No pictures in the gallery N86 after failed Ovi Sh...

Tried to install Share Online, but failed. After this I can't view any pictures in the gallery, only white squares. Have discovered that Share was preinstalled. What should I do? Restore original setting will create much work, as I have RoadSync email, not Nokia.

+"... On the hard disk I stored a lot of pictures that I don't want to loose (just in case you suggest reformat/erase and reinstall)..."+
Well, this is a great opportunity to "scold" you for not having these files backed up. But let's not go there...OK? The first thing you need to do is to try and recover anything on your HD that you cannot easily replace. The best option at this point is going to boot your computer into target disk mode, connect it to another mac and copy your files. Before you try anything else, you need to do this. Then you can try repairing the "target disk" and try booting the computer again.

Similar Messages

I want to hide certain pictures in the "Gallery"so only I can see when I want. How can I do this?

I want to hide certain pictures in the "Gallery"so only I can see when I want. How can I do this?

Sometimes depending on the SD card (you set the sd card to be where photos are sent) and then place a security code on the files and photos. I know this can be done on a computer not 100% sure about a cell phone.
Another option is to have the photos sent to Picassa (going to be Google+ shortly) or Photo bucket or other web spots for photos or even Drop Box etc. this way your photos are away from the phone, and only the ones on the phone you don't care about remain on the cell
So I hope it works out ok for you.

How do the application servers connect the new database after failing over from primary DB to standby DB

How do the application servers connect the new database after failing over from primary DB to standby DB?
We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround.
Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
Oracle support provides us the answer as following:
==================================================================
Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
FAN server-side callouts can be configured on the database tier.
FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
=======================================================================================
Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
Thank very much in advance.

Hi mesbeg,
Thanks alot.
For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
        <subsystem xmlns="urn:jboss:domain:datasources:1.0">
        <datasources>
                <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
                    <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
                    <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
                    <driver>oracle</driver>
                    <pool>
                        <min-pool-size>2</min-pool-size>
                        <max-pool-size>10</max-pool-size>
                        <prefill>true</prefill>
                    </pool>
                    <security>
                        <user-name>TEST_USER</user-name>
                        <password>Password1</password>
                    </security>
                    <validation>
                        <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
                        <validate-on-match>false</validate-on-match>
                        <background-validation>false</background-validation>
                        <use-fast-fail>false</use-fast-fail>
                        <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
                        <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
                    </validation>
                </datasource>
                <drivers>
                    <driver name="oracle" module="com.oracle.jdbc">
                        <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
                    </driver>
                </drivers>
            </datasources>
        </subsystem>
If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

DOES I PHOTO ALWAYS HIDE PICTURES IN THE SD CARD AFTER YOU IMPORT THEM?

How do i do to make i photo NOT hide the pictures i've already imported from my SD card? i haven't erased them from the SD card, and i want to import them again to my external drive for space issues. BTW, how do i do this?
i' got several issues with i photo. i HAVE to use it, cause throuh the finder i don't see all the pictures from the sd card. some of them just don't show up. has this happened to anyone else? so i have to use i photo to import my pictures from my sd card everytime. i used to be a pc user, but i pretty much know my way around my mac book pro.
it's a retina, the smallest space one (256 gigas) and i take so many pictures (that's my job) it's almost full. i bought it knowing i would import all the pictures into an external hard drive, but didn't initially and now i don't know how to change the hard drive where the pictures are imported.
plus the pictures i've already imported from my sd card keep on not showing in the sd card through i photo. i still have all the original pictures in several sd cards cause i wanna import the ones i've already imported since i bought my mac book pro into my mac book pro, this time into my external hard drive. but i'm afraid they will keep on not showing in the sd card through i photo when i do it. i hope i'm making sense.
can anyone help me? thanks,
john.

thank you Old Toad. i already tried this, and it doesn't work for me, cause for some reason the finder won't show all the pictures that i took. i photo shows them ALL. i don't particularly like this application (i'd rather use the finder as i used to with PC) but i think i have to use it because of this.
Does anybody get my problem? has anybody else had this problem happen to them?
is there any way i photo show again the pictures in the sd card that i've already imported?
i just put the sd card in the sd slot in my mac book pro off course.
thanks
john

Reading pictures in the gallery

Hi, is there a way to access the pictures stored on a phone from a MIDlet app.?

Sometimes, if the right api's are supported.

When i take a picture with my ipad 2 lets say im looking to the right and i take the picture and when i go to the gallery my face is looking the other way(left)

when i take a picture with my ipad 2 lets say im looking to the right and i take the picture and when i go to the gallery my face is looking the other way(left)

The picture in the gallery is correct. The picture you are looking at before you capture it is a mirror image such as you are used to looking at, otherwise you would not be able to handle it. Look at More Like This >>>>>>>

Remove photos from the gallery

how can I remove my picture in the gallery? The one I took with the camera will not delete but
the one I up-loaded I can remove.

joei wrote:
how can I remove my picture in the gallery? The one I took with the camera will not delete but
the one I up-loaded I can remove.
Long Press on the picture. It will vibrate and say 1 Selected on the top. Press on the Menu (three vertical dots, top right side of the screen), choose Delete, then choose Delete again.
To select multiple pictures, After the first long press, just press on the other pictures to select (there will be an outline around each picture), then Menu->Delete->Delete
Alternative way to Delete, open up the picture, then press on the trash can at the top of the screen.
Second Alternative way - Download a file manager app, use it to go to mmnt/sdcard/DCIM/Camera and delete the pictures from there.
Message was edited by: Curt Terpstra

Why do I lose my desktop picture on external (2nd) monitor after going to sleep?

Sometimes, (not always) my 2nd monitor will not have a background picture - only gray - after waking up from sleep mode. Even going to System Prefs and selecting different picture, it will only stay gray. All other items that I drag to it or that were there when it went to sleep are fine, just the background picture is the problem. After restart, everything is OK.

Settings>Safari>Autofill>Names and Passwords>ON

The gallery widget and PDF export etc

Hi all,
I'm new to iBA so I have a lot of questions but I start with only two of them.
I made a Photo portfolio type of iBook, using mainly the gallery widget after the intro chapters.
Q1. Well, took some time to put it all together but now I'm close to finnish it, so I thought I had to preview how it looked as a PDF, and exported it.
Quite surpricing that only the the first image on all pages with the gallery widget was present? Is that how it should be?
I who thought the gallery widget navigations "buttons" would be converted to a link to the next image and that should get links for previous and next image and so fort, nutbut it didnt :-/
Ok I can make pages for all images, but 700-800 pages for just them doesn't seem smooth IMHO :-)
Q2. The gallery widget doesnt seem very flexable to handle both landscape and portright images att the same time, so I ended up making 2 pages for each gallery, one for landscape and one for portright mode images. What am I missing here?
Wishlist for iBA:
1. Make the gallery widget work for PDF export.
2. Make the gallery widget flexible to auto-handle landscape and portraight images. (In runtime, in landskape mode of the iPad, the landscape images are shown as much as possible, and the portright ones fit in hight with perhaps a lightgray (customable?) background on the sides, and vise versa when held in portright mode.)
/Cekari

1.) Widgets by design require a way to interact - PDFs are just 'readable', so naturally the interaction can't be used and the first image is akin to a placeholder showing where the widget is laid out. In iBA's case, I think the PDF is most useful for proofing, demo, etc. - if a valid preview is desired, either publish as preview (still limited for some examples) or share as an .ibooks file via iTunes.
2.) Layout your widgets in landscape, edit content in portrait and of course test in both. In those cases where you need a bit more control, bifurcate.
Thanks for your wishlist: As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html
New iBA users should see: Publishing With iBooks Author
http://shop.oreilly.com/product/0636920025597.do
Ken

How can i get that wallpaper picture in the new imac ad

The new Imac ad has this AMAZING picture of a multi-colored flower as it's wallpaper (maybe). Is that picture downloadable from Apple or is it part of an app/

The best I could suggest is this. It's close to what you're looking for, but not exactly:
Go to http://www.apple.com/imac/design/
Click "View the Gallery" near the top. Go to the fourth picture in the gallery. Control click, and select "Use as Desktop Picture" if you like it.

Restarting project from beginning after failing quiz

I have set up an exam at the end of my Captivate 7 project, but I am having trouble getting the performance that I need. I was hoping someone could give me some insight into achieving the performance I want.
I have been able to achieve the following:
-I am allowing the user 3 attempts to pass the quiz
-If they pass any of the attempts, the course is considered complete (and/or passed)
However, I have not been successful at getting this outcome:
If the user fails all 3 attempts, I need the course to be considered complete but failed
Our requirement is that if the user fails the quiz all 3 times, then they must retake the entire course. What I have experienced is that when the user exits after failing, when they try to retake the course, it will take them to the last bookmarked location of the current attempt (in my case, the page after the quiz results slide that lets the user know they failed). It is considering the course Incomplete (and therefore bookmarking to the end) rather than considering it Complete and Failed (and allowing them to repeat the course from a fresh start).
I have tried the following preferences with no luck:
Complete, Success/Completion Criteria: Slide views and/or quiz, with Quiz is passed or the quiz attempt limit is reached. This resulted in the user getting a "complete" status and certificate for the course, even if they failed all 3 times.
Passed/Failed, Success/Completion Criteria: Quiz is passed. This results in the course getting stuck in an Incomplete state after failure. When they exit they don't have the option to retake from the beginning and keep getting bookmarked to the last slide of the project.
Any ideas on how I can set the preferences? I was considering using the Project End Option of Looping the project, but I'm not sure how this will perform. Or maybe I need to use JavaScript to force this? We use SCORM 1.2 / Meridian LMS.
Thanks for considering,
Holly

Thanks Rod!
Your comments were very helpful. I think your advice on avoiding using Javascript to force the issue was a great tip.
Just as a follow up, I wanted to let you know what my team and I came up with upon further brainstorming. We ended up using some navigation and advanced actions to reset the course internally, without having to involve or upgrade the SCORM.
Here's the solution we are going with:
We allow the user infinite attempts at the exam (under preferences), but are using advanced actions to reset the course if the user fails three times in a row.
From the exam results page, when the user clicks the Continue button, the slide just after the results page has a conditional action that executes On Enter of the page. The action has 3 types of decisions - what happens if they pass, what happens if they fail, and what happens if they fail on an attempt that is a multiple of 3.
If the user passes the exam (if the variable cpQuizInfoTotalCorrectAnswers is greater or equal to 4), then it jumps them to a page letting them know they passed (and under preferences, the course is considered complete once they pass).
If the user fails the exam (cpQuizInfoTotalCorrectAnswers is less than 4), and it is not an attempt on a multiple of three (cpQuizInfoAttempts does not equal 3, does not equal 6, does not equal 9, and does not equal 12), then it jumps to a slide with a button we created called "Retake Exam." The button jumps them back to the introduction to the exam.
If the user fails the exam (cpQuizInfoTotalCorrectAnswers is less than 4), and it is their 3rd attempt, it jumps them to a page that has a "Restart Course" button. This button executes a big advanced action that jumps them to slide 1, resets any user variables to 0, and shows or hides and thing that became unlocked as the user progressed through the course the first time.
We set the actions up so that after 3, 6, 9, or 12 attempts, it will make take them to the "Restart Course" page, figuring by the 12th attempt they should have passed.
Just food for thought and wanted to share the solution.
Thanks for all your help!

Why does Ipad lock after failing your RESTRICTION code

Why Does the ipad lock after failing your RESTRICTIONS passcode I mean what could possibly changing restrictions have to do with people doing stuff bad on you ipad why make it lock you from your ipad tell me why apple WHY

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
As far as I know Apple haven't said. What's your definition of 'bad stuff' ? Being able to disable restrictions can potentially unhide the App Store and/or iTunes store apps, and allow in-app purchases to be made - therefore allowing purchases to be made on your account.

HT201401 I had restored my iPhone 4 but after restore my camera can't function well after take picture from the camera it's didn't display in the Photo Gallery even can't take a video record,how to solve this?and i had tried to restore again,still the sam

I had restored my iPhone 4 but after restore my camera can't function well after take picture from the camera it's didn't display in the Photo Gallery even can't take a video record,how to solve this?and i had tried to restore again,still the same
kindly reply and fix this for me
reply to my email,tq

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

Cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?

cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?

What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support

No pictures in the gallery N86 after failed Ovi Sh...

Similar Messages

Maybe you are looking for