No power manager in Windows 8 - this forever?

Since the power manager app doesn't seem to work on Windows 8, how do you check the battery charge cycles? Also, is it gone forever or is Lenovo working on fixing the compatibility?
I have an X230. 

See http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Windows-8-Power-Management-Software/m-p/983... for Windows 7 workarounds.
I haven't seen Lenovo confirm there will be a Windows 8 version.

Similar Messages

  • Battery gauge error running Power Manager for Windows XP version 5.20

    Last week on my R61 (8932-CTO),  Update Retriever and System Update requested that I download and install ThinkPad Power Manager for Windows XP version 5.20. After rebooting, I immediately received an error box with the following message: 
    An exception occurred while trying to run"C:\Progra~1\ThinkPad\UTILIT~1\PWRMGRTR.DLL,PwrMgrBkGndMonitor"
    As a result of this error, the battery gauge no longer displays correctly. The space where it used to be is blank, but clicking the empty space still gives you the option of starting Power Manager.
    What is puzzling about this is that version 5.20 is not available in either in the Driver Matrix, nor on the Downloads and Drivers web page. The version of the software that is presented there is version 5.13.
    The driver for ThinkPad Power Manager for Windows XP - version 5.20 can be downloaded from:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghu704ww.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghu704ww.txt
    Another interesting point, is that this version of the driver has, as yet, not been presented to me on my R500 (2714CTO), although both machine types are listed as supported models.
    Why are Update Retriever and System Update downloading software that apparently has not been officially released yet?  Why is this only happening on my R61 and not on my R500?
    And last of all, why has his software been released when it seems to have an obvious problem? 
    Any explanations would be appreciated.
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

    I just wanted to confirm that the last working version for Windows XP is version 5.05 revision 04.
    It can be downloaded from Lenovo:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g6u702ww.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g6u702ww.txt
    Cheers!

  • Power Manager for Windows Vista - ThinkPad

     The link show the update is for a T61p, running Vist, 
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
    But once the download is done, the system refuses to install the  v2.50 - why is that ?
    The pc is aT61p, vista Ult., with PMgt 2.3.

    Hi Ran,
    Thanks!
    I haven't tried it yet.
    In the meantime i did more testing and found out that even with only Power Manager version 2.41a installed the latest Intel Pro wireless driver also supported by lenovo is not stabel and FN-F5 or windows network connection also fails to switch the radio back on after a reboot when the radio has been turned off first ;-(
    Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283
    over and over I decide to revert back to the old Intel wireless driver listed on this page.
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67256
    Reinstalled ThinkVantage Access Connections for Window Vista version 5.12
    I tested it again........ IT WORKS!!!
    Please try this combination:
    BIOS Version: 1.15
    Bluetooth with Enhanced Data Rate Software II for Windows Vista Version: 6.2.0.5000
    ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62
    ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE Version: 1.52
    ThinkVantage Productivity Center Pack Version: 3.02
    Power Manager for Windows Vista Version: 2.41a
    ThinkVantage Access Connections for Windows Vista Version 5.12 !!
    Intel Wireless LAN (11abgn, abg, bg) for Windows Vista 11.05.0 API
    Regards,
    Ritchy
    Message Edited by Ritchy on 01-14-2009 11:56 PM

  • Power Manager for Windows 8.1

    Where is Power Manager for Windows 8.1?  (For ThinkPad Edge series laptops)
    There is a "Lenovo Power Management Driver", but no application/software to go along with it.
    Does anyone know?

    Good day and welcome to the community.
    Please see: http://forums.lenovo.com/t5/Windows-8-and-8-1/ThinkPad-software-for-Windows-8/td-p/899865
    There is no official support for ThinkVantage Power Manager beyond Windows 7.
    There are reports that some have installed it, but there are warnings that it may(?) clash with Windows 8/8.1 native power management functions and potentially cause system instability.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Problem mit ThinkPad Power Manager Desktop Windows 8.1 Thinkpad W530

    Hallo Zusammen
    Ich habe auf meinem W530 Windows 8.1 installiert.
    Ich habe von der Lenovo Website folgendes Tool heruntergeladen und installiert "ThinkPad Power Manager Desktop Windows 8.1". Das hat alles soweit geklappt.
    Nun wollte ich die Einstellungen ändern, es zeigt mir aber nur den Netztbetrieb an ich kann keine Einstellungen ändern für dne Akkubetrieb (Siehe Bild)
    Hat jemand eine Ahnung wie ich die Einstellungen für den Akkubetrieb ändern kann.
    Ich bin fast am verzweifeln, denn der Energie-Manager von Windows ist absoluter schrott, der Akku ist ständig leer.
    Besten Dank
    Chrigge
    Gelöst!
    Gehe zu Lösung.

    Dank für deine Antwort.
    IntecBerlin schrieb:
    Klick mal oben auf Wechseln zu Allgemein da hast du glaub ich eine bessere Ansicht und ganz regeln "Hohe Leistung" oder "Lange Akkulebensdauer. etc..
    Ich habe es ausprobiert, aber es ändert sich garnichts an den Einstellungen, weder wird die Bildschirmhelligkeit verringert noch hält der Akku wirklich länger.
    Ich habe das Gefühl, dass die Windows einstellungen den Powermanager von Lenovo übersteuern.
    IntecBerlin schrieb:
    Ansonsten wenn du denn Akku länger halten willst unten auf Maximale Energiesparung klicken.
    Dieses Vorgehen ist für mich nicht so praktikabel, denn ich möchte die Einstellungen lieber einzeln vornehmen, um die Akkulebensdauer und Performance an meine Bedürfnisse anzupassen.
    Gruss
    Chrigge

  • Lenovo Power Manager in Windows 8

    Hi guys,
    Since Lenovo Power Manager is not available for Windows 8 (no matter my laptop is specified to be FOR Windows 8... grrrrr...) I've been playing around because I needed not the infamous power gauge taking space in my taskbar, but some advanced settings.
    Well, I found a couple of things:
    Power Manager (g6u432ww.exe) can be installed in Windows 8 and can be used. Even the power gauge.
    To install it, you have to run the setup in Windows 7 compatibility mode.
    It doesn't work very well: sometimes it crashes or the UI won't open (at doesn't open anymore, no matter what you do). But it does run the first time (use it before restarting) and you can change battery settings and some other stuff anyway.
    Do create a Restore Point before, because is not created automatically and because you won't be able to uninstall it later, since the setup expects Windows 7.
    If you install Lenovo Settings Dependency Package (gfsd02ww.exe) after that, Power Manager gets upgraded from version 6.36 to 7.11. But still crashes.
    Settings regarding battery charging are kept, no matter you restore Windows using system restore. So you can create a Restore Point, install Power Manager, change battery settings, and then restore Windows.
    Is not a solution (I'm still expecting for Lenovo to fix this support for Windows 8). But at least I was able to stop the battery from charging all the time.
    This has been tested on a ThinkPad Edge S430.
    One important question left is:
    Why Lenovo Power Manager 7.11 can't be downloaded and installed normally? I couldn't care less for the Metro Store Apps and bulky gadgets. But I want to be able to change some settings.
    Cheers.
    If I helped you, please give me some kudos! ^^

    There's a stickied thread at the top of this board which explains / discusses ThinkPad software for Windows 8, hopefully the information you are looking for is there.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Can't uninstall Lenovo Power Manager in Windows 8 - upgraded from Windows 7

    Hi all, I recently purchased a Lenovo X230. It was preloaded with Windows 7 Home Premium. I upgraded this system to Windows 8 Pro without any problems.
    I noticed that Windows 8 Pro has some issues with the Lenovo Power Manager, which after perusing this forum seems to be pretty incompatible with Windows 8. I am trying to uninstall the Power Manager in the Control Panel, but I can't find the application to install. I only see an option to uninstall the Lenovo Power Management Driver. Does anyone know how I can uninstall the entire Lenovo Power Manager from my system?

    Backstory: I installed the Power Manager on a clean installation of Windows 8 by setting it to Windows 7 Compatibility Mode.  It seemed to be working swimmingly, until the next day when I tried to use it and discovered that it would always crash on start-up.  Unfortunate.  I naively attempted to correct this problem by uninstalling and reinstalling the application.  Strangely, I was able to successfully uninstall the program using the Add/Remove Programs Control Panel and then reinstall the program.  But, despite the reinstallation the problem persisted and I tried to uninstall the program again.  It would not uninstall, claiming the installer wasn't compatible with my system.
    Fix: Run "C:\Program Files (x86)\InstallShield Installation Information\{DAC01CEE-5BAE-42D5-81FC-B687E84E8405}\Setup.exe" -l0x9 -AddRemove from an administrative command prompt.  This should completely remove Power Manager and it's entry in the Add/Remove Programs console.  The GUID may be different if you were not using the most recent version of Power Manager, I installed 6.36.  The additional power plans that it originally installed are still in the Windows Power control panel.
    I am still wrestling with the Power Manager to get it working somewhat reliably on Windows 8.  I am very disappointed that this level of effort is required on a new system that is Windows 8 compliant.

  • Power Manager for Windows Vista - MIGR 67216 - Power Manager Utility for Vista

    I have been trying to install the Power Manager Utility for Windows Vista (MIGR 67216) hoping that this will solve my Power Manager error.  The Power Manager shuts down automatically whenever I start the computer or try to access the Power Manager.  Dow anyone have a solution?

     I have had the same issue, this is the work around that cleared it on the t61p
    a) downloaded TVT SU 3.14 exe package from Lenovo web site
     - http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel​...
     - the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-72758
    b) un installed  power management
    c) un installed TVT SU and cleared directory under  http://forums.lenovo.com/lnv/board/message?message​.uid=135306
    d) installed the TVT SU package
    e) launched the TVT SU and it downloaded TVT PM and other stuff

  • Power Manager for Windows 8

    Hey,
    Any news on release date for the power mangager for windows 8? I hate charghing my battery to 100% i'm trying to extend my battery life but it's impossible without the power manager ! 
    W520 427637u
    Solved!
    Go to Solution.

    Good day...
    You may wish to read thru the fairly lengthy thread here:
    http://forums.lenovo.com/t5/Windows-8/ThinkPad-software-for-Windows-8/td-p/899865
    For information on Power Manager and other ThankVantage tools under Windows 8.
    Hope this helps to clarify.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Edge E540: Power Manager for Windows 8.1?

    The Thinkpad Edge E540 currently comes with Windows 7 preinstalled, Windows 8 added as recovery disk. It is also suffering from an issue, where the fan will spin unnecessarily fast until going to standby and waking up again.
    As a solution it was suggested to use the Power Manager utility [1]. However, the download page [2] lists the Power Manager only for Windows 7 (and indeed it won't install on Windows 8.1). 
    Does this mean that the Power Manager is not available for Windows 8? If  it isn't, will it be?  
    [1] http://support.lenovo.com/gb/en/products/laptops-a​nd-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5​...
    [2] http://support.lenovo.com/de/de/products/laptops-a​nd-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5​...

    Hello Klaus1,
    please take a look at this thread, where I postet alsmost the same question yesterday (Message 31) and my conclusion just minutes ago (Message 34).
    http://forums.lenovo.com/t5/ThinkPad-Edge-S-series​/E540-Fan-does-not-stop/m-p/1840680/highlight/fals​...
    Greetings,
    LenU

  • Lenovo power manager for windows 8 - installation freezes

    I installed Lenovo Power Management Driver (file: 7xua14ww.exe) and I would like to install also Power Manager utility  (file: 7xua14ww.exe) but I always get this message:
    "A more recent version of the program has been detected in the destination you have selected. If you continue, your previous installation will be overwritten. Do you want to continue?"
    When I press yes installation bar opens but does not move and installation freezes.
    Can somebody help me? Thanks a lot.
    P.S.. I´m using Thinkpad E530 with Windows 8 Home (64)
    Solved!
    Go to Solution.

    Why do you want to install that on your ThinkPad?  It's for ThinkCentre desktop computers, not ThinkPad laptops.
    I have Power Manager running fine on my X220, as I mentioned above.
    jason404 - X220 (my sixth ThinkPad)

  • T440s Power Manager vs Windows 8 Power Manager

    Hi guys,
    I have a T440s, 
    Is there much of a difference between the Lenovo Power Manager vs the Windows Power Manager?
    Thanks!

    Good day.
    There is no Windows 8x version of ThinkVantage Power Manager.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Thinkpad x240 Power manager for Windows 8 and 8.1

    Why is there a power manager program for Thinkpad x240 for Windows 8?

    rephase .. missing KEY word .. Why is there NO power manager program for the Thinkpad x240 on Windows 8?   There is one for Win 7.
    Great program, when I was on win 7 I used it all the time.

  • Thinkvanta​ge Power Manager on Windows 7

    Hi all,
    I recently upgraded from Windows Vista to Windows 7 Ultimate via a clean install.  With windows Vista (Business edition) I used to be able to left click on the battery icon in the tray and was able to choose my power option schemes and right-click to pull up a context menu.
    However, in Windows 7, the right-click context menu pops up, but when I left-click the power manger tray icon, the power scheme context menu doesn't pop up instead Power Mananger, the whole program executes.  Then I have to wait for the splash screen and then choose my power schemes. I tried the settings, but there is no option to activate the left-click power scheme menu from the power manger tray icon.
    Anybody know a solution?  Thanks

    I also miss that very much

  • Thininstaller - Power Manager fails to install on T410 - Windows 7 32bit

    I have a TVSU Repository set up and it has been working great for us.  I sometimes have to run the thininstaller command again after a machine images if the machine did a silent install of a BIOS upgrade the first time so other updates can't continue.  That is OK for now.
    My biggest concern is that thininstaller isn't installing the Power Manager in Windows 7 for our T410 laptops.  The following line is in the thininstaller log file:
    Info 2010-07-07 , 07:35:32
     at Tvt.FileDownloader.IndexRepositoryDownloader.Download(FileToDownloadBean bean)
     Message: the File to download is completed: \\server\d$\packages\drivers\lenovo\81u411ww\81u411ww_2_.xml
    However - it never actually gets installed. If I manually do an update:
    thininstaller /repository \\server\repository
    It scans through but says no products were found for my system.  That isn't right though, the Power Manager (81u411ww.exe) is available and applicable in the repository.
    I've delete this package from the repository and re-downloaded it and still the same issue.  This seems to be isolated to T410's (2518-F3U) units.
    Any idea why thininstaller isn't installing Power Manager?  I have full log files I can provide but I didn't want to spam this post.  Any help is appreciated.  Thanks.
    -Chris
    Solved!
    Go to Solution.

    Well, in case anyone else runs into this issue - I am getting around the issue by simply deleting the depencies on the package.  Now ThinInstaller is detecting it correctly on my machines.  I am not exactly sure what version of Power Manager introduced this issue but simply removing the dependencies works for us.

Maybe you are looking for

  • Problem with DAQmx and Real Time PCI-7041/6040E.

    Problem with DAQmx and Real Time PCI-7041/6040E. I have a problem with the Real Time card PCI-7041/6040E, I think it is properly installed because my software run with the traditional NI-DAQ. When I try to use the new DAQmx to acquire one signal, Lab

  • How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

    I have premier elements 12 How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

  • Crystal Reports in other languages ...

    Hi I'm new to crystal reporting my question is can crystal reports (v10 to be specific) present data in other languages like for example Arabic even though your data source is English language? More like translate this data to that language, Is it ju

  • B1iF: Message log errors

    My units are working fine: I can produce events  (or re-send it from the msglog) and their result messages will be shown in the log. I can't just see the "messages" within the  "Message Log" anymore. On the debug vbiu section i can still see the mess

  • Table Controls/Settings in VF02/VF03

    Hi, Is anyone aware of way to supress the Table Control icon on VF02 and VF03 using exits or a badi. We have a situation where we need to hide the Cost (WAVWR) field from certain users but not for the majority (we've hidden the cost in the pricing co