No Power Adaptor--How to Restore

I was trying to restore my old IPOD mini to factory settings. My problem is, in the second step I need to plug the Ipod into the power adaptor it originally came with, however I have lost it over the years. I really don't care if it is restored anymore, I just want to get it working again but can't because it is stuck with a display on the screen of a power adaptor (which unfortunately I do not have). Is there anything I can do to make this display go away and get it working again?

Connect the iPod to a 6-pin FireWire port on a computer, or its power adaptor, or a car adaptor, or a unit such as the iPod Hi-Fi, or try using this method to charge the iPod. If there's a retail Apple Store nearby, they will likely charge it enough for free if it's brought in as well.
(47762)

Similar Messages

Ipod shuffle 1GB Re: how to resurrect a dead shuffle? Nov 5, 2008 4:42 AM (in response to Ipod shuffle 1GB) there is no sound cant find in Itunes not in showing in drive's list please tell me how to restore or reset red light showing when try to power on

Ipod shuffle 1GB
Re: how to resurrect a dead shuffle?
Nov 5, 2008 4:42 AM (in response to Ipod shuffle 1GB)
there is no sound cant find in Itunes not in showing in drive's list please tell me how to restore or reset red light showing when try to power on or conect with USB....
If you can plz help to fiX it
thanx
intel pc , Windows 7, core 2 Dule Core

Here is the answer: go to http://support.apple.com In the search box at the top left type in the number 304996 and hit enter. This will bring you to a page with 4 solutions. Click on solution number 1 and follow the instructions. This should fix it.
bigdogdan

Satellite Pro A10 - How to restore Power Management

I'm running a little-used Satellite Pro A10 as a substitute for a sick desktop, and in trying to improve the performance after installing some essential software.
I seem to have accidentally disabled the Toshiba Power Management function - when I click on the icon on the Toshiba Console there is no response.
The Power Management seems to be retaining its previous setting, though, but I'm left with no control otherwise.
Any advice on how to restore this function on the Console?

I am not familar with the Pro A10 as the Laptop I have is A100-033 :
1>> START >> CONTROL PANEL>> SELECT POWER OPTIONS ICON
2>> CLICK ON THE WHERE IT SAYS >> CHANGE WHEN THE COMPUTER SLEEPS
3>> CLICK ON THE WHERE IT SAYS >> CHANGE ADVANCED POWER SETTINGS
4>> BY CLICKING >> RESTORE PLAN DEFAULTS << This may solve your problem....

I've lost internet connection after a power outage; how do I restore?

I've lost internet connection after a power outage; how do I restore?

Check with your internet provider for help. Your modem or router could have been damaged if they did not come on after the outage. If your modem and router look OK all you should have to do is restart your iMac.

Any ideas about how to restore old appearance on my iPhone? I just updated to IOS7 and really dislike the new appearance. I have to log on to see percentage of power used since I can't see it on my opening screen. I also want the gray folders back.

I just updated to ios7 and do not like the redesign. I want the old design back. Has anyone found out how to restore the old appearance. I do not understand why the change. I now have to unlock my phone to be able to check my battery level because my screensaver has a light color in the upper corner and I can't read the text. I want the gray panel back.

See Recover your iTunes library from your iPod or iOS device.
tt2

IPOD Touch pausing when power adaptor cut off

I listen to my IPOD Touch in my car using an Apple power adaptor. With my two previous IPODs, when I turned off the car, cutting power to the IPOD adaptor, the IPOD would pause, allowing me to resume play from that point when I returned. But my Touch keeps right on playing and I have to manually pause it before getting out of the car. Is there a setting that will make it pause when it loses external power?

Place the iPod in Recovery Mode and restore via iTunes.
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

How to Restore Factory Settings on a Mac?

How to Restore Factory Settings on a Mac OS X 10.6.8?
I have been told you can do this without the Installation CD. I also do not remember the installation CD when i got the laptop. If it's possible then please someone let me know! if not then how can i get a new CD to do this?
my computer keeps freezing on me at random times, and i have tried taking the laptop to my college tech support and also Best Buy and they said they can't do anything and that i need to try resetting the mac.

You may not remember the installer disks but they came in the box. Your profile shows you are running 10.6.6 Snow Leopard. To restore back to factory settings you need those disks. That said to go that route may be unnecessry. Stay away from Best Buy tech people. They know nothing. Without the disks you do a repair disk to see if that helps:
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt type:
/sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
Your computer should start up normally and allow you to log in.

Power adaptor and battery HOT!

This is the message I sent to Apple a few minutes ago. Maybe some of you can have some answers as well. Thanks!
"Dear Apple,
First of all, I would like to kindly express my apologies for using the feedback form to send you some thoughts about my MAC. I did not know who else to address to.
I have bought my MAC in September 2009, through the Apple Store online. It has been delivered in Norway, where I am living in the present.
Unfortunately, I have never been very satisfied with it, due to two main issues.
First, I have noticed a problem with the battery and power adaptor since the very first day. They are both heating up very fast, after just some minutes, and then the mac is really, really slow (even if I have just one open application). I have tried a few times to go to a service provider in Oslo, but they said it's working fine. The first time I had a visit with a service was in the first week after I bought it. Then, when I had this screen problem, so I took advantage and I asked them to check again the battery (they had it for a week or two). They said it was fine. A few weeks ago I visited 3 different services with the same issue - no problems found.
Of course one could say that this is the proper way of working of a mac, but how can a mac work so slow when they all say it is so fast? I have asked around and none of my friends had a similar problem, since they've purchased it.
I decided to write you now due to the fact that a few days ago I had to use a friend's mac for some hours (which is older than mine, a simple MacBook; plus, he uses it much often than me). It was working perfectly! Not at all slow, no heating.
Then yesterday I had my power adaptor plugged in for half an hour - then I saw that the mac was not charging (how come?). When I touched the power adaptor, I literally burned my finger. Of course I got scared as well. I tried to change the power adaptor with another one - it did not get so heat up, but the battery of the mac was still burning, as usual. I used to keep my old PC in my lap, with the mac it was always impossible, unfortunately.
With lots of regrets I am writing this message. I have never felt that I had a 'real mac', like the other friends of mine, although I was so excited in the beginning. I sincerely hope that I am a unique user.
Now I am planning to sell it to someone (I don't think I can get even half of the price now, since it is pretty old) and get back to some usual PC. With all the regrets in the world, again, because some of the features were indeed really cool (like the trackpad, for eg).
Thank you for reading this! Good luck with your future products! And may God rest in peace Steve Jobs, I hope the business will not be affected.
Best regards,
Cristina Moldovan"

45W is definitely not correct for any 15" model. Here are the correct model power adapters:
http://docs.info.apple.com/article.html?artnum=75448
Yes it can hurt and potentially create a fire hazard if you use the wrong adapter. Get the correct one.
As for the display resolution the 867 Mhz TiBook was released on this release as a:
http://support.apple.com/specs/powerbook/PowerBookG41GHz-867MHz.html
1280 x 854, 1152 by 768 supporting display. Check the inside of the machine's battery bay to verify it is an M8858LL/A. If it isn't then this might be a bit of a Frankenmac.

How to restore Ipod database without iTunes?

Hi,
My iPod mini is visible to any aplication except iTunes. I have tried all it sugested on the manuals to fix it and nothing worked.
Others applications like RealPlayer and Anapod can see that the iPod is connect but can´t show its content. RealPlayer says that the database file doesn´t exist or is corrupted.
The only way I can see my files is accessing the iPod-Control directory using windows.
If I disconect it from the Pc I can´t see the musics that are on it.
I have made a copy of the songs that were on it and now I want to know how to restore it without use iTunes, because nothing makes iTunes see it.
Is there any update link that still work on apple website, so I don´t need to use iTunes?
I need to restore my iPod without iTunes because unistall, check register, restarts,... did not work.
The only way I can see the iPod is runing the diadnosis under the help menu. Nothing have worked to make it be showed as device.
That is what the diagnosis show:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Hewlett-Packard HP Pavilion b1000br(EN469LA)
iTunes 7.0.2.16
iPodService 7.0.2.16 is currently running.
iTunesHelper 7.0.2.16 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskSAMSUNGHD160JJ________________________WU100-33, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
SiS 7001 PCI to USB Open Host Controller, Barramento PCI 0, dispositivo 3, função 0. Device is working properly.
SiS PCI to USB Enhanced Host Controller, Barramento PCI 0, dispositivo 3, função 3. Device is working properly.
No IEEE 1394 Host Controller found.
Connected Device Information
RACHEL'S IP (G:\), iPod mini running firmware version 1.4.1
Serial Number: JQ521620S45
Bus Speed: 61440
The last connected iPod serial number: JQ521620S45.
The iPod Service Logging Information:
[SERVICE: 0x97C,20:58:33 INFO] Started C:\Arquivos de programas\iPod\bin\iPodService.exe (Tue Feb 06 20:58:33 2007)
[SERVICE: 0x97C,20:58:33 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0x9A8,20:58:34 INFO] Timed out... Starting device manager!
[SERVICE: 0xA04,20:58:35 INFO] Listener Window created
[SERVICE: 0x9A8,20:58:37 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x9A8,20:58:37 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x9A8,20:58:37 INFO] device is an iPod
[SERVICE: 0x9A8,20:58:37 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x9A8,20:58:37 INFO] [-1] set waiting to mount = 1
[SERVICE: 0x9A8,20:58:37 INFO] [1] Assigning session 0
[SERVICE: 0x9A8,20:58:37 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x9A8,20:58:37 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x9A8,20:58:37 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0x9A8,20:58:37 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x9A8,20:58:37 INFO] [1] input #0 from src #0
[SERVICE: 0x9F4,20:58:37 INFO] [1] input #0
[SERVICE: 0x9F4,20:58:38 INFO] [MACHINE 1 INPUT #0] - (HDW) Interface Arrival
[SERVICE: 0x9F4,20:58:38 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0x9F4,20:58:38 INFO] [1] progress is now 2
[SERVICE: 0x9F4,20:58:38 INFO] [1] progress is now 2
[SERVICE: 0x9F4,20:58:38 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x9F4,20:58:38 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x9F4,20:58:38 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x9F4,20:58:38 INFO] VendorId: Apple
[SERVICE: 0x9F4,20:58:38 INFO] ProductId: iPod
[SERVICE: 0x9F4,20:58:38 INFO] revision: 1.62
[SERVICE: 0x9F4,20:58:38 INFO] vendor bytes:
[SERVICE: 0x9F4,20:58:38 INFO] 02 01 00 00 00 00 00 00 00 07 00 02 92 00 00 00 00 00 00 00
[SERVICE: 0x9F4,20:58:38 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x9F4,20:58:38 INFO] [1] Power State: Powered
[SERVICE: 0x9F4,20:58:38 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x9F4,20:58:38 ERROR] Did not find first letter of stage
[SERVICE: 0x9F4,20:58:38 INFO] [1] serial number 000A27001438703A
[SERVICE: 0x9F4,20:58:38 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x9A8,20:58:40 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0x9A8,20:58:40 INFO] looking up device # for \\.\G:
[SERVICE: 0x9A8,20:58:40 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x9A8,20:58:40 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0x9A8,20:58:40 INFO] [1] set waiting to mount = 0
[SERVICE: 0x9A8,20:58:40 INFO] [1] input #1 from src #0
[SERVICE: 0x9F8,20:58:40 INFO] [1] input #1
[SERVICE: 0x9A8,20:58:40 INFO] looking up device # for \\.\F:
[SERVICE: 0x9A8,20:58:40 INFO] type 0x2 drive 0x2 partition 0xffffffff
[SERVICE: 0x9A8,20:58:40 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 2
[SERVICE: 0x9A8,20:58:40 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x9A8,20:58:40 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x9A8,20:58:40 INFO] looking up device # for \\.\E:
[SERVICE: 0x9A8,20:58:40 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0x9A8,20:58:40 INFO] looking up device # for \\.\D:
[SERVICE: 0x9A8,20:58:40 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x9A8,20:58:40 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x9A8,20:58:41 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x9A8,20:58:41 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x9F8,20:58:41 INFO] [MACHINE 1 INPUT #1] - (HDW) Volume Mount
[SERVICE: 0x9F8,20:58:41 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x9F8,20:58:41 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9F8,20:58:41 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x9F8,20:58:41 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x9F8,20:58:41 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x9F8,20:58:41 ERROR] Did not find first letter of stage
[SERVICE: 0x9F8,20:58:41 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x9F8,20:58:41 INFO] File does not exist!
[SERVICE: 0x9F8,20:58:41 INFO] [1] iTunes Preference file does not exist!
[SERVICE: 0x9F8,20:58:41 INFO] [1] ===== iPod Mini =====
[SERVICE: 0x9F8,20:58:41 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x9F8,20:58:41 INFO] 20:58:41, year 2007, day of yr. 36, GMT offset -8 isDST 1
[SERVICE: 0x9F8,20:58:41 INFO] [1] progress is now 0
[SERVICE: 0x9F8,20:58:43 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x9F8,20:58:43 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x9F8,20:58:43 INFO] iTunes located at 'C:\Arquivos de programas\iTunes\iTunes.exe'
[SERVICE: 0x9A4,20:58:43 INFO] launching iTunes.
[SERVICE: 0x9C0,20:59:01 INFO] <0x4> Got Serial #
[SERVICE: 0xA18,20:59:01 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xA18,20:59:01 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xA18,20:59:01 INFO] Mounted
[SERVICE: 0xA18,20:59:01 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xA18,20:59:01 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x9C0,20:59:01 INFO] Mounted
[SERVICE: 0x9C0,20:59:01 INFO] [1] already mounted!
[SERVICE: 0x9C0,20:59:01 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x9E4,20:59:03 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x9C0,20:59:03 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x9C0,20:59:03 INFO] Mounted
[SERVICE: 0x9C0,20:59:03 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x9C0,20:59:03 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xA18,20:59:03 INFO] <0x4> COM request for device 1 drive letter - G
[SERVICE: 0x9C0,20:59:03 INFO] Mounted
[SERVICE: 0x9C0,20:59:03 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x9C0,20:59:03 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x9C0,20:59:03 INFO] File does not exist!
[SERVICE: 0x9C0,20:59:03 INFO] [1] CreateFileW error 0x3
[SERVICE: 0x9C0,20:59:03 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0x9C0,20:59:03 INFO] [1] ReadDevicePreferences() failed!
[SERVICE: 0xA04,21:03:50 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:03:50 INFO] [1] input #2 from src #0
[SERVICE: 0xA04,21:03:50 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:03:50 INFO] [1] input #3 from src #0
[SERVICE: 0x9FC,21:03:51 INFO] [1] input #2
[SERVICE: 0x9F4,21:03:51 INFO] [1] input #3
[SERVICE: 0xA04,21:03:51 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:03:51 INFO] [1] input #4 from src #0
[SERVICE: 0x9F8,21:03:51 INFO] [1] input #4
[SERVICE: 0x9FC,21:03:51 INFO] [MACHINE 1 INPUT #2] - (HDW) CheckDevNode
[SERVICE: 0xA04,21:03:51 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:03:51 INFO] [1] input #5 from src #0
[SERVICE: 0x9FC,21:03:52 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9F4,21:03:52 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
[SERVICE: 0x9F4,21:03:52 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9F8,21:03:52 INFO] [MACHINE 1 INPUT #4] - (HDW) CheckDevNode
[SERVICE: 0x9F8,21:03:52 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9F8,21:03:52 INFO] [1] input #5
[SERVICE: 0x9F8,21:03:52 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0x9F8,21:03:52 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xA04,21:04:18 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:04:18 INFO] [1] input #6 from src #0
[SERVICE: 0x9FC,21:04:18 INFO] [1] input #6
[SERVICE: 0x9FC,21:04:18 INFO] [MACHINE 1 INPUT #6] - (HDW) CheckDevNode
[SERVICE: 0x9FC,21:04:18 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xA04,21:16:24 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:16:24 INFO] [1] input #7 from src #0
[SERVICE: 0x9F4,21:16:24 INFO] [1] input #7
[SERVICE: 0x9F4,21:16:24 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0x9F4,21:16:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xA04,21:33:20 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:33:20 INFO] [1] input #8 from src #0
[SERVICE: 0x9F8,21:33:20 INFO] [1] input #8
[SERVICE: 0xA04,21:33:20 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:33:20 INFO] [1] input #9 from src #0
[SERVICE: 0x9FC,21:33:20 INFO] [1] input #9
[SERVICE: 0xA04,21:33:21 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:33:21 INFO] [1] input #10 from src #0
[SERVICE: 0x9F4,21:33:21 INFO] [1] input #10
[SERVICE: 0x9F8,21:33:21 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0x9F8,21:33:21 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x9F8,21:33:21 INFO] [1] progress is now 1
[SERVICE: 0x9FC,21:33:21 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0x9F8,21:33:21 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Unknown}
[SERVICE: 0x9F8,21:33:21 INFO] [MACHINE 1 ACTIONS] - {Unknown}
[SERVICE: 0x9FC,21:33:21 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x9F4,21:33:21 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0x9F4,21:33:21 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x9F8,21:33:21 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
[SERVICE: 0x9F8,21:33:21 INFO] [1] progress is now 0
[SERVICE: 0x9F8,21:33:21 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xA04,21:33:21 INFO] [VolumeRemoved] existing mask 0x40, arrive mask 0x40
[SERVICE: 0xA04,21:33:21 INFO] [1] value = 1
[SERVICE: 0xA04,21:33:21 INFO] [1] input #11 from src #0
[SERVICE: 0x9FC,21:33:21 INFO] [1] input #11
[SERVICE: 0xA04,21:33:21 INFO] [InterfaceRemoved]
[SERVICE: 0xA04,21:33:21 INFO] [1] value = 0
[SERVICE: 0xA04,21:33:21 INFO] removed device number 1 from m_objDeviceNumberMap
[SERVICE: 0xA04,21:33:21 INFO] [1] input #12 from src #0
[SERVICE: 0x9F4,21:33:21 INFO] [1] input #12
[SERVICE: 0xA04,21:33:21 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:33:21 INFO] [1] Progress state is 3, Waiting to disconnect = 0
[SERVICE: 0xA04,21:33:21 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
[SERVICE: 0xA04,21:33:21 INFO] removed device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" from m_vctDeviceInterfaces
[SERVICE: 0xA04,21:33:21 INFO] [1] input #13 from src #0
[SERVICE: 0x9F8,21:33:21 INFO] [1] input #13
[SERVICE: 0xA04,21:33:21 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:33:21 INFO] [1] input #14 from src #0
[SERVICE: 0x9FC,21:33:21 INFO] [MACHINE 1 INPUT #11] - (HDW) Volume Unmount
[SERVICE: 0x9FC,21:33:21 INFO] [1] progress is now 3
[SERVICE: 0x9FC,21:33:21 INFO] [1] Setting progress to 3
[SERVICE: 0x9FC,21:33:21 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x9F4,21:33:21 INFO] [MACHINE 1 INPUT #12] - (HDW) Interface Removal
[SERVICE: 0x9F4,21:33:21 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x9F4,21:33:21 INFO] [1] input #14
[SERVICE: 0x9F8,21:33:21 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0x9F8,21:33:22 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x9F4,21:33:22 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
[SERVICE: 0x9F4,21:33:22 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xA04,21:36:21 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:36:21 INFO] [1] input #15 from src #0
[SERVICE: 0x9FC,21:36:21 INFO] [1] input #15
[SERVICE: 0x9FC,21:36:21 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
[SERVICE: 0x9FC,21:36:21 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xA04,21:48:20 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:48:20 INFO] [1] input #16 from src #0
[SERVICE: 0x9F8,21:48:20 INFO] [1] input #16
[SERVICE: 0x9F8,21:48:20 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
[SERVICE: 0x9F8,21:48:20 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xA04,21:48:20 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:48:20 INFO] [1] input #17 from src #0
[SERVICE: 0x9F4,21:48:20 INFO] [1] input #17
[SERVICE: 0xA04,21:48:20 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:48:20 INFO] [1] input #18 from src #0
[SERVICE: 0x9FC,21:48:20 INFO] [1] input #18
[SERVICE: 0x9F4,21:48:21 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
[SERVICE: 0x9F4,21:48:21 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9FC,21:48:21 INFO] [MACHINE 1 INPUT #18] - (HDW) CheckDevNode
[SERVICE: 0x9FC,21:48:21 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xA04,21:48:31 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xA04,21:48:31 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xA04,21:48:31 INFO] [1] set waiting to mount = 1
[SERVICE: 0xA04,21:48:31 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
[SERVICE: 0xA04,21:48:31 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xA04,21:48:31 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xA04,21:48:31 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xA04,21:48:31 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xA04,21:48:31 INFO] [1] input #19 from src #0
[SERVICE: 0x9F8,21:48:31 INFO] [1] input #19
[SERVICE: 0xA04,21:48:31 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:48:31 INFO] [1] input #20 from src #0
[SERVICE: 0x9F4,21:48:31 INFO] [1] input #20
[SERVICE: 0xA04,21:48:31 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:48:31 INFO] [1] input #21 from src #0
[SERVICE: 0x9FC,21:48:31 INFO] [1] input #21
[SERVICE: 0x9F8,21:48:31 INFO] [MACHINE 1 INPUT #19] - (HDW) Interface Arrival
[SERVICE: 0x9F8,21:48:31 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0x9F8,21:48:31 INFO] [1] progress is now 2
[SERVICE: 0x9F8,21:48:31 INFO] [1] progress is now 2
[SERVICE: 0x9F8,21:48:31 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x9F8,21:48:31 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x9F8,21:48:31 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x9F8,21:48:31 INFO] VendorId: Apple
[SERVICE: 0x9F8,21:48:31 INFO] ProductId: iPod
[SERVICE: 0x9F8,21:48:31 INFO] revision: 1.62
[SERVICE: 0xA04,21:48:31 INFO] [VolumeArrive] mask = 0x40
[SERVICE: 0xA04,21:48:31 INFO] looking up device # for \\.\G:
[SERVICE: 0xA04,21:48:31 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xA04,21:48:31 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xA04,21:48:31 INFO] [1] set waiting to mount = 0
[SERVICE: 0xA04,21:48:31 INFO] [1] input #22 from src #0
[SERVICE: 0x9F8,21:48:31 INFO] vendor bytes:
[SERVICE: 0x9F8,21:48:31 INFO] 02 01 00 00 00 00 00 00 00 07 00 02 92 00 00 00 00 00 00 00
[SERVICE: 0xA04,21:48:31 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:48:31 INFO] [1] input #23 from src #0
[SERVICE: 0xA04,21:48:31 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:48:31 INFO] [1] input #24 from src #0
[SERVICE: 0xA04,21:48:31 INFO] [DevNodesChanged]
[SERVICE: 0xA04,21:48:31 INFO] [1] input #25 from src #0
[SERVICE: 0x9F8,21:48:31 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x9F8,21:48:31 INFO] [1] Power State: Powered
[SERVICE: 0x9F8,21:48:31 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x9F8,21:48:31 ERROR] Did not find first letter of stage
[SERVICE: 0x9F8,21:48:31 INFO] [1] serial number 000A27001438703A
[SERVICE: 0x9F8,21:48:31 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x9F4,21:48:31 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
[SERVICE: 0x9F4,21:48:31 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9FC,21:48:31 INFO] [MACHINE 1 INPUT #21] - (HDW) CheckDevNode
[SERVICE: 0x9FC,21:48:31 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9FC,21:48:31 INFO] [1] input #22
[SERVICE: 0x9F8,21:48:31 INFO] [1] input #23
[SERVICE: 0x9F4,21:48:31 INFO] [1] input #24
[SERVICE: 0x9FC,21:48:31 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
[SERVICE: 0x9FC,21:48:31 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x9FC,21:48:31 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9FC,21:48:31 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x9FC,21:48:31 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x9FC,21:48:31 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x9FC,21:48:31 ERROR] Did not find first letter of stage
[SERVICE: 0x9FC,21:48:32 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x9FC,21:48:32 INFO] File does not exist!
[SERVICE: 0x9FC,21:48:32 INFO] [1] iTunes Preference file does not exist!
[SERVICE: 0x9FC,21:48:32 INFO] [1] ===== iPod Mini =====
[SERVICE: 0x9FC,21:48:32 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x9FC,21:48:32 INFO] 21:48:32, year 2007, day of yr. 36, GMT offset -8 isDST 1
[SERVICE: 0x9FC,21:48:32 INFO] [1] progress is now 0
[SERVICE: 0x9FC,21:48:34 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x9FC,21:48:34 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x9FC,21:48:34 INFO] iTunes located at 'C:\Arquivos de programas\iTunes\iTunes.exe'
[SERVICE: 0x9F8,21:48:34 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
[SERVICE: 0x9F8,21:48:34 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9F4,21:48:34 INFO] [MACHINE 1 INPUT #24] - (HDW) CheckDevNode
[SERVICE: 0x9F4,21:48:34 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9F4,21:48:34 INFO] [1] input #25
[SERVICE: 0x9A4,21:48:34 INFO] launching iTunes.
[SERVICE: 0x9F4,21:48:34 INFO] [MACHINE 1 INPUT #25] - (HDW) CheckDevNode
[SERVICE: 0x9F4,21:48:34 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x900,21:48:49 INFO] <0x4> Got Serial #
[SERVICE: 0xAD8,21:48:49 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x480,21:48:49 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x480,21:48:49 INFO] Mounted
[SERVICE: 0x480,21:48:49 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x480,21:48:49 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x900,21:48:49 INFO] Mounted
[SERVICE: 0x900,21:48:49 INFO] [1] already mounted!
[SERVICE: 0x900,21:48:49 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x480,21:48:51 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xAD8,21:48:51 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xAD8,21:48:51 INFO] Mounted
[SERVICE: 0xAD8,21:48:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xAD8,21:48:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x900,21:48:51 INFO] <0x4> COM request for device 1 drive letter - G
[SERVICE: 0xAD8,21:48:51 INFO] Mounted
[SERVICE: 0xAD8,21:48:51 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xAD8,21:48:51 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xAD8,21:48:51 INFO] File does not exist!
[SERVICE: 0xAD8,21:48:51 INFO] [1] CreateFileW error 0x3
[SERVICE: 0xAD8,21:48:51 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0xAD8,21:48:51 INFO] [1] ReadDevicePreferences() failed!
[SERVICE: 0xA04,22:16:10 INFO] [DevNodesChanged]
[SERVICE: 0xA04,22:16:10 INFO] [1] input #26 from src #0
[SERVICE: 0x9FC,22:16:10 INFO] [1] input #26
[SERVICE: 0x9FC,22:16:10 INFO] [MACHINE 1 INPUT #26] - (HDW) CheckDevNode
[SERVICE: 0x9FC,22:16:10 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xA04,23:05:50 INFO] [DevNodesChanged]
[SERVICE: 0xA04,23:05:50 INFO] [1] input #27 from src #0
[SERVICE: 0x9F8,23:05:50 INFO] [1] input #27
[SERVICE: 0xA04,23:05:50 INFO] [DevNodesChanged]
[SERVICE: 0xA04,23:05:50 INFO] [1] input #28 from src #0
[SERVICE: 0x9F4,23:05:50 INFO] [1] input #28
[SERVICE: 0x9F8,23:05:50 INFO] [MACHINE 1 INPUT #27] - (HDW) CheckDevNode
[SERVICE: 0x9F8,23:05:50 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x9F4,23:05:50 INFO] [MACHINE 1 INPUT #28] - (HDW) CheckDevNode
[SERVICE: 0x9F4,23:05:50 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001438703a&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD58,23:16:32 INFO] <0x4> Got Serial #
[SERVICE: 0xD58,23:16:32 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xBE0,23:16:32 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xBE0,23:16:32 INFO] Mounted
[SERVICE: 0xBE0,23:16:32 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xBE0,23:16:32 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xD58,23:16:32 INFO] Mounted
[SERVICE: 0xD58,23:16:32 INFO] [1] already mounted!
[SERVICE: 0xD58,23:16:32 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xBE0,23:16:34 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xD58,23:16:34 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD58,23:16:34 INFO] Mounted
[SERVICE: 0xD58,23:16:34 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD58,23:16:34 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x908,23:16:34 INFO] <0x4> COM request for device 1 drive letter - G
[SERVICE: 0x908,23:16:35 INFO] Mounted
[SERVICE: 0x908,23:16:35 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x908,23:16:35 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x908,23:16:35 INFO] File does not exist!
[SERVICE: 0x908,23:16:35 INFO] [1] CreateFileW error 0x3
[SERVICE: 0x908,23:16:35 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0x908,23:16:35 INFO] [1] ReadDevicePreferences() failed!
[SERVICE: 0xD58,23:16:45 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD58,23:16:45 INFO] Mounted
[SERVICE: 0xD58,23:16:45 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD58,23:16:45 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xBE0,23:16:45 INFO] Mounted
[SERVICE: 0xBE0,23:16:45 INFO] [1] already mounted!
[SERVICE: 0xBE0,23:16:45 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x908,23:16:45 INFO] Mounted
[SERVICE: 0x908,23:16:45 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x908,23:16:45 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x908,23:16:45 INFO] File does not exist!
[SERVICE: 0x908,23:16:45 INFO] [1] CreateFileW error 0x3
[SERVICE: 0x908,23:16:45 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0x908,23:16:45 INFO] [1] ReadDevicePreferences() failed!
[SERVICE: 0xD58,23:16:45 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD58,23:16:45 INFO] Mounted
[SERVICE: 0xD58,23:16:45 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD58,23:16:45 INFO] Device 1 not in intermediate state. It appears to be truly mounted.

I formated my iPod using windows

How to restore when during update, got 'connect to itunes" icon, no option to restore?

I was doing the latest update, but something went wrong and I got an update failed message. iPod touch had "connect to itunes" icon. iTunes did have a restore button, but only for an instant, and it went away (stupid robo-call rang, and I may have jumped). Now iTunes won't give me a restore option, and sync option in File/devices is grayed out.
Itunes also doesn't recognize the iPod when I plug it in, although the computer knows it's there. (Makes a sound when I connect it.)
I have rebooted computer, checked iTunes is latest version.
Tried the solution of holding down power and home buttons. The apple icon came up, but then it went immediately to the "connect to itunes" message.
I haven't tried the solutions that require you download a jailbreak program. Hope that isn't necessary.
Looked all over the internet, and haven't found a situation described where iTunes took away the restore option. Can someone help me?

- Try another cable
- Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
- If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer
For how to restore:
iTunes: Restoring iOS software

Which Power Adaptor

Hi guys,
I have an iBook G4 (late 2004) and stupidly left the power adaptor in a hotel last weekend. I am looking to get a replacement, but having trouble figuring out which to get - the 45w or 65w adaptor. The tech page below seems to suggest the 45w version, but all the resellers on eBay selling the 45w adaptor don't list the "late 2004" model as a compatible one. Anyone who could give me a helping hand would be much appreciated. I am from the UK, and bought my laptop from the UK online store (if this makes any difference).
Many thanks,
Tony
P.S. My iBook battery is getting very long in the tooth and I've been looking at the high-capacity Newertech NuPower batteries. Anyone have any experience with these?

Welcome to Apple Discussions!
If you haven't already, by all means call the hotel and see if they still have yours and will send it to you--it's worth a try.
The US Apple Store lists the 65W as a replacement. You could call your Apple Store and ask--they can confirm whether the 65W is OK for your particular iBook. Or you could spot search the on line store. But from what I remember reading on this forum, the 65W will be fine. But it's always safest to check directly with Apple. And considering how easily damaged the power adaptors are, it might be worth considering a new one.
As for the battery--no idea. I never had to buy a battery.
Good luck!

Fake Apple USB power adaptor advertised as real on amazon?

http://www.amazon.com/Apple-Power-Adapter-iPod-iPhone/dp/B001GQ3DP6/ref=dpob_titlece
Ummm... how can apple(or is amazon to blame?) allow this?? i mean i wouldn't mind if they said usb power adaptor for ipod. Just don't falsely advertise as the real one made by apple.
What do you think? and to whom do I complain :P?

Sounds to me like they are selling adapters they are getting from 3rd party sources (or used) hence the fluctuating prices. Overall reviews are above average and the seller is highly rated. If you have an issue with them you need to take it up with Amazon but there is nothing there Apple would be concerned with.

Have a C310a that will not start. Have +32VDC from Ac power adaptor, using on a Mac.

Have a PhotoSmart Premium e-All-in-One PrinterC310a, it will not turn on. We have been using it on an iMac and a MacBook, both OS X 10.6.7. Have been thru the HP resetting of the power adaptor etc, so I checked at the printer plug and had +32VDC, which is the correct input voltage. The printer still will not start, what am I missing?

zzzzip wrote:
Have a PhotoSmart Premium e-All-in-One PrinterC310a, it will not turn on. We have been using it on an iMac and a MacBook, both OS X 10.6.7. Have been thru the HP resetting of the power adaptor etc, so I checked at the printer plug and had +32VDC, which is the correct input voltage. The printer still will not start, what am I missing?
Hey zzzzip! I know its a basic question, but have you tried using a different outlet that you know works? Here is the document on troubleshooting power issues:
The HP Product Won't Turn On or Respond
If you have gone through all theses steps I would contact telephone support.
Regards,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HT1766 after installing ios7, my phone now is always in headphone mode, how to restore back to ringer mode

after installing ios7, my phone now is always in headphone mode, how to restore back to ringer mode

I did a search on "recovery mode loop"..you might take a look at the following threads to get some ideas...some mention is made of "USB conflicts"..not sure how valid that is.....they also mention doing a hard power down of the device...sounds like if you absolutely can't get it out of recovery mode, a trip to the Genius bar will be necessary...
https://discussions.apple.com/message/15357775#15357775
https://discussions.apple.com/message/16248523#16248523

What does Apple mean by "For best battery performance, leave your device connected to a power source until the restore is complete."

I just recently returned an IPad air and exchanged it for another. I first set up this new one as a new IPad but then deleted all content and settings right away (since I wasn't getting the progress I had made in apps and games) in order to restore it from my previous IPad Air. I then checked after on how to backup via icloud and saw this line under the subtitle of how to restore from a backup, "For best battery performance, leave your device connected to a power source until the restore is complete." What does Apple mean by "for best battery performance"? Im just a bit worried of issues.
p.s. And yes I did have it connected to the power. And the ios is the default ios for new IPad Airs.

Welcome to the Apple Community.
It only means you should restore whilst it is connected to a power supply, so that your battery doesn't go flat during the process.

No Power Adaptor--How to Restore

Similar Messages

Maybe you are looking for