No power to my Creative Inspire T6100 speakers.

I received my new speakers today and i was eagerly anticipating listening to them. I plugged them all in to the subwoofer and shoved the AC lead in to notice that there was no light on the power/volume speaker. I have tried a few things but have now ran out of ideas. Should i send them back? last thing i wanted when they arrived this morning. Any help is greatly appreciated
Message Edited by tenacious_tim on 01-05-2007 10:33 AM

Hi,
I ealier encountered your message in hope that there might be a reply, as i had the identical problem. I continuaslly tried many methods to try get the blue light on the speaker to come on, however in the end it was due to the connection between the main spaeaker and sub. Have a close look at the pins to ensure they're not bent, and fiddle with the connection, with a bit of luck mine suddenly appeared and i was rock and rolling. Im sorry if this doesn't work for you, but you could also check the transformer is warm to check the adaptor is working. Once your in, control panel, sound, advances setting and select 5.1 surround sound.

Similar Messages

Creative Inspire T6100 5.1 Speakers problem

Hello. I have Creative Inspire T6100 5.1 Speakers with SB Audigy Live! 24-bit installed Sound Card (it supports up to 7.1 speakers). Also I have Stereo Surround CMSS 3D settings (EAX)enabled. However when I'm listening to music or playing games my Rear Left speaker makes no sound. Before I had problem that Rear Right wasn't working (however rear left and right sound was on rear left speaker), but after replugging Rear Left doesn't work. Any ideas what might be the problem?
Thanks for reading...
EDIT:: I tried changing Rear Left and Rear Right speakers with each other in Subwoofer (where it connects) and Rear Left is working properly.
Message Edited by Ripiz on 03-15-2008 10:52 AM
Message Edited by Ripiz on 03-15-2008 10:57 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Creative Inspire T6100

my old creative set up has broke and now it is time to renew. my problem is.... i have a 5.1 decoder amp it sends the sound out separately to front L,R, back L,R, center and sub. this allows you to power them all separately. i am considering buying 2 sets of the creative inspire t6100 one set for the back L,R and one for the front L,R. and i would like to know what other users of the t6100 think of the system more to the point how many users have had problems. i am reserved on weather creative speakers last very long as my 2 sets of fps1600 have broke ( set the sub went and the other sounds like it is under water) and my 2.1 i-trigue 3200 (5 months old) (center speaker on my set up) is having problems with the wired remote. i am reluctant to switch companies as i think when working properly creative have an amazing sound. i would like to know if any one has any opinions on logitech (rival company if you will) as i have never heard anything from their speaker range. http://images.europe.creative.com/is.../dot-clear.gif

Hi
try cheking this link:
http://forums.creative.com/creativelabs/board/message?board.id=speakers&message.id=486&view=by_d ate_ascending&page=
and try do what is explained there
cumpz
PS: sorry my english

Creative Inspire T6100 - I got a problem, pls help me!

I just bought a creative Inspire T6100 system, but I got a strange problem.
I can hear just from the rear left and center speakers, all the others are muted. Every wire is perfectly connected to my phase 22 with 3 jack connectors. I tried to disable the basic soundblaster in the motherboard(I got an asus P5K), but it's the same... nothing changed...
Can someone help me pls?

Hi Freddy I read your problem , here I have a solution for you . If you are using your motherboards existing inbuilt sound card then you arerequired to check the balance level. to check balance level. to check the balance you please click on start > control pannel > then click on " sound & audio devices"? In this menu click on " Advance" here you will found balance level of both master volume & wave . checkbalance sould be at center level. secondly go into your cards application software and select 5.1 or 6.1 speakers,to check the sound take a headphone and attach each output of sound card if sound is coming both channels then it meanssound card is ok. Check your T6060 speakers audio leads should be fully Inserted into sound cards socket. If your are using creative sound card then set it to factory default setting and check the problem will be automaticaly solved. Creative T6060 speakers are 5.1 speakers & it requires proper sound card . It is recomended to install creative Sound blaster5.1 or Creative Audigy Value sound card for exelent performance. Harjinder KlerCyberstar Infocom LtdChandigarh

Creative Inspire T6100 Connection Problem ...

Hi,
I have just purchased the Creative Inspire T6100 and intended on using them for my Laptop, I am not so good with technology but I bought these speakers purely because of the good reviews it had.
The PROBLEM I have is that when I connect the 3 wires i.e. Black, Green and Orange , I only have space for one headphone jack on my Laptop as a result sound only comes through two of the fi've speakers. I realize that all 3 headphone jacks must be plugged into my laptop, but I simply do not know where to place the other two.
Therefore I was wandering is there some sort of device which would allow me to connect those 3 wires into my laptop. Perhaps some sort of 3 to converter
(Please remember I am a complete Novice on technology)
Any help would be appreciated.
Thank You

Hi Freddy I read your problem , here I have a solution for you . If you are using your motherboards existing inbuilt sound card then you arerequired to check the balance level. to check balance level. to check the balance you please click on start > control pannel > then click on " sound & audio devices"? In this menu click on " Advance" here you will found balance level of both master volume & wave . checkbalance sould be at center level. secondly go into your cards application software and select 5.1 or 6.1 speakers,to check the sound take a headphone and attach each output of sound card if sound is coming both channels then it meanssound card is ok. Check your T6060 speakers audio leads should be fully Inserted into sound cards socket. If your are using creative sound card then set it to factory default setting and check the problem will be automaticaly solved. Creative T6060 speakers are 5.1 speakers & it requires proper sound card . It is recomended to install creative Sound blaster5.1 or Creative Audigy Value sound card for exelent performance. Harjinder KlerCyberstar Infocom LtdChandigarh

Creative Inspire T6100 5.1 Speakers and Creative Vision M 30 GB

hey i wonder if you could help me, i would like to get some Creative Inspire T600 5.1 Speakers
for my vision m but i have read some reviews that you need 3 audio inputs to get all the speakers working so there isn't much point in buying them unless any of you know if there is an adapter or speakers like this in the same price range which will work fully with my vision m. also would these speakers work off a tv?thanks very much
Message Edited by big7george on 05-3-2007 04:24 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Help setting up Creative Inspire T6100 (5.1) to HP Laptop

Hi I recently bought Creative Inspire T600 (5.) speakers. I am unable to connect this to my HP DV6T laptop having only one input for speakers where as creative t600 has 3 pins in black, orange and green colors. I am stuck here. Could anyone please tell me how to connect the 5. speakers to my laptop? Appreciate your help.
Arun.K.S

Not really 100% sure (I only have a Creative T3030 2.1 that has a single 3.5mm jack) but from everything that I Googled, it looks like a stereo 3.5mm to RCA adapter and a Logitech 5.1 Game Console Adapter should work.
http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP/ref=pd_si m_e_5
http://www.amazon.com/Console-Adapter-Convert-Plugs-Single/dp/B0006U3ACY/ref=pd_ bxgy_e_img_b
But to be safe, it might be best to check with Creative and see what they recommend for connecting it to the iMac.
http://us.store.creative.com/Inspire-T6100/M/B000LIDLV6.htm
Dennis

AC Power cable for Creative Inspire 5.1 Console 5500D

After many years of happy useage my power adaptor has given up the ghost and you cant buy these any where for love nor money! Can someone please advise if I can buy another power cable from Creative which will work with these speakers. The model number on the adaptor is: TEAC-66-24900V AC ADAPTOR.
Many thanks in advance!
Message Edited by argenator77 on 09-13-2008 09:25 AM

See if this thread helps:
http://forums.creative.com/creativel...thread.id=4437

Probelm with Creative Inspire T6100

Hello everyone, I'll really appreciate it if someone could help here. Just bought a new PC with sound card on board.Motherboard is: GB P35-DS3 /P35/LGA775The sound card is Realtek High Definition Audio. Along wiht the PC I got a 5.1 channel speaker system - Creative Inspire T1600. I installed the latest drivers for the sound card, also made sure the speaker system is plugged into the sound card slots as per the user guide and yet there is no sound coming out at all from the speakers. I also tried plugging out the speaker system and plugging in a normal pair of headphones, still no sound?.... I have re-installed the sound drivers a few times and there is no indication the issue is with the driver. Please help. Thanks a lot

Hey, thanks for your reply but I've figured it out. It was a problem with the sound card driver... It works now and it's great!

Safety of the power supply of Creative Inspire 5200

The power specifications of the AC adapter of Creative Inspire 5200 shows 12V 4.2A. When I checked with multimeter it shows 12V only in the AC side of the multimeter. My younger son has the habit of pulling the power cord from the sub woofer and touching the pin of that adapter. Is it safe. I want to know whether The actual volatage should be shown in AC or DC in multimeter.

Hello,
i think you have your output-signal not in the loop. So you get only the start-value (0 Volt) and the end-value (25 Volt).
Here you have an example. You have to change the hardware-settings, but you can use the loop.
Regards
Markus Weigl
NI
Attachments:
Spannungsausgabe.vi ‏101 KB

Creative Inspire T6100 5.1 Speakers

Im looking at buying these speakers for my boyfreind, but will they be able to work with his tv and PS3. I was just wondering if any one new! many thanks beth

The line out on your mac is 2 channel stereo. There probably is a way to wire all the speakers together but you won't get 5.1 surround, which would be a waste of all those speakers.
I think your best option is to buy a good PCI sound card. The M-Audio Revolution 5.1 has good reviews, seems good value and probably addresses your problem.
Peter

Power supply for creative inspire 5.1 digital 5500

I have lost my power supply and i`m desperate to buy a new/old one. Does anybody have any idea how i can get one? 12 v 4.2 A. It`s 4 pin din 700 MA
Kindly Baard
Message Edited by bluetrack on 12-01-2006 01:17 PM

I have other problem too. I tried to play DVD movie with PowerDVD 6 and Center speaker doens't work if 6 channel or spdif audio is enabled on PowerDVD settings. No speech of any movies. When I change example 4 channel audio speech will play on center speaker. Creative Speaker Settings have 5.1 enabled. In games center speaker works properly. Serious Sam 2 is only game that I have played now and not working but it seems to be latest game patch problem. Latest patch disabled EAX effects.

Problems with my Creative Inspire 5300 speakers

Okay, the all used to work fine. When playing anything through windows media player, winamp, or anything else for that matter, all I get is sound from the rear speakers and the subwoofer. I have it set for 5.1 surround, so that's not the problem. When I go to the creative volume control and do the sound test, all the speakers seems to be working fine, except the only one that doesn't make sound in the test is the rear right speaker. But when listening to music or watching anything through windows media, the sub and rear left and right work fine, but no front or center.
Any help?

Do you have an X-Fi?
There is some sort of bug in the drivers of the X-Fi which causes the speaker channels to go haywire. It happened to me on two different PCs with two different X-Fis and two different types of speaker systems, one a home theatre system and another a set of PC speakers.
Fiddling with the speaker test in the THX console and the speaker settings applet fixed it. I didn't have to mess with the plugs.
However 'tis been working fine since then.

Creative inspire 5200 speakers

hello,
I am planning to buy a , i just wanna know if my motherboard buit in sound card can support these speakers. my board is a ECS KT600AL. I dont know if all sub and satellite will work on a Realtek ALC655 6-Channel audio CODEC which was the specification on my board. am really a newbie when it comes to these stuff. lastely is the creative 5200 can be connected directly to a TV or do i need a special connector or something. Am really looking forward in helping me regarding my prob. thanks in advance
gxtron

Hey budd the SoundBlaster Live 5.1 is a great sound card for what you want but I can't make that desicion but I can help you make it by telling you 2 things The Live 5.1 is a grate card but some of these new sound systems don't like some of the older cards and cause some of the channels to hiss and diffrent things so if you have a sound system that was made near the making of the Live 5.1 then the card shouldn't have any problems with the sound system.
blaster audigy LS on the other hand people are telling me this card is the shiznick hehe... I mean if I had a choice over prices and cards on detail in sound I would schoose the blaster audigy LS just because it's compatible with new sound systems, and grate in sound for DVD and Music and of course games hehe.
Ither choice you make will be good but like I said you will have to take chances on your sound system if you get the live 5.1 card .
I do hope this is what you were looking for also please update your drivers for the new card ounce you get it and also it would be good to update the bios.
Good Luck
Message Edited by RLemmon on 12-27-2004 03:26 AM

Inspire T6100 Speakers not found by the computer

Hi all, I have the X-Fi Sound Blaster Extreme Audio sound card. I then connected the speakers to the computer correctly as per the green/black/orange connections. The blue light is on, on the centre speaker representing power. However in the sound/speaker options my speakers are not shown. I fI am to conenct the audio cable from the monitor to the sound card then the speakers in the monitor work so it must be a speaker problem. Any Ideas? Thanks

The first step would be confirming the printer actually got fully connected without any issue by running a wireless test page. This should be under setup on the front panel of your printer, then wireless, then wireless test report. If this is all a pass you should be connected, but will also want to try loading the EWS of the printer to ensure the mac/ipad see it.
Under the same wireless menu you should see the IP address, or an option for view network summary that will show that address. Put that address in top the address bar of safari as if it was a website, but without WWW. If it loads that page you have communication, just not the communication you need for printing on apple devices.
If that loaded and you cannot see the printer to print, chances are something called multicasting is disabled. Apple devices use bonjour to communicate, which is a multicasting protocol. Generally this will have to be enabled without your routers settings so you may have to check the manual for the device, or contact the router manufacturer.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

No power to my Creative Inspire T6100 speakers.

Similar Messages

Maybe you are looking for