No position management procedure could by found in Customizing for 57

Hello
I get in FTR_CREATE the error
No position management procedure could by found in Customizing for position CoCd:BPO1 ValArea001 ValCls0003 Trans.:\INTERN\0057.
But a product category or product type 57 does not exist?
I am creating a 62C interest rate swap.
Even if I assign 62C

Hi,
You need to assign a posn mgmt procedure in IMG for ValArea001 and ValCls0003.
you can do this in FSCM > TRM > Txn Manager > Gen. Settings > Acctg > Settings for Position Management > ASSIGN POSITION MANAGEMENT PROCEDURE.
Regards

Similar Messages

Sap trm position management procedure

Hi,
How to define Position Management Procedure and Assigned it for Government Securities (04I) and 01A Shares
with regards
raju

Hi,
Define Position Management Procedure:
1. For Shares: 01A - Product Type
2. For Government Securities 04I - Product Type
Path: IMG -> Financial Supply Chain Management -> Treasury and Risk Management -> Transaction Manager -> General Settings -> Accounting -> Settings for Position Management -> Define Position Management Procedure
2. Assign Position Management Procedure IMG -> Financial Supply Chain Management -> Treasury and Risk Management -> Transaction Manager -> General Settings -> Accounting -> Settings for Position Management -> Assign Position Management Procedure

Position Management Procedure--4001-60A

Dear All,
I am trying to understand how the system is valuing the positions for a Fx Foreard Transactions.The Position Management Procedure is 4001.Step 1:Rate valuation 1000.Step2:Type 7-Swap Accrual Step 3:Type 8:Swap Valuation. Can body Explain me the values for Swap Accrual and Swap Valuation.And the concept behind these two valuations. The scenario and the
Log from valuation run for 31.03.2010 is given below:
Scenario:Bye 1000 USd
         Sell 420000 INR
Spot rate of transaction:39.00/Forward Rate:42.00
New bk value excl. costs in valn crcy    2,000.000
Write-up/down relat. to PC in VC         2,000.000
Spot Rate PC/VC in Market                 41.00000
Spot rt sales/valn crcy mkt               1.00000
Total Swap from Trans. in Foll. Curr.    3,000.000
Total Margin/Swap from Transaction in VC 3,000.000-
Purchase Currency                        USD
Sale Currency                            INR
Leading Crcy in Purch./Sale Pair         USD
Foll. Crcy Purchase/Sale Crcy Pair       INR
Open Date                                11.02.2010
Close Date                               11.04.2010
Units                                    1.000000
Amount in Pur. Crcy Based on Spot Prices 1,000.00
Amount in Sale Crcy Based on Spot Prices 39,000.000
Amount in Val. Crcy Based on Spot Prices 39,000.000
Purchase Amount in Purchase Currency     1,000.00
Sale Amount in Sale Currency             42,000.000
Amount in VC from Forward Rates          42,000.000
Swap Accrual:
New bk value excl. costs in valn crcy    444.444-
Old bk value excl. of costs in valn crcy 2,000.000
Margin/swap accrual in valuation crcy    2,444.444-
Total Swap from Trans. in Foll. Curr.    3,000.000
Total Margin/Swap from Transaction in VC 3,000.000-
Purchase Currency                        USD
Sale Currency                            INR
Leading Crcy in Purch./Sale Pair         USD
Foll. Crcy Purchase/Sale Crcy Pair       INR
Open Date                                11.02.2010
Close Date                               11.04.2010
Units                                    1.000000
Amount in Pur. Crcy Based on Spot Prices 1,000.00
Amount in Sale Crcy Based on Spot Prices 39,000.000
Amount in Val. Crcy Based on Spot Prices 39,000.000
Purchase Amount in Purchase Currency     1,000.00
Sale Amount in Sale Currency             42,000.000
Amount in VC from Forward Rates          42,000.000
Swap Valuation:
New bk value excl. costs in valn crcy    50.000
Old bk value excl. of costs in valn crcy 444.444-
Write-up/down swap valn in valn crcy     494.444
Swap Rate Purc/Sale Cur                  1.05000
Market Swap in Following Curr            1,050.000
Market Swap Price in Valuation Currency 1,050.000-
Total Swap from Trans. in Foll. Curr.    3,000.000
Total Margin/Swap from Transaction in VC 3,000.000-
Purchase Currency                        USD
Sale Currency                            INR
Leading Crcy in Purch./Sale Pair         USD
Foll. Crcy Purchase/Sale Crcy Pair       INR
Open Date                                11.02.2010
Close Date                               11.04.2010
Units                                    1.000000
Margin/Swap Acc./Def. to Date in VC      2,444.444-
Amount in Pur. Crcy Based on Spot Prices 1,000.00
Amount in Sale Crcy Based on Spot Prices 39,000.000
Amount in Val. Crcy Based on Spot Prices 39,000.000
Purchase Amount in Purchase Currency     1,000.00
Sale Amount in Sale Currency             42,000.000
Amount in VC from Forward Rates          42,000.000
SWAP Rate for USD to INR for rate M:
30 days 3.5
60 days 4.0
90 days 4.5
Exchange rate 31.03.2010---41.00
Regards
Raju

Dear All,
Please help.
Regards
Raju

Position management procedure

Dear experts,
How to refresh the position management procedure in financial transaction it is posible or not.
Thanks,
Samudra.

Hi,
there is no SAP vocabulary for "refresh" PMP. Once you have fixed/posted any Cashflow you cannot simply change any criteria used for the PMP-Determination. In this case, you have to transfer the corresponding transaction/position via e.g. TPM15M (VC-Transfer) or TPM82 (Portfolio-Transfer).
You shall not change any setting within the PMP-customizing once you have entered the 1st transaction of the corresponding PMP! This will lead to inconsistencies...
Regards
Lorenz

Getting error:Absence type 100 was not found in Customizing for

Hi,
I am using the Standard workfllow for leave application, and when i am creating the request i am getting the bleow error:
'Absence type 100 was not found in Customizing for 21.10.2010'
What could be the reason, i have configured the statndard setting for leave type 100 in SPRO.
Thanks,
Krish.

Hi Kishore,
Please check the validity period for Absence type 100 configuration.
Also pass this Error message to your HR Functional consultant. It is the configuration issue and your FM have to take care of this issue.
Thanks.

Change Position management porcedure for securities after postings exist

Guys,
We use different position management procedures for securities with local and foreign currency. After posting the currency changeover by using FWKB Corporate Action we would like to go on with changing the position mgmt procedure as well. Is it possible to do so? We tried to use TPM50 Change Position Mgmt Procedure however it says posting already exist and not allows to change.
Please let me know if any workaround could be used.
Thanks,
Adina
Edited by: AdinaBen on Sep 28, 2010 7:03 AM

Hello,
Normally you can use transaction TPM50 to change the position
management procedure, but if already POSTED business transaction
exist it is not longer possible. You can reverse all postings for the position.
Another posibility would be a valuation class transfer (TPM15). This seems
the only way to change PMP if there are posted BTs.
Best regards,
Jasmine

Position Mangement Procedure--4001--FX 60A

Dear All,
I am trying to understand how the system is valuing the positions for a Fx Foreard Transactions.The Position Management Procedure is 4001.Step 1:Rate valuation 1000.Step2:Type 7-Swap Accrual Step 3:Type 8:Swap Valuation.
Can body Explain me the values for Swap Accrual and Swap Valuation.And the concept behind these two valuations.
The scenario and the Log from valuation run for 31.03.2010 is given below:
Scenario:Bye 1000 USD
         Sell 420000 INR
Spot rate of transaction:39.00/Forward Rate:42.00 2--swap 1:Liquidity
Log for valuation run on 31.03.2010
Rate Valuation:
New bk value excl. costs in valn crcy    2,000.000
Write-up/down relat. to PC in VC         2,000.000
Spot Rate PC/VC in Market                 41.00000
Spot rt sales/valn crcy mkt               1.00000
Total Swap from Trans. in Foll. Curr.    3,000.000
Total Margin/Swap from Transaction in VC 3,000.000-
Purchase Currency                        USD
Sale Currency                            INR
Leading Crcy in Purch./Sale Pair         USD
Foll. Crcy Purchase/Sale Crcy Pair       INR
Open Date                                11.02.2010
Close Date                               11.04.2010
Units                                    1.000000
Amount in Pur. Crcy Based on Spot Prices 1,000.00
Amount in Sale Crcy Based on Spot Prices 39,000.000
Amount in Val. Crcy Based on Spot Prices 39,000.000
Purchase Amount in Purchase Currency     1,000.00
Sale Amount in Sale Currency             42,000.000
Amount in VC from Forward Rates          42,000.000
Swap Accrual:
New bk value excl. costs in valn crcy    444.444-
Old bk value excl. of costs in valn crcy 2,000.000
Margin/swap accrual in valuation crcy    2,444.444-
Total Swap from Trans. in Foll. Curr.    3,000.000
Total Margin/Swap from Transaction in VC 3,000.000-
Purchase Currency                        USD
Sale Currency                            INR
Leading Crcy in Purch./Sale Pair         USD
Foll. Crcy Purchase/Sale Crcy Pair       INR
Open Date                                11.02.2010
Close Date                               11.04.2010
Units                                    1.000000
Amount in Pur. Crcy Based on Spot Prices 1,000.00
Amount in Sale Crcy Based on Spot Prices 39,000.000
Amount in Val. Crcy Based on Spot Prices 39,000.000
Purchase Amount in Purchase Currency     1,000.00
Sale Amount in Sale Currency             42,000.000
Amount in VC from Forward Rates          42,000.000
Swap Valuation:
New bk value excl. costs in valn crcy    50.000
Old bk value excl. of costs in valn crcy 444.444-
Write-up/down swap valn in valn crcy     494.444
Swap Rate Purc/Sale Cur                  1.05000
Market Swap in Following Curr            1,050.000
Market Swap Price in Valuation Currency 1,050.000-
Total Swap from Trans. in Foll. Curr.    3,000.000
Total Margin/Swap from Transaction in VC 3,000.000-
Purchase Currency                        USD
Sale Currency                            INR
Leading Crcy in Purch./Sale Pair         USD
Foll. Crcy Purchase/Sale Crcy Pair       INR
Open Date                                11.02.2010
Close Date                               11.04.2010
Units                                    1.000000
Margin/Swap Acc./Def. to Date in VC      2,444.444-
Amount in Pur. Crcy Based on Spot Prices 1,000.00
Amount in Sale Crcy Based on Spot Prices 39,000.000
Amount in Val. Crcy Based on Spot Prices 39,000.000
Purchase Amount in Purchase Currency     1,000.00
Sale Amount in Sale Currency             42,000.000
Amount in VC from Forward Rates          42,000.000
SWAP Rate for USD to INR for rate M:
30 days 3.5
60 days 4.0
90 days 4.5
Exchange rate 31.03.2010---41.00
Thankng in advance.
Regards
Raju

Hi,
Swap Accrual will divide the swap amount (forward points amount) over the period of the FX forward transaction.
Swap Valuation posts the difference between "market swap" and "book swap" as gain/loss. Market swap is determined by multiplying the foreign currency amount to swap rate at key date (till value date) and then converted using spot rate at key date. Book swap is current book swap amount (i.e. original swap amount-swap accrual- swap valuation).
Manish

Windows Patching - Error when logging in - "The Specified procedure could not be found"

Hi,
I am in the process of windows patahcing our estate with SCCM 2012 R2. All going well, except for 3 machines which have the error: "The Specified procedure could not be found" when the user logs in. I have tried to log in my self, created a new
local account (via my machine remotely), but still no luck. Have checked Event Viewer and Windows Update but cant see where it failed. Been checking the net for fixes but no luck. The machine is a Windows 7 SP1 Enterprise 32 bit, info for server if needed
is SCCM 2012 R2. I have attached the WindowsUpdate log, incase that can help? I dont want to spend ages removing previous updates (via SCCM) as I dont have the time!
Wont let me attach the windowslog!If any one can help, be great!

Hi,
Let's make clear your issue.
Did you logon these 3 computers?
Have you tried to install the Windows Update manually for these 3 computers?
If no, have a try.
If yes and the error still persists, try to
reset Windows Update components for test.
Karen Hu
TechNet Community Support

Error: The specified procedure could not be found

Apparently the password expired on my Windows 7 BETA installation. Upon restart the system notifies me and asks for a new password. After confirming the password I get the error:
"The specified procedure could not be found"
I cannot log in at this point. The old password won't let me in and I can't change it. The administrator account I found is disabled by default.
Is there any way to log in?

Okay, here is your dilemma.
You cannot login to your only account and the local administrator account is in its default disabled mode.
There is a solution, albeit totally unsupported. Go to http://www.sysresccd.org/Main_Page and download the latest SystemRescueCd. Burn a CD from the ISO. When you boot with the SystemRescue CD, you will type ntpass and hit <enter>. From there, make sure you read the screens. You will have make selections depending on how you loaded Windows 7 (clean vs. upgrade vs. dual boot, etc). Using this disk, you CAN enable the local administrator’s account and login in.
I just did the procedure using Windows 7, build 7000 with SystemRescueCd 1.1.6.
Good luck.

The definition of the READ RFC to the managed system could not be found. Pl

Hi there,
i try to setup a managed system on our Solution manager for E2E Analysis... but the Setup gave me a sort of errors
The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
and
No RFC Read User (SOLMANSOX001 or SM_SID) was found at ABAP Host=HOST sys=00 client=001 for roles assignment. Please make sure you have run the RFC creation assistant for this system, in SMSY. If a user name different from the default 'SM_<SID>' or 'SOLMAN<SID><CLIENT>' was specified in the SMSY RFC creation assistant, you need to assign by hand the following roles & profiles to the Read RFC User : SAP_SATELLITE_E2E (role), S_AI_SMD_E2E (profile)
So which documentation means the setup where is described how to create the RFC Destinations with SMSY.. Thanks
Regards
Edited by: Bjoern Bayerschmidt on May 17, 2010 5:45 PM

Hello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul

ImportError: DLL load failed: The specified procedure could not be found.

Hi,
I am new to Python. I'd like to try and connect to Oracle 10.2.0.4 database using Python. I have Oracle 10g client installed. When I try to import cx_Oracle I get the error below.
If anyone can help me how to solve this, I will be grateful.
C:\Users\milivojm>set path
Path=C:\Oracle\OraClient10g\bin;C:\Oracle\OraClient10g\jre\1.4.2\bin\client;C:\O
racle\OraClient10g\jre\1.4.2\bin;C:\Oracle;C:\Oracle\OraOdac11g;C:\Oracle\OraOda
c11g\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program File
s\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\CollabNet Subversion;C:\P
rogram Files\jZip;C:\Program Files\QuickTime\QTSystem\;D:\Python\
C:\Users\milivojm>python
Python 2.6.2 (r262:71605, Apr 14 2009, 22:40:02) [MSC v.1500 32 bit (Intel)] on
win32
Type "help", "copyright", "credits" or "license" for more information.
import cx_OracleTraceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: DLL load failed: The specified procedure could not be found.
exit()C:\Users\milivojm>dir c:\Oracle\OraClient10g\bin\
Volume in drive C has no label.
Volume Serial Number is B0A4-2659
Directory of c:\Oracle\OraClient10g\bin
21.11.2008 15:29 <DIR> .
21.11.2008 15:29 <DIR> ..
06.03.2004 03:19 108.920 cemutls.exe
27.01.2004 04:49 86.124 COREJAVA.DLL
21.11.2008 15:28 1.024 emca.bat
08.03.2004 17:15 52.552 extjob.exe
08.03.2004 17:15 52.552 extjobo.exe
07.02.2004 22:52 28.672 launch.exe
21.11.2008 15:27 659 lbuilder.bat
27.01.2004 06:47 81.948 LCSSCAN.EXE
27.01.2004 06:46 43.064 LMSGEN.EXE
08.03.2004 17:12 16.656 loadpsp.exe
06.03.2004 03:20 96.592 lsnodes.exe
27.01.2004 06:46 68.556 LXEGEN.EXE
27.01.2004 06:46 276.908 LXINST.EXE
21.11.2008 15:28 484 mkstore.bat
21.11.2008 15:27 1.149 netca.bat
21.11.2008 15:27 108 netca_deinst.bat
08.03.2004 17:59 188.416 oci.dll
08.03.2004 17:16 32.768 ociw32.dll
10.02.2004 13:13 110.592 ODBTREEVIEW.OCX
21.04.2005 04:13 864.256 oip10.dll
21.04.2005 04:05 75.500 oip10.tlb
21.11.2008 15:27 525 olsadmintool.bat
21.11.2008 15:27 546 olsoidsync.bat
10.02.2004 13:12 73.728 OO4OADDIN.DLL
10.02.2004 13:12 69.632 OO4OCODEWIZ.DLL
10.02.2004 13:12 20.480 OO4OCODEWIZ.EXE
21.04.2005 04:05 24.576 oraansi10.dll
21.11.2008 15:27 34 oracle.key
05.03.2004 19:15 20.480 OracleAdNetConnect.exe
05.03.2004 19:15 24.576 OracleAdNetConnectRCUS.dll
05.03.2004 19:16 24.576 OracleAdNetTest.exe
05.03.2004 19:16 24.576 OracleAdNetTestRCUS.dll
08.03.2004 16:39 1.909.008 oraclient10.dll
21.04.2005 04:14 241.664 oraclm32.dll
10.03.2004 16:09 749.840 oracommon10.dll
27.01.2004 04:49 688.400 ORACORE10.DLL
06.03.2004 03:16 57.616 oradbcfg10.dll
10.02.2004 13:17 386 oradc.lic
21.04.2005 04:13 102.400 oradc.ocx
08.03.2004 16:39 4.235.536 orageneric10.dll
14.03.2004 10:43 327.952 orahasgen10.dll
26.03.2004 17:11 77.824 oraimr10.dll
05.03.2004 19:14 45.056 orajmisc.dll
27.01.2004 17:16 278.800 oraldapclnt10.dll
27.01.2004 17:16 258.320 oraldapjclnt10.dll
27.01.2004 06:46 37.136 ORALXLED.DLL
05.03.2004 19:25 946.448 oran10.dll
05.03.2004 19:15 37.136 oranad10.dll
05.03.2004 19:11 33.040 oranbeq10.dll
05.03.2004 19:12 24.848 ORANCDS10.DLL
05.03.2004 19:11 94.480 orancrypt10.dll
05.03.2004 19:11 24.848 oranhost10.dll
05.03.2004 19:11 33.040 oranipc10.dll
05.03.2004 19:12 143.632 oranjni10.dll
05.03.2004 19:11 180.496 oranl10.dll
13.03.2004 03:40 74.000 oranldap10.dll
10.03.2004 20:42 33.040 oranldapj10.dll
27.01.2004 06:45 586.000 ORANLS10.DLL
12.03.2004 01:23 1.544.353 oranmemso.dll
05.03.2004 19:11 33.040 orannmp10.dll
05.03.2004 19:12 28.944 orannzentr10.dll
05.03.2004 19:12 28.944 ORANNZMCS10.DLL
05.03.2004 19:11 962.832 orannzsbb10.dll
05.03.2004 19:12 53.520 oranoncj10.dll
05.03.2004 19:10 221.456 oranro10.dll
05.03.2004 19:12 37.136 oransgr10.dll
05.03.2004 19:11 49.424 orantcp10.dll
05.03.2004 19:12 49.424 ORANTCPS10.DLL
05.03.2004 19:11 24.848 orantns10.dll
05.03.2004 19:13 28.944 oranzts10.dll
06.03.2004 03:16 209.168 oraocr10.dll
14.03.2004 20:50 147.728 oraocrb10.dll
21.04.2005 03:54 438.272 OraOLEDB10.dll
21.04.2005 03:54 1.608 OraOLEDB10.tlb
21.04.2005 03:55 24.576 OraOLEDB10us.dll
21.04.2005 03:53 131.072 OraOLEDBgmr10.dll
21.04.2005 03:54 32.768 OraOLEDBpus10.dll
21.04.2005 03:45 24.576 OraOLEDBrfc10.dll
21.04.2005 03:46 24.576 OraOLEDBrmc10.dll
21.04.2005 03:53 139.264 OraOLEDBrst10.dll
21.04.2005 03:43 24.576 OraOLEDButl10.dll
21.11.2008 15:28 483 orapki.bat
08.03.2004 17:07 1.052.944 ORAPLP10.DLL
08.03.2004 17:06 2.867.472 ORAPLS10.DLL
04.02.2004 00:10 28.944 ORASLAX10.DLL
27.01.2004 06:46 69.904 ORASNLS10.DLL
11.03.2004 21:35 483.600 ORASQL10.DLL
09.03.2004 21:46 61.712 orasrvm10.dll
06.03.2004 03:17 143.632 orasrvmhas.dll
27.01.2004 06:45 78.096 ORAUNLS10.DLL
27.01.2004 04:49 28.944 orauts.dll
27.01.2004 04:49 830 orauts.sym
08.03.2004 16:39 24.848 oravsn10.dll
03.02.2004 07:56 10.240 orawsec9.dll
03.02.2004 23:58 1.473.868 ORAXML10.DLL
30.09.1999 17:43 2.478 orclcontainer.bmp
30.09.1999 17:43 2.478 orclcontext.bmp
03.08.1999 19:00 246 orcldbserver.bmp
30.09.1999 18:10 3.310 orclnetservice.bmp
24.02.2004 13:11 57.344 OsUtils.dll
10.03.2004 19:17 60.280 sclsspawn.exe
21.11.2008 15:29 321 selecthome.bat
21.11.2008 15:28 266 selecthome.bat.oo4o
21.11.2008 15:29 55 selecthome.bat.oraoledb
27.10.2004 10:14 434.176 sqora32.dll
27.10.2004 10:16 65.536 sqoras32.dll
27.10.2004 10:16 32.768 sqresus.dll
21.11.2008 15:28 3.433 targetdeploy.pl
05.03.2004 19:17 37.084 TNSPING.EXE
21.11.2008 15:28 260 trcasst.bat
30.11.1999 12:32 145.408 unzip.exe
16.07.1998 18:36 104.448 zip.exe
112 File(s) 25.228.632 bytes
2 Dir(s) 8.552.009.728 bytes free

You have oracle 10g and python 2.6. Are you sure you installed the cx_Oracle version that is compatible with those particular Python and Oracle's versions? (It comes in several flavours so you need to be sure you installed the right one).

Netsnmpj.dll: The specified procedure could not be found

Hi guys,
I am developing with netsnmpj. I have downloaded the netsnmpj tookit from http://sourceforge.net/projects/netsnmpj/files/.
When I use the example of the netsnmpj in Eclipse, it can be compiled successfully. But when I run it, the following errors appeared.
I have added the netsnmpj.dll to the jdk location, but why it shows "The specified procedure could not be found"?
I have spent one day on this issue.
Need your help and many thanks.
java.lang.UnsatisfiedLinkError: C:\Program Files\Java\jdk1.6.0_17\jre\lib\System\netsnmpj.dll: The specified procedure could not be found
## Could not find the netsnmpj library.
## Please check your java.library.path setting.
## Currently java.library.path is set to:
## C:\Program Files\Java\jdk1.6.0_17\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:/Program Files/Java/jre6/bin/client;C:/Program Files/Java/jre6/bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Rational\Rose RealTime\bin\win32;c:\Program Files\Rational\common;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Java\jdk1.6.0_17\bin;C:\Program Files\Java\jdk1.6.0_17\jre\bin;C:\Python;C:\Ant1.7.1\bin;C:\usr\bin;C:\Program Files\Java\jdk1.6.0_17\jre\lib\System
##

It says it can't find the library. Best to believe it.
Write a stand alone app that does nothing but loads the dll. Verify that no other dependencies exist by printing the stack trace.
I have added the netsnmpj.dll to the jdk locationProbably a bad idea.

IIS Plug for WLS 6.1 SP2: The specified procedure could not be found.

I get an the following error message "The specified procedure could not be
found." in my browser when trying to use the IIS-proxy plugin on WLS 6.1 sp2
Windows 2000
Has anyone else encountered this message? Any solutions?
Regards,
Jonas Klemming

Thank you for posting your answer, and then solution! :> I was fighting
with my IIS/WLS installation last night when I was about to give up, I came
across your posting. Although I'm playing with 7, I thought I would try
reading your posting anyways, and thankfully I did. What I saw, reminded me
to look at the steps one more time and I found I wasn't forwarding the
.wlforward piece on! So thank you veyr much! :>>>>
"Jonas Klemming" <[email protected]> wrote in message
news:[email protected]..
Fixed it.
I had mapped .wlforward to iisforward.dll instead of iisproxy.dll
/Jonas
"Jonas Klemming" <[email protected]> wrote in message
news:[email protected]..
I get an the following error message "The specified procedure could not
be
found." in my browser when trying to use the IIS-proxy plugin on WLS 6.1sp2
Windows 2000
Has anyone else encountered this message? Any solutions?
Regards,
Jonas Klemming

READ RFC to managed system could not be found

I am trying to run the managed system configuration in Solution Manager for NetWeaver CE (Java) system. The step "Configure Diagnostics" fails with 1 error and 2 warnings:
[SSO] SSO setup OK
[Roles] At least one support role assignment did not succed, check details below and logs for more info
[SAPRouter] 2 entries for SapRouter configuration were added or updated to table AIDIAGPORTS
[Wilyhost Agent] Wilyhost Agent setup finished successfully with limitations. Data of at least one action is not available in Enterprise Manager(sapmd1ci.itg.ti.com:6001).
[E2E RFC] The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
[E2E RFC] The E2E Extractors Batchs were succesfully started for sapdsbxci/XD1/00 (sapdsbxci)
I have done RFC definitions for ABAP systems in SMSY transaction but this system is NW CE 7.11 (Java) only system. How do I define READ RFC for JAVA system? What do I need to do to get rid of this error above?
Regards,
Asif

Hello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul

Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (...SQORA32.DLL).

I recently upgraded from 10g to 11g and upon this upgrade, a website of mine stopped working.
It is a classic ASP website. I added a "testdatabase" page to the website to test the basic functionality of opening a connection. I've pasted the testdatabase page below. Anyways, upon running this page, I get this error:
Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (Oracle in OraClient11g_home1_32bit, D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL).
I have two other environments where I have done the same upgrade and the site works just fine. I have compared all the IIS settings in my other environments to that of the one suffering from the error. Also, in the IIS settings, I have made sure that "Allow 32bit" was checked.
D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL is actually where this DLL resides.
I have also checked to make sure the environment variables are correct.
The very first environment variable in the PATH setting is D:\app\oracleadm\product\11.2.0\client_1\bin; and there are no other references to oracle in the PATH environment variable.
I have done a google search and I've seen that people also tell me to check ORACLE_HOME to make sure it's correct. I've checked this in both of the working environments and there is nothing there. There is also nothing there in the broken environment. What should be there? If anything?
I don't know where else to look. What could be causing this error?
<%
Option Explicit
Response.Expires = 0
Response.Buffer = true
Dim conn
Err.Clear
On Error Resume Next
Set conn = Server.CreateObject("ADODB.Connection")
conn.Open "DSN=RPS11;UID=FFXQM;PWD=ffxqm6prd$"
If Err.Number <> 0 Then
Response.Write (Err.Description & "<br><br>")
Response.End
conn.Close
Set conn = Nothing
End If
conn.Close
Set conn = Nothing
On Error GoTo 0
%>

As a temporary solution, add the Administrators group to the IUSR and IWAM userids and see if that works. If it solves the problem, then it IS a matter of setting the users privledges correctly.

No position management procedure could by found in Customizing for 57

Similar Messages

Maybe you are looking for