No power supply cable for second hard drive

Hard drive in PC is crashing mechanically.  Want to ghost a second hard drive before first drive crashes completely.   Bought duplicate of existing hard drive, but there is no power supply cable/connector for it.  Have SATA plug, but cannot power up second hard drive.  What do I do?
This question was solved.
View Solution.

LB1815, welcome to the forum.
If I understand your problem correctly, this is the connector that you need.  It converts a single SATA power cable to two connectors.  This allows you to connect two drives with on cable.  There are many other brands available on Newegg.  This is just one example.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • Dv7t rcvd. new 4/6/2011 need interface cable for 2nd hard drive

    Subject rcvd from HP with caddy for 2nd hdd installed. No cable supplied.  called HP parts store and was referred to sales and then referred to tech support.  After several hours of chat and musical hold time I'm still without for a source for  a much wanted interface ,Hdd to motherboard, cable. No help from newmodeus.com either.  This is not a standard
    esata cable and has to be an exact fit for allocated space.  If desired to install  SSD in this model an exact fit is needed. 

    My dv7t is in the mail and I have not got it yet, I asked support via email how to add a second hard drive and they said you just plug it in, I was skeptical and now that I see this post I can see I was right to be.  
    So I would also like to know how to add a second HDD or SSD to the dv7t and how to get all the necessary parts. 
    Please Help! 

  • Cable for 2nd Hard Drive bay for HP ENVY 17

    Hello everyone! I wanted to ask a question. I own an HP ENVY 17-J075EZ, and inside it there are two slots for hard disk including the primary already used from the hard disk ... Because I wanted to put a SSD but always keep the HDD, I wanted to know what it's called the second cable to connect a second hard drive and possibly the price and where to buy it! Thanks in advance!
    This question was solved.
    View Solution.

    Hi,
    Check the page 48, 49 and 50.
    http://h10032.www1.hp.com/ctg/Manual/c03922401
    Hard Drive Hardware Kit 720237-001

  • Volume needs repair message for second hard drive

    I am getting the following message on my second hard drive (This hard drive just has data. OS is on the main HD)
    Verifying volume “Mac Second HD”
    Invalid Volume Header
    Checking HFS Plus volume.
    Invalid number of allocation blocks
    The volume needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    Any advice on what to do? Can I save my data?
    G4 Silverline   Mac OS X (10.4.3)  

    Hi Ketan,
    Welcome to the Discussions.
    If Disk Utility can't repair it try DiskWarrior. It can repair most drive directory problems.
    John

  • Is the 65W power supply killing small laptop hard drives?

    Apple is NOT shipping 45W power supply units to my country (Costa Rica) and the authorized resellers are selling 65W power supply units to PowerBook 12" and iBooks owners, saying that older and smaller laptops can use the 65W unit without problems.
    In 1 month, 3 of my friends have lost their powerbook 12" hard drives, all of them were using 65W units.... is it possible that the 65W unit is damaging the hard drive?
    Apple documents don't mention any kind of problem related to using the wrong power supply, but doesn't say it's ok either.

    Well the authorized resellers are the ones you should
    take this up with. If they won't listen, call
    AppleCare. Computers are particularly sensitive to
    power supply variations. Here is one article which
    the resellers should read:
    http://docs.info.apple.com/article.html?artnum=75448
    I actually printed that document and went to the store to show them they were selling the wrong adapter, but they said Apple is no longer sending/selling 45W adapters to them and they said also that Apple gave them a memo saying that 65W adapters cause no troubles to smaller laptops.
    As you can see in the article there's no warning about using wrong adapters.
    Hard drives shouldn't be affected by power supply
    variations, and given the fact the computer only
    takes as much power as it needs, you are more likely
    to have a problem putting a 45 W adapter in a 65 W
    unit than vice versa.
    Even so, your friends could have all lucked out and
    gotten a single bad batch sent to Costa Rica.
    Yeah, this is absolutely possible, but what are the chances that the three laptops using wrong adapters had hard drive problems?...
    I basically want to know if this is happening on other countries (the "no 45W adapters" thing) and if also the hard drive problem could be related to the 65W one.
    Regardless, what happened to their original adapters?
    One guy lost it on a trip to the beach; the cable that goes to the computer was broken on the other two.
    Thanks for taking time to write this answer!

  • Need Step-by-Step Instructions for second hard drive just installed

    Hi. I am almost out of space on the hard drive that came with my G4 (I am using 114.49 of the 120 with Tiger) so I bought and installed in the second bay a 300 gb Maxtor. That' s all I have done so far. It shows up in the system profile and as a drive in the disk utility although when I restart the computer the message "the disk you inserted is not readable by this computer!" I assume this is because it is empty, not formatted or anything.
    I have an external bootable clone (firewire) of my original hard drive as back up.
    What I would like to do is use the original install/restore disks that came with it, the one with classic support as well, and install it on the new 300 drive. Then I would like to bring it up to date with Tiger and use my back up external drive to make the new 300 gb drive the main one I use for this computer. As for the other 120 gb one, the original one, could I then erase it and install Leopard on it so I can get to know that OS system over time?
    Do I need to partition the new drive to do any of this?
    What do I do and in what order? My head is spinning over this and I am frozen at this point...
    Any help would be greatly appreciated!

    Hi-
    First thing you need to do is to format the drive with Disk Utility. In Disk Utility/Erase, select your drive, select Mac OS Extended-Journaled, name your drive, select "Install OS 9 drivers" and click erase. That's all. Now it's ready to use.
    For a 300GB drive I see no need to partition.
    You can use your original install discs to install your OS, and then reinstall all your applications, and then transfer all your files, or, you could use a cloning utility such as SuperDuper! or Carbon Copy Cloner (I use and recommend SuperDuper!) and clone your current hard drive to your new hard drive.
    A clone is an exact, bootable duplicate of a source drive, and it will give you everything that you are used to , except you will have it on your new, larger drive.
    After an OS has been installed (clone or new install) on the new drive, in System Preferences/Startup Disk, select the new drive as Startup volume, and restart.
    After you are satisfied that all things are as they should be on the new drive, the smaller drive can be erased and have Leopard installed on it, as you suggest.

  • Adding and configuring a second hard drive in a Power Mac G4

    I am using a Power Mac G4 with the original 20GB hard drive and running OS 9.2.2.
    I would like to upgrade to 10.4 (Tiger) installing it on a 80 GB Seagate Ultra/ATA 100 which I need to install as a second hard drive.
    This is where my problem arises. From what I have read I cannot install OS 10 on a drive configured as SLAVE. On top of this Apple article ID 106728 has a note not to “change your Apple –installed disc drive to ATA ID-1 (slave) when adding other ATA devices.”
    Is this article correct or am I misunderstanding it? I was hoping I could just install the new drive on top of the original and switch the configurations of the drives making my original drive the SLAVE and the new drive MASTER and just install OS X on the new 80GB drive.
    Or can I put the new drive in the position of my original drive configure it as MASTER and put my original 20GB drive above it and configure it as slave?
    I am hoping someone can let me know if these configurations will work.
    Another question is: If I switch the position of my original drive will I lose access to the data on it?
    I would like to keep the OS systems on separate drives because I need to continue to run my old software and Heidelberg scanner (SCSI, running on LinoColor Elite 5.1 for which updated drivers are not available). This will not be possible in classic. I want OS X on the larger drive as I will be loading updated software eventually and it will become my main OS system.
    Power Mac G4 450GH, 768mb ram (AGP graphics )   Mac OS X (10.4)   Currently running 9.2 and will be upgrading to OS 10.4

    Hi, Thelisa -
    Welcome to Apple's Discussions.
    Is this article correct or am I misunderstanding it?
    Yes, to both - the article is correct, and yes, you seem to be misunderstanding it.
    In the context of the article, "Disc drive" does not mean a hard drive. Earlier in the article it states -
          Solution
          "Disc drive" refers to CD, CD-R, CD-RW, DVD, DVD-RAM, DVD-R, Combo drives, SuperDrives.
    The reason is that on most (if not all) G4s, an optical drive must be jumpered as Master in order for it to be a bootable drive. So, if an optical drive has been jumpered as Slave, it can not then be used to boot from the OSX Install disk.
    You will need to place the drive to be jumpered as Slave in the top position of the bracket (the drive sled), and the one jumpered as Master in the bottom position of the sled.
    The reason for this is the location of the connectors on the IDE ribbon cable (the data cable) - the one jumpered as Master needs to be attached to the end connector of the cable, and the one jumpered as Slave to the middle connector of the cable.
    Because of the physical limits of the cable itself, the one jumpered as Slave must be on top, else the connectors won't reach to the proper drive.
    Which drive is jumpered as which is your choice, but the one jumpered as Slave must be on top.
    If I switch the position of my original drive will I lose access to the data on it?
    No.
    The designation of Master or Slave is, for the most part, simply to allow the Mac to have a unique physical address for each drive, so it can tell one from the other (this is separate from the pathname addressing that the OS uses). Re-jumpering a drive nor changing its physical location will not affect its contents nor their usability.
    One result that may be important sometime is when the machine in question is set up as the Target machine in a firewire Target Disk Mode arrangement - only the drive jumpered as Master will be visible on the Host machine.
    Article #58583 - Firewire Target Disk Mode

  • Can I add a second hard drive and if so what cable etc would I need to do so?

    Can I add a second hard drive and if so what cable etc would I need to do so?
    This question was solved.
    View Solution.

    Hi,
    For many 17" (or 17.3") machines such as Envy 17, dv,  Pavilion 17 .... you can add a second HDD (my old loan dv7 has two HDD's and my current loan Envy 17 also has 2 HDD's). You would need the following kit:
        http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Second Hard drive for HP Pavilion dv-7 3157 ca

    I am looking at putting a second hard drive into my HP Pavilion dv-7 3157 ca, I know the first hard drive has a maximum size of 500 GB, but as for the second drive can it be 1 TB or is the total of both hard drive 1TB ie: 2x500 GB?
    A second question, looking for a link where I can buy the caddy, cable and hard drive, as this model is not common and the info out there is very confusing.
    Thanks for any help in this matter.
    Cheers 

    Hi tony2163,
    Welcome to the HP Forums! I saw your post regarding your Pavilion. You should be able to install a 1TB drive and I have the part number for Hard Drive Hardware Kit it is 517639-001. For more information about your product and breaking down the notebook go to the link below and click on the Maintenance and Service Guide.
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=4125923&
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it.

    I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
    Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I  desperate to get it back!
    Any help will he appreciated!

    disk0s2: I/O error.
    disk0s2: I/O error.
    The MBP's disk is damaged and requires replacement.
    Genius Bar Reservations: http://www.apple.com/retail/geniusbar/

  • Hello, I have a G5 PPC. I want to install a copy of Entourage on the second hard drive. Can I do that or will it create problems for the processor?

    Hi everyone
    I had a very old intel iMac from late 2006 which was dying now dead. I just managed to copy the Entourage folder onto an external hard drive before the iMac gave up the ghost. But I could not open the Entourage copy on the G5 PPC. each time i tried to do so the PPC copy of Entourage would open instead.I have emails on the PPC copy and do not want to lose them. I was wondering if it would be possible to install another copy of Entourage on the second hard drive? I was hoping that by doing that I could access the information from the iMac which has been copied to an external hard drive.
    Any help would be very very welcome.

    I don't think MS lets you install Entourage outside of an active system folder. However, you can install a fresh copy of Entourage on the G5's hard drive (if you have Office 2008 or lower), then use Entrouge's Import command to move the data files from the old hard drive.
    We're done this several times as we've upgraded either computers or Entourage.
    However, I think that, before you act, you should also ask in Microsoft's user forums here:
    Office for Mac forums
    They are excellent and often an employee of their Macintosh unit will assist in answering.

  • Can anyone recommend a second hard drive for my PowerPC G5

    Hi,
    Sorry if this question has been asked before but I need the answer in a hurry.
    I need to fit a second hard drive into my PowerPC G5 - and I have never done this before. I phoned a company to buy a drive and they said that there can be compatibility problems with certian drives and Macs. A friend at work also confirmed this and pointed me to the site www.xlr8yourmac.com which has a database of drives and their associated problems.
    Unfortunately I don't have time to digest all of the info. I am letting a friend use my Mac for a project that they are working on and they need the space urgently. They are working to a strict deadline.
    So basically what I would like to know is if anyone can recommend a drive that I can fit without it causing any problems. I need a high quality, fast and very quiet drive for audio and video production. The drive should be 250GB, 7200RPM, 16MB cache. The Mac support pages say it must be a serial ATA drive but I have no idea if you can use ATAII or ATA300 (or any other number???).
    Also - as I have never done this before - I have heard 'jumpers' mentioned - will I need to set the jumpers to a particular configuration?
    Thanks in advance, Byron.

    Xbench results as promised:
    System Info
    Xbench Version 1.1.3
    System Version 10.4.8 (8L127)
    Physical RAM 3072 MB
    Model PowerMac11,2
    Processor PowerPC G5x2 @ 2.00 GHz
    L1 Cache 64K (instruction), 32K (data)
    L2 Cache 1024K @ 2.00 GHz
    Bus Frequency 1 GHz
    Drive Type WDC WD1600JS-41MVB1 (Macintosh HD, 150GB)
    Disk Test 132.10
    Sequential 135.71
    Uncached Write 146.03 60.87 MB/sec [4K blocks]
    Uncached Write 128.75 52.72 MB/sec [256K blocks]
    Uncached Read 136.11 21.55 MB/sec [4K blocks]
    Uncached Read 133.10 53.78 MB/sec [256K blocks]
    Random 128.68
    Uncached Write 143.27 2.15 MB/sec [4K blocks]
    Uncached Write 165.80 37.39 MB/sec [256K blocks]
    Uncached Read 103.90 0.69 MB/sec [4K blocks]
    Uncached Read 118.36 24.36 MB/sec [256K blocks]
    Drive Type ST3250620AS (Seagate Barracuda 7200.10 250GB S300)
    Disk Test 103.68
    Sequential 123.43
    Uncached Write 59.04 24.61 MB/sec [4K blocks]
    Uncached Write 187.41 76.75 MB/sec [256K blocks]
    Uncached Read 214.15 33.90 MB/sec [4K blocks]
    Uncached Read 182.96 73.92 MB/sec [256K blocks]
    Random 89.38
    Uncached Write 53.68 0.81 MB/sec [4K blocks]
    Uncached Write 122.95 27.73 MB/sec [256K blocks]
    Uncached Read 96.28 0.64 MB/sec [4K blocks]
    Uncached Read 131.56 27.08 MB/sec [256K blocks]
    Drive Type Maxtor 6 B200P0 (Lacie, 200GB, Firewire 400, External)
    Disk Test 70.52
    Sequential 57.40
    Uncached Write 55.84 23.28 MB/sec [4K blocks]
    Uncached Write 46.40 19.00 MB/sec [256K blocks]
    Uncached Read 68.80 10.89 MB/sec [4K blocks]
    Uncached Read 63.74 25.75 MB/sec [256K blocks]
    Random 91.40
    Uncached Write 231.29 3.47 MB/sec [4K blocks]
    Uncached Write 75.37 17.00 MB/sec [256K blocks]
    Uncached Read 91.20 0.60 MB/sec [4K blocks]
    Uncached Read 65.76 13.53 MB/sec [256K blocks]
    Feel free to comment!
    PowerPC G5 Dual 2 Ghz   Mac OS X (10.4.8)  
    PowerPC G5 Dual 2 Ghz   Mac OS X (10.4.8)  

  • Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?

    Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?
    This question was solved.
    View Solution.

    Gurra wrote:
    Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?
    Hi,
    The right part number for the hard drive kit is 681976-001. The support website for the laptop is on HP Sweden so run the part number on google.co.uk (or your Swedish). I have found the cheapest on us amazon for $38 or £42. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • How do I use my second hard drive for storage, not back up?

    Hi, I bought a second hard drive to store files (not back-up for my system), but when I moved some files over to drive two and then deleted the same files from drive one, they also deleted from the 2nd drive! Fortunately I could reverse the process and there was no loss, but what now? How do I disconnect the two so I can use the second as storage? 
    Thanks and happy Easter for those of you who celebrate it. Kate (Porter)

    Whilst I normally drag files around, a copy and paste still should have created a replica on the destination drive.
    That the second is mounted internally makes my describing it as an external drive inaccurate, but wouldn't cause the problem.
    So that still leaves the scant possibility that the original source is itself an alias.
    Was the copy and paste done in a Finder window or was it done via some other application's window?
    I look forward to an update on this unusual event.

  • ADD A SECOND HARD DRIVE FOR WINDOWS

    Hi Folks
    I am a relatively new Mac user. My MacPro is my first Mac. So far, after 23 years on a PC, I am absolutely in heaven. I think my question may be very basic, but I like to ask before I jump.
    I have purchased a second hard drive and it is my intention to install it and run Windows on it. I want to keep on using some of the Windows applications that I have. I purchased the HD from Mac Mall and yesterday I pyhsically located it in it place in the case. I did not run any kind of installation routine, I just plugged it in. I did get a message, but I told the computer to ignore the drive for now.
    I also have Parallels. I am not sure if I even need that if I have a seperate drive. So, now you are getting an idea of my question. What do I do next?
    Can someone walk me through the installation of that second drive, coach me on whether or not I even need Parallels, and get me to the point where I can install Windows on the new drive?
    I sure would appreciate it?
    John Washbush
    Bloomington, Indiana

    Download Windows 7 64-bit free from MS.
    Pull your OS X drive.
    Boot from the DVD you burned from the ISO of Windows 7 RC.
    Install as normal.
    If you later want to run Windows side by side inside OS X then you would need Parallels or something.
    Windows will find drivers for most things and treat it as you did on PC.
    For OS X, I recommend this book:
    http://books.slashdot.org/books/08/02/27/1551206.shtml

Maybe you are looking for