No Posting or Booting (K7N2), Please Help

So my friend and I each order the same mobo/processor and we're hanging out installing them.
MSI K7N2 ILSR
Athlon XP 3000
We both get to the point of trying to boot up and neither one of us can even post, let alone boot. Turns out, his system had ram in DIMM3 and when he moved it out, he booted just fine.
However, my RAM was in DIMM1&2. NO matter what 2 banks I use, or even if I try just one stick, I still can't post or boot. I just get a "NO SIGNAL" on the monitor.
I've tried it on 3 monitors and get the same thing.
I've tried my video card in 2 other PC's and it works.
I've tried other video cards in the system and still no boot or post.
I've tried using different RAM, nothing.
I've tested my RAM IN different systems and it works.
So I can eliminate the RAM, the Video Card and the Monitor. I'm wondering if my AGP slot is bad or maybe the processor doesnt work. I need input on this.
I've already tried clearing the CMOS and I've already tried switching the jumpers around to safe mode (100mhz). Any help is greatly appreciated.
***EDIT***
Upon further inspection of the D Bracket lights (top 2 red, bottom 2 green) the manual suggests the processor is bad or not seated properly. I've reseated it and the lights are in same configuration. So I'll be getting an RMA and return the processor for a new one. I ordered from same place, so I'll likely have them replace the board, RAM, Processor, and Cooling Fan. I'm sure that will take me at least a week to get. Sigh.
***EDIT***
My complete system
K7N2 Delta ILSR Mobo
Athlon XP 3000+, Volcano 10+ Cooling Fan
2*512 Corsair PC3200
VisionTek GeForce 4 Ti4600 Video Card 128MB Ram
550 Watt Power Supply, AMD recommended.

Quote
Originally posted by jvree
I RMA'd the board and the processor, just to be safe and sure neither was the culprit.
Is it possible for a fried processor to damage the mobo? I wonder if the processor was bad and could have damaged the mobo.
At any rate, both were next day air mailed out today. Hopefully get my replacements early next week. The RAM works. Tested it in 3 different machines (including one with the same mobo as I was having the problems with).
Thanks for your help everyone. This is my first MSI mobo, glad I found this site and glad people are willing to help.
Thank You for having the right attitude!!

Similar Messages

Satellite m300 won't boot! please help!

Hi,
I've got a bit of an issue here.. I have a Satellite m300.. a white one..
and it won't boot... I've had this very issue before but it turned out to be an external USB HDD that stopped it from booting up but now even with everything removed it still won't boot.
And it was fine until yesterday, it just gave up.. I am away from home for work so I have all the work stuff and unfortunately without my recovery cd, but my guess is that it won't even read it..
So this is what happens..
turn on..
all light come on.. including power and all the white lights around the keypad..
and then maybe 5 sedconds later caplock and numlock(?) green lights flash..
then it's a dead still.. no HDD activities or sound.. just dead quite..
the screen remains black blank through out..
it seems to get stuck here before reaching the post screen.
i thought the power button usually took more than just a push to turn off? it instantly swithces off with a single push of the power button..
I think this laptop is like on sleep or something and can't seem to wak up.. maybe?
And it has vista.
Please help.. I have some important work files I need to recover at least before formatting..
and that has to wait till I get home which won't be for a month or so..
which also lets me take it back for warranty as well..
any help appreciated!!!
cheers,
Min

Quote
Originally posted by syar2003
If running a LCD display with DVI connection , try to hook it up with
an analog VGA cable.
Can also be that the motherboard fails to initialize the vga AGP card.
Turn off all power incl. AC .
Disconnect all devices from motherboard : AGP/memory/drives/floppy/USB/PCI cards etc. take out the 20pin & 4pin PSU connectors and reset the motherboards
cmos .
Assemble PSU connectors ,only one DIMM module and graphics card and turn it on and se if you get a post .
Just removed all components. I reset the CMOS. I then reconnected the 20pin and 4pin, 1 stick ram, and the video card (no ide devices, no mouse, keyboard cd drives) and the monitor doesn't show up. I also tried another monitor so it isn't the monitor.
Could it have a bad AGP port?
Any other suggestions? I am thouroughly stumped. Also the power and reset buttons don't work no matter what configuaration I put the front panel connectors in. The Power LED is lit up and it doesn't work and the reset light is off and it doesn't work.
Also noticed one of my fans connected to one of the two other fan pins on the motherboard isn't working.
What a nightmare.

8800, battery symbol with red line through it. Won't boot. Please help!!!

I recently bought a 8800 and when I inserted a battery, all I got was a battery symbol with a red line through it on a dim screen. I changed batteries, tried to charge it via USB and from a wall outlet to no avail. I tried cleaning the contacts and tried uploading t a new OS, but it wont recognize the phone being connected when it actually is.    I am at the end of my rope with this phone and can't figure out what else to do. Is it just gone? Please help me
Solved!
Go to Solution.

Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

IMac G5 HD Won't Boot. Please Help.

I have an iMac G5 (Power PC) which has been running OS 10.5.8 without any issues until today.
When starting, I have a grey screen with the Apple logo, but the wheel beneath keeps turning and the computer will not boot up. I've tried to start it many times, and I just get the grey screen, etc. P.S. I do have a Time Capsule connected via Ethernet and Time Machine was active until this problem today. The TC is disconnected at this point, as I was afraid I'd lose that back up.
Here is what I tried:
I disconnected everything except the keyboard and mouse (not internet/modem/Time Capsule)
I booted from the Leopard Disk, and ran Disk Utility. Message said the the HD appears to be OK
I booted from Drive Genius and ran the following:
1. Repair-Verify: Message was that HD appears OK
2. Repair-Repair: Message was that HD appears OK
3. Repair-Rebuild: Had a few invalid volumes. Message was that the Volume Header and HD repaired successfully
4. Repair-Preferences; SAID THERE IS A CORRUPT PREFERENCE: /bin/sh:xargs:command not found (There was no way that I saw to fix this!)
5. Scan for Bad Blocks: None found
I tried to start the computer again, but I still get the grey screen, Apple Logo, and constant spinning of the wheel WITHOUT a start. It appears that the HD is not 'Dead' but has some issue, perhaps the corrupt preference listed.
So, I need help with my next step. Would any of the following work and if more than one, what order would be best?
1. Use the Leopard Install Disk to 'Restore from Time Machine Backup'? (Never have done this, so I'm clueless)
2. Use the Leopard Install Disk and 'Archive and Install' the OS? Can I do this since the HD has the updates to OS 10.5.8?
3. Use the Leopard Install Disk to Erase and Reinstall the OS and then migrate from the Time Capsule (Never have done this either)
4. AND, if none of this works, I'm assuming I could go get a new iMac and restore everything from the Time Capsule/Time Machine, even though there the OS in a new machine would be upgraded and also Intel Processor. Yes?
In any case....PLEASE HELP if you can.....and THANKS

Thanks for trying to help with this :-). I started as you suggested and here are the last few lines:
Airport: Link down on en1
Sept 19 17:49:16 jack-cohens-imac-g5 ReportCrash [52}: saved crashreport to /Library/logs/CrashReporter/securityd_2011-09-19-174913_jack-cohens-imac-g5.cra sh using uid: 0gid: 0, euid: 0 egid: 0
Sept 19 17:49:18 jack-cohens-imac-g5 ntpdate [63]: can't find host time.apple.com
Sept 19 17:49:18 jack-cohens-imac-g5 ntpdate [63]: no servers can be used, existing
Sept 19 17:49:18 jack-cohens-imac-g5 mds [32]: (error) server: mdsync Launch failed: (ipc/rcv) timed out
Let me know what this means, please. Also, I have the screen 'up', so I can give you more lines if that'll help.
Much appreciated.
Sandie

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Help! Computer turns on but then will not boot up - Please Help!

I have no idea what happened to my Apple. Someone please help me. My powerbook currently is running on no battery (recall victim) and now the entire computer is no longer functioning at all. I installed iTunes 7.0 and then the trouble began. I had to restart the computer, so I did that and then the computer just wont boot up. It goes to the grey screen which shows the Apple symbol and occurs right before my log in then just continues to read. The green light for the battery is function and nothing at all is working. The computer simply will not boot up, I have tried unplugging it for the night and then rebooting it and nothing. Please someone help, what has went wrong?

You mentioned in your other thread that you had trouble with a cpu(0) hardware error trying to use the hardware test disk. Is this the hardware test disk which came with that particular machine? If not, then you need to find the original hardware test disk that came with that machine. If the restore disks that say 12" Powerbook include the words hardware test, use those instead and follow these directions:
http://docs.info.apple.com/article.html?artnum=86287
If you are using the correct hardware test disk and you get a cpu(0) error using it, then the machine has a hardware problem.

KT4V BOOT Problems please help quick

ok
i just got everything running again, then i replaced the cup heatsync and fan.
now, everything starts up, cd roms spin up, hdd's spin up, but the monitor shows nothing at all the usb mouse does not light up.
please help me figure out whats wrong, i just cleared cmos, with no luck.
ill do it again..
my system,
350W PS
kt4v
2 hdds 20+40 gig
Radeon 9200 overclocked with huge overdone 50$ heatsync + fan thermaltake
Athlon 2100 xp tbred B not overclocked.
1 stick pc2700 ram 256MB
2 STICKS 512 pc 2100

Quote
Originally posted by Archangel4life
nope returned it today for a full refund :(
Good no money lost
[STRIKEOUT]yeah try the GeForce 4 and see what happens?[/STRIKEOUT]
darn

Mac booting problem - Please help! very, very desperate!

My mac was being very, very slow so I turned it off, then as it it was booting it was taking ages so i restared in safe mode. While booting in safe mode the black bar at the bottom goes around 2/5 of the way across and then my macbook just switches off.
Ive tried:
fsck
disk utility repair/verify
reinstalling OS X Lion
When i tried to repair, it said i needed to erase everything and reinstall the OS. Last night when i tried to it said both drives are locked so i couldnt. And now when i just tried again, neither drivers are appearing; the box is just blank.
Let alone my livelyhood on the laptop, i have thousands and thousands pictures which if lost, would genuinley heartbreak me. I have much valuable data on my laptop and i really dont want to erase all data, because me being the gigantic fool that i am, i only have one time machine back up from about a year and a half ago.
Please, please help.
Thank you!

humzasadique,
unfortunately you’ve now discovered where the value proposition lies in making regular backups — if your livelihood depends upon your laptop, that lack of due diligence is rather baffling.
Which model MacBook Pro do you have, and which version of OS X is installed on it? Do you have an external bootable drive?

My iMac won't boot up please help

Please help me. My iMac just won't start up. Thank you

Does it try at al, or no sign of anything at all?
Can you boot from your Install Disc holding c key?
Does holding Option or alt key at bootup show any choices?
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

Can't pass boot screen please help!

My macbook pro will not boot pass the apple screen. I power on and it goes to the boot screen and the loop spins like its loading but it dosent go passed this screen. What can I do? I am stuck please help.

I also have a similar issue. I do not have the ability to to boot to an install disc because the optical drive is no longer functioning. Unfortunately I do not have the ability to use a shared optical drive from another computer either. So repair permissions, repair disk, archive and install, and erase & install cannot be done.
I cannot boot to Safe Mode, which leads me to believe it has to be something with the login window itself.
Found similar case on forum and when they ran in verbose mode it returned the following:
" /System/Library/Coreservices/LoginWindow.app/Contents/MacOS/loginwindow: Login Window Application Started"
" /usr/sbin/AppleFileServer: Server crashed and exited with status 4.\n"
I understand this example is from OS X Server, however, I'm guessing this has something to do with the same process.
What should I try next? Are there any single user options?

My Macbook wont boot. Please Help!

its a new comp. and i was run the Mac OS X install disk when i realized someone did it for me earlier so i went to close it. I chose the pre-existing Mac OS X system on the comp and hit restart and the comp restarted but instead of booting up it went to a "DOS" like screen. It says:
localhost:/ root# IOBluetoothHCIController::start Idle Timmer Stopped
can someone please help me get out of this? to the main screen or to run the disk (its still in there i can't get it out!)? Please Help!!

You might try to reset the SMC and/or PRAM. I am out of options after that.

Intel iMac won't boot up, please help.

Yesterday I downloaded the iPhone 2.1 Software Update, I then lost two thirds of my contacts, I managed to get them back using the Sync System, I then downloaded the Security Update, which failed "Due to an error" and was "put in the Trash". My computer then crashed, I restarted it and now it won't boot up, it gets as far as the White Screen with the Apple Logo on it with the Spinning Bars "loading" icon underneath, it was like that for over an hour last night and I've tried again this morning and it's the same. has my hard drive gone or is there some less (I hope) final reason for this? Is there an equivalent to Windoze safe mode or similar?
Please help urgently.
Thank You

Try this qst... Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
If that doesn't help, Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
If we still don't have it, try without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.

Problem in BDC for posting an amount feild, please help

I am doing one batch upload problem. Where I have to upload data from transparent table to amount field into Tcode FPE1. My problem is that when I tried to post this field I get the message 'Field is two big for screen field'. I debugged and found out that when I post amount field (type CURR Length 13 Decimal 2) into Internal table for type BDCDATA, the field get left aligned in Fval-bdcdata field which is of 132 character long. I also tried to change the type of amount field into Char type, but then I get the error 'Enter numeric value'. If you got any idea how to post this amount filed please to pass me.
Thanks and Regards,
Shekhar

Hi Shekhar,
Use the following:
DATA:
zz_menge(16) TYPE c.
WRITE bseg-menge
   TO zz_menge UNIT bseg-meins.
PERFORM bdc_field
       USING 'VBAP-ZMENG(01)' zz_menge.
(in the example the quantity field BSEG-MENGE is posted to the quantity field in the orderposition).
Regards,
John.

HP DV4-1155SE Black Screen and Wont Boot. Please Help!

Hello all I am working on an Hp DV4-1155SE. I have tested the memory modules, the hard drive and everything else that I can take out of the computer easily. Everything works but!, The laptop will not boot into the bios or anything else. Black screen, wont boot and i have the bios file that HP supplies on the support page of the site. I have looked at the instructions that a few people have posted about re flashing the bios and that does not seem to help me at all with this AMD processor. If anyone can please offer any help at all this would be greatly appreciated.
Thank you!

I will search on int 19h....thanks.
My problem started before the bios-screen.
This is what I tried this evening:
- Disconnected all non-essential devices...no effect.
- Cleared the CMOS...system booted to OS! Screens still garbled!
- Put in an older graphics-card...No artifacts!
- Put my MSI NX6600GT (AGP) back in...screen grabled while booting. Once in OS everything
looks fine at first. Later I noticed some odd random pixels. Playing movies is working fine.
Playing 3D games results in all kinds of strange looking artifacts.
- Installed the latest NVidia- drivers...no effect.
Is my problem still MOBO related or Graphics Adapter?
Any further advice?
Thanks!

T30 boot problem - please help

1 beep then 3 beeps then 3 beeps then 1 beep upon startup.
I can hear the machine running, but the monitor is completely black - not a single flicker to be seen.
This is my daughters laptop, used mainly for surfing the net and listening to her music. If it's fixable, I'd prefer that then going out and having to buy her a new one.
Any ideas on the beep sequence? Is it worth bringing it in to a computer repair shop?
The machine was bought used about 1 year ago, so there is no warrenty. She also told me that before this happened, it was working fine. No spills, no dropping it, etc. Just one day it wouldn't boot.
Ideas?

lynn893, welcome to the forum,
according to the Hardware Maintainance Manual your beep code indicates either failed memory or a failed mainboard. As T30 systems are known to have a problem with one of the memory slots I would start by removing / swapping around the memory. Instructions on how to do his can be found in the HMM.
Good Luck
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

No Posting or Booting (K7N2), Please Help

Similar Messages

Maybe you are looking for