No Picture, Same Format

I have 2 MP4 video files on my PC (OS Windows 7 Home Premium 32 bit). The first one is 23.0 MB/ 09:57 minutes long. The second 373 MB/ 01:27 minutes (hour and 27 mins long). I have copied both of them to the miniSD memory card (1 GB) on my Nokia 6700 mobile (via USB cable). Windows Explorer in my OS converts the MP4 files into WMV files prior to copying the videos to my mobile. The 23.0 MB video files plays with sound and picture on my mobile, but the 373 MB file has sound but *no* picture. How come 2 video files of the same format (WMV) behave differently? Hope somebody can help me.
Thanks
Solved!
Go to Solution.

haZey wrote:
Hi drz22,
Even when files are of the same format, the audio and video maybe converted and coded differently. Are your MP4 files completely identical? Have you tried converting it into aother playable format for your device to see if that works?
Video formats that work on the Nokia 6700 are
MPEG-4
3GPP formats (H.263)
Let us know how you get on.
Regards,
haZey
Hi haZey
I downloaded and installed Movavi Video Converter (http://movavi.co.uk/videoconverter/) and converted the hour and 27 minuter long mp4 video file to a mpeg file. Copied it to my Nokia 6700 and it plays with picture and sound! Only one disadvantage, the Movavi Video Converter I downloaded is a free 30 day trial version and it puts watermarks on the converted videos. It would be nice if there was a free video converter like Movavi that doesn't put watermarks on converted videos.
drz22

Similar Messages

Can you save your own theme and button set up so I can use the same format

Can you save your own theme and button set up, so I can use this same format for similar content. I want to keep the button content and the theme the same without having to create it everytime? I am trying to streamline the process for multiple dvd's with the same menu and buttons but different content. Does that make sense?

I am only new to this caper too, but I am pretty sure you can save a theme as a favourite by pressing the "save theme as favourite" button under file. If you have edited an existing theme but don't want to lose it, make sure you untick the replace existing button.

Retrieve front end values of editable alv in same format

I have a problem to retrieve the front end values in editable alv filled by user.
I am able to get it from MODIFIED CELL method but it gives the values after
alv automatically conversion. For example if user filled 1 in cell of type numc
then i want to keep it as 1 not as 00..001 format of numc.
Same for when user fill alphbets in small letter the alv convert it in CAPS.
I want to retain it as it as filled by user.
Example: User filled aAbBcFG in a cell
then it should update in database in same format not like AABBCFG as alv did
<offer removed by moderator>
Edited by: Rocky_S on Jan 20, 2011 7:50 AM
Edited by: Rocky_S on Jan 20, 2011 7:51 AM
Edited by: Thomas Zloch on Jan 20, 2011 11:24 PM

Hi Srinivas I have used CONVERSION_EXIT_ALPHA_OUTPUT for number input. My problem is that
when user fill 0 in the alv cell then alv automatically convert it into 00000000. My field is of type numc
that why it converts in 00000000. I want to retrieve it as the user fill in alv cell. Through this function
module the import parameter parameter is of numc format not as filled by user. In my case if it is 0
then then i should retrieve it as it is.
My actual scenario is i have a numc type field in alv and i want to keep it as mandatory. For which i am
writing a logic. Because in my table there is a valid entry of 0. If user do not fill 0 then it takes automatically
0 as input because of initial value of numc field. I want to restict it. I can not convert this field as char.
Give me some logic to make numeric field mandatory.

How can I get page 2 in the same format?

I have just completed the first sheet in Numbers, and I would like to know how to bring up successive sheets in the same format.
To get the first sheet, I went to:
Numbers
File
New from template chooser
Blank
Now I have filled that sheet and would like to continue with sheet 2.
I tried clicking on Sheet in the toolbar, but got a very small sheet, not full size.
Thanks for the help.

Depending on how your margins are set and the height of your table rows, you will get some number of rows per page. Your only control of where the pages break is with those controls. Margin setting is a Sheet Property and can't be changed page by page, but if there's a particular row that you want to end a page with, just increase the height of that last row until the rows below pop to the next page.
If you have a Header Row, you can ask it to repeat at the top of each page, so you don't have to manually repeat the column headings.
Knowing how to easily change the dimensions of a table, in rows and columns, is amongst the basic stuff covered in the Numbers User Guide. You can get it from the Help Menu. A good read on a Winter's evening.
Jerry

A Pages document sent to another computer cannot reproduce the same format. Is there a process which we should use ?

A Pages document sent to another computer does not maintain the same format. Is there a process to ensure compatibility ??

JRP IV wrote:
I'm just trying to print my online pay stub
Since my printer isn't working, I'd like to save document to my desktop ("save as" is the only option given to me) and send it as an attachment to a friend's computer and working printer.
What browser are you using?
Are you trying to print or to save the doc? Whether you have a working printer or not is really immaterial. If you're trying to print, then File > Print > PDF > Save as PDF…. If the resulting PDF is small enough (<5MB, though my preference is <1MB), e-mail it to your pal. If it's too big, transfer it using a chat programme or a file service (MediaFire, RapidShare, etc).
Now, I am currently trying to send the document directly (via email, an option given under "file") the pay stub from my employer (who uses ADP online payroll services), to that computer and working printer ....and I'm receiving a window (with apple mail logo on it) that begins with "To view this page, you must log in to this area on agateway.adp.com:443:" and asks for "name" and "password". I've put in both ADP's information, and what I believe (could be very wrong) to be apple mail's information, and either/neither/nothing seems to work!
I don't understand any of this. You need to explain better—or perhaps just post a screen shot (blank any private or confidential info on it prior to posting).

How do I add extra pages to template documents in the new version of pages which carry over the same formatting, borders etc?

Hi,
Does anyone know how how to add extra pages to template documents in the new version of Pages which carry over the same formatting, borders, styles etc? In iWorks09, all styles, borders etc just used to carry over to the next page. In the new Pages, this doesn't seem to happen. Unless I'm missing something.
Any help would be appreciated.

Everything is a matter of degree! (Speaking for myself).
Review and rate Pages 5 in the App Store and if you are interested check out all the changes here:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Peter

Sent e-mails do not deliver in th same format

Using windows 7 with aol, I recently have been sending e-mails that do not arrive in the same format that I sent. Spacing is out of line, columns are out of order and the page is almost unreadable.

Hi mjmarcus,
Firefox is a web browser. It displays the content of existing sites. Things like email or page contents come from the content provider. Who is your email provider? You'll probably have better luck consulting their help documentation. You might want to try from another browser as well so you can see if this issue is only happening in Firefox. I'd image that there is just some extra encoding being added to your emails if you are using the wysiwyg editor.
Hopefully this helps!

Want to populate LIST in the same format as it is coming in the application

HI,
I need to create a list on my page and want exactly it the same way as it is getting displayed in the apex application when u open it.
What are the setting required so that my list appears in the same format as is appearing in the site.
Is is possible for apex users to create their list in same fashion or this theme is only for apex dev team.
kindly revert back
thanks
Sanjna
Edited by: user781218 on Aug 11, 2010 2:26 AM

Hi
Thanks Again.
I want to create list in my page in a particular format. I am able to create list in a page, but I donot know what exactly I should select while creating a list so that it gets displayed exactly in the same way as it is getting displayed in the application by default.
Currenly I am having lists in my webpages but they are getting displayed in some other fashion.
If you/ anybody can help me showing how to get the list in the format as shown in Apex application
( like it has thin verical buttons , and when one select a particular record, it gets highlighted, And records are separated by horizantal lines....I want these features in my list to be displayed in the page)
Want to know if is there a particular theme that supports it or is it because of some plugin. Am also using the same theme as apex application default theme.
Regards,
Sanjna.

QuickTime Player 10.1 no more includes the ability to save a movie file in the same format as the original movie after editing it? No, it doesn't!

Since upgraded to Lion, I have to wait for QuickTime Player 10.1 to "CONVERT" every file that I edited in it.
Yes, it might save some disk space for me.(Which is not always the case though.) But it also takes almost 10 times or more as it did when back on Snow Leopard with QuickTime Player 10.0 there I could save any file in the same format as the original movie WITH NO NEED TO CONVERT IT.
Now I have to wait like 10 minutes to delete just a few frames.(The time it takes depends upon the original size of that movie. The larger the longer.) And guess what? If you have two clips originally split up from a movie and sperately getting saved(converted actually) with a loooooooot of time, and you naively added one of them to the other's end and then saved the finished one. It converts AGAIN! Doing so back on Snow Leopard with QuickTime Player 10.0 only takes you even a few seconds only!
Seriously, are we eating Apple or dirt this time?

My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
It seems obvious from other forum posts this is a planned move so that everything is the "new mobile device" ready state/format. To use Marc Speth's post as material....
https://discussions.apple.com/message/23749558#23749558
this is probably about dumbing down desk top OS to that pf iPhones and iPads. This is not what I paid good money to own a Mac Book Pro for....
Today I rolled all the back to Snow Leopard. Really good move...... All those new features hey? I lost the ability to work in spaces and of course the whole Quicktime debacle.
The rolling back process was easy, restored from a point prior to installing Lion and Mavericks and the only issue was my iPhoto libraries. Thank my stars that I still had back ups that I had not converted yet.... viva la Mavericks...NOT. Apple can keep it.
Unsure if you are just venting or if there is supposed to be a question here. Basically, I assumed this to be Apple's idea of an improvement. That is, I really believe the ProRes 422 codec is a better intermediate codec than the AIC codec but most of my old HDV camcorder family tapes were imported by iMovie (for compatibility with my wife's non-FCP computer configuration) and, like your content, is/remains stored as AIC/PCM MOV files. At first I thought this might be a generalized change affecting all QT X based apps but when I went to check the latest iMovie v10.0 update, became confused when I noted that AIC source files were not automatically updated to ProRes 422 and continue to play natively in the iMovie source media viewer.
I guess this is supposed to be a logical evoluption and we were supposed to have seen the "handwriting on the wall" dating back to when Apple's first released the free ProRess "player" ProRes 422 codec. Still, it would have been nice if Apple had given some warning during the last few years so users could plan and prepare for such a drastic change. For the moment, I am just thankful that AIC remains, at least temporarily, supported nativelyby the iMovie video editor under Mavericks. Thank goodness for small favors.

Date in xml file always appears in same format

Hi,
I am relatively new to XML and JSP.I am on a project where i have to transfer data to and from an Oracle 8i database to XML using JSP.everything worked fine except for the follwing:
the date format in xml is always 'yyyy-mm-dd HH:MM:SS'.
the datatype is date in oracle and string in jsp.when i try to upload the data in XML to oracle it gives me date format not recognised error.I ve tried using trunc and to_char in the query which fetches records into a recordset in JSP but to no avail.i keep getting the same format.
Can someone please help with with having the date format as 'dd-mon-yyyy'.
Thanks a heap for the help
regards,
Vinayak

Hi,
I ve tried out the solutions suggested by you and tried using java.sql.Timestamp
as follow:
<%@ page import="java.sql.*" %>
<%@ page import="java.io.*" %>
<%@ page import="oracle.sql.*" %>
String dateString = rset.getString("installation_dt");
java.sql.Timestamp date = new java.sql.Timestamp.valueOf(dateString);
But tomcat throws up the following error
:104:
cannot resolve symbol
symbol : class valueOf
location: class java.sql.Timestamp
java.sql.Timestamp date = new java.sql.Timestamp.valueOf(dateString);
Hope you can help me.
Thanks a heap
Regards,
Vinayak

Export webi to excel with the exact same format

Hello expert,
I develped a webi report, but when I exported it into excel file, its format is defferent from WEBI report, such as text for legend with multple lines in webi presented in one line in excel, there are a few descrepency. please tell me how can I export webi to excel with the exact same format?
Many Thanks,

Hi,
There are options for the "save as excel" step . either a) for formatting , or b) for data
these should help.
The reason why there are 'undesirable' rows (also, merged rows / columns) is because your report document has table outlines which have been positioned 'by eye'.
When the rendering algorythm outputs it content, it's looking at pixel-level , so the relative position of borders can get messed-up. It's mainly due to slightly sloppy formatting.
Regards,
H

Export values to listbox with the same format

Dears,
kindly i need some support please to solve this problem.
I have a listbox that retrieve a data as per auto filter based on 3 criteria, but these data isn't retrieved with the same format, i retrieve these data from tow different tables, both of them exported with the default format,
note: the table source is imported via "Existing connections" but the values format are processed at both of all, is this problem related to the data source or lixtbox options
i uploaded the whole workbook, you can call the userform from sheet that called "Interface", and fill the 1 & 2 combobox with any inputs, and the last combobox you have to choose "Dec", then hit "Daily" or "Monthly"
button
Private Sub Daily_Click()
Dim Source As Range, c As Range, i%, Aux As Worksheet
Dim fa As Range, nc%, ca, v As Range, A As Worksheet, s$
Me.ListBox1.ColumnCount = 11
ListBox1.Clear
Application.ScreenUpdating = True
Set A = ThisWorkbook.Sheets("Daily")
Set Aux = ThisWorkbook.Sheets("popup") ' auxiliary sheet
Set Source = A.Range("A1:CB1")
Set c = A.Range("a1").CurrentRegion
Source.AutoFilter Field:=1, Criteria1:=Month_list.Value
Source.AutoFilter Field:=4, Criteria1:=Leader_list.Value
Source.AutoFilter Field:=6, Criteria1:=User_list.Value
Set v = c.SpecialCells(xlCellTypeVisible) ' filtered range
Aux.Cells.ClearContents
v.Copy Aux.Range("a1")
Set fa = Aux.Range("a1").CurrentRegion
nc = fa.Columns.Count
ca = Array(3, 13, 14, 15, 16, 17, 21, 30, 31, 32, 33) ' columns you want
For i = LBound(ca) To UBound(ca)
fa.Columns(ca(i)).Copy Aux.Cells(1, nc + 3 + i) ' create final range
Next
Me.ListBox1.List = Aux.Cells(1, nc + 2 + i).CurrentRegion.Value
With Me.ListBox1
Me.ListBox1.BoundColumn = 1
Me.ListBox1.BorderStyle = fmBorderStyleSingle
Me.ListBox1.ColumnHeads = True
Me.ListBox1.BackColor = RGB(255, 255, 255)
Me.ListBox1.ColumnWidths = "70; 75; 57; 80; 90; 150; 60; 80; 80; 80; 80; 70"
Me.ListBox1.BorderStyle = 1
Me.ListBox1.MultiSelect = fmMultiSelectExtended
End With
End Sub
the workbook
thanks a lot,

Either you need to reformat the values in memory as required before populating to the ListBox, or if the cells are formatted the way you want you can read the cell's text values, though not in one go as an an array.
Based on a quick look of your code above try the following, but adapt if it's not quite right
Set fa = Aux.Range("a1").CurrentRegion
nc = fa.Columns.Count
ca = Array(3, 10, 14, 16, 20, 21, 22, 23, 24) ' columns you want
'' don't need this
' For i = LBound(ca) To UBound(ca)
' fa.Columns(ca(i)).Copy Aux.Cells(1, nc + 3 + i) ' create final range
' Next
Dim lastRow As Long, j As Long ' put these up top
' after copying to Aux, but no need to
lastRow = Aux.Range("a100000").End(xlUp).Row
ReDim arr(1 To lastRow, LBound(ca) To UBound(ca))
For i = LBound(ca) To UBound(ca)
For j = 1 To lastRow
arr(j, i) = Aux.Cells(j, ca(i)).Text
Next
Next
Me.ListBox1.List = arr

RAW files from my Nikon Df (NEF) will not display in Lightroom. Same format from Nikon D300s works. Camera firmware is current. Df RAW (NEF) files display in Nikon software products, not in Apple software (Aperture or iPhoto).

RAW files from my Nikon Df (NEF) will not display in Lightroom. Same format from Nikon D300s works. Camera firmware is current. Df RAW (NEF) files display in Nikon software products, not in Apple software (Aperture or iPhoto).

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The above list show the current camera models supported by Adobe Camera Raw (plugin for PS CC) and Lightroom 5.3.
You will see that the Df Raw support was provided in the latest version of LR 5.3. Support for the D300s was introduced in LR 2.5. (the NEF files are different.)
Lightroom and Adobe Camera Raw can only be updated after the camera manufacturer has produced the camera and made it publicly available. If you are using an earlier version of Lightroom then that is your problem.
Please post details of the version you are using at present.

How to export edited 5D material into same Format

Hello ppl!
Just maybe someone can help me with this one...
I know it is more of Technical side of 5D, but my Q has something to do with it;
As we know, 5D shoots video, compresses it with H.264 codec and saves it in .MOV container!
For EDITING purposes I use ADOBE CS5 (strong working station with CUDA Mercury engine and everything)...
Anyhow, I was just shooting "Making Of" for some Feature film - and what I wanna do is CLEAR FOOTAGE MATERIALS of unnecessary parts - and then export it back to HDD and give it to Film production
But how do I get to export edited material in the same container and with same properties as originally shot footage was????
ADOBE has quite powerful MEDIA ENCODER, but you can't save h.264 file to have .MOV extension!!!
You can choose H.264, but then your file will have [b]*.mp4[/b] extension... -- Further on - will that file be of the same quality as the file I downloaded from my CF-card???
Any ideas about that - or maybe an advice for some other ENCODER???? ----- Just don't suggest MAC cause I can't afford it at the moment!!!!
What I can do is use AVID MEDIA COMPOSER 4 or 5 (also on my Windows workstation) - but since AVID recodes all footage as the first step when importing it, I am not sure it would fullfill my needs!!!!!
Hope someone will know how to handle it!!!!
Cheers!
V:

-You see, the problem is that my Premier, actually my Adobe Media Encoder can't export to any MOV file higher than Standard Def... Why is it so, I don't know, maybe cause my QT isn't PRO???? Do you think that going PRO would help this matter?
No, you don't need QT Pro for export (or import, for that matter). Are you selecting Preset or Video Codec in the Export Settings window? Like this:
Do you have these, or at least most of them?
-- you also mention ProRes and Proxy here as well, but I am stuck with PC - I wonder how are those AVID QT CODECS gonna work with PREMIERE - are they also gonna re-encode the entire material???
The Avid codecs work fine with Premiere on a PC--I use them frequently myself. But, yes--regardless of the codec you use to export these files, they will be transcoded/re-encoded. I just checked with an FCP buddy, and he said that his Canon T2i clips (similar/same format to the 5D) will import directly into FCP, so if that's what you're using on the Mac, you can forgo the transcoding. That said, transcoding to DNxHD (or ProRes) is not going to incur a visual quality hit, though the files will be larger.
- which Format (codec) are the final files gonna be???
H.264! They're the same as the originals, just trimmed to length.
- Thanx for that one! I hope it works on Windows as well, since Windows is my OS - and thnx for coupon code:))))
Well, you use this plug-in on the Mac; it enables you to read NTFS-formatted drives on the Mac. You'd just continue to do what you've always done, and the Mac user would need the plug-in. If you want to read HFS formatted drives on a PC, you can use Paragon HFS for Windows or MacDrive. Either of those will be good for HFS drives on a PC. Of course, you only need one of these drivers; either NTFS on Mac, or HFS on PC.
There was some mention of using Quick Time PRO as only solution here... Do you have any idea what is that all about??? What can be done - editing wise - with QT PRO??? Or is it just bringing up some more Codecs into the game????
I prefer MPEG Streamclip; it does all the editing (well, the editing you need) that QT Pro does, and it doesn't cost anything. I recommend checking that out first before sending Steve Jobs any money

IPhoto: I was downloading photos from my iPhone every day during my holidays and suddenly one day: the following file could not be imported unrecognized format. And it's still same iPhone 4S and same format JPEG

iPhoto: I was downloading photos from my iPhone every day during my holidays and suddenly one day: the following file could not be imported unrecognized format. And it's still same iPhone 4S and same format JPEG

What version of iPhoto?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

No Picture, Same Format

Similar Messages

Maybe you are looking for