No plugin settings folder for logic x!!! PLEASE HELP!
I accidentally replaced logic x's plugins settings folder while configuring a midi controller. I know have no presets for logics plugins. I've tried reinstalling logic x however it did not work. Can anyone give me any advice on the matter.
4GB of RAM
Display with 1280-by-768 resolution or higher
OS X v10.8.4 or later
Requires 64-bit Audio Units plug-ins
Minimum 5GB of disk space. 35GB of optional content available via in-app download.
Similar Messages
-
when ever i touch for example appstore it touches safari. i press home button the my phone does what ever it wants, like goes to settings and presses random stuff please help. :(
Try restarting it. If this does not work, then hard restart it which is holding the power and home button until the product ***** off. If this does not help either, plug it into the computer and restore it. Make sure you back up the device before you restore it though! Here are instructions on how to restore and back up an apple device. http://support.apple.com/kb/ht1414
-
I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???
MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter- -
I am using Mandriva Linux now.
But I am using Firefox 3.6.8, but I cannot install java plugin in it.
Can anyone please help me how to install it?The plugins folder in the Firefox installation folder doesn't exist by default. There is no default plugin in Firefox 4, so that folder would be empty and in thus not included. If you want to use that location then you need to create a plugins folder.
Did you try /usr/lib/mozilla/plugins ? -
Whenever I select iTunes It shows that it cannot open iTunes Store . What am I supposed to do for that ? Please help .
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV. -
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W. -
I have updated my 4S i phone with ios 8.1.2, while activating my iphone, i forgot my password. I am able to sign in my apple id in pc (manage my account) but not not able to sign in my i phone and message- your apple id has been disable for security reasons please help.
my apple id is with extension @ gmail.com but for activation it is mentioned that it is linked with extension of @me.comHi ulhas1frombanihal,
Welcome to the Support Communities! Because your account has been disabled, you will need to contact Apple ID account security to straighten this out.
Contact Apple for help with Apple ID account security - Apple Support
http://support.apple.com/en-us/HT5699
I hope this information helps ....
- Judy -
How to use the LAN NetStream for peer transmission, please help, write a sample code
How to use the LAN NetStream for peer transmission, please help, write a sample code
No reply, I reply, Oh
-
i have a ipod touch 2nd generation 8gb 4.2.1 im new to itunes i made a itunes account but it says i need a payment method is there anyway i can use my paypal if not is there a way to not have to use a payment method for itunes store please help ty
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Using those instructions you may also be able to select PayPal if that is allowed in your country. -
How to create authorisation object for save button please help in abap
how to create authorisation object for save button please help in abap
Hi
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Regards
ANJI -
Wlserver.exe error occur while start the web logic server-please help
hi
Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
Thannks in Advance,
Cheers,
bala...Could you please mail the errors and the WLS Version and service pack as well.
- Ramkumar -
i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
I am looking for a good development application for IOS. Please help me.Thanks.
I am looking for a good development application for IOS. Please help me.Thanks.
Xcode is required to submit your app to the App Store. So at some point (even if it is just to submit) you will need to use it.
-
We have four apple devices and one home cmputer how can i have a seprate itunes library for each device. please help!!!!!!!!!!!!!!!
How to use multiple iPods, iPads, or iPhones with one computer
Maybe you are looking for
-
Will there be any other way to Pre-Order the iPhone. Possibly at my Verizon Store, or over the phone? And help would be appreciated.
-
Crystall reports and missing icons?
Post Author: OmegaM CA Forum: General Hello I hope, that someone can help me. I have web service which i use with crystal report. If i test on local machine than i see just it has to be, but soon if i roon my web service i have problems with icons...
-
Drag Adjustment Layer to Another Image
How can I drag a layer onto another image in PSE4? Scott Kelby says "drag-and-drop Levels Layer onto one of your other open photos." I can only see one image at a time in Standard Edit. I opened 3 photos and saw them cascade as they opened; but then
-
Sort an ArrayCollection of Objects
I have an ArrayCollection where I'm storing Objects. These Objects have properties set like: var aurNode:Object = new Object(); aurNode.categoryName = value.@name; aurNode.total = value.@totalSales; I want to sort this ArrayCollection by Object.total
-
I am having real problems with the NEW iTunes software. Not recognising my devices all three of them iPhone and two iPods, no buying from the Itunes store this Xmas then.. Also not loading up after closing down, I have waisted 2 hours of my life tryi