No Player Detected for my Zen V Plus, and I don't have Windows Media Pla

I don't get it, I went to uninstall Windows Media Player , since that is what every one says is the reason my computer isn't recognizing the Zen V Plus, but I don't even have it on my computer. What else can I do? I am not so PC friendly I have to admit, I work on a IMAC at work and just barely tolerate the PC that we have at home. Any suggestions before make a trip to the Apple store and pic up an IMac and IPod?

I bought my daughter the Zen V Plus for her birthday because we were getting tired of the Sony Walkman mp3 player only playing their format (atrac3). It made it hard to get music off the net that was mp3 format. It does not convert well. Anyway, we followed the install directions to the letter. It took all day (over 5 hours) to get this set up and music INTO it.
Turns out, while Windows Media Player transfers music to the player just fine, the Creative Media Source is junk. It does NOT recognize the player so you can not transfer music to the player. The Sync Mangager just wants to add EVERY song in your computer to the player and the Creative Media Explorer doesn't know what to do. I have used Sony Connect, iTunes and Windows Media player. All require program to transfer music. Why does this tiny player need so many programs? Why not one GOOD one to organize, burn, sync? It's like non of these programs can talk to the other one. To use the Media Explorer we had to re-create a playlist we already had in the MediaSource program. Also, I miss the easy - 2 - 3 of the Sony/iTunes/Windows Media Player.
MediaSource requires like 5 steps to organize the music list the way you want it (by song, artist etc). Other programs you just click on the column title and it organizes it just like that.
?I have decided for our own sanity (lost of profanity and tears just trying to get music into the player today) that we would just use Windows Media Player 0 from now on. My only complaint about using Windows Media Payer 0 to organize and transfer music is that I don't know how to make it tell me what is already in the player when I want to add/delete or change the music around.
?Does anyone know what program has to remain on our computer to run the Zen V Plus? Can I remove the dead MediaSource? Will the player still charge without it's?

Similar Messages

My company web site said I don't have windows media player or Acrobat Reader. If I use IE It lets me in. What do I do?

My company web site said I don't have windows mediA player or Acrobat Reader. If I go in with IE I don't have any problems. What do I do?

There is a very good chance you are experiencing a problem with having both Reader and Acrobat installed on the same machine.
You need to remove one and repair (or possibly reinstall) the other. It isn't recommended or supported to have both.

Zen VPlus recognized by Vista, but not by windows media pla

Hello,
my zen VPlus is recognized by vista (in device manager it is in "Portable Devices") , I can also find it in Windows Explorer.
However, it doesn't show up in windows media player in the sync section; if I deconnect the zen and I reconnect it back, I can see the message "detected my zen" on the lower side of wmpl but I still get the picture "connect to a device" above.
Any idea ? The last firmware has been installed and I can directly copy files with Windows Explorer.

You need to install iTunes in order to install the necessary drivers.

Zen V Plus and USB Connect

Hello everyone. First off... I love the look, feel, and design of the Zen V plus. I'm hoping to eventually get to compliment the actual functionality of it. It has been a long day of hurry up and wait since I sped off to Circuit City early this afternoon for the Zen V plus. I'm just DYING to test it out, but it seems there is a major stumbling block. Let me give you a step by step run down of what has gone on since I can't seem to find a solution in the other posts I've read:
I put the installation disc and successfully installed the software on it.
After installation, I connected the zen v plus to the USB port and it wasn't long before I saw the battery symbol, complete with lightning bolt to show that it was charging. I also noticed that it was "docked", and I saw the USB symbol on the screen of the mp3 player. The button lights were glowing on and off. No problems yet...
I checked to see if you could sync songs while it charged - and it didn't recognize the player.
Around the 4 hour later mark, it DID recognize the player, and allowed me to rip and sync my Maroon 5 CD. I decided to leave and let it charge fully before making any other attempts.
I come home, and the mp3 player has been charging for approximately 6.5 hours. The lights are no longer flashing, and it has appeared to shut off, which I assumed meant it was done charging.
I unplug - attempt to turn on - and nothing. It's dead. Now...it's not being recognized at all.
I'm not good with electronics really, and never pretended to be, but something tells me the USB connection is weird. My brother owns a PSP - and sometimes it doesn't want to read *his* device either. I'm wondering if perhaps it did recognize the device long enough to give me confidence that it was charging, and then lost the usb connection at some point. (It's highly doubtful that my pc went into any sort of sleep/power save mode because there is almost always someone on the computer here.)
For what it's worth, I am using WMP 0, Windows XP (service pack 2), and have tried ALL usb ports (front and back) to get some juice into this thing. The computer just won't recognize it now. I plug it in and hit the power button, and it won't show me so much as a sign of life.
Any suggestions

I had this exact same problem. you should see a little plug on the battery when its connected to the computer, you are seeing a lightning bolt because your V Plus has an old Firmware version on it. Head to the Support->Downloads section and download the latest (..03 I think). This fixed most of the problems I was having.

Zen Stone Plus and RhapsodyT

Hi,I see that Rhapsody does not yet list the Zen Stone as a?compatible device with RhapsodyToGo. I have 2 questions. ) does anyone know for sure if it is or not 2) Does Rhapsody have plans to make work?This will detemine if I get one for my wife - since we have RhapsodyToGo?Thanks

Direct copy/paste from the specs page for your player:
Audio Playback Format:
]Audible Format 2 and 3
MP3 (Up to 320 kbps)<
WMA (Up to 320 kbps)<
WMA with Windows Media Digital Rights Management (WMDRM) 9
So that would be a "no."
EDIT: [color="#008000">Or perhaps "maybe." Creative is being schizo again on their spec pages. I believe the "with built-in speaker" models are the newest. The specs for the "Zen Stone w/..." are as above. The specs for the "Zen Stone Plus w/..." say it supports Audible 4 (which may or may not be accurate). I assume the non-speaker Zen Stones are the oldest models. If the "Zen Stone w/..." model? doesn't do Audible 4 then I doubt the older models would. Regardless, the question is still open for debate. ?

Problems running creative zen nano plus and nomad muvo on same compu

We have 2 nomad muvo mp3 players and now a zen nano plus .Have had constant problems with the media organiser .
Installed zen nano plus and selected enable smart fit to get maximum amount of songs and it worked fine but as soon as we tried to install software for the 2 nomad players it would not work smart fit for any of them.
Uninstalled everything and got the zen software in and it was running ok but then seemed to have problems and although smart fit was enabled it just copied files as the original mp3.
It then fatally crashed yesterday and I am awaiting a replacement as I had only had it for 2 days.
Is it possible to run all 3 and to be able to use smart fit on all 3 players or am I better off having just one working and using the file converter for the other 2.

<FONT face=Helv size=2>
Make sure that you have installed the MediaSource plugin for MuVo in order to get SmartFit You have to access SmartFit via the MuVo node of the Sources window in MediaSource. You won't see SmartFit if you access your MuVo via the My Computer node of the Sources window in MediaSource..
Here is what you should do to get the latest MediaSource software:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
- (Depending on your firmware)
Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource from your product download site.
or:
Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.
- Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.
- Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.

Adding Licenses for Office 365 Pro Plus and Power BI

Hello. I have one license for Office 365 Pro Plus and one Power BI license. I want to buy another Power BI license to assign to a prospective client so he can log on to my Power BI site and view Power Pivot reports in the browser. I think that I need to
purchase an additional Office 365 Pro Plus license ($12/mo) as well as an additional Power BI license ($40/mo). Is this correct?
My other question has to do with what I believe is referred to as my Organizational account. I have one for Office 365 and a different one for Power BI. That is, my logins are different for the two subscriptions. I'm not sure how this happened or even if
it's important. I have had no issues installing Office 365 on my desktop, laptop and tablet and I can upload files to my Power BI site and access them. Does it matter that my organizational accounts are different?
Finally, if I have it correct in paragraph 1 that I need an additional license for both Office 365 Pro Plus and Power BI, do I just login to the two separate organizational accounts and add a license to each one?
Thank you.
Regards
Arthur

Hi Guy. I went ahead and purchased both licenses. The Office 365 is only $12/mo so it's not a big deal.
After getting that great information from you on the other post, I contacted Microsoft support and got this issue straightened out. I did have two accounts (domains). They had me cancel my Office 365 subscriptions on the account that I purchased those subcriptions
on and then resubcribed to Office 365 on the Power BI account.
Thanks again for all of your help.
Regards
Arthur Jenkins

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

FOR THOSE WHO WISH TO RIP IN DIFFERENT FORMATS WITH Windows Media Playe

I decided to put a little something together for those who want to rip CD's in different formats and sizes.
it's rather easy. If you have Windows Media Player, but not 0, then I suggest you go here and get it.
Anyhow. 4 simple ste
ps.
STEP ONE: (just follow the pictures and red words)
Go to the Tools menu and then click on Options...
<IMG src="http://img49.exs.cx/img49/87/wmp0stephy.png">
STEP TWO:
from there, click on the Tab that says Rip Music
<IMG src="http://img49.exs.cx/img49/5079/wmp0step20ud.jpg">
STEP THREE:
choose which format you want. I would suggest WMA over MP3.
<IMG src="http://img49.exs.cx/img49/3267/wmp0step38hv.jpg">
STEP FOUR:
you're almost finished! Here, select what size of a file you want. Remember, MP3 files will be bigger, for less quality.
<IMG src="http://img49.exs.cx/img49/5739/wmp0step49mp.jpg">
now, press OK, it shouldn't be that hard to find.. LOL. now when you rip music from CD's it'll go into whatever prefrences you chose it to.
Hope that hel
ps.
If you have any questions, email me at [email][email protected]][email protected][/url], catch me on aim (leed2k3), or catch me on MSN Messenger, [email][email protected]][email protected][/url], might be some other name though.

GB only exports to AIFF files, you need to make conversions in iTunes:
http://thehangtime.com/gb/gbfaq2.html#converttomp3

I never receive my serial number for my product by email and I don't see in my product online.

How to find my information. The Adobe service is really bad for that...
I think to cancel everything !!!

Hi Rahul,
I’m ok now. I solve my problem on your chat Tuesday this week.
Thanks for your help.
Have a great day !
<mailto:[email protected]> Carole Gillant
Assistante de Direction | Coordinatrice clinique
Executive assistant | Clinic coordinator
Connaissiez-vous notre clinique-école? Renseignez-vous <http://www.epoqosteopathie.com/infoClinique.php> ici! | <https://app.cyberimpact.com/clients/4704/subscribe-forms/B4FA8F33-35EE-4035-8B24-5888D47EF 268> Abonnez-vous à nos infolettres en cliquant ici.
Did you know about our school clinic? Find out more <http://www.epoqosteopathie.com/infoClinique.php?> here! | <https://app.cyberimpact.com/clients/4704/subscribe-forms/0236388F-90FC-4D89-B310-3499CC7C7 556> Click here to subscribe to our newsletter.
<https://www.facebook.com/ecoleprofessionnelledesosteopathesduquebec> <https://plus.google.com/u/0/b/113483650816849309191> <https://twitter.com/EPOQosteopathie>
De : RahulTyagi4you
Envoyé : 30 avril 2015 06:48
À : EPOQ BROSSARD
Objet : I never receive my serial number for my product by email and I don't see in my product online.
I never receive my serial number for my product by email and I don't see in my product online.
created by RahulTyagi4you <https://forums.adobe.com/people/RahulTyagi4you> in Acrobat Reader - View the full discussion <https://forums.adobe.com/message/7497853#7497853>

VIewing web-sites that have windows media player action

Some web-sites I visit give me the message " Safari Can't Display Content on This Page Some content on this page requires an Internet plug-in that Safari doesn’t support. The application “Windows Media Player” may be able to display this content. Would you like to try?"
I have windows media player on my computer. How do I get the media player to allow me to view these pages?

Video plays for me on the site you posted.
As I suggested, install the Flip4Mac plug-in. After installing, open the preference file via System Preferences>Flip4Mac. On the Plug-in panel, 1st and 3rd boxes are checked. On the Movies panel, 1st box is checked.
Just in case, go to the Utilities folder>Disk Utility and "repair permissions" via the First Aid panel (click on your HD on the left of the window, "repair permissions" will appear on the right. Restart the computer. Try the video in Safari.
Post back

My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I n

My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I noticed that my Instagram is at 732mb and it keeps rising. Now it's at 814mb. Please help!!!!!

What is the precise wording of the message that is occurring?
Are you attempting to update via iTunes on a computer or over the air on the device?
How much free space is actually on the device?
If updating via iTunes on the computer, how much free space on the computer?

Every time I try to download a free or paid app or in iTunes it asks me for a credit card. (Which i don't have one) How can i download free apps without a credit card and not reset my apple ID? I already put in 20$!!!!!

Every time I try to download a free or paid app or in iTunes
it asks me for a credit card. (Which i don't have one)
How can i download free apps without a credit card and not reset my apple ID?
I already put in 20$!!!!!

How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
If None is not available - On your computer launch iTunes and click "iTunes Store" in the left navigation pane. Click the "down arrow" next to your name at the top right side of the page and click "Account." Enter your username and password and click "View Account" to log into your account information. Next to your Payment Type, click "Edit." Select the "None" button and click "Done." Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
 Cheers, Tom

TS2446 So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?

So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
Just a guess.

No Player Detected for my Zen V Plus, and I don't have Windows Media Pla

Similar Messages

Maybe you are looking for