No picture when capturing. Can anyone help
Hi all
Can someone please help me, when capturing from sony DSR-11 deck im not getting any picture. Still getting audio and time code is still running from tape. It does still capture fine but cant just view tapes to log them.
was it working before?
have you tried reselecting the Easy Setup for your project (DV-PAL), then reopening L&C and trying again?
when things that were working suddenly go strange for no reason, then trashing the prefs is usually a good first line troubleshooting procedure.
Similar Messages
-
I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?
And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT -
Blue question mark instead of my picture message. Can anyone help?
I've recently restored my iPhone 4S and going back through my old messages none of the pictures can be opened. It's replaced with a blue question mark. Can anyone help?
No app installed that will view the pics and bar codes.
Which email client are you using? Which version?
File suffix of the pics & bar codes? Example: .pic, .bmp, .jpg, etc. -
Pictures not loading can anyone help ??
I'm working on my first serious pages document, but keep loosing a number of pictures in the document. They show up as gray sizeable shape with question mark and when saving, I get warning that -...list...- pictures could not be loaded with a button 'continue'.
The document is only 20 pages long and I understand that one might create 400 pages long docs
After splitting the document, the problem persists also in document of 6 pages, with different pictures.
Can anyone please help??All pics I use are saved in .jpg in iPhoto and they are all from the same camera and photo-session and are directly dropped in pages from iPhoto.
All other pics in the document are OK, but some of them 'get lost' somewhere along the process.
When dropped, they are OK, but after some time, or after a save command in pages, do not show up anymore (question mark for size + location). -
My final cut shot down when rending, can anyone help?
Process: Final Cut Pro [492]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 6.0.5 (6.0.5)
Build Info: FCPApp-810171515~36
Code Type: X86 (Native)
Parent Process: launchd [167]
PlugIn Path: /Users/lamawood/Library/Frameworks/ProMedia.framework/Versions/A/ProMedia
PlugIn Identifier: ProMedia
PlugIn Version: ??? (???)
Date/Time: 2011-08-08 02:19:13.734 +0200
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 78953 sec
Crashes Since Last Report: 33
Per-App Interval Since Last Report: 10654 sec
Per-App Crashes Since Last Report: 4
Anonymous UUID: 2817CA08-9B3E-46F1-99AB-56DC8D88FF81
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 ProMedia 0x268a8e53 GI_GetFrame(PMFormatDescription const&, PCURL const&, unsigned int, PMFrameRequest const&, PCBitmap*, void*) + 341
1 ProMedia 0x268a6862 PMClip::getFrame(PCTimeValue const&, PCTimeValue const&, PMFrameRequest const&, PCBitmap*) + 368
2 com.apple.ozone.framework 0x35884e36 OZFootage::loadBitmap(OZRenderParams&, PMFrameRequest const&, PMLayerDescription const&, PCTimeValue const&, PCTimeValue const&, bool) + 4504
3 com.apple.ozone.framework 0x358858d9 OZFootage::getCachedBitmap(OZRenderParams&, PMFrameRequest const&, PMLayerDescription const&, PCTimeValue const&, PCTimeValue const&, PCHash128 const&, bool) + 897
4 com.apple.ozone.framework 0x35893e45 OZFootage::getBitmap(OZRenderParams&,Correction: this is the Final Cut Studio forum...
laminfromoslo,
Although there are probably several people who can decypher the error log info you posted, I'm not one of them...
First, I always repair permissions if something in FCS starts acting up. Then I'd dig into the Autosave Vault and pull out the latest version of the project available and restart it to see if the crash was a fluke or if something is broken. From there, the questions become clearer and the answers are easier. -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out
I'm assuming you have Photo Stream set up of both devices. However, it seems many users are experiencing the same as you - my take is that streaming photos is not foolproof yet.
-
I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
I took a picture using camera plus app. The photo shows up in my camera roll as a thumbnail; however, when I tap to view the photo it comes up as a gray box. I tried downloading, emailing, and copying the picture, but it always saves as a gray box. Can anyone help me?
Hi Giorgiovdb!
Unfortunately I cannot help you; all I did was test for you.
I did an upgrade over my Lion install with Mountain Lion which went fine. I just tested icon view in my Finder on different files and folders and here in my installation all stays fine; good readable like in column view!
The only thing you might try is change your Font in Finder and set it back to the original afterwards!
I quickly Google'd how to change fonts in the Finder as appearantly there's no obvious gui item for it:
http://usermanifest.wordpress.com/2012/07/06/osx-finder-title-bar-font/
Try to see if it brings you anywhere!
At my post all fonts act normal after my upgrade to Mountain Lion; I don't do a clean install unless I really have to!
Goodluck!
Gaytan -
Hi there, I want to change the background-color of the browser, when a popup-picture is shown. This picture pops up by clicking a hyperlink in the text...can anyone help me please...thanks a lot
Hi,
CSS is interpreted by your browser, so server cache seems unlikely in htis case. There is however some hierarchy in CSS, so parts of the APEX CSS, theme CSS or page CSS might overwright or block yours.
Does changing the CSS on runtime affect your page? Eg, run the following in your browser console and see if your page turns black: $('#uBodyContainer').css("background-color","black")
Also try moving up your css in the hierarchy labeling it as important:
div#uBodyContainer {
background-color:#000000 !important;
See:Assigning property values, Cascading, and Inheritance
Regards,
Vincent
http://vincentdeelen.blogspot.com -
I had some problems with my MacbookPro and did some clean up and further back-up (time machine already in place for a long time). Now, suddenly I can't access my pictures anymore through iphoto asking me for a library (never asked for before) and I have no clue where the pictures are actually saved when imported in iphoto. Can anyone help me recover my pictures, such as telling me WHERE the pictures are actually stored? Thank you so much!
I had some problems with my MacbookPro and did some clean up
A critical question - exactly what "clean up" did you do and how?
Do you have an iPhoto library in yoru pictures folder? If you depress and hold the option key and launch iPhoto - what do you see in the select library window? Select each library there and see what you have
LN -
Hi, I´m trying to use the lightning to usb camera adaper, but I get a message that ¨there is too much energy needed to support the device¨, so I can´t download my pictures, can anyone help me?
This discussion may help.
It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards. -
Hi,
I am developing an iphone app which is using camera device. When app comes from background to foreground and when we switch on screen for using camera, the shutter is stuck.
Can anyone help?Post in the developer's forum.
-
can anyone help me out?
thxYou can transfer the purchases you made on your old iPhone 3 by plugging it in to iTunes and doing File > Devices > Transfer Purchases from your IPhone to the iTunes on your computer. This will get music you purchased in iTunes, apps, etc. (e.g., movies).
But for the rest you would need to restore a backup of your newly deceased computer. -
As my question says, I am cropping out a figure exactly how I usually do it and for some reason this time it is not working. I made points with the pen tool and then moved it around with the direct selection tool (light grey pointer) and everything worked fine. I then saved the path and usually you just hold down control and click on the picture of the path next to the name and it selects it for you (marching ants) and then I select the inverse and delete the background. This time for some reason when I control and click on the image of the path, it just turns the stage completely black. When I undo it goes back to normal but everytime I try, the same thing happens. I am using Adobe Photoshop CS6 (64-Bit) By the way
Can anyone help me?? Thanks in advanceCan you show some screen captures. Ctrl+Click on a Path in the path palette should make a section from the combined path. Have your tried resetting you Photoshop preferences.
-
Can anyone help me with burning DVD with images in Aperture and picture folder. I need the to be viewable on pc and DVD player if possible.
My first attempt only works on mac.Eh la Pastenague! Je savais que tu était léthale pour l'homme mais ce sont pluôt les machines à pommes qui devraient te craindre. Merci! Solved.
For future reference.
My TC is a 3rd gen.
I actually had to reset to standard defaults not only once but twice. The first time I simply returned to my old profile but that only led to the same message error on the network settings (i.e. IP by default, cannot connect to the internet). Therefore the second time around I kept my profile as backup and re-created a new one plus a guest one.
The airport utility then signaled to issues remaining:
1) Internet access was cut - this I solved by simply reseting the cable modem
2) There were no DNS Servers - I simply copied the ones I had from the previous setup and it worked
I did have AppleCare....
I'm online again and I hope for good.
Thanks a lot
PS. a small tip - I made captures of all my settings in Network settings, Airport Utility and Network utility using Grab in case of ... if anything it is just handy to get back settings that your are missing when setting up a new configuration
Maybe you are looking for
-
Protect - endprotect in Smartform
hi what is the similar statement for protect-endprotect in smartforms please help me out. regards padma
-
"Could not complete your request because it is not a valid Photoshop document." Error
Hey, I've been getting the "Could not complete your request because it is not a valid Photoshop document." error in one of my PSDs. Here are just some notes: The original file type is .psd, not a tiff whatsoever, and the file extension is purely myfi
-
My purchased TV shows are not listed in my iTunes library....yikes!
I recently purchased season two of Flipping Out and only two episodes are listed in the tv show library. I found the rest of the other episodes in the purchased tab, but they don't show in the library. I went into my music folder and opened the itune
-
I bought a Metis 266 to replace a slow NAS I had for file sharing (its capacity was too small and I could gain a printer server with the Metis). Well, I already had the 160 GB Maxtor disk partitioned into 2 parts, one is 4 GB for the OS and the othe
-
Sum function not working properly in Crystal XI. Its showing total count of the values
We have migrated one application from .net framework 1.0 to .net framework 2 (from Visual studio 2003 to Visual STUDIO 2005). Now after migration we are facing some problem related to the sum function in Crystal report 10. It is not working properly