No power after changing a cracked screen

I just replaced a cracked screen on my toshiba satellite laptop and after I put the battery back in a nd turned it on it started for a few seconds and then shut off and now nothing happens when I try to turn it on. Any ideas on what has possibly happened?

Open it back up and check all of your connections, then try powering it up again after it is reassembled. Make sure the battery and power cord are disconnected while you work on it.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

Similar Messages

Flickering Screen After Changing A Cracked Screen

Hello,
I cracked my screen and ordered a replacement screen from Amazon. I followed the replacement instructions, but my new screen works fine initially. Once the backlight dims due to inacticity, it flickers incessantly after I up-swipe to re-light the screen. A reset fixes it back to the point of working before the screen dims again. Also, I'm running the latest OS 10.3.1.1767. Any help is greatly appreciated.

If the phone was okay before you changed the screen, I'd suspec the new screen to be the fault, or another circuit board was damaged from whatever caused the screen to break. I have seen more than one fault with a dropped phone.
Jerry G.

Portal Run time error after changing the logon screen

Hi all,
I am running an EP7 SP08 and I try to change the logon screen as described on:
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
I copied the 'com.sap.portal.runtime.logon.par.bak' file, renamed it to 'my.new.logon.par'. after that I extracted the file with winzip. I opened the directory 'PORTAL-INF\lib\' and there I extracted the file 'umelogonbase.jar' with winrar. I opened the file 'logonLabels_en.properties' and changed the entry 'xtit_WELCOME=Welcome' to 'xtit_WELCOME=blablabla'.
I repacked the umelogonbase.jar with winrar again and after that I repacked the 'my.new.logon.par' with winzip again.
Then I placed the par file back at '<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd' and changed the authscheme.xml with the new par file and changed the 'login.authschemes.definition.file' all described on the help.sap.com url mentioned above.
However, when I restart the portal and open the logon screen I see the error message:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
See the details for the exception ID in the log file
The default trace shows the following message:
An error occured during authscheme computation.
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : my.new.logon.certlogon
Is there anyone who knows what goes wrong? The description on help.sap.com is very straightforward but still it doesn't work for me...
Any help would be appreciated.
Kind Regards,
Nico van der Linden...

Hi,
Check if you did the following steps pertaining to the authschemes.xml file:
--> Download the authschemes.xml to local drive. Rename the file to,say, authschemes_new.xml
--> In authschemes_new.xml, did you change <b>all</b> entries of com.sap.portal.runtime.logon with the name of modified logon par file?
-->Upload the authschemes_new.xml file using configtool; and, change the property login.authschemes.definition.file to authschemes_new.xml in configtool.
-->Finally,restart your portal. Hope it helps.
Regards,
M.Subathra

My ipod 4 will not turn on after i changed my cracked screen what,do i do to fix it

I cracked my ipod 4 gen and I replaced the screen myself I followed the instructions right that people gave me and now my ipod won't turn on I charged it and still it won't work what can I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem. Take it apart and verify that you reassembled it correctly. Next take it to someone with more experience.

My t61 - no power after changing the power jack

Hello guys,
So the long story short , the power jack on my t61 wasn't working.I bought the new one , changed it today , I am pluging it -no power at all.I dont think its the charger as up until the end it was working , its here to say i havent started the laptop for about 3 months .It was a pain to start it before , i had to twist the power jack in every possible was just to make it power on.So my concern right now is whether the motherboard is dead or not.
Please anything you have like a clue will be more that appritiated!
Solved!
Go to Solution.

There isn't much required to get the power light to come on. It is possible you shorted something out. IT is possible something isn't plugged in all the way. Even if the CPU isn't in or the memory isn't seated, you would get the power light. Is it possible that all the twisting before broke the wire between the ac adapter and the machine? Can you get another power supply to try?

3D Doesn't work after changing the LCD Screen

Hi, I had a problem with my Toshiba Qosmio F755-3D350 the LCD screen broke and I have to replace it with a new screen.
The new screen is the same model : B156HB01 V.0 from Au electronics, that the original screen on my laptop had.
everything works fine the resolution, the camera but when it comes the 3D it doesnt work the Leds on the web camera doesn't turn on and activate the wiggle stereoscopy.
How can i activate again the 3D or Where is the problem?
Thanks.

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

How can i change the cracked screen of iphone6 in a country which has no apple store?

Just one time fallen... Totally craked, but the touch function is still available.
I bought this IPHONE6 from online store of the apple official website, and this country Im living in which has no real APPLE store, so where should I go to replace the broke screen.
By the way, I'm in UAE.
Thank you if anyone can help me~

Lotam wrote:
Thank you !
I've contacted the apple service provider by the site you gave me in your reply.
But now the problem is that they don't offer any repair services for the screen cracked iphone6, they just provide the service of replace a new device with extra 1300+ AED I need to pay because I don't have the APPLECARE SERVICE.
I thought the price is not very reasonable in consideration of I just payed 2599 AED to buy it.
Is there any way to buy the APPLECARE SERVICE right now?
You're being offered a replacement device for half the price of the original, even though it was totally your fault, and no one else's, that it got damaged... and you think this is unfair?
Most companies don't even offer that. If you have a non-functioning device that isn't covered under some form of warranty or protection plan, you normal buy a mother device, at full price.
You're getting a 50% discount. What, exactly, is unreasonable about this?

I changed the cracked screen on my 3gs, and screen works but it will not boot up and go past the Apple screen.

I tried recovery at least three times, and it says that it can not complete the activation at this time. I did take my Sim card out and try as well, because I had to use it in my old phone. I reopened the phone and double checked that everything was plugged back in from the screen change. What went wrong??? I restored it before and everything worked fine. It's not hacked or jailbroke, so I don't know what's going on???? Please help!

Yes, i did. I bought a screen repair kit and it was very simple to change. it works, but its stuck in recovery mode...

Ipod Touch 4 Gen no Power after screen replacement

Alright, after changing the broken screen on my ipod touch 4 gen, i can't power on the device. This is not the first time i change
screen's on ipod's before. The power ribbon cable is ok and nothing has been damage internaly. The screen does work because
when i plug my ipod into the wall or computer, i get the charging battery screen. But even after leaving it 20 min on charge, ipod
still doesn't power on. Seems like the battery is not keeping it's charge anymore. But how would that even be possible after
changing a screen ? .... I also tried a hard reset when plugued in to my computer, iTunes detects the ipod in recovery mode, but the recovery
mode times out and gives out an arror, doesn't want to complete.
I really don't know what to try anymore, Even tried the old screen back and same problem. Do i need to repalce the battery ? ...
Please help

Could be the battery or maybe another problem I have no specific suggestions.

U150 keyboard malfunction after changing screen, = repeating, few numbers not working

Hi!
I changed my cracked U150 screen on my own (warranty is passed). I thought it worked fine on test boot before attaching the bezel. I aborted the test boot (as the instruction video said to do), and put on the bezel with some difficulty (it's a tight fit on the bottom of the screen around the hinges).
The next boot up failed, which I've never seen before. Got a bit worried, as it wanted me to try recovering to a set point (several weeks prior). Opted to just turn off and back on, and it seemed to work...EXCEPT now a few keys on the keyboard malfunction. Esc, `, 5, 6, 0, ) and Delete all type their character and then immediately type an = which repeats. The actual = button does nothing: types nothing. In caps, the keys do the same thing, but of course type a + which repeats. F5 also does it, and I'm not sure about other F keys because I don't want to do some function that will shut down my typing right now!
U15============ 0========= )+=========== When I press any other key, the repeating equals stops, of course...
When I boot up, the computer beeps repeatedly as if a key is repeating in error, so something in startup must use one of those keys and causes the same issue: since I don't actually press any key on bootup, does that indicate it's more of a software problem than a hardware problem?
I've taken off the screen bezel again (a real pain and not a good repeated activity because I typically break one tiny plastic clip each time no matter how careful I am) and no change. I see no keyboard cable anywhere near the screen or cover or hinges-just WLAN cables and the camera. I did not spill anything on the keyboard and it worked totally fine until I replaced the screen. Online info about Lenovo S or Y series seems to show the keyboard cable down low, so again, not near the screen. The screen website (laptopscreen.com) folks had nothing to say that helped. My search online shows nobody with a similar experience.
There is no Lenovo keyboard driver on the Lenovo site, so I don't see that uninstalling and reinstalling the driver would make a difference: besides, how do I reinstall a keyboard driver if I can't use the keyboard once I've uninstalled it? Is the mousepad enough to reinstall?
So, I would be ever ever so grateful for any help/ideas. What's my next step: taking out the keyboard to see if the cable loosened, even though I went nowhere near the cable??
Thanks!!

So it's been a while, but these things can drag out in life...now my brain is starting to adapt to the change, and that's annoying, so I'm back at trying to fix this.
I tried safe mode, and the problem persists. I tried returning all my startup options to default, and it persists. I previously had returned to a Restore Point before the problem, and that didn't fix it.
Today I was going to look at the keyboard cable, but getting the top off is proving to be difficult and since I can use the machine as is, even if annoying, I don't want to go there yet. Besides, there is no reason for this to be a hardware issue:
I aborted a bootup by pressing and holding the power button.
Next bootup failed, and the machine asked me to restore to a previous Restore Point.
I turned off the machine again instead of restoring, and ever since then I've had the keyboard problem.
I tried uninstalling the keyboard and restarting computer so the driver reinstalls, and that didn't fix it.
I plugged in an external keyboard and that worked fine.
I am now wondering about using Linux to get at the problem.
Any ideas? I totally appreciate how active you are on this forum, and all the folks you've given advice to. You are making computers work for people: thanks!!
Tamarinda

HT4972 I Replaced my cracked screen and function key but my phone wont power on?

I replaced the cracked screen on my phone. When I finished the function key wasnt working so I replaced that now my phone wont turn on! any one have any advice on what to do?

Radio Shack replacement of smart phone screens was part of a TV news article on how much original vendors charged to replace the phones vs amount Radio Shack charged to replace the screen - I think it was about $100 to have it done.
Just like replacing a watch battery - its all about having the proper tools to do it.
I did use Internet instructions on how to change the battery in a game boy game - without the proper tool (a soldering gun and some solder) it took a few tries to get the connections and battery taped into place and get the game taped shut - before the game would power up and save.

Xf86-video-ati: system freezes after changing power profile to low?

I am running multihead with awesome-wm and the latest xf86-video-ati drivers (not from testing). when i change the power method to profile and change the power profile to low, the screen flashes, my temps start to go down and everything seems normal. a few minutes later the system hard freezes, can't ctrl-alt-del, power button doesn't work on a single press (have to press and hold). i don't have this problem when running dynpm but because i am running dual screens, the temps don't drop at all and hover around 66 degrees.
card is a radeon 6950.
this is a fresh install of arch, had arch installed on the same system about a year ago and didn't have this problem at all.

If I remember correctly this is known to be possible to happen (is that real english? ). In this case, just don't put it to "low", since it's quite experimental.

My iphone has a cracked screen but the problem is with the entry of aurriculares that move to the music I want to know if I would change?

my iphone has a cracked screen but the problem is with the entry of aurriculares that move to the music I want to know if I would change?

Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

Settings screen unavailable after changing home screen

I've just tried to change my home screen using the settings menu and one of the preloaded images. It didn't change the home screen, and now when i go back to the settings screen all I can see is that image. It won't respond to the select or cancel buttons. Everything else is working fine, but I'm panicking without access to settings. Help!

Try closing the Settings app completely and see if it then works when you re-open it : from the home screen (i.e. not with Settings 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Settings app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Xperiahow long does it take to change crack screen on xperia z1

tomorrow its been a month since i've send my xperia Z1 to service center, origanally i broke my screen and send it for a change but untill today the best ansewer the gave me "still in repair status" seriously guys u tell me does it takes a month just for cracked screen?. Also more mejor issue between me and sony malaysia customer service.
here's my case reference number for further infomation and update
1-1315996920

Hi fauzioslaini,
At your convenience, please reach out to our colleagues at Sony Mobile for further assistance with your question. You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/ Thanks!

No power after changing a cracked screen

Similar Messages

Maybe you are looking for