No Picture MMS on 3GS after update to 4.0 software
After I updated my 3GS to the 4.0 software, I lost the ability to send picture messages. If you know how to fix this, please let me know what I have to do!
Same problem in Germany with Telekom. I've tried everything, but the picture button won't appear with iOS 4. The internet connections via Edge/G3 doesn't work either. Did a complete restore yesterday, did the requested update for carrier settings... now i've issues connecting to Wi-Fi too and still no MMS service.
Sorry Apple, but this really *****! Please do something!!
Similar Messages
-
how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know
What "auto shutdown problem" are you talking about?
-
i have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??
touch me wrote:
it says ICCID: unknown
Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
How do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3
how do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3
Hi dreamafrombartow,
I hope you are able to get your pictures back. Do you have a backup anywhere else?
I did find a couple articles that may help with your recovery.
If you need help restoring an iCloud backup
http://support.apple.com/kb/TS4036
iCloud: Troubleshooting missing information after restoring an iOS device
http://support.apple.com/kb/TS4605
Best regards,
Nubz -
I am unable to activate my iphone 3gs after updating ios 6.1.3
i am unable to activate my iphone 3gs after updating ios 6.1.3?
The activation servers were down for a bit yesterday.
Try again.
A SIM is required for activation. If problems continue, the two most common activation issues are the result of a hacked or jailbroken device. -
How to recover photos from photo in Iphone 3GS after updating to the IOS 6.0.1?
Same problem here, and it's not isolated.
https://discussions.apple.com/message/20228281#20228281
I believe you will find you can again sync Photos if you delete the "iPod Photo Cache", but predict that any subsequent attempt will fail. In my case, the enxt sync removes all the photos again - I've seen other reports of error messages upon sync. Mine just fails silently. :-) -
How to recover photos from photo in Iphone 3GS after updating to the IOS 6.0.1?
How to recover photos from photo in Iphone 3GS after updating to the IOS 6.0.1?
Hello vikings2013
You can recover photos from iTunes or iCloud as long as you had a backup. The article below will give instructions on backup and restore through both options of computer and iCloud.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.
<Post Edited By Host> -
IPhone 3GS after updating Ios 6.1.3 cannot be activated
iPhone 3GS after updating Ios 6.1.3 cannot be activated. When I connected my iPhone to iTunes on PC, iTunes said that there was no SIM card on iPhone. I also took out the SIM Card and took in the SIM Card, but it wasn't working. I activated iPhone through WIFI but it said that the server was temporarily not available. I tried again more and more times but nothing's changed. Please help me.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
HT4623 why i cant activate my 3gs after update to ios6?
why i cant activate my 3gs after update to ios6?
The vast majority of activation issues are the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
-
HT4623 i use iPhone 3gs, after updating am unable to activate my iPhone how do i go about it
i use iPhone 3gs, after updating am unable to activate my iPhone how do i go about it
That's almost always because the phone was hacked or jailbroken to unlock it.
-
After updating to iOs 6 software, sending picture messages doesn't work or is extremely slow. I have to try to send it multiple times before it will actually send and even then it will take almost ten minutes. Any advice?
So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...
-
HT4623 i cannot activating my iphone 3gs after update
i cannot activating my iphone 3gs after update?
That's because it was jailbroken, either now or in the past. We cannot provide support for jailbroken phones here.
-
I receive my daughters sms after updating to the new software
Hi all,
after updating to the new software on my iphone, I suddenly receive and sends sms etc to my daughters mobile phone. How can that be stopped? Has is someting to do with using same appleid?
Bo Christensen
+45 40 16 66 55Diego_Onofre wrote:
Hey ! Today I tried to make the update for my iPhone 4 and it died. I get the same type of message your getting and nothing will make it respond or set it back to the normal settings. Did you call apple? did you get a new phone? were you able to fix it? I'm really disappointed on apple and iphone.
if you were to read the ops original post he said hes getting a new phone.... -
After update my epson scanner software stopped working
After update my epson scanner software stopped working
In Image Capture, when scannig i have this bug
https://dl.dropboxusercontent.com/u/733136/scan%20bug.mov
Can someone please test this
Thanks
Pedro MolinarThe Billions colors options creates a Tiff file , the Millions creates a Jpeg.
the Tiff has worst quality and a bigger size -
My backup is failling to restore and displays an error message: backup either corrupt or not compatible with the device. This happened after updating to the latest software IOS7
I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.
Maybe you are looking for
-
How to edit (split/crop) original captured avi files
I have a whole library of camcorder tapes that I want to convert. But I don't necessarily want to save all the video. Let's say the first tape has 15 minutes of good footage that I want to preserve. Then there is 10 minutes that is not worth saving.
-
Radio genres not showing up - no access to stations!
Hi, If anyone can help me with this frustrating problem, I'd much appreciate it! I'm a new user of itunes (using windows xp professional), and would like to access streaming radio stations... however, when I click on the 'Radio' option in the source
-
ESS Web Dynpro "Change Personal Number"
Hi, we are using EP70 and ERP2005. When I start the Web Dynpro "Change Personal Number", the user needs to type in the personal number he want to change to. Is there a chance, to make this an F4 Input help field, with interactive selection? TIA, poi
-
Setting faultstring from BPEL/Mediator
Hi Experts, I'm developing an SCA based application where my oracle mediator routes the request to BPEL process which in turns execute an API through adapter. The problem here that the fault which i throw from mediator is being encapsulated in the de
-
a chaque fois que je connecte il bloque mon finder alors qu'il n'y a que 158 giga d'utilisé sur les 2 to .... que faire ??