No PostScript Printer Description in 10.7 Lion

I have a new Mac that's running OS 10.7.2 Lion and I just installed CS 5.5 Design Premium. When I try to print to a PostScript file from InDesign, there's no PPD available so I can't choose page size, orientation, color space, etc. How do I install PPDs and where do I get them? (Why didn't Acrobat install them when it installed the program?)
Thanks.

This blog posting covers what changed in Snow Leopard and Lion. Read also about how to find and install PPD files.
Creating PostScript Files in Snow Leopard for Older Print Workflows ...

Similar Messages

Postscript Printer Description file rejected as non-compliant?

Hi,
I wish to make some local changes to my printer description. I read in the documentation, that I would be advised to use a customization file.
I have tried to use the minimal example given in that document, but my OS (SuSE 11.3, via the YaST/CUPS utilities) rejects it as "non-complient"?
This is my customization file:
*PPD-Adobe: "4.3"
*%My local customization file. Filename: custom.ppd
*Include: "default.ppd"
*%End of my customization file
The file referenced in the *Include: statement is in the same folder as the custom file (/etc/cups/ppd).
Any suggestions will be most welcome, Martin

Quite frankly, I don't know of any standard software that supports that feature of the PPD specification.
- Dov

Configuring an Apple LaserWriter 12/640 Printer to work with Mountain Lion

I have an Apple LaserWriter 12/640PS printer that works great. But since LION and now MOUNTAIN LION I cannot connect to it. Previously I had an ethernet cable going from my D-Link DIR-635 Router to a LocalTalk (AppleTalk) adapter which then plugs into the printer into it's "Ethernet" (AppleTalk or also called the EtherTalk) port.
OK now I no longer have the D-Link router, rather a new (latest 5th generation) Apple Extreme. More info: my ISP changed some things and the LaserWriter is now "set" on an IP address of: 192.168.0.123 which seems to be out of the range of my ISP allotted numbers – but perhaps I can change that manually by accessing my ISP's modem via the website / setup area??
BUT I am thinking that since I really only need to print to this LaserWriter from my one MacBook Pro running 10.8.2 Mountain Lion – could I not find either a Parallel to USB adapter or some other (USB to DIN8-"LocalTalk" port)??? I used to have some software and a cable (Parallel to DIN8) for my PowerBook back in 1994 that let me print to a parallel-port only printer back then, seems like yesterday actually…
The LaserWriter has these 3 ports: LocalTalk (DIN8 type I think); EtherTalk (not an RJ45 cable!) and Parallel.
I also have a G4-733 Mac from 2001 that can startup in OS 9.2.2 -- but I don't seem to find the Printer with that (via the Ethernet cable to the adapter to the EtherTalk port of the LaserWriter printer). This G4-733 does not have "DIN8" ports - just USB (I believe 2.0 but not certain - USB 2 came out in 1999 so I think this is 2.0 and I can check when I next boot this Mac). It also has FW400 and SCSI but don't think that helps much for printing. Ethernet RJ45 of course also.
Any ideas on what to do here. Again, it worked before via my current set-up and perhaps the key is just changing the IP address (or enabling this address via my Apple Extreme or via the ISP's modem setup via the web address).
Hope this is somewhat clear--- think I have most of the information on one page here. I can run tests, buy adapters or cables if necessary-- have enough cartridges to print another 10,000 pages at least!!
Thanks in advance.
Best regards,
Steve Schulte
Friday 8 February 2013

Hi Stephen,
Somehow I missed this topic as well. For that printer, you would attract more attention in another area (this one).
You have a number of options along the lines of what greg sahli suggested. I do not have that exact model LaserWriter, but I have successfully used a wired print server, a wireless print server, and a USB to parallel cable adapter to print from current production Macs to a similar model LaserWriter. All three options worked effortlessly. As long as yours is a PostScript printer, which it is, it should work.
See this post for details and options: Laserwriter Pro 630, Mountain Lion, and Macbook Pro

Printing EPS on a non-PostScript printer

I'm using a package that generates graphics as EPS files. I need to embed these into MS Word - no problems so far! I have a DeskJet 990CXi (a non-PostScript printer) and can't find a way of printing from Word. I installed GutenPrint this morning; it installed fine, but the instructions on how to add it as a printer did not work on my system (10.4.5) - the instructions said there'd be an "Advanced" option, but it doesn't exist on my system! Any advice gratefully received, the easier to understand, the better!

I've found a workaround (more on that later), but a description of what I wanted to do: I have MS Word and I was importing EPS graphics into it. Word (v.X) would not print the EPS graphics on my HP printer, it would just print a low-res tiff graphic that was included in the EPS file, not the high-res EPS. I'd be interested to know how I could have got Word to print the EPS on my deskjet, might be useful for the future. If I had a pure PS or EPS file I don't think there would have been a problem; I think the problem was that the EPS was embedded in a Word document. I then installed gutenprint and, on my iMac, I could not get the "Advanced" option even though I was pressing the keys described in their help file. Thank you for the info on how the behaviour has changed in Tiger. I subsequently installed usbtb and things started to look a little more promising; it could see my printer. When I tried to print, the print queue kept stopping. This morning I've deleted gutenprint and usbtb as I no longer need them: I found that I can import the EPS graphics into Pages and they are converted automatically into PDF and are then scaleable etc in Pages and print with excellent results! Interestingly, importing the converted PDFs into Word gives really poor results. So, I'm going to use Pages to create my document and print to my deskjet using the standard Mac drivers. Thank you for taking the time (a) reply to my message and (b) to read this long message!
Regards,
Graham

Printing with SMC4007ABR Print Server to PostScript Printer

I've just set up my Mac Mini in a new network configuration, with an old SMC4007ABR router/print server printing to my Ricoh Laser AP2100 printer, using IPP printing and the configuration for a Generic PostScript printer, which had worked for this printer in previous setups. I am using the IP address of the router, 192.168.2.1, and the queue name specified in the documentation "lpt1". When I log into the router to view the status page it says the printer is idle and ready. When I submit a print job, I get the message "Network host '192.168.2.1' is busy; will retry in 30 seconds...".
I have tried deleting the printer queue and recreating it, using the queue name with upper case, using the queue name specified for use with Windoze ("LP"), changing the router configuration from DHCP to manual IP assignments and back again, resetting the print system from the Printer Setup Utility, using the CUPS interface at http://localhost:631/ to modify the printer setup in any sane way I could think of. I have looked at anything I could find in this forum that seemed relevant, but haven't found anything to try which I haven't tried. I have tried the SMC technical support system, but the router is no longer supported by them, but by another firm which charges per incident, and doesn't support Macintosh.
I would appreciate any suggestions from people who know idiosyncracies of this router, or who have fruitful insights into this strange behavior. Clearly my Mini sees the printer queue, but not well enough to be able to transmit data to it. Thanks for any insights you can offer.
Regards,
Geoff
Mac Mini Intel Mac OS X (10.4.8)

Thanks very much for your response. It seems I was ignoring the answer in some of the posts I was looking at, having misjudged that they were applying to a different sort of situation. I can't even remember what set of instructions from years ago established such a strong prejudice that I needed the IPP protocol. In any case, I'm grateful for your help.
Best regards,
Geoff
Mac Mini Intel Mac OS X (10.4.8)

Cannot Print after upgrading to Mountain Lion

I can not longer print since upgrading to Mountain Lion 10.8.2. Prior to the upgrade I was printing; now, even though my printer is on the list (HP Officejet 7410xi, All-in-one) as being compatible, I still get "Power PC applications are not longer supported". On HP's website there was no help since the ML Upgrade contained the necessary drivers to print with. Any help or suggestions would be highly appreciated. Oh, I am new at this...so, please...KIS (Keep It Simple). Thanks!

I have a very similar problem that this solution has not fixed.
My HP 882C was no longer supported when I upgraded to Mountain Lion. I worked around for awhile through Windows that I have running on the Virtual Machine. Then, that went south.
So I now have a HP Officejet 6700. I've unsuccessfully tried to install it as a wireless; it kept hanging trying to creat the print queue. Now, I've connected it via the UCB and still can't get it installed. I did what you've suggested here. After deleting the files and downloading and installing the software from Apple I rebooted the system. It recognized that there was a printer and began setting up the 'HP Officejet 6700...'. It began processing with the message "Finding software..." displayed. Then it stopped with the following message:
"Can't install the software for the HP Officejet 6700 because it is not currently available from the Software Updaye Service."
I've also downloaded the software from HP several times, not succeeding there either.

Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2. Every time I try to perform a Test print I get an Error msg. I'm using driver version 1.3.0.261

https://discussions.apple.com/message/23765195#23765195

HP laserjet M1120n MFP printer not functioning properly with Lion

After installing this printer it will scan but with some flaws in the scanned image and it will not print at all.
All that it displays is that there is an error after attempting to print. I'm wondering if there is some special driver that I need?
The printer is about 4yrs old.
Thank you

Your printer should be supported in Lion. Check to make sure you have the latest drivers installed. Make sure the driver for it is selected in the printer list.
You might try deleting the printer and reading it once the latest driver and software is installed.

How to set up postscript Printer for printing graphics

We have a requirement to print Structured graphics. I found out that we need to set up a postscript printer for it. After debugging I found out that the Device Type name should be either GRAPHICS or POSTGR or ZGRAP.
How can we set up such a printer?
Thanks in adv.

Hi,
The Device Type names that you have provided are not listed in the SAP Central Note for Printers/device Types
https://service.sap.com/sap/support/notes/8928
However, you can again re-check this note with your printer model and check what suitable device types should be used. As you will find inthis note:
"Device type definitions are stored completely in tables and can be individually adapted, modified or enhanced. If SAP performs such an adjustment for a customer, it constitutes a consulting service, and is generally charged seperately"
SAP has now released the SAP Printer Vendor Program - https://service.sap.com/sap/support/notes/1130927, printer manufacturers can develop and release device types for their printers.
https://service.sap.com/sap/support/notes/1100779 contains a list of all participants
Information about the support for new printer models is contained in the "Printer Vendor Wizard Note" of the relevant manufacturer. A complete list of all "Printer Vendor Wizard Notes" is available in Note 1097990. If your printer model is not listed in one of these "Printer Vendor Wizard Notes", proceed as described in Note 1103826.
- Regards, Dibya

PageMaker 6.5 set default PostScript printer for PDF export

My boss uses PageMaker 6.5 and it appears when she uses the Export to PDF option it is selecting a PostScript printer at random and asking it to "print to file" to create the PostScript file that it later gives to Distiller to create the PDF. The problem is, she has a "virtual PDF print driver" installed that is not unlike the Adobe PDF printer driver, except it either doesn't support "print to file" or maybe just doesn't like something about the way PageMaker is using it. It works great from other apps, but not PageMaker. Anyway, is there a way to force PageMaker to use a specific PS printer for this, instead of picking the first one it finds? I thought it might be alphabetical order based on driver or printer name, or port name, but I've tried changing all of those, and no luck. I did install a new PS printer, and that worked for a bit (so I assumed it was using the most recent printer installed), but now it is selecting the virtual one again, and not working... not sure why.
If she sets the default printer to Adobe PDF Printer (she has Acrobat 9), it uses that one, and everything works fine. She doesn't want to use that for her default printer though, and the printer she wants as her default isn't a PostScript printer, so PM doesn't try to use it.
Maybe a registry setting or something? Or someone that can confirm the order that PageMaker looks for a printer to use, so that I can maybe trick it in to using a specific one?

If it wasn't my boss, I'd just tell her to do that. She's been using PM for many many years, and hard to retrain yourself. Of course, this might be the best option. Seems like a weird design to "pick a printer at random" though, so hoping someone knows of some hidden option to force a specific printer.

Postscript Printer and PDF

hi,
We have a kyocera printer and want to use ADS. The ADS works fine. FP_TEST_00 shows no error.
It seems to be alright when i preview the PDF. But the printout shows only code.
It´s like this:
%!PS-Adobe
save
% simple drawing functions
/edge {/y2 exch def /x2 exch def /y1 exch def /x1 exch def .......
...........etc.
I found this entry at the SAP library
https://help.sap.com/saphelp_nw04/helpdata/en/bb/db03b04a3011d189490000e8323c4f/frameset.htm
So i tried to configure the printer as a postscript device as follows:
- I changed the Print Type in XDC to postscript (ps_plain).
- In SPAD i changed the printer driver at the devicetypes to "PostScript printer driver".
- I activated "Postscript-Formatting" for G_RAW (which is used by the device type).
But nothing was changed on the printout. It just prints out raw Postscript code (or something like that).
Has anyone an idea what to change to get a working printout? there is no error Message or Dump. SP01 says everything is alright. ADS is also working fine.
T. Nagel
Edited by: Tobias Nagel on Feb 13, 2009 10:53 AM

Hi Nagel,
I am facing the same issue printing PDF from Spool. I was asked to use PostScript printer. we have the device type set as postscript but I dont think it is printing. its prining only postscript charaters..
any idea?
Thanks,
Ram

Where do I find the Adobe pdf 9.0 printer description file and how do I install it?

Where do I find the Adobe pdf 9.0 printer description file and how do I install it? Operating system is Windows 7 and I have Adobe Creative Suite 5.5 installed. Adobe Acrobat X Pro just updated to version 10.1.8

Hi. Thanks for the replyl
I'm in prepress, working mainly with Quark XPress for advertising files and with Word, Photoshop, everything, for many years. My older computer is the workhorse with Quark 6.5 and CS4 and OSX 10.4.11. Everything is set up for me to produce PDF x1a files by printing .ps files from Quark and Word, and InDesign.
My newer computer, OSX 10.9.4, must now be used to a greater extent. So I have Quark 9 and 10 and now Creative Suite for the Cloud. But I don't have any Adobe PDF printer which I select when I print .ps files and place into my Distiller Watched Folder. I by pass selecting the Adobe PDF printer in Word and just print straight to .ps. The .ps file just sits in the Watched Folder and no longer flows into Distiller, processed and out. Is this the way of the future? I just want a smooth, fast flow for PDF's. I want them to be PDF x1a compliant for hi-quality printing.
Thought you might help to give me info as to how one uses Distiller (or not) with the new operating system and latest programs. Can't seem to find any info as of yet by searching the Adobe FAQ's and the Internet in general.
Thanks alot.
Larry Winer

PDF files scanned at B & W print to an HP 2055dn Postscript printer as white on black

PDF files scanned at B & W print to an HP 2055dn Postscript printer as white on black. Non postscript printers print the same file correctly. This is the case with three different scanners. Scanning the same sheets into greyscale prints fine with all printers.
HP claims it is not a problem with their printers. Someone from Fujitsu (makers of Scansnap) said to "
Verify that Advance Emit Transfer (print correction function for the Mac print table) is unchecked. Go to Print > Advanced Emit Transfer Function and click to uncheck. " but I can't seem to find anything like that at all.
I really prefer to scan in B & W, as I have to scan several hundred pages and the resulting file is both smaller and higher quality than the grayscale files, but I can't print them at home; I have to use the printer at work and that really isn't appropriate.

Hi,
Can you try some experiments please - or tell us if you have tried them.
1) Load a new image (one that hasn't been saved before) into the editor and without saving it, try printing from the editor. It is important that PSE hasn't saved it.
2) Load any image into the editor and do a Save for Web (you may have to reduce the size) in JPG format and see if you can print that JPG either from PSE or another program.
Please let us know the results.
Brian

Crystal Reports 8.5 and Barcode field on Postscript printer

Hi, I have a Crystal 8.5 document with a barcode Code128 inside (Azale font). If I print the document on a PLC printer using Azalea Truetype font the Barcode are printed. If I print the document on a PostScript printer the barcode are not printed. If I change font with PostScript version and I print on a PostScript printer the barcode are not printed to.
If I print the same document with Crystal 2008 the barcode are printed in both case.
There are some problems in Crystal 8.5 for Postscript print ?
thanks Filippo

Could be, all I can suggest is you go to the download page and install all patches available for CR 8.5. Click on the Businessobjects tab above and the Crystal Reports and then the link to get downloads.
IF that doesn't resolve the issue you may want to get the latest print drivers for your printer. If that still doesn't fix the problem then you have no option but to upgrade and try again. Cr 8.5 is 10 years old, no new updates available now.
Thank you
Don

Install Non-postscript print on Solaris 10 x86

I tried to setup a print queue on solaris 10 x86 for a Brother HL-1230 non-postscript printer which attached to Linksys EPSX3 print server parallel port 1 (L1).
The network configuration as followed:
EPSX3: 192.168.2.250
Solaris box: 192.168.2.170
/etc/hosts:
192.168.2.170 neptune
192.168.2.250 epsx3
I used the printmgr to setup my print queue. In the destination field I typed epsx23:L1 and pick up the printer drive by model number using ppd file.
I'm able to use the print queue to print text file, eg. /etc/hosts.
However, I didn't get any ouput from web browser. When I print from the PDF viewer, it complained there is no supported postscript printer.
Did I do something wrong in the setup? When I used the lpstat -p command to see the print queue status, it return nothing. Is there anything wrong with the print server daemon?
Thanks.

Hi I have one more doubt, if you can help-me.
I set PATH like this:
#PATH=/usr/local/bin:$PATH; export PATH
and work, but if I restar the machine I need do set PATH again: #PATH=/usr/local/bin:$PATH; export PATH.
Have any way to save this?
And I have the same problem with:
#BOOST_ROOT=/xtras/boost_1_34_1
Thanks#

No PostScript Printer Description in 10.7 Lion

Similar Messages

Maybe you are looking for