No power problem. Solution needed urgently.

I have a Compaq Presario F500. It has stopped taking a charge and I need to resolve urgently. The last couple of weeks the charger cable needed to be wiggled around to connect, I have checked the charger and all seems good there. I believe the problem lies with the DC jack on the laptop. Is this something that can be replaced easily? If so does anyone know what the part number is and the best place to source it.
Thanks
D.

Try here but you will need the exact model. The 500 can be a 500 - 505 with letters after it like EU:
http://www.laptopjacks.com/product1.php
You will have to fill in your model and they will also replace the jack for you for $100 I think. A single jack if you want to do it yourself will be about $30.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Similar Messages

I have a MacBook Pro 13.3 OS- MAC OS X LION.Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.

I have a MacBook Pro 13.3 OS- MAC OS X LION.
Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
Thank you for any help in this regard that comes fast.

The details of the kernel-panic report is as follows-
Interval Since Last Panic Report: 1458653 sec
Panics Since Last Report:          6
Anonymous UUID:                    70BA6A**************************************************
Sun Sep 16 23:00:13 2012
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
R8: 0xffffff80ef3d3f08, R9: 0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef3d3a50 : 0xffffff8000220792
0xffffff80ef3d3ad0 : 0xffffff80002c4794
0xffffff80ef3d3c80 : 0xffffff80002da55d
0xffffff80ef3d3ca0 : 0xffffff8000290560
0xffffff80ef3d3dc0 : 0xffffff800026c9c3
0xffffff80ef3d3f40 : 0xffffff80002c3fbb
0xffffff80ef3d3fb0 : 0xffffff80002da481
BSD process name corresponding to current thread: fsck_hfs
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 4850001132
last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
loaded kexts:
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2
com.apple.driver.AppleUSBTCButtons    227.6
com.apple.driver.AppleUSBTCKeyEventDriver    227.6
com.apple.driver.AppleUSBTCKeyboard    227.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.0.4
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AirPort.Brcm4331    560.7.21
com.apple.driver.AppleSDXC    1.2.2
com.apple.driver.AppleUSBHub    5.0.8
com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleAHCIPort    2.3.0
com.apple.driver.AppleUSBEHCI    5.0.7
com.apple.driver.AppleUSBXHCI    1.0.7
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleUSBBluetoothHCIController    4.0.7f2
com.apple.iokit.IOBluetoothFamily    4.0.7f2
com.apple.driver.AppleFileSystemDriver    13
com.apple.driver.AppleUSBMultitouch    230.5
com.apple.driver.AppleThunderboltDPInAdapter    1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.0.7
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.driver.AppleThunderboltNHI    1.6.0
com.apple.iokit.IOThunderboltFamily    2.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOUSBFamily    5.0.8
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.5
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4

Acrobat 8.2.4 update problem solution needs clarification

Could someone please clarify the solution offered at http://kb2.adobe.com/cps/861/cpsid_86169.html
Adobe Solution
Adobe has released an Acrobat 8.2.4 update via the auto-update mechanism for Adobe Acrobat 8.2.3 (CS3) for Mac OS. Adobe recommends that you check for updates by choosing Help > Check For Updates from the Acrobat menu bar.
File information
Filename: AcroFix824_Delivery.dmg
Usage notes
Double-click AcroFix824_Delivery.dmg to mount the disc image.
Open the mounted disc image and double click the AcroFix824 utility to run it.
In the Choose A File dialog box, browse to the Acrobat Professional application that you want to patch.
Enter the administrator credentials in Authenticate dialog box.
Click OK when the utility displays the Patched Successfully message.
My questions are:
After I had the problem with the 8.2.4 update, I restored my Acrobat Pro back to 8.2.3 using Time Machine. So I don't need a patch, I need a workable 8.2.4 update to 8.2.3.
So if I update to 8.2.4 using the above solution,
1. Does " choosing Help > Check For Updates" just install a patch to the original flawed update to 8.2.4?
(Since I am back to my 8.2.3 version, I presume a patch would not work, if this is the case.)
2. Or does the "Help > Check For Updates" update my 8.2.3 to the flawed 8.2.4 and then the the AcroFix824.dmg patches the flawed update?
3. Or does the "Help > Check For Updates" update my 8.2.3 to a working 8.2.4?
Thanks for your help in clarifying this. I keep getting auto update messges for 8.2.4 and I don't want to say yes to them if it still is a problem with auto update.

I followed Adobe's instructions and the flawed 8.2.4 is constantly crashing. I cannot believe the update is worst than the old version. I would recommend not to update until Adobe fixes this useless update.
Now I have to re-install the program again and make sure not to install the useless "new update".
Adobe is going from bad to worse!

Zoom problem(help needed urgently please )

friends,
i m working on a class in which there is one JPanel inside a JInternalFrame. i have functionalities like zoomin and zoomout. for that i m writing my code on mouse clicked of JPanel but my problem is that mouseClicked method is getting called several times even if i click once on JPanel and thus zooming the JPanel by a very large value.
please help me if u have any solution for it.Its very urgent.

You are still crossposting.
It would be a waste of everyone's time to answer you here, since quite likely others have already helped you elsewhere.

Zoom problem (help needed urgently)

friends,
i m working on a class in which there is one JPanel inside a JInternalFrame. i have functionalities like zoomin and zoomout. for that i m writing my code on mouse clicked of JPanel but my problem is that mouseClicked method is getting called several times even if i click once on JPanel and thus zooming the JPanel by a very large value.
please help me if u have any solution for it.Its very urgent.

it would be difficult to post complete code so i m posting the important part of my code related to this zoom problem.
public class PaintPanel extends JPanel implements MouseListener
     public Rectangle normalShape;
     public int initialX =0;
     public int initialY = 0;
     public int finalX = 0;
     public int finalY = 0;
     protected void paintComponent(Graphics g)
addMouseListener(this);
super.paintComponent(g);
scale = zoomvalue;
// System.out.println("scale value is " + scale);
Graphics2D g2d = (Graphics2D) g;
AffineTransform at = g2d.getTransform();
AffineTransform atnew = new AffineTransform();
atnew.scale(scale,scale);
at.concatenate(atnew);
// g2d.setTransform(at);
g2d.setTransform(at);
public void mouseClicked(MouseEvent e)
// get the position of mouse released
setCursor(new Cursor(Cursor.DEFAULT_CURSOR));
finalX = e.getX();
finalY = e.getY();
temploc3 = finalX;
temploc4 = finalY;
if(WellPlot.zoomFlag)
System.out.println("zoomvalue in mouseClicked " + zoomvalue);
zoomvalue += 0.1 ;
setZoom();
return;
}

I am have permission problems and need urgent help!

I am running ppc G5 dual 2gig with Tiger 10.4.11. I must say that ever since I upgraded to this version from 10.4.10 my system somehow has been behaving poorly. Ist my network settings went weird in the fact that the PC (running XP service Pack 2) stopped communicating with the G5 saying that it had no access permissions.
At the time I had Michael Horns SharePoints programme on the mac handling which hard drives I wanted to share over my network. I eventually took this off as I thought this might be the problem.
I went back to my Network set up on the G5 which had been working previously and tried the network setup Diagnostic tool which told me that from the G5 end it could see the PC and the internet through my BT Broad band Voyager 220V.
At this point I clicked the pad lock icon to save the settings. Now when I want to go back in to change the settings I can't. For the simple reason that it won't respond to the password or my Name. I have tried changing the password in the Accounts section of my system Preferences it allows me to seemingly do this but tells me that as my Key chain is locked it wants my current Password and Name which it is not responding to so I am going round in circles.
As a last desperate attempt I logged out and rebooted using my Tiger System disk, went into the Change the password section and did so. There it appeared like it was allowing me to change the password at which point to be extra safe I repaired the permissions on my home drive which again said it was repairing the permissions to the new user name and password so I thought at this point I was going to be all right after it gave me the green light to tell me that my permissions and disk verification were ok. I rebooted my mac and went into my system prefs, tried to open the padlock in the network settings as before only to come across the same problems.
Something is corrupt i guess. Do I need to reload Tiger and if so anything in the reloading part of the process which asks me for my name and password is going to screw me up as I am afraid the system won't accept it. PLEASE PLEASE PLEASE HELP ! And Many Thanks ahead of time.

Hello,
try to get into ROMMON (by restarting the router and pressing Ctrl + Del within 10 seconds), and then use the XMODEM procedure detailed below:
Xmodem Console Download Procedure Using ROMmon
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml
Regards,
GNT

HP Pavilion DV7-4180ea AC Power Problem (Really Need Help)

my hp pavilion dv7- 4180ea is a machine and a half, BUT, if i try to play a computer game, (without charger in) i can get 80 fps + on full settings, when i put my default hp charger in, the fps drops to 50 or 60 which is smooth, but it hiccups BADLY, e.g over a period of 10 seconds, 60fps------ 0---- 60fps----- it completely stops for 2 pr 3 seconds, ONLY WITH MY CHARGER IN, why?!

Bump.
Anybody? I called a service center and they said I need to replace the motherboard. Can this still be troubleshooted?

Problems Help needed URGENTLY

Hi
I have today updated to the latest software for my Nokia 5800 V 31.0.101 and now the ringtones and images that were pre installed seem to have gone also the facebook icon and games. I have tried to reinstall the software again but this did not work and also tried a hard reset on the phone this did not work either.
Please can you let me know if there is anyway to get these things back? Also is there anyway to downgrade back to the verison I was using before?

yes it will. also, if you don't like it, you can try on of these (one of them is the actual default facebook client) : http://store.ovi.com/content/6B505CF11830BD92E040050A85326355
The old firmware may have come bundled with different games, melodies and applications, however the default firmware configuration doesn't come with these stuff, that's why you're experiencing these problems now. But you can try browsing thru the Ovi Store, you might find the same old applications once again, for free, of course. Good luck!
If, from time to time, I actually give a good advice, please click on the Kudos icon, I have cookies and free hats!

Help needed Urgently- Rebate based on collected amount

Dear all,
I come across scenario while discussiion with client that they require rebate with collection. Details of the requirement are given below:
1. SAP rebates run on billed values & set the accrual in rebate agreement on the rate what we have specified in the rebate agreement. Requirement is that, If i have billed on 1000$ & my accrual value is 100$ with the rate of 10%. If i collected 800$ instead of 1000$, then i need to pay the accrual on the basis of 800$ not on the basis of 1000$. It means i have to adjust accrual amount on the basis of 800$. Conclusion is that i have to pay not 100$ accrual instead less then 100$ on the basis of 800$ which i collected.
2. In month 1 have billed on 5000$, my accrual amount is 500$ with rate of 10%. In the 2nd month i have to bill 1000$ and i have given an discount of 500$, it means my billed value is 500$ and my accrual amount is 50$@10%. In month 3 again i billed 500$ and my accrual amount is 50$@10%.
Requirement is that, when i am going to pay the accrual to client, i should pay correct accrual for which he is entitled for. Means i should pay 100$ accrual not 600$ because i have already given an discount of 500$. Discount which i have given already of 500$ should need to be offest with the first month accrual of 500$. So remaning accrual is 100$.
Great if somebody can help me out for the solutioning of the above requirements.

Thanks Ivano,
Somebody has started the conversation.
Let me put my questions again.
This requirement is nothing to do with Payment procedure in the agreement type.
1. In any month if i billed 1000$, so my account receivable would be 1000$. My rebate for that month is 100$ at the rate of 10%. During customer receipt if i collected against my invoice 900$ instead of 1000$, my accrual needs to be corrected 90$ instead of 100$.
I know this can not be fullfilled by standard SAP, by any thoughts on this welcomed.
2. I know Rebate can be settled partially or full settlement by payment method( by cheque, bank transfer, or by credit memo) we have configure in rebate agreement type. But here requirement is totally different.
Here, i need to pay the Rebate as a Discount instead of by cheque or by credit memo. While doing the partial or full settlement system will take into account collected accrual up to that day & apply as a discount to the final bill.
Scenario is like that sometimes customer asked to give us the discount on bill for whatever they accrued so far.
This is again cannot solved by standard SAP, but any thought by any body welcome. We have already thought that we need to enhance the solution.
Solution needed urgently.

Need Urgent Help in PM8M-V H problem - keyboard freeze

Hi everyone,
I'm a newbie in this forum and I really need urgent help with my motherboard.
My PC specification:
Intel Pentium 4 2.4GHz
MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
1GB(512MB x 2) Kingston PC3200 400MHz
Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
Power Color ATI Radeon 9550 256MB
Lite-On DVDRW SHM-165P6S
USB mouse, PS/2 Keyboard
I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows. Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?
I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
Thanks.

But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
What version of BIOS should I use?? Any recommendation ??
Thanks.

Nokia X3 Problem n need Solution

Nokia X3 Problem n need Solution :
the problem is,my nokia X3 ringtone sound so slow/soft...
n the keypad button sound more strong then ringtone sound,n two of them at the full volume...
but,i already put the volume to higher posible ( full volume )..

Some devices may need to have their software reset in order to see the latest benefits, or to resolve other potential problems. - Ensure you have the latest version of Nokia PC Suite. - Backup your device memory to your PC using Nokia PC Suite - Copy your files (music, videos, documents, images etc) from the Nokia N91 hard drive to your PC (use of USB mass storage recommended). - Copy any original SISX, Java, etc. installation files for your applications, themes, etc. from your Nokia N91 hard drive or memory card to your PC. (Do not simply copy over the installed directories/files.) - If your device has an internal hard drive, format your Nokia device’s hard drive by selecting Tools > Hard drive > Options > Format hard drive > Quick format (instructions are also in user the guide). - After the device has completely started up again, reset your device memory by selecting Menu > Tools > Settings > Phone > General > Orig. Phone Settings and entering 12345. - Restore your device memory from your PC using Nokia PC Suite by selecting Backup from the PC Suite menu and then selecting Restore. - Copy any hard drive or memory card contents from your memory card or PC back to your clean hard drive or memory card. - Re-install your applications/themes. If you find my post helpful please click the green star on the left under the avatar. Thanks.

Solution needed for Blocked material problem

Hi Guys,
Scenario : There are two plants in a Location(Plant A & B) and a Customer.Now the Material is blocked so that after the sales order the material will not be allowed to move from Plant A to B as well as the
material will not be moved to the customer end.
Solution needed : I need to move the blocked material from Plant A to Plant B,But the material shouldn't be transferred to the customer end.
How should I proceed for this problem?
Regards
Jino.

hi,
Theres a functionality in the material master...MRP view were u cld deifne theplant spcfc material status were u cld define the status and even u cld fnd it in Sales organisation data were u cld block for the particular functionality...
PLS check that and define as per u r reqmnt.. and try
Hope this helps u out
Regards,
sravanthi
Edited by: Sravanthi683 on Jun 22, 2009 1:45 PM

Oracle UCM/IPM Issue - Urgent Solution needed

Hi folks,
Solution needed for the below problem in oracle IPM/UCM cluster .
General Scenario :
The document checked in Oracle UCM can be viewed through IPM Viewer only if the security group of the document is set to a IPM Profile .
The IPM Profile is created in Oracle UCM Configuration Manager Component whenever a application is created in IPMServer .
Issue in Clustering :
IPMApplication created in host 1 is creating profile in UCM Component Manager of host 1 but not in UCM Host2 component manager (Vice Versa).
This affects url generations of checked in documents through proxy since the IPM profile is not available in cluster.
Scenario :
IPM MetaData UCM Component Manager(Profile)
Host1 Host2 Host1 Host2 Host1 Host2
IPM_APP_1 Visible Visible Visible Visible Not Visible
Visible IPM_APP_2 Visible Visible NotVisibe Visible

hi
Error Message is- "Invoiced quantity is greater than mother invoice quantity".
this error means your Depot invoice quantity is high, please check your mother invoice quantity, its means branch invoice quantity , and depot invoice quantity , is deferent so , please check both invoice quantity ,
and also check you migo,
ME21N-VL10B-VL02N-VF01-J1IIN-MIGO-VA01-VL01N-J1IJ-VF01, in this process you can do J1IG , Its process
me21n-vl10b-vl02n-vf01-j1iin-migo-j1ig-va01-vl01n-j1ij-vf01, this is process of depot sales, so please check this process

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sp

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sprymenu on my local browsers opera, google crome, and IE but when it is uploaded, the sprymenu squashes to the left hand side.

Please get your checkbook ready. (Only kidding.)
Have you ever done a hard factory reset of your Airport Express base? If not, then try it. Push down the reset button with a pen, then keep it depressed as you plug AX into the wall and keep holding it down until the green light blinks 4 times and then turns amber. Then let go. Unplug your broadband modem for a couple of minutes and shut down your Mac. First restart the modem, then the Mac. Use Airport Setup Assistant to set up a new network from scratch.
In System Prefs > Network > Show > Network Port Configurations drop n drag Airport to the top of the list and deselect all port configurations that you do not use.
That's a start.

Iphone 5 changes time randomly.. need urgent help!!

hi everybody .. i need urgent help to fix the problem of my iphone 5 ( IOS 7, Vodafone Germany) .. 2 weeks ago i noticed that the time on iphone was completely wrong and not related even to other time zones .. sometimes it freezed at the same minute for 1 hour .. sometimes it ran anticlockwise.. i switched off the automatic time setting..i made reset and erased all contents and reloaded all configuration from iCloud..the same problem.. i registered it as new iPhone .. no improvement... i switched off the WIFI..3G...i made reset using iTunes .. same error. same error... i took it to Apple store in Dresden- Germany and demostrated the problem there .. they told me that the problem beyond their knowledge and i have to contact apple support ... i sent the iPhone to Apple support in Netherland ... they sent it back on the next day coz they were not able to reproduce the problem...after regestering the iPhone again with my ID.. the same problem ... it's catastrophic coz many functions are time dependent (imessege, Calender, Email, etc.. )..and i cannot rely on my iPhone anymore... has anybody encountered the same problem in germany... and what is the solution?

If the phone is failing to charge, then there are three possibilities -
1) The charging cable is defective - does it work with anything else?
2) The power source is defective - unlikely since you have tried different ones with same result.
3) The phone has a hardware failure - which means you need to take to an Apple store or call them up for advice.

No power problem. Solution needed urgently.

Similar Messages

Maybe you are looking for