No Playback on Songs.  No Audio on Videos

When I open Itunes I get the following message...Itunes has detected a problem with your audio configuration audio/video playback may not operate properly....
And when I click ok Itunes opens and when I double click on any song in my library or for a preview in the Store nothing happens. All other audio on my computer is working fine, provided it's not through Itunes. If I click on a video in Itunes the video starts but there is no audio. I've updated to 7.6. I can't sem to find any tab in Itunes titled Audio Configuration. I can't think of anything I've done to change any settings. I basically have no clue what's going on. I would be grateful for any suggestions.

ok well I tried that also but didnt work. Unlike the original poster (sorry forgot ID)...I after installing Itunes, cannot hear any audio at all within my computer, though(!) I can go to my audio settings (VIA audio Deck) and be able to hear sounds, through testing. So it has to do with the Itunes install cause everything was working fine prior to installing (I knew I shouldnt have!).
Any other help would be appreciated, I am using that USB turntable and it will only work with iTunes installed.

Similar Messages

  • Controlling Speed of audio and video playback ?

    Hi!
    I would like to know if there is (or will be) a way with
    upcoming Flash CS4 or even with Adobe Flash Player 10 capabilities
    (or even with Adobe Pixel Bender) to control the speed of an audio
    or video playback.
    For example being able to play some sound slower or faster
    and even adjusting audio pitch (and other audio filtering).
    It's been a while that I've been looking for this (back to
    Flash Player 6 when Flash was part of Macromedia) and with all
    progress achieved since then I hope there is some accelerate and
    decelerate feature now.
    Please let me know about it.

    More information needed for someone to help... click these links and provide the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679
    -http://forums.adobe.com/thread/419406
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    Also, H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115

  • AVI Files import audio fine, video does not playback correctly

    Premiere Pro CS4 imports my AVI file's audio, but video playback does not match up; that is, the audio will playback until finish, but it appears that the video portion only reaches the third or fourth frame of the video! All other video formats import just fine.
    This issue did not occur in CS3.
    I use Windows XP SP3.

    Thanks to everyone for your responses. I solved the problem by installing the proper codec (LEAD MJPEG).
    Now I have another problem -- when scrubbing through videos, it seems as if the audio doesn't follow the cursor. That is, if I scroll to the MIDDLE of a video, I hear audio from the BEGINNING of the video, as if I had just paused and resumed.
    What could be the problem here?? This appears to happen for DivX movies, which I actually don't use often. But still, this would be a nice problem to solve.

  • Audio and video playback stuttering...sometimes

    I'm having issues with audio and video playback stuttering at times in several applications. It's the same kind of skipping or stuttering in each application, whether it's iTunes (version 10) or YouTube or Netflix (Safari). I can also hear it when I'm just adjusting the volume via the keyboard, the "clicks" stutter.
    I'm not running anything other than iTunes and Safari at once, the iMac has 2 gbs of RAM, it's running Snow Leopard. It also will work sometimes for a while. I just can't figure out why it will work sometimes and not others. Any ideas about what the cause may be? Quicktime X have anything to do with it?

    video playback stuttering at times in several applications.
    Quicktime wouldn't work either.
    Until you max out your ram, you are pretty much stuck between a rock and a hard place.  In the meantime, make sure you have the latest versions of
    Adobe Flash Player
    Flip4Mac
    VLC Media Player
    Perian
    Movist
    I'm noticing that in general it's running extremely slowly now, even with only the browser running.
    Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.

  • Logic 9 Audio and Video sync at beginning timecode, but not in the middle of playback.

    Hey Guys,
    I'm working on a Trailer for a feature length, and my video playback is pretty screwy.
    I've double checked the video to be 23.976 framrat and set my project to that framrate, and I've done what I normally do with bitrate and sample rate. But currently my audio and video will not sync together when I start playback in the middle of my project.
    Playback works fine in the start of the project, and everything looks and sounds great. But as I'm writing and edtiting further on in the project all the audio gets out of sync. If I start the project from the beginning, then all of the MIDI for the whole piece registers as synced, and the project sounds and looks great the whole way through. The problem comes from starting playback anywhere in the middle of the project.
    I'm working with a .mov file (1:45 minutes); three .AAC audio files, and plenty of thrid-party plug-ins. 10.7.5 Mac OS X, 2.2 GHz i7 core, and 4GB m
    of memory.
    Any thoughts?
    Thank you!

    Thanks guys for the input.
    I am using an Aurora 16 via firewire
    I did change my buffer settings and that seemed to fix it but now I am at 128. I moved over to the aurora because I preferred the extra headroom. I guess I should have stuck with the apogee.
    Tonight was the first time I had the opportunity to do a full tracking session with 9. I have been doing quiet a bit of mastering with no issues. Quiet a few issues. Everything from logic quitting to it just locking up. So far.....a pretty bad experience. I wonder if it could be Snow Leopard.......

  • Will not playback audio or video in preview or project monitor

    First off i am running PP CS3 on an Imac with leapord... 4gb ram... 300 gb of free hard drive... 3.06 processor and i am having a problem with playback... i open the project i am wanting to work on and i go to playback in either window(preview or project) and it will play for about 15 secs with no problem with audio or video, and then out of nowhere the audio quits and then if i stop the playback and try to restart it there is now playback at all, only a frozen frame from where the playhead started. For now i have an external monitor i am able to view on with no problem via firewire and it is a decent temporary solution but i will not be able to do this for long... I appreciate any and all help, and if there is any more info needed to solve this problem feel free to let me know
    Thank You

    Well, if your previewing via an external monitor via firewire, that
    seems to imply that the timeline playback is in fact working.
    First question: Is this on ANY project, or just this one...that you know of.
    Second: Is there anything at this 15 second point on the timeline. Some
    different type of media than the rest, something like that?

  • When exporting separate audio and video streams, the audio drifts out of sync

    So this is my first slightly larger project in Final Cut Pro X.
    When I export my finished project (around 12 minutes long) straight to quicktime, it plays back perfectly.
    When I export using compressor, the resulting audio and video streams are two different lengths. The audio comes out a full second longer. If you try to lay them down in a program like Adobe Encore, the audio starts out perfectly in sync. Two minutes in you notice the video is slightly out of sync with the audio. By the end of the video it's comically bad, over a second out of sync.
    What's even more vexing is if I try to take the quicktime file that IS in sync upon playback, and try to convert it burn that to a dvd or blu-ray using toast, the problem re-emerges.
    I triec searching around, but most of the suggestions that came up were vauge, like, "Upgrade to a real program like Final Cut." (This was in reply to people who were using free software programs.)
    I did see one idea surface where 44 and 48 kHz sampling rates don't play well together. So I combed through my project and found all the 44.1 songs that were used, and swapped them out with upsampled versions. Nothing changed. It didn't sound like it would fix it, as people usually said it was a specific amount of frames off, not something drifting out of sync.
    So the question is, does anyone have any suggestions on what could be causing this? Thanks! :-)

    Project settings can be accessed and changed by selecting the project and pressing command-J. Then, in the inspector, click on the little gear in the lower-right hand corner to access the settings.
    Why are you trying to output video/audio separately? If the content plays in-sync when exporting a quicktime movie (using current project settings), you could try separating the video/audio using MPEG Streamclip as a second step instead of using compressor. For audio, don't change the sample rate from the project settings, and use uncompressed audio (AIFF) as the output format.

  • BUG: Playback Fails When Loading A Random Video - Firmware 1.2

    I've been looking all over on where to post a bug, and for a fix for this bug I found. Not many seem to be having this problem (I assume not many are trying to randomly play a video from a video playlist)
    BUG: Playback Fails When Loading A Random Video
    iPod FIRMWARE: 1.2
    PROBLEM (1): When pressing "Play" on a video playlist or on 'Music Videos' while the iPod is set to Random->Song, the iPod displays a white playback screen, displays song 0 of 0, empty duration bar and a duration time of 0:00/-0:00.
    PROBLEM (2): After successful playing a seleted video within a video playlist or music video list, the iPod attempts to play a randomly choosen video (HDD clicks abnormally) but times-out and returns the user to the Playlist selection screen.
    iPod MODEL: 60GB Video - Black [Bought in NOV 05]
    If anyone knows how to report a bug, or anyone else having this problem (Try it on you iPod, post your results!) let me know!

    I've been looking all over on where to post a bug...If anyone knows how to report a bug let me know!
    If you want to post a bug report for Apple to see, then this wouldn't be the place to post it (Apple employees rarely look on these forums; all other regular posters on here are just users that like to help others).
    To tell Apple about this, select "Bug Report" under "Feedback Type" on their Feedback form for iPods here -> iPod Feedback
    I hope this helps you,
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • Audio and video sticking and jumping after installing windows 8.1

    Hello, 
    I have a HP Pavilion G6 - 2292sa
    The product no is C1Y93EA#ABU
    I have recently upgraded my system from windows 8 to the windows 8.1 update. Since I updated my audio won't work properly at all. During random intervals when playing songs on itunes the song will jump and stick for a few seconds then continue playing with random jumps like this throught all the songs. When I watch a music video on youtube the audio does the same thing as it does in itunes as well as the video sticking and jumping. I have tried an audio fix I saw on the HP forums that suggested I delete the hd audio driver, hard reset then reinstall them but this didn't have any affect what so ever. This is a huge problem since I can't watch netflix, listen to songs or pretty much do anything media related. 
    Any help you could give would be really apreciated. 

    Hi Greum,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that after updating to Windows 8.1 your audio and video sticks or jumps and you have been  unable to resolve it. You have tried uninstalling and reinstalling the audio driver to no avail.
    I suggest you run The HP Support Assistant to look for updates and help resolve issues.  You also have a built in troubleshooter in Windows 8 and 8.1.
    Press the Windows key +C to open charms
    Type troubleshoot audio/video and press enter
    Follow the on screen prompts.
    If these steps have failed to resolve the issue, I suggest you do a recovery back to factory and then retry the update.
    Performing an HP System Recovery (Windows 8). You will see an option to backup your personal files during this process, if you have not done one yet, I suggest you do one now, to prevent any data loss. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
    Here is a link to a document to assist you with  updating.Updating Windows 8 to 8.1.  Please let me know the outcome.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • IPad mini will not play ANY audio or video

    My daughter's 1st gen iPad mini worked great until about 2 months ago. The symptoms are best expressed in a list:
    No audio at all. No music, no game audio, no alarms, no ringtones....nothing.
    No video will record or play. Both cameras work and can take pictures but neither can record full motion videos. Slow mo video will record (and play), but I'm assuming that is because it is actually a series of pictures and not a video...No video from the Internet or previously recorded video will play.
    Siri can't transcribe, so I'm assuming the microphone doesn't work either.
    FaceTime doesn't work.
    The oddest part of it is that the Ipad "thinks" it has full functionality. the music files "play" for half a second (no sound) then insta finish and go to the next song, in a turbo silent loop of her music collection. If you hit record on audio or video it will "begin" recording, bit actually not record anything, and in fact freezes up and requires you to leave, then close the app.
    Now, we took it to the Apple Store near us and 3 or 4 techs looked at it and all said they've never seen anything like this before. We have tried resetting it and reinstalling it as a new iPad. At the genius bar they plugged it in and did a firmware upgrade and it made no difference.
    Did I mention the warranty JUST ran out  a month before this...
    Any help at all would be appreciated....

    Try this:
    1. Close all inactive apps. Double-click the Home button and hold apps in the Task Bar down until they all wiggle then tap the minus sign to close apps. Tap the home button to return to Home screen.
    2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

  • Ipad background audio from video when multitasking

    Hello.
    This is a request if people can either feedback On their present experience or try this out themselves first and feedback.
    I have an ipad 1. When ever i try to get background audio to play from video when multitasking in another app, eg safari, from any video app including plex, airvideo, vlc,  and the original apple video app. All that occurs is that the icon changes to the ipod and a random song is played from my music library instead of the audio from the video i was watching. This does not matter if the video file is streamed or stored on the ipad itself.
    There is one slight and occasional proviso to this, as at times if the video file is tagged in itunes as 'music' rather than 'movie' or 'tv show' etc then it does on occasions work, and on occasions youtube videos will play in the background. But most of the time these aspects also dont function int he background with the ipod icon instantly replacing which ever video app icon i tried to use in the background.
    Now my sons iphone 4 manages to function correctly and always plays video in the background when multitasking.
    I have asked this question before on this forum, with no response, so booked a visit to my local genius bar. Where they checked my ipad and agreed it wasnt working as ios should, then interestingly they attempted to do the same on an ipad 2 and it failed to work in exactly the same way.  Their response was that this was obviously a fault of the ipad ios, possibly due to the ipad having a separate video app where as the iphone has video within its generic ipod app.
    I did the usual by informing apple via of this bug through the feedback system, and requested that the genius bar do the same. But having thought about this, and failed to see any other users on this forum who are also puzzled at this lack of what i think is an important function, i wonder if this means that i am the only one who likes to listen to video when im browsing, so dont need it, or wether everyone elses ipads function as ios should do, and for some reason both my ipad, and the ipad 2 tested in the shop are at fault.
    So can i request if others reading this can have a go to see if their ipad will play background audio from video when multitasking, or if the same problem occurs.
    Thanks very much this is really appreciated.

    Oops clicked the wrong button, I meant to click a 'helpful answer' as it  hard to have a correct answer to such a question.
    But thanks for the replies.
    It looks like this is a bug in ios solely for the ipad, as it does work fine on the iphone  although wonder which way the ipod touch will perform. interestingly it looks like i may also be in the minority of wishing to listen to video files as I browse:)
    Which probably means apple may never get around to sorting it, as no one else uses the function.
    Anyway thanks for the replies, if any one else wants to see the bug have a go and comment, i find it funny how I seem to be the only one to have found it to date.
    R:)

  • Does 2 firewire audio and video interface can work together  on FCP ?

    hello,
    My audio interface is a TC Electronic Konnekt 24D
    my video interface is a Canopus ADVC 110
    my hard drives are plugged in firewire too
    and I use Final Cut Pro 5.0.4
    So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
    When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
    I want to use the voice over tool with the konnekt 24D, so what should I do ?
    Does 2 firewire audio and video interface can work together ?
    If so, maybe I only have a driver problem from TC Electronic.
    But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
    thanks
    eMac G4 1,25 Ghz Mac OS X (10.3.9)
    eMac G4 1,25 Ghz 1 Go RAM DDR   Mac OS X (10.3.9)  

    The 1082 does show up as a possible input when I open
    the VO tool.
    Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
    I use my Aja box for export & external monitoring.
    All my audio sources run back into the Tascam and I
    use the analog mixer in the 1082 to monitor different
    sources.
    When I view external video, the audio follows it to
    keep sync.
    that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
    I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
    I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110)

  • Audio Follows Video greyed out

    I am working with a sequence that uses clips that were shot DVC Pro 720p 30, NTSC. Suddenly, when looking at interview content in the canvas and viewer, the sync for content from a particular reel is slightly off. I noticed under the view menu / audio playback, audio follows video is greyed out. The only options are default or built in output. At first I thought that was the proglem (can anyone tell me why it is greyed out, and if I need to select this somehow?)
    Interestingly, however, other clips in the project, shot on the same day, do not appear to have the same sync problem. What would cause the sync problem on this one reel? I did not notice the sync problem when previously working with the material.
    Thank you so much in advance.

    I seem to remember this happening before with captured material. Can someone answer the question of whether I should switch the sequence settings to the settings that I used to capture the clip originally?
    Or could the clip have been corrupted, and if yes, what to do? Or is the simplest solution to re-sync by eye? It's sort of like when the data flow isn't fast enough and sync is lost.
    Thanks to all for your comments.

  • Audio levels on an external monitor vary during playback when using HDMI audio

    I've been having issues with movie playback using a large 1080p HDMI TV.   During playback the audio level will come in strong, go faint, then go strong again, but not on any sort of pattern I could discern.   It did this on three seperate movies legally purchased via iTunes.  I get audio and video without trouble, its just the audio goes soft when it shouldn't.
    If you remember the VHS days and "MACROVISION" encoding, then you have an idea what it was doing, although it was the audio levels, not the video playback.
    Is this a fault of the system, a DRM gremlin, or something else?

    I think you may be onto something with the graphics card concept. The problem I am having only exists when I am working on an HD project. When I switched back to DV-NTSC then the monitor is fine during playback.
    Yes, I am routing my external monitor through my DV deck, which is not an HD deck - so again, that could be another weak link in the chain.
    This is the first HD project that I am editing, so obviously a few kinks still need to be worked out. My internal hard drive has 1.5 gigs of ram but I am not sure what the specs are on the graphics card.

  • Audio and video out of sync on converted AVI file

    I am trying to convert a DVD to an AVI for playback on a device. When I import the DVD and publish it as an .AVI the output audio and video are out of sync. After about an hour of playback the audio lags the video by a full second. How can I correct this problem?

    Walter0325
    If you have Premiere Elements 12 on Windows 8 and you want to rip VOBs from the DVD-VIDEO to export subsequently to DV AVI, here are the details....
    1. Do you have DVD-VIDEO standard or widescreen? Set the Premiere Elements 12 project preset manually.
    File Menu/New/Project. Set the project preset to NTSC or PAL DV Standard or NTSC or PAL DV Widescreen depending on what you have.
    Before you exit the new project dialog, make sure that you have a check mark next to Force Selected Project Setting on this Project.
    2. In the Premiere Elements workspace, use Add Media/DVD camera or computer drive/Video Importer to get the VOBs (only the ones in the series VTS_01_1.VOB. Set to a folder in the Save In: location. Check mark next to Insert in Timeline. Hit Get Media.
    3. If you have an orange line OVER the Timeline content, press the Enter key to get the best possible preview of what you have on that Timeline.
    If after all that, the audio is out of sync, then use the Command Prompt method to get the individual VOBs into a single file with all the VOBs seamlessly merged. This worked nicely for a recent user here. See details in my blog post how to for the Command Prompt way.
    http://www.atr935.blogspot.com/2013/09/pe-dvd-videoseamless-vob-ripping.html
    Please do not hesitate to ask if you need clarification on anything that I have written.
    Depending on your results, more information may be requested about the specific properties of what you have on that DVD disc.
    Thank you.
    ATR

  • Audio and video out of synchronization in iTune for Windows 8.1

    When playing back a downloaded iTunes file, the audio and video are out of synchronization a lot of the time.  The audio can be several seconds behind the video.
    How can this be corrected/fixed?
    I am running the latest iTunes software on a 3.8Ghz AMD-processor machine running Windows 8.1.

    Hi John,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides a lot of great troubleshooting tips that you can try, which will resolve most video playback issues in iTunes.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    I hope this helps.
    -Jason

Maybe you are looking for