControl(var_sc_optionsetvalue).setVisible(false);
// Create a DIV container
// var addDiv = document.createElement("<div style='overflow-y:auto; color:#000000; height:160px; border:1px #6699cc solid; background-color:#ffffff;' />");
var addDiv = document.createElement("div");
addDiv.style.overflowY = "auto";
addDiv.style.height = "160px";
addDiv.style.border = "1px #6699cc solid";
addDiv.style.background = "#ffffff";
addDiv.style.color = "#000000";
OS.parentNode.appendChild(addDiv);
// Initialise checkbox controls
for( var i = 1; i < OS.options.length; i++ )
var pOption = OS.options[i];
if( !IsChecked( pOption.text , OS, OSV) ){
// var addInput = document.createElement("<input type='checkbox' style='border:none; width:25px; align:left;' />" );
var addInput = document.createElement("input" );
addInput.setAttribute("type","checkbox");
addInput.setAttribute("style","border:none; width:25px; align:left;");
else {
// var addInput = document.createElement("<input type='checkbox' checked='checked' style='border:none; width:25px; align:left;' />" );
var addInput = document.createElement("input" );
addInput.setAttribute("type","checkbox");
addInput.setAttribute("checked","checked");
addInput.setAttribute("style","border:none; width:25px; align:left;");
// var addLabel = document.createElement( "<label />");
var addLabel = document.createElement( "label");
addLabel.innerText = pOption.text;
// var addBr = document.createElement( "<br />"); //it's a 'br' flag
var addBr = document.createElement( "br"); //it's a 'br' flag
OS.nextSibling.appendChild(addInput);
OS.nextSibling.appendChild(addLabel);
OS.nextSibling.appendChild(addBr);
///////Supported functions
// Check if it is selected
function IsChecked( pText , OS, OSV)
if(OSV.value != "")
var OSVT = OSV.value.split(";");
for( var i = 0; i < OSVT.length; i++ )
if( OSVT[i] == pText )
return true;
return false;
// var_sc_optionsetvalue >> Provide schema-name for field which will store the multi selected values for Option Set
// OS >> Provide Option Set field object
// Save the selected text, this field can also be used in Advanced Find
function OnSave(OS, var_sc_optionsetvalue)
var getInput = OS.nextSibling.getElementsByTagName("input");
var result = '';
for( var i = 0; i < getInput.length; i++ )
if( getInput[i].checked)
result += getInput[i].nextSibling.innerText + ";";
//save value
control = Xrm.Page.getControl(var_sc_optionsetvalue);
attribute = control.getAttribute();
attribute.setValue(result);
I have to do 2 field one is option list field and the second is textfield,
option list field : new_books
textfiled : new_picklistvalue
my js is on onload event see :
link : https://social.microsoft.com/Forums/getfile/652333
thanks you for you'r help

No picture, false AVI? How to convert?

Similar Messages

Maybe you are looking for