No possibility to show field "Aux acc. assignment 1" in transaction KSB1
Hello together,
we have a strange effect in our R/3-systems.
When call transaction KSB1, we expect to show nearly all fields of the cost center line item.
Especially we want to choose the fields "Auxiliary account assignment 1" in the concerning Display variant.
We have the effect that for some users the field is offered when changing the display variant.
But for some users the field is not offered.
Do you know why there are different fields offered to chose for the display variant (in trx KSB1) ?
Kind regards
Udo
I forgot to tell you that we are using SAP R/3 Release 4.6B.
Kind regards
Udo
Similar Messages
-
How to add entries in possible fields in Account assignment model/Note 2596
Hi Friends,
I want to know How to apply OSS Note 2596, The basic requirement is to to add entries in the list of possible fields in Account assignment model( Exactly in program SAPDFKA6 in screen 120).
I found the note 2596 to achieve this, and the field that I want to add is KMZEI-PAOBJNR.
I gone through the note and it is very confusing for me .. If any one knows how to achieve this or how to apply this note, please let me know.
Thanks,
RkI got this myself.
Thanks,
Rk -
In WebI report, is that possible to show ZERO in NULL fields?
in WebI report, is that possible to show ZERO in NULL fields? crystal report has no issue, but i could not find a way to set ZERO to NULL field
can you tell?Bram,
This formula you used above is corrcet but is returning you a character '0' and when a descending sort is applied character values will be at the top.
So , apply the formula 'ToNumber' on the value returned form the above formula :-
ToNumber(above formula)
And then it will change 0 to number and give you the exact sort order.
Thanks,
Rohini Haksar -
Me21n - account assign - is it possible to add field ?
me21n -> account assign - is it possible to add field ?
is there any standart exit ?
i know about the optin to add fields in my own screen
( MM06E005 ) .
i need it becouse i can't inforce ( display message )
the user to insert value in my own subscreen .hi
I have the same requirement of adding a new field in account assignment. Please let me know if you are done with that or you have any infor regarding user-exit/BADI.
Thanks
Alok -
Hi all,
I have urgent problem.
I created PO with K (cost center) acc. assign., entered Cost center and automatically got expense account. Created GR and posted expense acc.&GRIR clearing account.
In Miro it should be vendor & GR/IR clearing and tax.
There comes problem, I get error message: "Account ### can not be posted to Cost Center".
It seems the problem is GR/IR clearing account.
It is not allowed to have assigned cost center? But actually cost center is assigned in PO with acc.assignemet?
Are there some settings that I am missing? Or wrong definition of account or something else?
Please, urgently advice.
ThanksHi,
Ofcourse I have a valuation class, that is not a problem, system see all accounts as it should. I think that the problem is with definition of account, does anybody knows which field in master data of account is controling this settings?
In any case, it is clearing account and it should not be in P&L accounts in controling?
It is not a automatic posting, nor supplement, can it be field status?
Thanks,
Anchi -
Crystal Report: Show Field only in Print-Preview
Dear Experts,
is it possible to show a field only in the print preview (when the report is generated) without printing this field?
Thanks for Help.
JacquelineNo, it is not possible to display a report object on screen then suppress it when printing.
Fuskie
Who thinks you would have to use 2 reports or use a parameter that offers the option of formatting for view versus for print... -
Is it possible to show the campaign name in the opportunity page?
Hi Everyone,
I'm wondering if its possible to show the campaign name in the opportunity page as a referrence as to which campaign the opportunity as associated with.
Thanks,
Waynethere is a Source Campaign field on oppty.
-
Acc.assignment object replaced by current master cost center for employee
Hi,
I am facing a peculiar warning message while running the payroll posting run for only 2 employees. The warning message s as follows:
"Acc.assignment object replaced by current master cost center for employee
Message no. 3G399"
Prior to this, there were an error saying the
"Account assignment objects are incorrect. No substitution is possible.
Message no. 3G209"
Later we found that the Position was not assigned to that employee properly. I later assigned the correct position.. but still during the posting run the warning message appears.
Please let me know if this is okay or is this an error which restricts the postings.
Regards,
Balaji TRYour postings will go through with the first warning message. However, please be warned that any account assignment related entries (IT 0027, 2001, 2002) will be wholly ignored.
Check if any entries have been made to different cost centers for the erroring employees. If so, check for the reason why those entries have been made (since it is evident that the configuration does not support such entries). You may need to tie in with a CO consultant to ensure that there are no loose ends. -
Acc assignment vs determination
hi,
1) acc assignment - can be in anywhere of various modules, fi, co, mm, fd. during data entry, we need to MANUALLY put in the gl account in acc assignment fields. right?
2) acc determination - define in obyc or vkoa. this will let the system to determine which transaction code like bsx, wrx to use depends on which business process. this is more to BACKEND defined as compare to account assignment. right?
3) what is the main difference of assignment and determination? can i say assignment only single gl account whereas determination will be the double entry.
hope to have clarification.
thankshi,
point given to all.
clarify the following reply.
in acct determination too you can single entry for acct determination if you dont select in the rules debit or credit.
1)what does it mean do not select in the rules debit or credit?
2) in obyc or vkoa i notice some without gl account but some with gl account. what does it mean?
In a sales transaction the cutomer is debited and the revenue account is credited. Here the sales account is determined via VKOA, as you rightly said. This is becuse of 'account determination'. However, only one of the entry is determined, the corresponding debit entry, namely customer account is not known until you do the sale.
We cannot classify strictly that 'Account Determination' will provide all theG/L accounts for the completion of journal entry. The other way is true.
3) how the system determine the sales account? i mean how can system know which sales acc to credit? do we need to enter any thing so system will know which sales account to use? any example?
4) 'the other way is true' - what does it mean?
thanks -
Order field in Account Assignment tab in Inquiry
Dear All,
What is the purpose of u2018Orderu2019 field in account assignment tab of Inquiry?
When we are running sales pricing DP81, face the error u2018reference is incompleteu2019. So, I had to give the Order no. If it is intended for Profitability segment, what is the importance to PS?
We have assigned WBS and system det. Profit centre from WBS. But, getting the error u2018Order xxxxx is a networku2019 while trying to give network no. from dropdown button.
Is there a possibility, we can suppress the Order field.
Also, where does (tcode) system pick the values for item category in sales pricing? Cause, the required determination exists in VOV4.
Regards,
Nagitem category is determine from Item Catergory group in Mat master and Sales Doc Type.
-
Is it possible to show the intraction id value in a slide?
Hi,
i made a slide in captivate and set scoring for it.
Is it possible to show the interaction id value that assigned to the quiz ( i mean the score on the slid).
ThanksObtained score or maximum score? Are those question slides or just scored objects? A slide cannot be scored.
Use system variables cpQuizInfoLastSlidePointScored or cpQuizInfoPointsPerQuestionSlide. -
Show and Share Automatically Assign Permissions
I have been looking and cannot find a whole lot on SnS permissions. Our DMS is version 5.3.11 and we are using embedded authentication. We have a setup so when a user connects to the TCS(5.3) to record a video it then automatically sends it to our MXE3500(3.3.2.0) then from there it automatically distributes it to our Show and Share and assigns it a category based on what address was dialed.
What we want to do is have group and or user permissions assigned to the categories so only those users can see the videos. Does anyone know if this is possible?
Thanks for any help!
-ScottHi
Integration with Active Directory :Cisco Digital Media Manager 5.3 provides integration with Microsoft Active Directory
via the LDAP protocol to import both names and groups from Active Directory. Cisco Digital Media Manager and Show and Share users are then authenticated against MS Active Directory during the login process. By categorizing the uses into different user group within DMM, administrator can control and manage the content viewing permission within Show and Share by associating the user group to the video during the publishing stage. There are three Authentication Mechanism available: ‘Embedded Authentication’, ‘LDAP Authentication’ and ‘Federation Authentication’ .Currently, Microsofts Active Directory is the only LDAP service that is supported. You have to choose LDAP Authentication , as the attached photo
Thank you
please rate all useful information -
Making acc assignment group mandatory in material master sales view
hi,
could someone help me how to make acc assignment group (sales org:2)in material master mandatory.just acc assignment group not other fields which comes along with it . thanks
kulandaivelHi,
For making any field in material master optional/mandatory/hide , follow the steps:
1.Just click the tab ,(Which is u want to be mandatory)and get the field name
2.Go to T.Code: OMSR and enter that field name and get Selection Group
3.1. Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type){{ ( example :;For ROH material type the Field reference is ROH)
3.2. use T.code:OMS9,, Double Click your Field Reference and select field selection Group & select round box of mandatory and save
Regards,
Biju K -
Is it possible to show the field description while users are creating workbooks. I thought there would be an option for 'tool tips' or hover-over help which may show the field description.
Hi
All versions of Discoverer do this by default.
In Desktop, the description appears underneath the Available items pane.
In Plus the description appears below the buttons New | Edit | Show | Delete. If you look closely there is an oblong shaped area below these buttons and above the main Back | Next | Finish buttons. This is where the description, or context sensitive help as I like to call it, will be displayed.
If you have not added any descriptions, in Desktop the area displays nothing whereas in Plus it will at least say "No description available".
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com -
Configure Acc Assign Cat K for Company Code Specific
Hi Gurus,
Is it possible to configure acc assignment category K Company Code Specific? Actually I configured the acc assignment category K in OME9 and set indicator assign scr = 2 (multi acc assign is active) now my client has 7 group companies. Client needs multiple account assignment for only one company code. How do I modify the category K for one company code only?
Is there any way I can do it by User Exit? If so please tell me the procedure.Is it possible to configure acc assignment category K Company Code Specific? Actually I configured the acc assignment category K in OME9 and set indicator assign scr = 2 (multi acc assign is active) now my client has 7 group companies. Client needs multiple account assignment for only one company code. How do I modify the category K for one company code only?
HI,
There is no direct assignment in between Cost center and company code. But cost centers are created under profit center of company code and the Profit center is assigned with specific company code. If you create Cost center then system will ask you to enter Profit center which is link with company code.
Take help from your FI Guys they will create cost center as you required.
Maybe you are looking for
-
Installing windows (7 or XP or 8) on to mac pro 1,1 gives gray screen
When installing windows (7, XP or 8) on to my mac pro 1,1 I just get a gray screen and the windows disk spins for a while and then stops spinning. I've tried every version of windows, 32bit and 64bit versions and retail and non-retail disks but no l
-
Help with replicating/updating vendor master data
Hi, Currently, we run the bbp_vendor_sync program to do the replication. It does the job of both bbpgetvd (new vendor creation) and bbpupdvd (update existing vendor). But the problem is, we have two number ranges for vendors. One is Numeric and other
-
There are 5 ios devices being synced to my itunes on my conputer, how do i only make my devices sync song eatings and play countback and forth? Cheers.
-
Create view produces exception
when i try "create view" by SQL / access i get the SQLException: No ResultSet was produced how to handle this? thanks gammloop
-
Portal Work Protect mode is not working properly after upgrade to NW 7.4
The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data") When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup. Instead, the portal exits to th